- 02 Jul, 2005 9 commits
-
-
James.Smart@Emulex.Com authored
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James.Smart@Emulex.Com authored
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by:
-
James.Smart@Emulex.Com authored
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by:
-
James.Smart@Emulex.Com authored
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by:
-
James.Smart@Emulex.Com authored
Add max_sectors to the driver host template and initialize it with 0xFFFF since the driver has no limitations on the size a transfer contained by a scsi command and that fits within the sg_tablesize provisioned by the driver. This fixes a performance issue seen in some configurations. Signed-off-by:
-
James.Smart@Emulex.Com authored
Bug reported via SourceForge - lpfc does not load on sparc. The lpfc driver must byteswap all FCP IOCBs to recover the data into cpu native format. Also correct issue of "iotag not found" messages Signed-off-by:
-
James.Smart@Emulex.Com authored
Analysis: Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which reads psli->mbox_active to determine the timeout mbox. Timeout handler then NULL's psli->mbox_active and calls lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls link_down(). link_down() now calls disc_done() which calls mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which goes back to read psli->mbox_active which is already NULL'ed. Remove redundant if statement in lpfc_mbox_timeout_handler. pmbox is assigned psli->mbox_active so there is no need to check if it actually equals psli->mbox_active. Signed-off-by:
-
James.Smart@Emulex.Com authored
Fix issue where all hosts connected to SAN get spammed with nodev message when other initiators go away. Display nodev message only when FC targets go away. However this behavior will be overridden if LOG_DISCOVERY is set. Signed-off-by:
-
James.Smart@Emulex.Com authored
From: Christoph Hellwig <hch@lst.de>: - rename PGP/HPH to lpfc_pgp/lpfc_hgp - use __le32 types for the members to start fixing sparse -Wbitwise issues - remove lpfc_sli.MBhostaddr, we can always use the pointer from SLI2_DESC directly Signed-off-by:
-
- 01 Jul, 2005 1 commit
-
-
Moore, Eric Dean authored
Convert driver to use new change_queue_depth API. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Fixed up rejections and Signed-off-by:
-
- 26 Jun, 2005 14 commits
-
-
James Bottomley authored
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: -
Christoph Hellwig authored
Signed-off-by: -
Christoph Hellwig authored
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: -
Christoph Hellwig authored
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: -
Christoph Hellwig authored
never checked anywhere Signed-off-by: -
Christoph Hellwig authored
Never used for anything but printing it out in debug routines. Signed-off-by: -
Christoph Hellwig authored
it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: -
James Bottomley authored
From: Christoph Hellwig <hch@lst.de> Patch fixed up and Signed-off-by: -
Mark Haverkamp authored
This patch add the following products to the driver: IBM ServeRAID 8i ICP 9014R0 ICP 9024R0 ICP 9047MA ICP 9087MA ICP 9085LI ICP 5085AU Signed-off-by:Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Christoph Hellwig authored
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: -
Nishanth Aravamudan authored
Use ssleep() instead of schedule_timeout to guarantee the task delays as expected. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Linus Torvalds authored
The parentheses were missing. Noted by Pavel Machek.
-
Linus Torvalds authored
-
Christoph Lameter authored
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by:
Christoph Lameter <christoph@lameter.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 25 Jun, 2005 16 commits
-
-
Adrian Bunk authored
Since kernel 2.6.3 the Kconfig text explicitely stated this driver was obsolete. (trolling for IBMers) Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Domen Puncer authored
Make code more readable with list_for_each_entry_safe. Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Adrian Bunk authored
There's no need for a function that only calls udelay. Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by:
-
Tobias Klauser authored
The files wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no document is "Linux WAN Router Utilities Package" and therefor the name wan-router.txt is more appropriate. Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Tobias Klauser authored
wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no Documentation/networking/00-INDEX as pointed out by Randy Dunlap. Signed-off-by:
-
Tobias Klauser authored
wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no drivers/net/wan/Kconfig. Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Tobias Klauser authored
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by:
-
Christophe Lucas authored
printk() calls should include appropriate KERN_* constant. Signed-off-by:
Christophe Lucas <clucas@rotomalug.org> Signed-off-by:
-
Christophe Lucas authored
printk() calls should include appropriate KERN_* constant. Signed-off-by:
-
