Skip to content

L
linux
Switch branch/tag
  1. 20 Dec, 2021 11 commits
  3. 19 Dec, 2021 14 commits
  5. 18 Dec, 2021 9 commits
  7. 17 Dec, 2021 6 commits
    • Brett Creeley's avatar
      iavf: Restrict maximum VLAN filters for VIRTCHNL_VF_OFFLOAD_VLAN_V2 · 92fc5085
      Brett Creeley authored 
      For VIRTCHNL_VF_OFFLOAD_VLAN, PF's would limit the number of VLAN
filters a VF was allowed to add. However, by the time the opcode failed,
the VLAN netdev had already been added. VIRTCHNL_VF_OFFLOAD_VLAN_V2
added the ability for a PF to tell the VF how many VLAN filters it's
allowed to add. Make changes to support that functionality.
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      92fc5085
    • Brett Creeley's avatar
      iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 offload enable/disable · 8afadd1c
      Brett Creeley authored 
      The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the VF to support 802.1Q and 802.1ad VLAN insertion and stripping if
successfully negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
Multiple changes were needed to support this new functionality.

1. Added new aq_required flags to support any kind of VLAN stripping and
   insertion offload requests via virtchnl.

2. Added the new method iavf_set_vlan_offload_features() that's
   used during VF initialization, VF reset, and iavf_set_features() to
   set the aq_required bits based on the current VLAN offload
   configuration of the VF's netdev.

3. Added virtchnl handling for VIRTCHNL_OP_ENABLE_STRIPPING_V2,
   VIRTCHNL_OP_DISABLE_STRIPPING_V2, VIRTCHNL_OP_ENABLE_INSERTION_V2,
   and VIRTCHNL_OP_ENABLE_INSERTION_V2.
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      8afadd1c
    • Brett Creeley's avatar
      iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 hotpath · ccd219d2
      Brett Creeley authored 
      The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the Tx and Rx VLAN tag for insertion and
stripping offloads. In order to support this functionality a few changes
are needed.

1. Add a new method to cache the VLAN tag location based on negotiated
   capabilities for the Tx and Rx ring flags. This needs to be called in
   the initialization and reset paths.

2. Refactor the transmit hotpath to account for the new Tx ring flags.
   When IAVF_TXR_FLAGS_VLAN_LOC_L2TAG2 is set, then the driver needs to
   insert the VLAN tag in the L2TAG2 field of the transmit descriptor.
   When the IAVF_TXRX_FLAGS_VLAN_LOC_L2TAG1 is set, then the driver needs
   to use the l2tag1 field of the data descriptor (same behavior as
   before).

3. Refactor the iavf_tx_prepare_vlan_flags() function to simplify
   transmit hardware VLAN offload functionality by only depending on the
   skb_vlan_tag_present() function. This can be done because the OS
   won't request transmit offload for a VLAN unless the driver told the
   OS it's supported and enabled.

4. Refactor the receive hotpath to account for the new Rx ring flags and
   VLAN ethertypes. This requires checking the Rx ring flags and
   descriptor status bits to determine the location of the VLAN tag.
   Also, since only a single ethertype can be supported at a time, check
   the enabled netdev features before specifying a VLAN ethertype in
   __vlan_hwaccel_put_tag().
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      ccd219d2
    • Brett Creeley's avatar
      iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config · 48ccc43e
      Brett Creeley authored 
      Based on VIRTCHNL_VF_OFFLOAD_VLAN_V2, the VF can now support more VLAN
capabilities (i.e. 802.1AD offloads and filtering). In order to
communicate these capabilities to the netdev layer, the VF needs to
parse its VLAN capabilities based on whether it was able to negotiation
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or neither of
these.

In order to support this, add the following functionality:

iavf_get_netdev_vlan_hw_features() - This is used to determine the VLAN
features that the underlying hardware supports and that can be toggled
off/on based on the negotiated capabiltiies. For example, if
VIRTCHNL_VF_OFFLOAD_VLAN_V2 was negotiated, then any capability marked
with VIRTCHNL_VLAN_TOGGLE can be toggled on/off by the VF. If
VIRTCHNL_VF_OFFLOAD_VLAN was negotiated, then only VLAN insertion and/or
stripping can be toggled on/off.

iavf_get_netdev_vlan_features() - This is used to determine the VLAN
features that the underlying hardware supports and that should be
enabled by default. For example, if VIRTHCNL_VF_OFFLOAD_VLAN_V2 was
negotiated, then any supported capability that has its ethertype_init
filed set should be enabled by default. If VIRTCHNL_VF_OFFLOAD_VLAN was
negotiated, then filtering, stripping, and insertion should be enabled
by default.

Also, refactor iavf_fix_features() to take into account the new
capabilities. To do this, query all the supported features (enabled by
default and toggleable) and make sure the requested change is supported.
If VIRTCHNL_VF_OFFLOAD_VLAN_V2 is successfully negotiated, there is no
need to check VIRTCHNL_VLAN_TOGGLE here because the driver already told
the netdev layer which features can be toggled via netdev->hw_features
during iavf_process_config(), so only those features will be requested
to change.
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      48ccc43e
    • Brett Creeley's avatar
      iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation · 209f2f9c
      Brett Creeley authored 
      In order to support the new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability the
VF driver needs to rework it's initialization state machine and reset
flow. This has to be done because successful negotiation of
VIRTCHNL_VF_OFFLOAD_VLAN_V2 requires the VF driver to perform a second
capability request via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS before
configuring the adapter and its netdev.

Add the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit when sending the
VIRTHCNL_OP_GET_VF_RESOURECES message. The underlying PF will either
support VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or
neither. Both of these offloads should never be supported together.

Based on this, add 2 new states to the initialization state machine:

__IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS
__IAVF_INIT_CONFIG_ADAPTER

The __IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS state is used to request/store
the new VLAN capabilities if and only if VIRTCHNL_VLAN_OFFLOAD_VLAN_V2
was successfully negotiated in the __IAVF_INIT_GET_RESOURCES state.

The __IAVF_INIT_CONFIG_ADAPTER state is used to configure the
adapter/netdev after the resource requests have finished. The VF will
move into this state regardless of whether it successfully negotiated
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2.

Also, add a the new flag IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS and set
it during VF reset. If VIRTCHNL_VF_OFFLOAD_VLAN_V2 was successfully
negotiated then the VF will request its VLAN capabilities via
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS during the reset. This is needed
because the PF may change/modify the VF's configuration during VF reset
(i.e. modifying the VF's port VLAN configuration).

This also, required the VF to call netdev_update_features() since its
VLAN features may change during VF reset. Make sure to call this under
rtnl_lock().
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      209f2f9c
    • Brett Creeley's avatar
      virtchnl: Add support for new VLAN capabilities · bd0b536d
      Brett Creeley authored 
      Currently VIRTCHNL only allows for VLAN filtering and offloads to happen
on a single 802.1Q VLAN. Add support to filter and offload on inner,
outer, and/or inner + outer VLANs.

This is done by introducing the new capability
VIRTCHNL_VF_OFFLOAD_VLAN_V2. The flow to negotiate this new capability
is shown below.

1. VF - sets the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit in the
   virtchnl_vf_resource.vf_caps_flags during the
   VIRTCHNL_OP_GET_VF_RESOURCES request message. The VF should also set
   the VIRTCHNL_VF_OFFLOAD_VLAN bit in case the PF driver doesn't support
   the new capability.

2. PF - sets the VLAN capability bit it supports in the
   VIRTCHNL_OP_GET_VF_RESOURCES response message. This will either be
   VIRTCHNL_VF_OFFLOAD_VLAN_V2, VIRTCHNL_VF_OFFLOAD_VLAN, or none.

3. VF - If the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability was ACK'd by the
   PF, then the VF needs to request the VLAN capabilities of the
   PF/Device by issuing a VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS request.
   If the VIRTCHNL_VF_OFFLOAD_VLAN capability was ACK'd then the VF
   knows only single 802.1Q VLAN filtering/offloads are supported. If no
   VLAN capability is ACK'd then the PF/Device doesn't support hardware
   VLAN filtering/offloads for this VF.

4. PF - Populates the virtchnl_vlan_caps structure based on what it
   allows/supports for that VF and sends that response via
   VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.

After VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is successfully negotiated
the VF driver needs to interpret the capabilities supported by the
underlying PF/Device. The VF will be allowed to filter/offload the
inner 802.1Q, outer (various ethertype), inner 802.1Q + outer
(various ethertypes), or none based on which fields are set.

The VF will also need to interpret where the VLAN tag should be inserted
and/or stripped based on the negotiated capabilities.
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      bd0b536d
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7