- 25 Oct, 2017 5 commits
-
-
Jens Axboe authored
If an IO scheduler is selected via elevator= and it doesn't match the driver in question wrt blk-mq support, then we fail to boot. The elevator= parameter is deprecated and only supported for non-mq devices. Augment the elevator lookup API so that we pass in if we're looking for an mq capable scheduler or not, so that we only ever return a valid type for the queue in question. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Ilya Dryomov authored
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to permit trying WRITE SAME on older SCSI devices, unless ->no_write_same is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO: $ fallocate -zn -l 1k /dev/sdg fallocate: fallocate failed: Remote I/O error $ fallocate -zn -l 1k /dev/sdg # OK $ fallocate -zn -l 1k /dev/sdg # OK The following calls succeed because sd_done() sets ->no_write_same in response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing __blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios. This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if sd_done() has just set ->no_write_same thus indicating lack of offload support. Fixes: c20cfc27 ("block: stop using blkdev_issue_write_same for zeroing") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case. Reviewed-by:
-
Ilya Dryomov authored
Check for CAP_SYS_ADMIN before calling into the driver, similar to blkdev_flushbuf(). This is safer and can spare a check in the driver. (Currently BLKROSET is overridden by md and rbd, rbd is missing the check. md has the check, but it covers a lot more than BLKROSET.) Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dmitry Monakhov authored
It is reasonable drop page cache on discard, otherwise that pages may be written by writeback second later, so thin provision devices will not be happy. This seems to be a security leak in case of secure discard case. Also add check for queue_discard flag on early stage. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
-
- 24 Oct, 2017 1 commit
-
-
Javier González authored
A previous patch inadvertently left an unused test function in the header, kill it. Fixes: 8bd40020 ("lightnvm: pblk: cleanup unused and static functions") Signed-off-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
-
- 17 Oct, 2017 2 commits
-
-
Omar Sandoval authored
When we're getting a domain token, if we fail to get a token on our first attempt, we put the current hardware queue on a wait queue and then try again just in case a token was freed after our initial attempt but before we got on the wait queue. If this second attempt succeeds, we currently leave the hardware queue on the wait queue. Usually this is okay; we'll just run the hardware queue one extra time when another token is freed. However, if the hardware queue doesn't have any other requests waiting, then when it it gets the extra wakeup, it won't have anything to free and therefore won't wake up any other hardware queues. If tokens are limited, then we won't make forward progress and the device will hang. Reported-by:
Bin Zha <zhabin.zb@alibaba-inc.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the null_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 2984c868 ("nullb: factor disk parameters") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 16 Oct, 2017 17 commits
-
-
Randy Dunlap authored
Sphinx treats symbols that end with '_' as a kind of special documentation indicator, so fix that by adding an ending '*' to it. ../block/bio.c:404: ERROR: Unknown target name: "gfp". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Michael Lyle authored
Sorry this got through to linux-block, was detected by the kbuilds test robot. NSEC_PER_SEC is a long constant; 2.5 * 10^9 doesn't fit in a signed long constant. Fixes: e41166c5 ("bcache: writeback rate shouldn't artifically clamp") Reviewed-by:
Coly Li <colyli@suse.de> Signed-off-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
-
Michael Lyle authored
Also add URL for IRC channel. Signed-off-by:
-
Kent Overstreet authored
Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
-
Liang Chen authored
The use of the union reduces the size of closure struct by taking advantage of the current size of its members. The offset of func in work_struct equals the size of the first three members, so that work.work_func will just reference the forth member - fn. This is smart but dangerous. It can be broken if work_struct or the other structs get changed, and can be a bit difficult to debug. Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
-
Michael Lyle authored
The time spent searching for things to write back "counts" for the actual rate achieved, so don't flush the accumulated rate with each chunk. This will maintain better fidelity to user-commanded rates, but it may slightly increase the burstiness of writeback. The writeback lock needs improvement to help mitigate this. Signed-off-by:
-
Michael Lyle authored
The previous code artificially limited writeback rate to 1000000 blocks/second (NSEC_PER_MSEC), which is a rate that can be met on fast hardware. The rate limiting code works fine (though with decreased precision) up to 3 orders of magnitude faster, so use NSEC_PER_SEC. Additionally, ensure that uint32_t is used as a type for rate throughout the rate management so that type checking/clamp_t can work properly. bch_next_delay should be rewritten for increased precision and better handling of high rates and long sleep periods, but this is adequate for now. Signed-off-by:
-
Michael Lyle authored
This works in conjunction with the new PI controller. Currently, in real-world workloads, the rate controller attempts to write back 1 sector per second. In practice, these minimum-rate writebacks are between 4k and 60k in test scenarios, since bcache aggregates and attempts to do contiguous writes and because filesystems on top of bcachefs typically write 4k or more. Previously, bcache used to guarantee to write at least once per second. This means that the actual writeback rate would exceed the configured amount by a factor of 8-120 or more. This patch adjusts to be willing to sleep up to 2.5 seconds, and to target writing 4k/second. On the smallest writes, it will sleep 1 second like before, but many times it will sleep longer and load the backing device less. This keeps the loading on the cache and backing device related to writeback more consistent when writing back at low rates. Signed-off-by:
-
Michael Lyle authored
bcache uses a control system to attempt to keep the amount of dirty data in cache at a user-configured level, while not responding excessively to transients and variations in write rate. Previously, the system was a PD controller; but the output from it was integrated, turning the Proportional term into an Integral term, and turning the Derivative term into a crude Proportional term. Performance of the controller has been uneven in production, and it has tended to respond slowly, oscillate, and overshoot. This patch set replaces the current control system with an explicit PI controller and tuning that should be correct for most hardware. By default, it attempts to write at a rate that would retire 1/40th of the current excess blocks per second. An integral term in turn works to remove steady state errors. IMO, this yields benefits in simplicity (removing weighted average filtering, etc) and system performance. Another small change is a tunable parameter is introduced to allow the user to specify a minimum rate at which dirty blocks are retired. There is a slight difference from earlier versions of the patch in integral handling to prevent excessive negative integral windup. Signed-off-by:
-
Michael Lyle authored
If an IO operation fails, and we didn't successfully read data from the cache, don't writeback invalid/partial data to the backing disk. Signed-off-by:
-
Yijing Wang authored
Parameter bio is no longer used, clean it. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Reviewed-by:
-
Eric Wheeler authored
Flag for bypass if the IO is for read-ahead or background, unless the read-ahead request is for metadata (eg, from gfs2). Bypass if: bio->bi_opf & (REQ_RAHEAD|REQ_BACKGROUND) && !(bio->bi_opf & REQ_META)) Writeback if: op_is_sync(bio->bi_opf) || bio->bi_opf & (REQ_META|REQ_PRIO) Signed-off-by:Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by:
-
Yijing Wang authored
set_capacity() has been called in bcache_device_init(), remove the redundant one. Signed-off-by:
-
Coly Li authored
Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: -
Coly Li authored
Code comments in alloc.c:bch_alloc_sectors() mentions a function name find_data_bucket(), the correct function name should be pick_data_bucket() indeed. bch_alloc_sectors() is a quite important function in bcache allocation code, fixing the typo may help other people to have less confusion. Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Signed-off-by:
-
Coly Li authored
In bcache code, sysfs entries are created before all resources get allocated, e.g. allocation thread of a cache set. There is posibility for NULL pointer deference if a resource is accessed but which is not initialized yet. Indeed Jorg Bornschein catches one on cache set allocation thread and gets a kernel oops. The reason for this bug is, when bch_bucket_alloc() is called during cache set registration and attaching, ca->alloc_thread is not properly allocated and initialized yet, call wake_up_process() on ca->alloc_thread triggers NULL pointer deference failure. A simple and fast fix is, before waking up ca->alloc_thread, checking whether it is allocated, and only wake up ca->alloc_thread when it is not NULL. Signed-off-by:
Jorg Bornschein <jb@capsec.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Peter Foley authored
Fixes below error with clang: ../drivers/md/bcache/sysfs.c:759:3: error: function definition is not allowed here { return *((uint16_t *) r) - *((uint16_t *) l); } ^ ../drivers/md/bcache/sysfs.c:789:32: error: use of undeclared identifier 'cmp' sort(p, n, sizeof(uint16_t), cmp, NULL); ^ 2 errors generated. v2: rename function to __bch_cache_cmp Signed-off-by:Peter Foley <pefoley2@pefoley.com> Reviewed-by:
-
- 14 Oct, 2017 1 commit
-
-
Yafang Shao authored
This patch is the followup of the prvious patch: [writeback: schedule periodic writeback with sysctl]. There's another issue to fix. For example, - When the tunable was set to one hour and is reset to one second, the new setting will not take effect for up to one hour. Kicking the flusher threads immediately fixes it. Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
-
- 13 Oct, 2017 14 commits
-
-
weiping zhang authored
This parameter provide an option to disable io scheduler when nullb* in multi-queue mode. Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
weiping zhang authored
update the range of submits_queues, and correct usage hints. Signed-off-by:
-
Jens Axboe authored
Christoph correctly points out that this issue is no different for other block devices, and poking at cross layer internals is not the right way to solve it. This reverts commit bb6aa6f0. Signed-off-by:
-
Javier González authored
Implement a generic path for sending sync I/O on LightNVM. This allows to reuse the standard synchronous path trough blk_execute_rq(), instead of implementing a wait_for_completion on the target side (e.g., pblk). Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
-
Javier González authored
Make LightNVM passhtrough commands fail fast. User space will then take care of re-submitting. Fixes: 84d4add7 ('lightnvm: add ioctls for vector I/Os') Signed-off-by:
-
Javier González authored
The amount of GC I/O on the write buffer is managed by the rate-limiter, which is calculated as a function of the number of available free blocks. When reaching the stable point, we risk having scheduled more I/Os for GC than are allowed on the write buffer. This would result on the GC semaphore balancing the outstanding read GC I/Os to be reported as "hung", though the behavior is normal. Solve this by allowing to schedule when we detect that the read GC path is not moving forward. Signed-off-by:
-
Javier González authored
Cleanup up unused and static functions across the whole codebase. Signed-off-by:
-
Hans Holmberg authored
Lockdep complains about being in atomic context while freeing line metadata - and rightly so as we take a spinlock and end up calling vfree that might sleep(in pblk_mfree). There is no need for holding the line manager free_lock while freeing line metadata as the pipeline as stopped, so remove the lock. Fixes: 588726d3 ("lightnvm: pblk: fail gracefully on irrec. error") Signed-off-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by:
-
Hans Holmberg authored
During garbage collect, lbas being written can end up being invalidated. Make sure that this is reflected in the valid lba count. Signed-off-by:
-
Hans Holmberg authored
Finish garbage collect of the lines that are in the gc pipeline before exiting. Ensure that all lines already in in the pipeline goes through, from read to write. Do this by keeping track of how many lines are in the pipeline and waiting for that number to reach zero before exiting the gc reader task. Since we're adding a new gc line counter, change the name of inflight_gc to read_inflight_gc to make the distinction clear. Signed-off-by:
-
Hans Holmberg authored
Print the CRC of the logical-to-physical mapping during exit and after recovering the L2P table to facilitate detection of meta data corruption/recovery issues. The CRC printed after recovery should match the CRC printed during the previous exit - if it doesn't this indicates that either the meta data written to the disk is corrupt or recovery failed. Signed-off-by:
-
Hans Holmberg authored
Shut down the GC workqueues and tasks in the right order. Signed-off-by:
-
Hans Holmberg authored
When recovering lines we need to consider that bad blocks in a line affect the emeta area size. Previously it was assumed that the emeta area would grow by the number of sectors per page * number of bad blocks in the line. This assumption is not correct - the number of "extra" pages that are consumed could be both smaller (depending on emeta size) and bigger (depending on the placement of the bad blocks). Fix this by calculating the emeta start by iterating backwards through the line, skipping ppas that map to bad blocks. Also fix the data types used for ppa indices/counts in pblk_recov_l2p_from_emeta - we should use u64. Signed-off-by:
-
Hans Holmberg authored
Start GC if needed, directly after init, as we might need to garbage collect in order to make room for user writes. Create a helper function that allows to kick GC without exposing the internals of the GC/rate-limiter interaction. Signed-off-by:
-
