- 23 Mar, 2023 29 commits
-
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230319092428.283054-8-u.kleine-koenig@pengutronix.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230319092428.283054-6-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Peng Fan authored
The property is NXP downstream property that there is no user in upstream, drop it. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230323035531.3808192-2-peng.fan@oss.nxp.comSigned-off-by:
-
Peng Fan authored
The previous i.MX8MQ support breaks rockchip,dwc3 support, so use select to restrict i.MX8MQ support and avoid break others. Fixes: 3754c41c ("dt-bindings: usb: snps,dwc3: support i.MX8MQ") Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230323035531.3808192-1-peng.fan@oss.nxp.comSigned-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/usb/serial/quatech2.c:179:19: error: unused function 'qt2_setdevice' [-Werror,-Wunused-function] static inline int qt2_setdevice(struct usb_device *dev, u8 *data) ^ This function is not used, so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230321181255.1825963-1-trix@redhat.comSigned-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/usb/typec/tipd/core.c:180:19: error: unused function 'tps6598x_write16' [-Werror,-Wunused-function] static inline int tps6598x_write16(struct tps6598x *tps, u8 reg, u16 val) ^ drivers/usb/typec/tipd/core.c:185:19: error: unused function 'tps6598x_write32' [-Werror,-Wunused-function] static inline int tps6598x_write32(struct tps6598x *tps, u8 reg, u32 val) ^ These static functions are not used, so remove them. Signed-off-by:Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20230319133732.1702841-1-trix@redhat.comSigned-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/usb/typec/tcpm/tcpci_mt6360.c:46:19: error: unused function 'mt6360_tcpc_read16' [-Werror,-Wunused-function] static inline int mt6360_tcpc_read16(struct regmap *regmap, ^ This function is not used, so remove it. Signed-off-by: -
Tom Rix authored
clang with W=1 reports drivers/usb/gadget/udc/renesas_usbf.c:548:20: error: unused function 'usbf_ep_dma_reg_clrset' [-Werror,-Wunused-function] static inline void usbf_ep_dma_reg_clrset(struct usbf_ep *ep, uint offset, ^ This function is not used, so remove it. Signed-off-by:Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20230319155910.1706294-1-trix@redhat.comSigned-off-by:
-
Yu Zhe authored
Pointer variables of void * type do not require type cast. Signed-off-by:
Yu Zhe <yuzhe@nfschina.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230316082338.18388-1-yuzhe@nfschina.comSigned-off-by:
-
Xu Yang authored
Two 'role' file exist in different position but with totally same function. 1. /sys/devices/platform/soc@0/xxxxxxxx.usb/ci_hdrc.0/role 2. /sys/kernel/debug/usb/ci_hdrc.0/role This will remove the 2rd redundant 'role' debug file (under debugfs) and keep the one which is more closer to user. Acked-by:
Peter Chen <peter.chen@kernel.org> Signed-off-by:
Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061651.2457567-1-xu.yang_2@nxp.comSigned-off-by:
-
Josue David Hernandez Gutierrez authored
Move function to sync MSI from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy [commit message rewording -Mathias] Signed-off-by:
Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-15-mathias.nyman@linux.intel.comSigned-off-by:
-
Josue David Hernandez Gutierrez authored
Call function to sync MSI interrupts from pci specific xhci_pci_suspend() function in xhci-pci.c instead of from generic xhci_suspend() [commit message rewording -Mathias] Signed-off-by:
-
Josue David Hernandez Gutierrez authored
Move function to cleanup MSI from xhci.c to xhci-pci.c This is to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy Signed-off-by:
-
Josue David Hernandez Gutierrez authored
Call the PCI specific MSI/MSIX interrupt freeing code from the xhci-pci callbacks instead of generic xhci code, decoupling PCI parts from generic xhci functions. Adds xhci_pci_stop() that overrides xhci_stop() for PCI xHC controllers. This will free MSIX interrupts a bit later in the hc_driver stop callback, but is still earlier than usb core frees "legacy" interrupts, or interrupts for other hosts. Signed-off-by:
-
Josue David Hernandez Gutierrez authored
Move functions to setup msi from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, functions are an exact copy [commit message rewording -Mathias] Signed-off-by:
-
Josue David Hernandez Gutierrez authored
xhci MSI setup is currently done at the same time as xHC host is started in xhci_run(). This couples the generic xhci code with PCI, and will reconfigure MSI/MSIX interrupts every time xHC is started. Decouple MSI/MSIX configuration from generic xhci code by moving MSI/MSIX part to a PCI specific xhci_pci_run() function overriding xhci_run(). This allows us to remove unnecessay MSI/MSIX reconfiguration done every time PCI xhci resumes from suspend. i.e. remove the xhci_cleanup_msix() call from xhci_resume() and the xhci_try_enale_msi() call in xhci_run() called a bit later by xhci_resume() [minor changes and commit message rewrite -Mathias] Signed-off-by:
-
Mathias Nyman authored
When DbC is enabled the first port on the xHC host acts as a usb device. xHC provides the descriptors automatically when the DbC device is enumerated. Most of the values are hardcoded, but some fields such as idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified. Add sysfs entries that allow userspace to change these. User can only change them before dbc is enabled, i.e. before writing "enable" to dbc sysfs file as we don't want these values to change while device is connected, or during enumeration. Add documentation for these entries in Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd Signed-off-by:
-
Andy Shevchenko authored
For easy grepping on debug purposes join string literals back in the messages. No functional change. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
There is no need to have explicit castings when we have specific pointer extensions. Replace the explicit castings with appropriate specifiers. Signed-off-by:
-
Andy Shevchenko authored
Use more natural while (i--) patter to clean up allocated resources. Signed-off-by:
-
Andy Shevchenko authored
When function returns void and we have if-else-if chain, there is no need to explicitly call return. Drop them and indent lines better. While at it, make if-chain sorted from testing bigger values to smaller. Signed-off-by:
-
Andy Shevchenko authored
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. While at it, make if-chain sorted from testing bigger values to smaller. Signed-off-by:
-
Andy Shevchenko authored
Use dma_poll_zalloc() instead of explicit memset() call in xhci_alloc_stream_ctx(). Note, that dma_alloc_coherent() is always issues zeroed memory chunk. Signed-off-by:
-
Andy Shevchenko authored
Carefully calculate size for memory allocations, i.e. with help of size_mul() macro from overflow.h. Signed-off-by:
-
- 21 Mar, 2023 5 commits
-
-
Uwe Kleine-König authored
This driver didn't see real maintainance since several years. It has several trivial issues (check $(scripts/checkpatch.pl -f drivers/usb/misc/ftdi-elan.c)) and some harder ones (difficult locking, explict kref handling, ...). Also today it's hard to find hardware to make actually use of such a card and I suspect the driver is completely unused. So remove it. Signed-off-by:
-
Uwe Kleine-König authored
This driver got its last actual change in 2006 and is probably unused as nowbody should use a cardbus to USB adapter any more. If it were still used, the driver was in urgent need for maintainer love. (Explicit kref handling, underdocumented locking, .remove() can return errors ...) Also the link in the (now removed) help text doesn't look actively maintained. According to archive.org it forwarded to http://www.copenhagen-hotel.net/ already back in 2018. So don't waste more time on this driver and just delete it. Signed-off-by:
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230320233904.2920197-1-robh@kernel.orgSigned-off-by:
-
Uwe Kleine-König authored
A platform device's .remove() callback is only ever called after .probe() successfully completed. After such a successful call, platform_get_drvdata() doesn't return NULL. Simplify accordingly. Signed-off-by:
-
Uwe Kleine-König authored
- Don't break strings over two (or more) lines - Put the , separating function args at the end of line - Replace if (cond) {} else { ... } by if (!cond) { ... } - Consistently use curly braces in all blocks belonging to the same if if at least one block needs them. - Don't start a new line just for ); There are no semantic changes. Signed-off-by:
-
- 16 Mar, 2023 6 commits
-
-
Konrad Dybcio authored
Document the QCM2290 DWC3 controller. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by:
-
Emanuele Ghidoli authored
Add support for USB3803 and bypass mode, with this change is also possible to move the component out of bypass mode. In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Controlling mode of operations: | RESET_N | BYPASS_N | Mode | -------------------------------- | 0 | 0 | standby | | 1 | 0 | bypass | | 1 | 1 | hub | Datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/00001691D.pdfSigned-off-by:
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230313165039.255579-4-francesco@dolcini.itSigned-off-by:
-
Emanuele Ghidoli authored
Refactor code to simplify adding support for USB3803 and bypass mode. Remove static usb3503_reset() and move it to usb3503_switch_mode(), with the addition of the bypass mode we need to drive the various control signals to the expected configuration, not just to assert/release the reset. In addition to that the usb3503_connect() needs to be called only for HUB mode. No functional changes expected nor intended because of this change. Signed-off-by:
-
Emanuele Ghidoli authored
Add support for usb3803, compared to usb3503 it uses a regular USB connection to upstream instead of HSIC, it has an additional low power mode (bypass) and an additional control signal (BYPASS_N). In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Signed-off-by:
-
Andy Shevchenko authored
It looks like the driver copied'n'pasted almost random set of headers for its code. Rectify it a bit by removing of_gpio.h that is not only unused, but also will be removed in the future completely. Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/usb/typec/tcpm/fusb302.c:1816:34: error: ‘fusb302_dt_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
