- 14 May, 2019 40 commits
-
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit bb9e5c5b ] The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f ("m68k: Mac DP8390 update") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 273160ff ] sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit cc4807bb ] Commit ad6c9986 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by:
Suanming.Mou <mousuanming@huawei.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 89e41309 ] When a dual stack tcp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or tcp_v6_iif() helper. Fixes: 1397ed35 ("ipv6: add flowinfo for tcp6 pkt_options for all cases") Fixes: df3687ff ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Maxime Chevallier authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit a4dc6a49 ] When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600 ("packet: Add fanout support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 1602f49b upstream. [This commit was a merge, but it added hlist_add_tail_rcu(), which is what we need in this stable tree, so I've changed the subject to be more descriptive - gregkh] Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit e5dcc0c3 ] rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 398f0132 ] Since commit fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller found that that triggers a warning: [ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0 [ 21.101490] Modules linked in: [ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146 [ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630 [ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3 [ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246 [ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000 [ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000 [ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67 [ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d [ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d [ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000 [ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0 [ 21.115367] Call Trace: [ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0 [ 21.116362] alloc_pages_current+0xac/0x1e0 [ 21.116923] kmalloc_order+0x18/0x70 [ 21.117393] kmalloc_order_trace+0x18/0x110 [ 21.117949] packet_set_ring+0x9d5/0x1770 [ 21.118524] ? packet_rcv_spkt+0x440/0x440 [ 21.119094] ? lock_downgrade+0x620/0x620 [ 21.119646] ? __might_fault+0x177/0x1b0 [ 21.120177] packet_setsockopt+0x981/0x2940 [ 21.120753] ? __fget+0x2fb/0x4b0 [ 21.121209] ? packet_release+0xab0/0xab0 [ 21.121740] ? sock_has_perm+0x1cd/0x260 [ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0 [ 21.123013] ? __fget+0x324/0x4b0 [ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320 [ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0 [ 21.124908] ? __lock_acquire+0x529/0x3200 [ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70 [ 21.126075] ? __sys_setsockopt+0x131/0x210 [ 21.126533] ? packet_release+0xab0/0xab0 [ 21.127004] __sys_setsockopt+0x131/0x210 [ 21.127449] ? kernel_accept+0x2f0/0x2f0 [ 21.127911] ? ret_from_fork+0x8/0x50 [ 21.128313] ? do_raw_spin_lock+0x11b/0x280 [ 21.128800] __x64_sys_setsockopt+0xba/0x150 [ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560 [ 21.129769] do_syscall_64+0x9f/0x450 [ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe We should allocate with __GFP_NOWARN to handle this. Cc: Kal Conley <kal.conley@dectris.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: fc62814d ("net/packet: fix 4gb buffer limit due to overflow check") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Bjorn Helgaas authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit fae846e2 ] The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit e0aa6770 ] When a dual stack dccp listener accepts an ipv4 flow, it should not attempt to use an ipv6 header or inet6_iif() helper. Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Signed-off-by:
-
Bhadram Varka authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit a830405e ] Currently stmmac driver not copying the valid ethernet MAC address to MAC registers. This patch takes care of updating the MAC register with MAC address. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 4ef8c1c9 ] Ilan reported that sometimes nl80211 messages weren't working if the frames being transported got very large, which was really a problem for userspace-to-kernel messages, but prompted me to look at the code. Upon review, I found various places where variable-length data is transported in an nl80211 message but the message isn't allocated taking that into account. This shouldn't cause any problems since the frames aren't really that long, apart in one place where two (possibly very long frames) might not fit. Fix all the places (that I found) that get variable length data from the driver and put it into a message to take the length of the variable data into account. The 100 there is just a safe constant for the remaining message overhead (it's usually around 50 for most messages.) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Chaotian Jing authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 987aa5f8 ] with CONFIG_HZ=100, the precision of jiffies is 10ms, and the generic_cmd6_time of some card is also 10ms. then, may be current time is only 5ms, but already timed out caused by jiffies precision. Signed-off-by:
Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 99a50777 ] The rtc-lib dependency is not required, and seems it was just copy-pasted from ARM's Kconfig. If platform requires rtc-lib, they should select it individually. Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Christoffer Dall authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit ace6033e ] User space Android code identifies pixclock == 0 as a sign for emulation and will set the frame rate to 60 fps when reading this value, which is the desired outcome. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Signed-off-by:
Roman Kiryanov <rkir@google.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Lianwei Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 01b41159 ] When cpu_hotplug_enable() is called unbalanced w/o a preceeding cpu_hotplug_disable() the code emits a warning, but happily decrements the disabled counter. This causes the next operations to malfunction. Prevent the decrement and just emit a warning. Signed-off-by:
Lianwei Wang <lianwei.wang@gmail.com> Cc: peterz@infradead.org Cc: linux-pm@vger.kernel.org Cc: oleg@redhat.com Link: http://lkml.kernel.org/r/1465541008-12476-1-git-send-email-lianwei.wang@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Xerox Lin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 207707d8 ] When rndis data transfer is in progress, some Windows7 Host PC is not sending the GET_ENCAPSULATED_RESPONSE command for receiving the response for the previous SEND_ENCAPSULATED_COMMAND processed. The rndis function driver appends each response for the SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted, the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset. As the rndis response queue is not freed, the previous response is sent as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host block any more Rndis transfers. Hence free the rndis response queue as a part of this soft-reset so that the correct response for REMOTE_NDIS_RESET_MSG is sent properly during the response command. Signed-off-by:
Rajkumar Raghupathy <raghup@codeaurora.org> Signed-off-by:
Xerox Lin <xerox_lin@htc.com> [AmitP: Cherry-picked this patch and folded other relevant fixes from Android common kernel android-4.4] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Winter Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit cee51c33 ] There may be a race condition if f_fs calls unregister_gadget_item in ffs_closed() when unregister_gadget is called by UDC store at the same time. this leads to a kernel NULL pointer dereference: [ 310.644928] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 310.645053] init: Service 'adbd' is being killed... [ 310.658938] pgd = c9528000 [ 310.662515] [00000004] *pgd=19451831, *pte=00000000, *ppte=00000000 [ 310.669702] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 310.675211] Modules linked in: [ 310.678294] CPU: 0 PID: 1537 Comm: ->transport Not tainted 4.1.15-03725-g793404c #2 [ 310.685958] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 310.692493] task: c8e24200 ti: c945e000 task.ti: c945e000 [ 310.697911] PC is at usb_gadget_unregister_driver+0xb4/0xd0 [ 310.703502] LR is at __mutex_lock_slowpath+0x10c/0x16c [ 310.708648] pc : [<c075efc0>] lr : [<c0bfb0bc>] psr: 600f0113 <snip..> [ 311.565585] [<c075efc0>] (usb_gadget_unregister_driver) from [<c075e2b8>] (unregister_gadget_item+0x1c/0x34) [ 311.575426] [<c075e2b8>] (unregister_gadget_item) from [<c076fcc8>] (ffs_closed+0x8c/0x9c) [ 311.583702] [<c076fcc8>] (ffs_closed) from [<c07736b8>] (ffs_data_reset+0xc/0xa0) [ 311.591194] [<c07736b8>] (ffs_data_reset) from [<c07738ac>] (ffs_data_closed+0x90/0xd0) [ 311.599208] [<c07738ac>] (ffs_data_closed) from [<c07738f8>] (ffs_ep0_release+0xc/0x14) [ 311.607224] [<c07738f8>] (ffs_ep0_release) from [<c023e030>] (__fput+0x80/0x1d0) [ 311.614635] [<c023e030>] (__fput) from [<c014e688>] (task_work_run+0xb0/0xe8) [ 311.621788] [<c014e688>] (task_work_run) from [<c010afdc>] (do_work_pending+0x7c/0xa4) [ 311.629718] [<c010afdc>] (do_work_pending) from [<c010770c>] (work_pending+0xc/0x20) for functions using functionFS, i.e. android adbd will close /dev/usb-ffs/adb/ep0 when usb IO thread fails, but switch adb from on to off also triggers write "none" > UDC. These 2 operations both call unregister_gadget, which will lead to the panic above. add a mutex before calling unregister_gadget for api used in f_fs. Signed-off-by:
Winter Wang <wente.wang@nxp.com> Signed-off-by:
-
Hannes Frederic Sowa authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit dcb94b88 ] IPv6 ping socket error handler doesn't correctly convert the new 32 bit mtu to host endianness before using. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 389b6699 ] Currently, stm_register_device() makes the device visible and then proceeds to initializing spinlocks and other properties, which leaves a window when the device can already be opened but is not yet fully operational. Fix this by reversing the initialization order. Reported-by:
Alan Cox <alan.cox@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Laurent Fert <laurent.fert@intel.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit cbe4a61d ] Currently, the error path of stm_register_device() forgets to unregister the chrdev. Fix this. Reported-by:
-
James Morse authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit f6cf0545 ] Some architectures require code written to memory as if it were data to be 'cleaned' from any data caches before the processor can fetch them as new instructions. During resume from hibernate, the snapshot code copies some pages directly, meaning these architectures do not get a chance to perform their cache maintenance. Modify the read and decompress code to call flush_icache_range() on all pages that are restored, so that the restored in-place pages are guaranteed to be executable on these architectures. Signed-off-by:
James Morse <james.morse@arm.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Rafael J. Wysocki <rjw@rjwysocki.net> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> [will: make clean_pages_on_* static and remove initialisers] Signed-off-by:
-
James Morse authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 81226455 ] page.h uses '_AC' in the definition of PAGE_SIZE, but doesn't include linux/const.h where this is defined. This produces build warnings when only asm/page.h is included by asm code. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit dcb10a96 ] When ring buffer's AUX area is unmapped and rb->aux_mmap_count drops to zero, new AUX transactions into this buffer can still be started, even though the buffer in en route to deallocation. This patch adds a check to perf_aux_output_begin() for rb->aux_mmap_count being zero, in which case there is no point starting new transactions, in other words, the ring buffers that pass a certain point in perf_mmap_close will not have their events sending new data, which clears path for freeing those buffers' pages right there and then, provided that no active transactions are holding the AUX reference. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1457098969-21595-2-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jeff Mahoney authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit b4201cc4 ] This fixes: net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function target_metric is only consumed when reply = true so no bug exists here, but not all versions of gcc realize it. Initialize to 0 to remove the warning. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Ard Biesheuvel authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit b660950c ] The implementation of macro inv_entry refers to its 'el' argument without the required leading backslash, which results in an undefined symbol 'el' to be passed into the kernel_entry macro rather than the index of the exception level as intended. This undefined symbol strangely enough does not result in build failures, although it is visible in vmlinux: $ nm -n vmlinux |head U el 0000000000000000 A _kernel_flags_le_hi32 0000000000000000 A _kernel_offset_le_hi32 0000000000000000 A _kernel_size_le_hi32 000000000000000a A _kernel_flags_le_lo32 ..... However, it does result in incorrect code being generated for invalid exceptions taken from EL0, since the argument check in kernel_entry assumes EL1 if its argument does not equal '0'. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Lorenzo Pieralisi authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 1b9bdf5c ] The code enabled by the ARM_CPU_SUSPEND config option is used by kernel subsystems for purposes that go beyond system suspend so its config entry should be augmented to take more default options into account and avoid forcing its selection to prevent dependencies override. To achieve this goal, this patch reworks the ARM_CPU_SUSPEND config entry and updates its default config value (by adding the BL_SWITCHER option to it) and its dependencies (ARCH_SUSPEND_POSSIBLE), so that the symbol is still selected by default by the subsystems requiring it and at the same time enforcing the dependencies correctly. Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Greg Hackmann authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 45321507 ] We do actually need slab.h, by luck we get it on other platforms but not always on ARM. Include it properly. Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Jin Qian <jinqian@android.com> Signed-off-by:
Alan <alan@linux.intel.com> Signed-off-by:
-
Rajmal Menariya authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 1328d8ef ] In carveout heap, change minimum allocation order from 12 to PAGE_SHIFT. After this change each bit in bitmap (genalloc - General purpose special memory pool) represents one page size memory. Cc: sprd-ind-kernel-group@googlegroups.com Cc: sanjeev.yadav@spreadtrum.com Cc: Colin Cross <ccross@android.com> Cc: Android Kernel Team <kernel-team@android.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Rajmal Menariya <rajmal.menariya@spreadtrum.com> [jstultz: Reworked commit message] Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Rom Lemarchand authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 90a2f171 ] Include <linux/types.h> into ashmem.h to ensure referenced types are defined Cc: Android Kernel Team <kernel-team@android.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
Rom Lemarchand <romlem@android.com> [jstultz: Minor commit message tweaks] Signed-off-by:
-
Laura Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 18e77054 ] Both ashmem_mmap and ashmem_shrink take the ashmem_lock. It may be possible for ashmem_mmap to invoke ashmem_shrink: -000|mutex_lock(lock = 0x0) -001|ashmem_shrink(?, sc = 0x0) <--- try to take ashmem_mutex again -002|shrink_slab(shrink = 0xDA5F1CC0, nr_pages_scanned = 0, lru_pages -002|= -002|124) -003|try_to_free_pages(zonelist = 0x0, ?, ?, ?) -004|__alloc_pages_nodemask(gfp_mask = 21200, order = 1, zonelist = -004|0xC11D0940, -005|new_slab(s = 0xE4841E80, ?, node = -1) -006|__slab_alloc.isra.43.constprop.50(s = 0xE4841E80, gfpflags = -006|2148925462, ad -007|kmem_cache_alloc(s = 0xE4841E80, gfpflags = 208) -008|shmem_alloc_inode(?) -009|alloc_inode(sb = 0xE480E800) -010|new_inode_pseudo(?) -011|new_inode(?) -012|shmem_get_inode(sb = 0xE480E800, dir = 0x0, ?, dev = 0, flags = -012|187) -013|shmem_file_setup(?, ?, flags = 187) -014|ashmem_mmap(?, vma = 0xC5D64210) <---- Acquire ashmem_mutex -015|mmap_region(file = 0xDF8E2C00, addr = 1772974080, len = 233472, -015|flags = 57, -016|sys_mmap_pgoff(addr = 0, len = 230400, prot = 3, flags = 1, fd = -016|157, pgoff -017|ret_fast_syscall(asm) -->|exception -018|NUR:0x40097508(asm) ---|end of frame Avoid this deadlock by using mutex_trylock in ashmem_shrink; if the mutex is already held, do not attempt to shrink. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Android Kernel Team <kernel-team@android.com> Reported-by:
Matt Wagantall <mattw@codeaurora.org> Reported-by:
Syed Rameez Mustafa <rameezmustafa@codeaurora.org> Reported-by:
Osvaldo Banuelos <osvaldob@codeaurora.org> Reported-by:
Subbaraman Narayanamurthy <subbaram@codeaurora.org> Signed-off-by:
Laura Abbott <lauraa@codeaurora.org> [jstultz: Minor commit message tweaks] Signed-off-by:
-
Mark Rutland authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 3694bd76 ] Currently __set_fixmap_offset is a macro function which has a local variable called 'addr'. If a caller passes a 'phys' parameter which is derived from a variable also called 'addr', the local variable will shadow this, and the compiler will complain about the use of an uninitialized variable. To avoid the issue with namespace clashes, 'addr' is prefixed with a liberal sprinkling of underscores. Turning __set_fixmap_offset into a static inline breaks the build for several architectures. Fixing this properly requires updates to a number of architectures to make them agree on the prototype of __set_fixmap (it could be done as a subsequent patch series). Signed-off-by:
-
Eric Long authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 61390593 ] The dma_alloc_coherent return an "void *" not an "void __iomen *". It uses the wrong parameters when calls dma_free_coherent function. The sparse tool output logs as the following: coresight-tmc.c:199:23: expected void *<noident> coresight-tmc.c:199:23: got void [noderef] <asn:2>*vaddr coresight-tmc.c:336:30: warning: incorrect type in assignment (different address spaces) coresight-tmc.c:336:30: expected char *buf coresight-tmc.c:336:30: got void [noderef] <asn:2>* coresight-tmc.c:769:50: warning: incorrect type in argument 4 (different base types) coresight-tmc.c:769:50: expected unsigned long long [unsigned] [usertype] dma_handle coresight-tmc.c:769:50: got restricted gfp_t Signed-off-by:
Eric Long <eric.long@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Eric Long authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit bf16e5b8 ] "DEVICE_ATTR_RO(name)" should be defined as static. And there is an unnecessary space at the front of the code. The sparse tool output logs as the following: coresight-etm4x.c:2224:1: warning: symbol 'dev_attr_trcoslsr' was not declared. Should it be static? coresight-etm4x.c:2225:1: warning: symbol 'dev_attr_trcpdcr' was not declared. Should it be static? coresight-etm4x.c:2226:1: warning: symbol 'dev_attr_trcpdsr' was not declared. Should it be static? And the smatch tool output logs as the following: of_coresight.c:89 of_coresight_alloc_memory() warn: inconsistent indenting Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit b4ca34aa ] There is a window in stm_source_link_drop(), during which the source's link may change before locks are acquired. When this happens, it throws a warning, since this is not an expected scenario. This patch handles the race in such a way that if the link appears to have changed by the time we took the locks, it will release them and repeat the whole unlinking procedure from the beginning, unless the other contender beat us to it. Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit f7c81c71 ] STM code takes references to the stm device and its module for the duration of the character device's existence or the stm_source link. Dropping these references is not well balanced everywhere, which may lead to leaks. This patch balances the acquisition and releasing of these two references and annotates each site so that it's easier to verify correctness by reading the code. Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit cde4ad83 ] It is possible to concurrently assign the same output (a character device writer or an stm_source device) to different stm devices, which sets off a strategically placed warning in stm_output_assign(). To avoid this, use a spinlock to serialize (un)assignments between outputs and stm devices. Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 1810f2c4 ] If an illegal attempt is made to unlink stm source device from an stm device, the stm device's link spinlock mistakenly remains locked. While this really shouldn't happen (there's a warning in place), the locking should remain in order so that we can still recover from this situation if it indeed does happen. This patch unifies the unlocking in the exit path of __stm_source_link_drop() to fix this. Reported-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit 59be422e ] By convention, the name of the stm policy directory in configfs consists of the device name to which it applies and the actual policy name, separated by a dot. Now, some devices already have dots in their names that separate name of the actual device from its instance identifier. Such devices will result in two (or more, who can tell) dots in the policy directory name. Existing policy code, however, will treat the first dot as the one that separates device name from policy name, therefore failing the above case. This patch makes the last dot in the directory name be the separator, thus prohibiting dots from being used in policy names. Suggested-by:
Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1826212 [ Upstream commit f08b1826 ] Currently, the character device write method allocates a temporary buffer for user's data, but the user's data size is not sanitized and can cause arbitrarily large allocations via kzalloc() or an integer overflow that will then result in overwriting kernel memory. This patch trims the input buffer size to avoid these issues. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
