- 11 Feb, 2020 40 commits
-
-
Florian Fainelli authored
[ Upstream commit df373702 ] b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6 ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harini Katakam authored
[ Upstream commit f822e9c4 ] GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting TSO with full 14bits of length field in payload descriptor. But an IP errata causes false amba_error (bit 6 of ISR) when length in payload descriptors is specified above 16387. The error occurs because the DMA falsely concludes that there is not enough space in SRAM for incoming payload. These errors were observed continuously under stress of large packets using iperf on a version where SRAM was 16K for each queue. This errata will be documented shortly and affects all versions since TSO functionality was added. Hence limit the max length to 0x3FC0 (rounded). Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Harini Katakam authored
[ Upstream commit 41c1ef97 ] The IP TSO implementation does NOT require the length to be a multiple of 8. That is only a requirement for UFO as per IP documentation. Hence, exit macb_features_check function in the beginning if the protocol is not UDP. Only when it is UDP, proceed further to the alignment checks. Update comments to reflect the same. Also remove dead code checking for protocol TCP when calculating header length. Fixes: 1629dd4f ("cadence: Add LSO support.") Signed-off-by:
-
Raed Salem authored
[ Upstream commit 08db2cf5 ] SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx, however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function nullifies sa_ctx pointer without freeing the memory allocated, hence the memory leak. Fix by free SA context when the SA is released. Fixes: d6c4f029 ("net/mlx5: Refactor accel IPSec code") Signed-off-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Raed Salem authored
[ Upstream commit 0dc2c534 ] The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used with negative negation as zero value indicates success but it used as failure return value instead. Fix by remove the unary not negation operator. Fixes: 05564d0a ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 263a425a ] After a number of suspend and resume cycles, it is possible for the RBUF to be stuck in Wake-on-LAN mode, despite the MPD enable bit being cleared which instructed the RBUF to exit that mode. Avoid creating that problematic condition by clearing the RX_EN and TX_EN bits in the UniMAC prior to disable the Magic Packet Detector logic which is guaranteed to make the RBUF exit Wake-on-LAN mode. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
-
Cong Wang authored
[ Upstream commit 52b5ae50 ] Jakub noticed there is a potential resource leak in tcindex_set_parms(): when tcindex_filter_result_init() fails and it jumps to 'errout1' which doesn't release the memory and resources allocated by tcindex_alloc_perfect_hash(). We should just jump to 'errout_alloc' which calls tcindex_free_perfect_hash(). Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by:
Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit c35947b8 ] Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to avoid possible races updating statistics Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM") Fixes: dc35a10f ("net: mvneta: bm: add support for hardware buffer management") Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit de34d708 ] The 7445 switch clocking profiles do not allow us to run the IMP port at 2Gb/sec in a way that it is reliable and consistent. Make sure that the setting is only applied to the 7278 family. Fixes: 8f1880cb ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 38f88c45 ] syzbot managed to send an IPX packet through bond_alb_xmit() and af_packet and triggered a use-after-free. First, bond_alb_xmit() was using ipx_hdr() helper to reach the IPX header, but ipx_hdr() was using the transport offset instead of the network offset. In the particular syzbot report transport offset was 0xFFFF This patch removes ipx_hdr() since it was only (mis)used from bonding. Then we need to make sure IPv4/IPv6/IPX headers are pulled in skb->head before dereferencing anything. BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108 (if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: [<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53 [<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282 [<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline] [<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline] [<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422 [<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469 [<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 [<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline] [<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224 [<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline] [<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline] [<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline] [<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627 [<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238 [<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278 [<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline] [<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252 [<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684 [<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996 [<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline] [<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Andreas Kemnade authored
commit 2f3dc25c upstream. There is a bit which gets cleared after conversion. Fixes: 9bb9e29c ("mfd: Add Ricoh RN5T618 PMIC core driver") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Marco Felsch authored
commit 1112ba02 upstream. The watchdog driver compatible is "dlg,da9062-watchdog" and not "dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and fwnode. As result the watchdog driver can't parse the devicetree. Fixes: 9b40b030 ("mfd: da9062: Supply core driver") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Acked-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Dan Carpenter authored
commit 5d3805af upstream. If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1 ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Sascha Hauer authored
commit ef5aafb6 upstream. set_seen() sets the bit corresponding to the PEB number in the bitmap, so when self_check_seen() wants to find PEBs that haven't been seen we have to print the PEBs that have their bit cleared, not the ones which have it set. Fixes: 5d71afb0 ("ubi: Use bitmaps in Fastmap self-check code") Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Trond Myklebust authored
commit 09a80f2a upstream. We must allow for the fact that iov_iter_write() could have returned a short write (e.g. if there was an ENOSPC issue). Fixes: d890be15 "nfsd: Add I/O trace points in the NFSv4 write path" Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 9594497f upstream. The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies, but then compared to a CLOCK_REALTIME timestamp later on, which makes no sense. For consistency with the other timestamps, change this to use a time_t. This is a change in behavior, which may cause regressions, but the current code is not sensible. On a system with CONFIG_HZ=1000, the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))' check is false for roughly the first 18 days of uptime and then true for the next 49 days. Fixes: 7919d0a2 ("nfsd: add a LRU list for blocked locks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
commit 2561c92b upstream. The nfsd4_cb_layout_done() function takes a 'time_t' value, multiplied by NSEC_PER_SEC*2 to get a nanosecond value. This works fine on 64-bit architectures, but on 32-bit, any value over 1 second results in a signed integer overflow with unexpected results. Cast one input to a 64-bit type in order to produce the same result that we have on 64-bit architectures, regarless of the type of nfsd4_lease. Fixes: 6b9b2107 ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods") Signed-off-by:
-
Yishai Hadas authored
commit d07de8bd upstream. The nr_pages argument of get_user_pages_remote() should always be in terms of the system page size, not the MR page size. Use PAGE_SIZE instead of umem_odp->page_shift. Fixes: 403cd12e ("IB/umem: Add contiguous ODP support") Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.orgSigned-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Prabhath Sajeepa authored
commit b5671afe upstream. Commit b0ffeb53 ("IB/mlx5: Fix iteration overrun in GSI qps") changed the way outstanding WRs are tracked for the GSI QP. But the fix did not cover the case when a call to ib_post_send() fails and updates index to track outstanding. Since the prior commmit outstanding_pi should not be bounded otherwise the loop generate_completions() will fail. Fixes: b0ffeb53 ("IB/mlx5: Fix iteration overrun in GSI qps") Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.comSigned-off-by:
Prabhath Sajeepa <psajeepa@purestorage.com> Acked-by:
-
Nathan Chancellor authored
commit fe06bf3d upstream. Clang warns: ../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch (mode) { ^ ../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous statement is here if (cr6set) ^ 1 warning generated. ../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] switch(mode) { ^ ../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous statement is here if (cr6set) ^ 1 warning generated. This warning occurs because there is a space before the tab on these lines. Remove them so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. While we are here, adjust the default block in dmfe_init_module to have a proper break between the label and assignment and add a space between the switch and opening parentheses to avoid a checkpatch warning. Fixes: e1c3e501 ("[PATCH] initialisation cleanup for ULI526x-net-driver") Link: https://github.com/ClangBuiltLinux/linux/issues/795Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
commit 5c61e223 upstream. Clang warns: ../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (!lp->ctl_rfduplx) ^ ../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement is here if (lp->ctl_rspeed != 100) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 0a0c72c9 ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796Signed-off-by:
-
Nathan Chancellor authored
commit 08cbc75f upstream. Clang warns: ../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] ap->rpkt = skb; ^ ../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here if (!skb) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Clean up this entire block's indentation so that it is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 6722e78c ("[PPP]: handle misaligned accesses") Link: https://github.com/ClangBuiltLinux/linux/issues/800Signed-off-by:
-
Nathan Chancellor authored
commit 50808326 upstream. Clang warns ../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, ^ ../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here if (target->nfcid1_len != 4 && target->nfcid1_len != 7 && ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: da052850 ("NFC: Add pn544 presence check for different targets") Link: https://github.com/ClangBuiltLinux/linux/issues/814Signed-off-by:
-
Nathan Chancellor authored
commit 251e3cb1 upstream. Clang warns: ../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:124:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] mdp4_crtc_set_config(encoder->crtc, ^ ../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:121:2: note: previous statement is here if (mdp4_dsi_encoder->enabled) ^ This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 776638e7 ("drm/msm/dsi: Add a mdp4 encoder for DSI") Link: https://github.com/ClangBuiltLinux/linux/issues/792Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Nathan Chancellor authored
commit c3aae14e upstream. Clang warns: ../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] val = SDRAM0_READ(DDR0_42); ^ ../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here else ^ This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns. Fixes: d23f5099 ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/780 Link: https://lore.kernel.org/r/20191209200338.12546-1-natechancellor@gmail.comSigned-off-by:
-
Nathan Chancellor authored
commit d9e98668 upstream. Clang warns: ../fs/ext2/super.c:1076:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) - ^ ../fs/ext2/super.c:1074:2: note: previous statement is here if (EXT2_BLOCKS_PER_GROUP(sb) == 0) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 41f04d85 ("[PATCH] ext2: fix mounts at 16T") Link: https://github.com/ClangBuiltLinux/linux/issues/827 Link: https://lore.kernel.org/r/20191218031930.31393-1-natechancellor@gmail.comSigned-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Nathan Chancellor authored
commit a89806c9 upstream. Clang warns: ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ^ ../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous statement is here if (readl_relaxed(addr) & mask) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1de990d8 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY") Link: https://github.com/ClangBuiltLinux/linux/issues/816Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Asutosh Das authored
commit 24366c2a upstream. bkops level should be rechecked upon receiving an exception. Currently the level is being cached and never updated. Update bkops each time the level is checked. Also do not use the cached bkops level value if it is disabled and then enabled. Fixes: afdfff59 (scsi: ufs: handle non spec compliant bkops behaviour by device) Link: https://lore.kernel.org/r/1574751214-8321-2-git-send-email-cang@qti.qualcomm.comReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Tested-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
commit aa867973 upstream. Clang warns: ../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (ha->fw_dump) ^ ../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is here if (ha->queues) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 068237c8 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure") Link: https://github.com/ClangBuiltLinux/linux/issues/819 Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.comAcked-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
-
Nathan Chancellor authored
commit a808a04c upstream. Clang warns: ../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] csio_lnodes_exit(hw, 1); ^ ../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is here if (*buf != '1') ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver") Link: https://github.com/ClangBuiltLinux/linux/issues/818 Link: https://lore.kernel.org/r/20191218014726.8455-1-natechancellor@gmail.comSigned-off-by:
-
Bart Van Assche authored
commit 3f5f7335 upstream. Since qla82xx_get_fw_size() returns a number in CPU-endian format, change its return type from __le32 into u32. This patch does not change any functionality. Fixes: 9c2b2975 ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.") Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.orgReviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Erdem Aktas authored
commit 264b0d2b upstream. CONFIG_VIRTUALIZATION may not be enabled for memory encrypted guests. If disabled, decrypted per-CPU variables may end up sharing the same page with variables that should be left encrypted. Always separate per-CPU variables that should be decrypted into their own page anytime memory encryption can be enabled in the guest rather than rely on any other config option that may not be enabled. Fixes: ac26963a ("percpu: Introduce DEFINE_PER_CPU_DECRYPTED") Cc: stable@vger.kernel.org # 4.15+ Signed-off-by:
Erdem Aktas <erdemaktas@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Lyude Paul authored
commit 58fe03d6 upstream. Disabling a display on MST can potentially happen after the entire MST topology has been removed, which means that we can't communicate with the topology at all in this scenario. Likewise, this also means that we can't properly update payloads on the topology and as such, it's a good idea to ignore payload update failures when disabling displays. Currently, amdgpu makes the mistake of halting the payload update process when any payload update failures occur, resulting in leaving DC's local copies of the payload tables out of date. This ends up causing problems with hotplugging MST topologies, and causes modesets on the second hotplug to fail like so: [drm] Failed to updateMST allocation table forpipe idx:1 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1511 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O) rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core rtsx_pci pinctrl_amd CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4 Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019 RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000 RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002 FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0 Call Trace: ? mutex_lock+0xe/0x30 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] ? dm_read_reg_func+0x39/0xb0 [amdgpu] ? core_link_enable_stream+0x656/0x730 [amdgpu] core_link_enable_stream+0x656/0x730 [amdgpu] dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] dc_commit_state+0x292/0x770 [amdgpu] ? add_timer+0x101/0x1f0 ? ttm_bo_put+0x1a1/0x2f0 [ttm] amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] ? ttm_bo_validate+0x134/0x150 [ttm] ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] ? _cond_resched+0x15/0x30 ? wait_for_completion_timeout+0x38/0x160 ? _cond_resched+0x15/0x30 ? wait_for_completion_interruptible+0x33/0x190 commit_tail+0x94/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] drm_mode_setcrtc+0x194/0x6a0 [drm] ? _cond_resched+0x15/0x30 ? mutex_lock+0xe/0x30 ? drm_mode_getcrtc+0x180/0x180 [drm] drm_ioctl_kernel+0xaa/0xf0 [drm] drm_ioctl+0x208/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x458/0x6d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fab2121f87b Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10 R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280 ---[ end trace 6ea888c24d2059cd ]--- Note as well, I have only been able to reproduce this on setups with 2 MST displays. Changes since v1: * Don't return false when part 1 or part 2 of updating the payloads fails, we don't want to abort at any step of the process even if things fail Reviewed-by:
Mikita Lipski <Mikita.Lipski@amd.com> Signed-off-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Stephen Warren authored
commit bf83b96f upstream. For a little over a year, U-Boot on Tegra124 has configured the flow controller to perform automatic RAM re-repair on off->on power transitions of the CPU rail[1]. This is mandatory for correct operation of Tegra124. However, RAM re-repair relies on certain clocks, which the kernel must enable and leave running. The fuse clock is one of those clocks. Mark this clock as critical so that LP1 power mode (system suspend) operates correctly. [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair Reported-by:
Jonathan Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Christian Borntraeger authored
commit 55680890 upstream. The initial CPU reset clobbers the userspace fpc and the store status ioctl clobbers the guest acrs + fpr. As these calls are only done via ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and must) act directly on the sync regs, not on the thread context. Cc: stable@kernel.org Fixes: e1788bb9 ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load") Fixes: 31d8b8d4 ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20200131100205.74720-2-frankja@linux.ibm.comSigned-off-by:
-
Sean Christopherson authored
commit 16be9dde upstream. Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor. Do the freeing by calling kvm_arch_vcpu_free() instead of open coding the freeing. This adds a likely superfluous, but ultimately harmless, call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled. Using kvm_arch_vcpu_free() allows for additional cleanup in the future. Fixes: f5f48ee1 ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit b11306b5 upstream. Calculate the host-reserved cr4 bits at runtime based on the system's capabilities (using logic similar to __do_cpuid_func()), and use the dynamically generated mask for the reserved bit check in kvm_set_cr4() instead using of the static CR4_RESERVED_BITS define. This prevents userspace from "enabling" features in cr4 that are not supported by the system, e.g. by ignoring KVM_GET_SUPPORTED_CPUID and specifying a bogus CPUID for the vCPU. Allowing userspace to set unsupported bits in cr4 can lead to a variety of undesirable behavior, e.g. failed VM-Enter, and in general increases KVM's attack surface. A crafty userspace can even abuse CR4.LA57 to induce an unchecked #GP on a WRMSR. On a platform without LA57 support: KVM_SET_CPUID2 // CPUID_7_0_ECX.LA57 = 1 KVM_SET_SREGS // CR4.LA57 = 1 KVM_SET_MSRS // KERNEL_GS_BASE = 0x0004000000000000 KVM_RUN leads to a #GP when writing KERNEL_GS_BASE into hardware: unchecked MSR access error: WRMSR to 0xc0000102 (tried to write 0x0004000000000000) at rIP: 0xffffffffa00f239a (vmx_prepare_switch_to_guest+0x10a/0x1d0 [kvm_intel]) Call Trace: kvm_arch_vcpu_ioctl_run+0x671/0x1c70 [kvm] kvm_vcpu_ioctl+0x36b/0x5d0 [kvm] do_vfs_ioctl+0xa1/0x620 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x170 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc08133bf47 Note, the above sequence fails VM-Enter due to invalid guest state. Userspace can allow VM-Enter to succeed (after the WRMSR #GP) by adding a KVM_SET_SREGS w/ CR4.LA57=0 after KVM_SET_MSRS, in which case KVM will technically leak the host's KERNEL_GS_BASE into the guest. But, as KERNEL_GS_BASE is a userspace-defined value/address, the leak is largely benign as a malicious userspace would simply be exposing its own data to the guest, and attacking a benevolent userspace would require multiple bugs in the userspace VMM. Cc: stable@vger.kernel.org Cc: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 8c6de56a upstream. kvm_steal_time_set_preempted() may accidentally clear KVM_VCPU_FLUSH_TLB bit if it is called more than once while VCPU is preempted. This is part of CVE-2019-3016. (This bug was also independently discovered by Jim Mattson <jmattson@google.com>) Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Joao Martins <joao.m.martins@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
commit cb10bf91 upstream. Explicitly free the shared page if kvmppc_mmu_init() fails during kvmppc_core_vcpu_create(), as the page is freed only in kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit(). Fixes: 96bc451a ("KVM: PPC: Introduce shared page") Cc: stable@vger.kernel.org Reviewed-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Sean Christopherson authored
commit 1a978d9d upstream. Call kvm_vcpu_uninit() if vcore creation fails to avoid leaking any resources allocated by kvm_vcpu_init(), i.e. the vcpu->run page. Fixes: 371fefd6 ("KVM: PPC: Allow book3s_hv guests to use SMT processor modes") Cc: stable@vger.kernel.org Reviewed-by:
-
