- 25 Jun, 2024 25 commits
-
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by:
Trevor Gamblin <tgamblin@baylibre.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
George Stark <gnstark@salutedevices.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Nuno Sa <nuno.sa@analog.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Dumitru Ceclan authored
Add support for AD4111/AD4112/AD4114/AD4115/AD4116. The AD411X family encompasses a series of low power, low noise, 24-bit, sigma-delta analog-to-digital converters that offer a versatile range of specifications. This family of ADCs integrates an analog front end suitable for processing both fully differential and single-ended, bipolar voltage inputs addressing a wide array of industrial and instrumentation requirements. - All ADCs have inputs with a precision voltage divider with a division ratio of 10. - AD4116 has 5 low level inputs without a voltage divider. - AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm shunt resistor. Signed-off-by:
Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by:
David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-9-97e3855900a0@analog.comSigned-off-by:
-
Dumitru Ceclan authored
The ADCs supported by this driver feature a sequencer that read in a loop all the enabled chanels. When setting the individual sampling frequency for each channel and enabling multiple channels, the effective of each channel will be lower than the actual set value. Document this behaviour in a comment. Reviewed-by:
-
Dumitru Ceclan authored
Drop setting .has_temp and .has_input_buf to false in device info struct. Drop array of device info structs and use individual structs for all; drop models enum as no longer needed. This improves readability as the structs are pointed directly. Reviewed-by:
-
Dumitru Ceclan authored
Add support for selecting REF+ and REF- inputs on all models. Add support for selecting ((AVDD1 − AVSS)/5) inputs on supported models. Signed-off-by:
-
Dumitru Ceclan authored
Move validation of analog inputs and reference voltage selection to separate functions to reduce the size of the channel config parsing function and improve readability. Add defines for the number of analog inputs in a channel. Signed-off-by:
-
Dumitru Ceclan authored
Move configurations regarding number of channels from *_fw_parse_device_config to *_fw_parse_channel_config. Suggested-by:
-
Dumitru Ceclan authored
Sigma delta ADCs with a sequencer need to disable the previously enabled channel when reading using ad_sigma_delta_single_conversion(). This was done manually in drivers for devices with sequencers. This patch implements handling of single channel disabling after a single conversion. Reviewed-by:
-
- 22 Jun, 2024 8 commits
-
-
Dumitru Ceclan authored
Add support for: AD4111, AD4112, AD4114, AD4115, AD4116. AD411x family ADCs support a VCOM pin. The purpose of this pin is to offer a dedicated common-mode voltage input for single-ended channels. This pin is specified as supporting a differential channel with VIN10 on model AD4116. AD4111/AD4112 support current channels. Support is implemented using single-channel and "adi,current-channel". Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Dumitru Ceclan authored
There are ADCs that are differential but support to measure single-ended signals on the same channels by connecting a constant voltage to the negative input pin. This property allows to properly define a single-ended channel that requires two inputs to be specified. Software can use the presence of this property to mark the channel as not differential. Reviewed-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() function to reduce boilerplate code. Signed-off-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() function to reduce boilerplate code. Signed-off-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() function to reduce boilerplate code. Signed-off-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() function to reduce boilerplate code. Signed-off-by:
-
Alisa-Dariana Roman authored
Clean up by using a local variable struct device *dev. Also use dev_err_probe where possible. Signed-off-by:
Alisa-Dariana Roman <alisa.roman@analog.com> Link: https://patch.msgid.link/20240613114001.270233-2-alisa.roman@analog.comSigned-off-by:
-
Trevor Gamblin authored
The current error handling for calls such as devm_clk_get_enabled() in the adi-axi-adc probe() function means that, if a property such as 'clocks' (for example) is not present in the devicetree when booting a kernel with the driver enabled, the resulting error message will be vague, e.g.: |adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2 Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and devm_iio_backend_register() checks to use dev_err_probe() with some context for easier debugging. After the change: |adi_axi_adc 44a00000.backend: error -ENOENT: failed to get clock |adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2 Signed-off-by:
-
- 17 Jun, 2024 1 commit
-
-
Greg Kroah-Hartman authored
We need the char-misc and iio fixes in here as well to build on top of. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 Jun, 2024 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "On parisc we have suffered since years from random segfaults which seem to have been triggered due to cache inconsistencies. Those segfaults happened more often on machines with PA8800 and PA8900 CPUs, which have much bigger caches than the earlier machines. Dave Anglin has worked over the last few weeks to fix this bug. His patch has been successfully tested by various people on various machines and with various kernels (6.6, 6.8 and 6.9), and the debian buildd servers haven't shown a single random segfault with this patch. Since the cache handling has been reworked, the patch is slightly bigger than I would like in this stage, but the greatly improved stability IMHO justifies the inclusion now" * tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Try to fix random segmentation faults in package builds
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two fixes to correctly report i2c functionality, ensuring that I2C_FUNC_SLAVE is reported when a device operates solely as a slave interface" * tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Fix the functionality flags of the slave-only interface i2c: at91: Fix the functionality flags of the slave-only interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.10-rc4. Included in here are: - thunderbolt debugfs bugfix - USB typec bugfixes - kcov usb bugfix - xhci bugfixes - usb-storage bugfix - dt-bindings bugfix - cdc-wdm log message spam bugfix All of these, except for the last cdc-wdm log level change, have been in linux-next for a while with no reported problems. The cdc-wdm bugfix has been tested by syzbot and proved to fix the reported cpu lockup issues when the log is constantly spammed by a broken device" * tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages xhci: Handle TD clearing for multiple streams case xhci: Apply broken streams quirk to Etron EJ188 xHCI host xhci: Apply reset resume quirk to Etron EJ188 xHCI host xhci: Set correct transferred length for cancelled bulk transfers usb-storage: alauda: Check whether the media is initialized usb: typec: ucsi: Ack also failed Get Error commands kcov, usb: disable interrupts in kcov_remote_start_usb_softirq dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected usb: typec: ucsi: glink: increase max ports for x1e80100 Revert "usb: chipidea: move ci_ulpi_init after the phy initialization" thunderbolt: debugfs: Fix margin debugfs node creation condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes that resolve som reported problems. Included in here are: - n_tty lookahead buffer bugfix - WARN_ON() removal where it was not needed - 8250_dw driver bugfixes - 8250_pxa bugfix - sc16is7xx Kconfig fixes for reported build issues All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: drop debugging WARN_ON_ONCE() from uart_write() serial: sc16is7xx: re-add Kconfig SPI or I2C dependency serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE serial: port: Don't block system suspend even if bytes are left to xmit serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level serial: 8250_dw: Revert "Move definitions to the shared header" serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw tty: n_tty: Fix buffer offsets when lookahead is used
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fix from Greg KH: "Here is a single staging driver fix, for the vc04 driver. It resolves a reported problem that showed up in the merge window set of changes. It's been in linux-next for over a week with no reported problems" * tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
-
