- 06 Jul, 2015 23 commits
-
-
Paulo Zanoni authored
Make sure we're not going to have weird races in really weird cases where a lot of different CRTCs are doing rendering and modesets at the same time. With this change and the stolen_lock from the previous patch, we can start removing the struct_mutex locking we have around FBC in the next patches. v2: - Rebase (6 months later) - Also lock debugfs and stolen. v3: - Don't lock a single value read (Chris). - Replace lockdep assertions with WARNs (Daniel). - Improve commit message. - Don't forget intel_pre_plane_update() locking. v4: - Don't remove struct_mutex at intel_pre_plane_update() (Chris). - Add comment regarding locking dependencies (Chris). - Rebase after the stolen code rework. - Rebase again after drm-intel-nightly changes. v5: - Rebase after the new stolen_lock patch. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Which should protect dev_priv->mm.stolen usage. This will allow us to simplify the relationship between stolen memory, FBC and struct_mutex. v2: - Rebase after the stolen_remove_node() dev_priv patch move. - I realized that after we fixed a few things related to the FBC CFB size checks, we're not reallocating the CFB anymore with FBC enabled, so we can just move all the locking to i915_gem_stolen.c and stop worrying about freezing all the stolen alocations while freeing/rellocating the CFB. This allows us to fix the "Too coarse" observation from Chris. Suggested-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Paulo Zanoni authored
With the abstractions created by the last patch, we can move this code and the only thing inside intel_fbc.c that knows about dev_priv->mm is the code that reads stolen_base. We also had to move a call to i915_gem_stolen_cleanup_compression() - now called intel_fbc_cleanup_cfb() - outside i915_gem_stolen.c. v2: - Rebase after the remove_node() changes on the previous patch. Requested-by:
-
Paulo Zanoni authored
We want to move the FBC code out of i915_gem_stolen.c, but that code directly adds/removes stolen memory nodes. Let's create this abstraction, so i915_gme_stolen.c is still in control of all the stolen memory handling. The abstraction will also allow us to add locking assertions later. v2: - Add dev_priv as remove_node() argument since we'll need it later (Chris). Requested-by: -
Ville Syrjälä authored
Kill the extra intel_pre_plane_update() I accidentally added in commit 852eb00d Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jun 24 22:00:07 2015 +0300 drm/i915: Try to make sure cxsr is disabled around plane enable/disable This fixes a load of warnings from the frontbuffer tracking. Testcase: igt/kms_frontbuffer_tracking/fbc-1p-rte Tested-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Adding support for did2, or the extended support display devices ID list, increases the total to 15. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Jani Nikula authored
Make it easier to handle the extended didl. No functional changes. Signed-off-by:
-
Jani Nikula authored
Conform to same style as the rest of the driver. Signed-off-by:
-
Jani Nikula authored
Inluding extended didl and cpdl fields Present since opregion version 3.0. Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
Jani Nikula authored
Add an overview of the drm/i915 hotplug handling. Signed-off-by:
-
Jani Nikula authored
Clarify that audio enable/disable sequences are part of the modeset sequence. Signed-off-by:
-
Paulo Zanoni authored
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_prepare_ddi’: drivers/gpu/drm/i915/intel_ddi.c:517:6: warning: ‘ddi_translations_fdi’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (ddi_translations_fdi) ^ drivers/gpu/drm/i915/intel_ddi.c:446:30: note: ‘ddi_translations_fdi’ was declared here const struct ddi_buf_trans *ddi_translations_fdi; ^ This line used to be there, but was removed by: commit f8896f5d Author: David Weinehall <david.weinehall@linux.intel.com> Date: Thu Jun 25 11:11:03 2015 +030 drm/i915/skl: Buffer translation improvements Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: -
Abdiel Janulgue authored
Ensures that the batch buffer is executed by the resource streamer. And will let userspace know whether Resource Streamer is supported in the kernel. v2: Don't skip 1<<15 for the exec flags (Jani Nikula) v3: Use HAS_RESOURCE_STREAMER macro for execbuf validation (Chris Wilson) (from getparam patch) v2: Update I915_PARAM_HAS_RESOURCE_STREAMER so it's after I915_PARAM_HAS_GPU_RESET. v3: Only advertise RS support for hardware that supports it. v4: Add HAS_RESOURCE_STREAMER() macro (Chris) Testcase: igt/gem_exec_params Cc: Jani Nikula <jani.nikula@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:Abdiel Janulgue <abdiel.janulgue@linux.intel.com> [danvet: squash in getparam patch since it'd break bisect, suggested by Chris.] Signed-off-by:
-
Abdiel Janulgue authored
GEN8 and above uses Execlists by default instead of the legacy ringbuffer for batch execution. This patch enables the resource streamer bits when required. Patch is based on the initial work by Minu Mathai <minu.mathai@intel.com> This version also adds the required bits to enable GEN8 Resource Streamer context save and restore for Execlists. Cc: ville.syrjala@linux.intel.com Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
-
Abdiel Janulgue authored
Also clarify comments on context size that the extra state for Resource Streamer is included. v2: Don't remove the extended save/restore enabled for older platforms. (Ville) Use new MI_SET_CONTEXT defines for HSW RS save/restore state instead of extended save/restore. (Daniel) Suggested-by: -
Abdiel Janulgue authored
Adds support for enabling the resource streamer on the legacy ringbuffer for HSW and GEN8. Reviewed-by:
-
Vandana Kannan authored
This patch contains changes based on 2 updates to the spec: Port PLL VCO restriction raised up to 6700. Port PLL now needs DCO amp override enable for all VCO frequencies. v2: Sonika's review comment addressed - dcoampovr_en_h variable not required Based on a discussion with Siva, the following changes have been made. - replace dco_amp var with #define BXT_DCO_AMPLITUDE - set pll10 in a single assignment v3: Move DCO amplitude default value to i915_reg.h. Suggested by Siva. Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Reviewed-by: Sonika Jindal <sonika.jindal@intel.com> [v2] [danvet: Spell out BUN since not everyone knows what this means.] Signed-off-by:
-
Ville Syrjälä authored
HDMI 12bpc should be working fine now. Let it loose. This reverts commit 5e3daaca. v2: Rebased due to CHV/BXT port clock check improvemnts Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
CHV/BXT DPLL can't generate frequencies in the 216-240 MHz range. Account for that when checking whether the HDMI port clock is valid. This is particularly important for BXT since it can otherwise do 12bpc, and standard 1920x1080p60 CEA modes land right in the middle of that range when the clock gets multiplied to account for 12bpc. With the extra checks we will now filter out any mode where both 8bpc and 12bpc clock are within the gap. During modeset we then pick whichever mode works, favoring 12bpc if both are possible. 12bpc isn't supported on CHV so we simply end up filtering out any mode where the 8bpc port clock is in the gap. v2: Fix crtc_clock vs. port_clock fumble in compute_config() (Imre) Signed-off-by:
-
Ville Syrjälä authored
Increase the HDMI port minimum port clock from 20 to 25 MHz. This is is the minimum listed in the DVI/HDMI specs, and it's also the documented minimum DPLL frequency for most of our platforms. Signed-off-by:
-
Ville Syrjälä authored
Take the HDMI 12bpc mode and pixel repeat into account when extracting the dotclock from the hardware on DDI platforms. Tested on HSW only. Signed-off-by:
-
Markus Elfring authored
The drm_property_unreference_blob() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Zhao Junwang <zhjwpku@gmail.com> Signed-off-by:
-
- 03 Jul, 2015 11 commits
-
-
Daniel Vetter authored
Signed-off-by: -
Mika Kuoppala authored
Previously we have pointed the page where the individual ppgtt scratch structures refer to, to be the instance which GGTT setup have allocated. So it has been shared. To achieve full isolation between ppgtts also in this regard, allocate per ppgtt scratch page. Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Gaurav K Singh authored
On CHT, changes are required for calculating the correct m,n & p with minimal error +/- for the required DSI clock, so that the correct dividor & ctrl values are written in cck regs for DSI. This patch has been tested on CHT RVP with 1200 x 1920 panel. v2 by Jani, rebased on earlier refactoring, original at [1]. [1] http://mid.gmane.org/1431368400-1942-5-git-send-email-rodrigo.vivi@intel.comSigned-off-by:
Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Gaurav K Singh authored
For MIPI panels requiring higher DSI clk, values needs to be added in lfsr_converts table for getting the correct values of pll ctrl and dividor values which gets programmed in cck regs, otherwise DSI PLL does not get locked leading to no display on the MIPI panel. Signed-off-by:
-
Jani Nikula authored
Nuke three copies of the same switch case. Hopefully we can switch to a drm generic function later on, but that will require us to swich to enum mipi_dsi_pixel_format first. Reviewed-by:
-
Paulo Zanoni authored
We first set the threshold value when we're allocating the CFB, and then later at {ilk,gen7}_fbc_enable() we increment it in case we're using 16bpp. While that is correct, it is dangerous: if we rework the code a little bit in a way that allows us to call intel_fbc_enable() without necessarily calling i915_gem_stolen_setup_compression() first, we might end up incrementing threshold more than once. To prevent that, increment a temporary variable instead. v2: Rebase. Signed-off-by: -
Tvrtko Ursulin authored
Currently only normal views were accounted which under-accounts the usage as reported in debugfs. Introduce new helper, i915_gem_obj_total_ggtt_size, and use it from call sites which want to know how much GGTT space are objects using. v2: Single loop in i915_gem_get_aperture_ioctl. (Chris Wilson) v3: Walk GGTT active/inactive lists in i915_gem_get_aperture_ioctl for better efficiency. (Chris Wilson, Daniel Vetter) v4: Make i915_gem_obj_total_ggtt_size private to debugfs. (Chris Wilson) v5: Change unsigned long to u64. (Chris Wilson) Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Every other alloc_* function return the pointer to the page they alloc. Follow the convention with scratch page also. Signed-off-by:
-
Mika Kuoppala authored
Maintain base page handling functions in order of alloc, free, init. No functional changes. v2: s/Introduce/Maintain (Michel) v3: Rebase Cc: Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
John Harrison authored
An earlier patch was added to reserve space in the ring buffer for the commands issued during 'add_request()'. The initial version was pessimistic in the way it handled buffer wrapping and would cause premature wraps and thus waste ring space. This patch updates the code to better handle the wrap case. It no longer enforces that the space being asked for and the reserved space are a single contiguous block. Instead, it allows the reserve to be on the far end of a wrap operation. It still guarantees that the space is available so when the wrap occurs, no wait will happen. Thus the wrap cannot fail which is the whole point of the exercise. Also fixed a merge failure with some comments from the original patch. v2: Incorporated suggestion by David Gordon to move the wrap code inside the prepare function and thus allow a single combined wait_for_space() call rather than doing one before the wrap and another after. This also makes the prepare code much simpler and easier to follow. v3: Fix for 'effective_size' vs 'size' during ring buffer remainder calculations (spotted by Tomas Elf). For: VIZ-5115 CC: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Tomas Elf <tomas.elf@intel.com> Signed-off-by:
-
Imre Deak authored
For the purpose of state checking we only care about the DPLL HW flags that we actually program, so mask off the ones that we don't. This fixes one set of DPLL state check failures. Signed-off-by:
-
- 30 Jun, 2015 6 commits
-
-
Imre Deak authored
Add support for reading out the HW state for DDI ports. Since the actual programming is very similar to the CHV/VLV DPIO PLL programming we can reuse much of the logic from there. This fixes the state checker failures I saw on my BXT with HDMI output. v2: - rebased on v2 of patch 4/5 Signed-off-by:
-
Imre Deak authored
Depending on the platform the port clock fed to the pipe can be the PLL's post-divided fast clock rate or a /5 divided version of it. To make this more obvious across the platforms calculate this port clock along with the rest of the PLL parameters. This is also needed by the next patch where we can reuse the CHV helper for the BXT PLL HW readout code; so export the corresponding helper. While at it also add a more descriptive name to the helpers and a comment explaining what's being calculated. No functional change. Suggested-by:
-
Imre Deak authored
Move the helper next to the PLL helpers of the other platforms for clarity. No functional change. Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Signed-off-by:
-
Imre Deak authored
Signed-off-by:
-
Imre Deak authored
Although we have a fixed setting for the PLL9 and EBB4 registers, it still makes sense to check them together with the rest of PLL registers. While at it also remove a redundant comment about 10 bit clock enabling. Signed-off-by:
-
David Weinehall authored
This patch adds support for 0.85V VccIO on Skylake Y, separate buffer translation tables for Skylake U, and support for I_boost for the entries that needs this. Changes in v2: * Refactored the code a bit to move all DDI signal level setup to intel_ddi.c Issue: VIZ-5677 Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Reviewed-by:
Antti Koskipää <antti.koskipaa@linux.intel.com> [danvet: Apply style polish checkpatch suggested.] Signed-off-by:
-
