apic->send_IPI_allbutself() takes a vector number as argument.

APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is
outside the vector space.

Use NMI_VECTOR instead as that's what it is intended to be.

Fixes: 82da3ff8 ("x86: kgdb support")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105218.855189979@linutronix.de

Pick up core changes on which the APIC IPI cleanups and shorthand support
series depends on.

A reboot request sends an IPI via the reboot vector and waits for all other
CPUs to stop. If one or more CPUs are in critical regions with interrupts
disabled then the IPI is not handled on those CPUs and the shutdown hangs
if native_stop_other_cpus() is called with the wait argument set.

Such a situation can happen when one CPU was stopped within a lock held
section and another CPU is trying to acquire that lock with interrupts
disabled. There are other scenarios which can cause such a lockup as well.

In theory the shutdown should be attempted by an NMI IPI after the timeout
period elapsed. Though the wait loop after sending the reboot vector IPI
prevents this. It checks the wait request argument and the timeout. If wait
is set, which is true for sys_reboot() then it won't fall through to the
NMI shutdown method after the timeout period has finished.

This was an oversight when the NMI shutdown mechanism was added to handle
the 'reboot IPI is not working' situation. The mechanism was added to deal
with stuck panic shutdowns, which do not have the wait request set, so the
'wait request' case was probably not considered.

Remove the wait check from the post reboot vector IPI wait loop and enforce
that the wait loop in the NMI fallback path is invoked even if NMI IPIs are
disabled or the registration of the NMI handler fails. That second wait
loop will then hang if not all CPUs shutdown and the wait argument is set.

[ tglx: Avoid the hard to parse line break in the NMI fallback path,
  	add comments and massage the changelog ]

Fixes: 7d007d21 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/20190628122813.15500-1-ghalat@redhat.com

The IPI code of x86 needs to evaluate whether the target cpumask is equal
to the cpu_online_mask or equal except for the calling CPU.

To replace the current implementation which requires the usage of a
temporary cpumask, which might involve allocations, add a new function
which compares a cpumask to the result of two other cpumasks which are
or'ed together before comparison.

This allows to make the required decision in one go and the calling code
then can check for the calling CPU being set in the target mask with
cpumask_test_cpu().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105220.585449120@linutronix.de

The booted once information which is required to deal with the MCE
broadcast issue on X86 correctly is stored in the per cpu hotplug state,
which is perfectly fine for the intended purpose.

X86 needs that information for supporting NMI broadcasting via shortcuts,
but retrieving it from per cpu data is cumbersome.

Move it to a cpumask so the information can be checked against the
cpu_present_mask quickly.

No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.818822855@linutronix.de

Pull parisc fixes from Helge Deller:

 - Fix build issues when kprobes are enabled

 - Speed up ITLB/DTLB cache flushes when running on machines with
   combined TLBs

* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
  parisc: add kprobe_fault_handler()

Pull preemption Kconfig fix from Thomas Gleixner:
 "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined
  PREEMPT outside of the menu and made it selectable by both PREEMPT_LL
  and PREEMPT_RT.

  Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which
  obviously can't work anymore. oldconfig builds are affected as well,
  but it's more obvious as the user gets asked. [old]defconfig silently
  fixes it up and selects PREEMPT_NONE.

  Unbreak it by undoing the rename and adding a intermediate config
  symbol which is selected by both PREEMPT and PREEMPT_RT. That requires
  to chase down a few #ifdefs, but it's better than tweaking 114
  defconfigs and annoying users"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y

Pull pidfd polling fix from Christian Brauner:
 "A fix for pidfd polling. It ensures that the task's exit state is
  visible to all waiters"

* tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  pidfd: fix a poll race when setting exit_state

Pull btrfs fixes from David Sterba:

 - fixes for leaks caused by recently merged patches

 - one build fix

 - a fix to prevent mixing of incompatible features

* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't leak extent_map in btrfs_get_io_geometry()
  btrfs: free checksum hash on in close_ctree
  btrfs: Fix build error while LIBCRC32C is module
  btrfs: inode: Don't compress if NODATASUM or NODATACOW set

The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to
CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y
set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on
the preemption mode choice wich defaults to NONE. This also affects
oldconfig builds.

So rather than changing 114 defconfig files and being an annoyance to
users, revert the rename and select a new config symbol PREEMPTION. That
keeps everything working smoothly and the revelant ifdef's are going to be
fixed up step by step.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: a50a3f4b ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull media fixes from Mauro Carvalho Chehab:
 "For two regressions in media core:

   - v4l2-subdev: fix regression in check_pad()

   - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already
     in use"

* tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use
  media: v4l2-subdev: fix regression in check_pad()

Pull networking fixes from David Miller:

 1) Several netfilter fixes including a nfnetlink deadlock fix from
    Florian Westphal and fix for dropping VRF packets from Miaohe Lin.

 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore
    proper block sharing.

 3) Fix r8169 PHY init from Thomas Voegtle.

 4) Fix memory leak in mac80211, from Lorenzo Bianconi.

 5) Missing NULL check on object allocation in cxgb4, from Navid
    Emamdoost.

 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn.

 7) Check that there is actually an ip header to access in skb->data in
    VRF, from Peter Kosyh.

 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang.

 9) One more tweak the the TCP fragmentation memory limit changes, to be
    less harmful to applications setting small SO_SNDBUF values. From
    Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  tcp: be more careful in tcp_fragment()
  hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()
  vrf: make sure skb->data contains ip header to make routing
  connector: remove redundant input callback from cn_dev
  qed: Prefer pcie_capability_read_word()
  igc: Prefer pcie_capability_read_word()
  cxgb4: Prefer pcie_capability_read_word()
  be2net: Synchronize be_update_queues with dev_watchdog
  bnx2x: Prevent load reordering in tx completion processing
  net: phy: sfp: hwmon: Fix scaling of RX power
  net: sched: verify that q!=NULL before setting q->flags
  chelsio: Fix a typo in a function name
  allocate_flower_entry: should check for null deref
  net: hns3: typo in the name of a constant
  kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.
  tipc: Fix a typo
  mac80211: don't warn about CW params when not using them
  mac80211: fix possible memory leak in ieee80211_assign_beacon
  nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
  nl80211: fix VENDOR_CMD_RAW_DATA
  ...

There is a race between reading task->exit_state in pidfd_poll and
writing it after do_notify_parent calls do_notify_pidfd. Expected
sequence of events is:

CPU 0                            CPU 1
------------------------------------------------
exit_notify
  do_notify_parent
    do_notify_pidfd
  tsk->exit_state = EXIT_DEAD
                                  pidfd_poll
                                     if (tsk->exit_state)

However nothing prevents the following sequence:

CPU 0                            CPU 1
------------------------------------------------
exit_notify
  do_notify_parent
    do_notify_pidfd
                                   pidfd_poll
                                      if (tsk->exit_state)
  tsk->exit_state = EXIT_DEAD

This causes a polling task to wait forever, since poll blocks because
exit_state is 0 and the waiting task is not notified again. A stress
test continuously doing pidfd poll and process exits uncovered this bug.

To fix it, we make sure that the task's exit_state is always set before
calling do_notify_pidfd.

Fixes: b53b0b9d ("pidfd: add polling support")
Cc: kernel-team@android.com
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org
[christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie]
Signed-off-by: Christian Brauner <christian@brauner.io>

There is a lot of infrastructure for functionality which is used
exclusively in __{save,restore}_processor_state() on the suspend/resume
path.

cr8 is an alias of APIC_TASKPRI, and APIC_TASKPRI is saved/restored by
lapic_{suspend,resume}().  Saving and restoring cr8 independently of the
rest of the Local APIC state isn't a clever thing to be doing.

Delete the suspend/resume cr8 handling, which shrinks the size of struct
saved_context, and allows for the removal of both PVOPS.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20190715151641.29210-1-andrew.cooper3@citrix.com

The APIC, per spec, is fundamentally confused and thinks that interrupt
vectors 16-31 are valid.  This makes no sense -- the CPU reserves vectors
0-31 for exceptions (faults, traps, etc).  Obviously, no device should
actually produce an interrupt with vector 16-31, but robustness can be
improved by setting the APIC TPR class to 1, which will prevent delivery of
an interrupt with a vector below 32.

Note: This is *not* intended as a security measure against attackers who
control malicious hardware.  Any PCI or similar hardware that can be
controlled by an attacker MUST be behind a functional IOMMU that remaps
interrupts.  The purpose of this change is to reduce the chance that a
certain class of device malfunctions crashes the kernel in hard-to-debug
ways.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/dc04a9f8b234d7b0956a8d2560b8945bcd9c4bf7.1563117760.git.luto@kernel.org

Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.

We should allow these flows to make progress.

This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.

It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15

Note for < 4.15 backports :
 tcp_rtx_queue_tail() will probably look like :

static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk)
{
	struct sk_buff *skb = tcp_send_head(sk);

	return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk);
}

Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jonathan Looney <jtl@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an extra rcu_read_unlock left in netvsc_recv_callback(),
after a previous patch that removes RCU from this function.
This patch removes the extra RCU unlock.

Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).

Case:

1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.

So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.
Signed-off-by: Peter Kosyh <p.kosyh@gmail.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A small cleanup: this callback is never used.
Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com>
for OpenVZ7 bug OVZ-6877

cc: stanislav.kinsburskiy@gmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.

Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.

Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.

Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As pointed out by Firo Yang, a netdev tx timeout may trigger just before an
ethtool set_channels operation is started. be_tx_timeout(), which dumps
some queue structures, is not written to run concurrently with
be_update_queues(), which frees/allocates those queues structures. Add some
synchronization between the two.

Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes an issue seen on Power systems with bnx2x which results
in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb
pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons
load in bnx2x_tx_int. Adding a read memory barrier resolves the issue.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.

With this change in place, sensors(1) and ethtool -m agree:

sff2-isa-0000
Adapter: ISA adapter
in0:          +3.23 V
temp1:        +33.1 C
power1:      270.00 uW
power2:      200.00 uW
curr1:        +0.01 A

        Laser output power                        : 0.2743 mW / -5.62 dBm
        Receiver signal average optical power     : 0.2014 mW / -6.96 dBm

Reported-by: chris.healy@zii.aero
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: David S. Miller <davem@davemloft.net>

In function int tc_new_tfilter() q pointer can be NULL when adding filter
on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after
filter creation, following NULL pointer dereference happens in case parent
block is shared:

[  212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  212.925445] #PF: supervisor write access in kernel mode
[  212.925709] #PF: error_code(0x0002) - not-present page
[  212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0
[  212.926302] Oops: 0002 [#1] SMP KASAN PTI
[  212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G    B             5.2.0+ #512
[  212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40
[  212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f
b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8
[  212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296
[  212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[  212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297
[  212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d
[  212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040
[  212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680
[  212.929999] FS:  00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000
[  212.930235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0
[  212.930588] Call Trace:
[  212.930682]  ? tc_del_tfilter+0xa40/0xa40
[  212.930811]  ? __lock_acquire+0x5b5/0x2460
[  212.930948]  ? find_held_lock+0x85/0xa0
[  212.931081]  ? tc_del_tfilter+0xa40/0xa40
[  212.931201]  rtnetlink_rcv_msg+0x4ab/0x5f0
[  212.931332]  ? rtnl_dellink+0x490/0x490
[  212.931454]  ? lockdep_hardirqs_on+0x260/0x260
[  212.931589]  ? netlink_deliver_tap+0xab/0x5a0
[  212.931717]  ? match_held_lock+0x1b/0x240
[  212.931844]  netlink_rcv_skb+0xd0/0x200
[  212.931958]  ? rtnl_dellink+0x490/0x490
[  212.932079]  ? netlink_ack+0x440/0x440
[  212.932205]  ? netlink_deliver_tap+0x161/0x5a0
[  212.932335]  ? lock_downgrade+0x360/0x360
[  212.932457]  ? lock_acquire+0xe5/0x210
[  212.932579]  netlink_unicast+0x296/0x350
[  212.932705]  ? netlink_attachskb+0x390/0x390
[  212.932834]  ? _copy_from_iter_full+0xe0/0x3a0
[  212.932976]  netlink_sendmsg+0x394/0x600
[  212.937998]  ? netlink_unicast+0x350/0x350
[  212.943033]  ? move_addr_to_kernel.part.0+0x90/0x90
[  212.948115]  ? netlink_unicast+0x350/0x350
[  212.953185]  sock_sendmsg+0x96/0xa0
[  212.958099]  ___sys_sendmsg+0x482/0x520
[  212.962881]  ? match_held_lock+0x1b/0x240
[  212.967618]  ? copy_msghdr_from_user+0x250/0x250
[  212.972337]  ? lock_downgrade+0x360/0x360
[  212.976973]  ? rwlock_bug.part.0+0x60/0x60
[  212.981548]  ? __mod_node_page_state+0x1f/0xa0
[  212.986060]  ? match_held_lock+0x1b/0x240
[  212.990567]  ? find_held_lock+0x85/0xa0
[  212.994989]  ? do_user_addr_fault+0x349/0x5b0
[  212.999387]  ? lock_downgrade+0x360/0x360
[  213.003713]  ? find_held_lock+0x85/0xa0
[  213.007972]  ? __fget_light+0xa1/0xf0
[  213.012143]  ? sockfd_lookup_light+0x91/0xb0
[  213.016165]  __sys_sendmsg+0xba/0x130
[  213.020040]  ? __sys_sendmsg_sock+0xb0/0xb0
[  213.023870]  ? handle_mm_fault+0x337/0x470
[  213.027592]  ? page_fault+0x8/0x30
[  213.031316]  ? lockdep_hardirqs_off+0xbe/0x100
[  213.034999]  ? mark_held_locks+0x24/0x90
[  213.038671]  ? do_syscall_64+0x1e/0xe0
[  213.042297]  do_syscall_64+0x74/0xe0
[  213.045828]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  213.049354] RIP: 0033:0x7fe7c527c7b8
[  213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f
0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54
[  213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8
[  213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003
[  213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0
[  213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080
[  213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000
[  213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common
[<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc
lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi
_ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe
r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas
[  213.112326] CR2: 0000000000000010
[  213.117429] ---[ end trace adb58eb0a4ee6283 ]---

Verify that q pointer is not NULL before setting the 'flags' field.

Fixes: 3f05e688 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2
switched in 3126.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

allocate_flower_entry does not check for allocation success, but tries
to deref the result. I only moved the spin_lock under null check, because
 the caller is checking allocation's status at line 652.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All constant in 'enum HCLGE_MBX_OPCODE' start with HCLGE, except
'HLCGE_MBX_PUSH_VLAN_INFO' (C and L switched)

s/HLC/HCL/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/netfilter/nf_tables_offload.h includes net/netfilter/nf_tables.h
which is itself on the blacklist.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/tipc_toprsv_listener_data_ready/tipc_topsrv_listener_data_ready/
(r and s switched in topsrv)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
We have a handful of fixes:
 * ignore bad CW parameters if we aren't using them,
   instead of warning
 * fix operation (and then build) with the new netlink vendor
   command policy requirement
 * fix a memory leak in an error path when setting beacons
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NTB updates from Jon Mason:
 "New feature to add support for NTB virtual MSI interrupts, the ability
  to test and use this feature in the NTB transport layer.

  Also, bug fixes for the AMD and Switchtec drivers, as well as some
  general patches"

* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Describe the ntb_msi_test client in the documentation.
  NTB: Add MSI interrupt support to ntb_transport
  NTB: Add ntb_msi_test support to ntb_test
  NTB: Introduce NTB MSI Test Client
  NTB: Introduce MSI library
  NTB: Rename ntb.c to support multiple source files in the module
  NTB: Introduce functions to calculate multi-port resource index
  NTB: Introduce helper functions to calculate logical port number
  PCI/switchtec: Add module parameter to request more interrupts
  PCI/MSI: Support allocating virtual MSI interrupts
  ntb_hw_switchtec: Fix setup MW with failure bug
  ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
  ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
  NTB: correct ntb_dev_ops and ntb_dev comment typos
  NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
  ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
  NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
  NTB: ntb_hw_amd: set peer limit register
  NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
  NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
  ...

flush_tlb_all_local() flushes the ITLB and DTLB of the CPU.
In case the machine does not have separate ITLBs and DTLBs, use the
alternative functionality to replace the code which flushes the ITLB
with nops while keeping the code which flushes the DTLB.
Signed-off-by: Helge Deller <deller@gmx.de>