- 22 Aug, 2017 24 commits
-
-
David Kershner authored
The iochannel.h header file references ETH_HLEN which is defined in skbuff. Removed it from visorhba since it was no longer needed. Reviewed-by:
Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Reviewed-by:
Tim Sell <timothy.sell@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Kershner authored
Visorchipset.c was including unnecessary include files, either included by other headers or not needed at all. Reviewed-by:
-
David Kershner authored
Due to include order, the visorbus_private.h file was missing a required include header visorbus.h. If visorchipset.c or visorbus_main.c ever were to change the order of the includes for visobus.h and visorbus_private.h, the code would fail to compile. Reviewed-by:
-
David Kershner authored
A bunch of code churn has caused the following include files to not be needed by visorbus.h: linux/poll.h linux/kernel.h linux/uuid.h linux/seq_file.h Reviewed-by:
-
David Kershner authored
The struct visor_device had a forward declaration that was not needed. Remove it. Reviewed-by:
-
David Kershner authored
Visorbus.h had comments that did not have /* on its own line, this patch makes it uniform. Reviewed-by:
-
David Kershner authored
A comment in channel.h was referencing windows guests, in reality the OS of the guest is agnostic and the comment should reflect that. Reviewed-by:
-
David Kershner authored
We no longer send messages directly to the s-Par event log, so we do not need the throttling defines anymore. Reviewed-by:
-
David Kershner authored
The vdisk task management commands are no longer used by s-Par, this patch removes the definitions for them. Reviewed-by:
-
David Kershner authored
The MAXNUM #define was not being used, and it shouldn't be used. Remove it. Reviewed-by:
-
Sameer Wadgaonkar authored
staging: unisys: visorbus: merging the visorbus_device_pause_response and visorbus_device_resume_response functions into one. The functions viosrbus_device_pause_response() and viosrbus_device_resume_response() are functionally similar. Merging these functions into a single function called visorbus_device_changestate_response(). Signed-off-by:
-
Sameer Wadgaonkar authored
The functions visorbus_create_response(), visorbus_destroy_response(), viosrbus_device_create_response(), viosrbus_device_destroy_response() are all functionally similar. Merging these four functions into a single function called visorbus_response(). Signed-off-by:
-
Steven Matthews authored
Replace use of standard Linux dma_data_direction with a Unisys- specific uis_dma_data_direction and provide a function to convert from the latter to the former. This is necessary because Unisys s-Par depends on the exact format of this field in multiple OSs and languages, and so using the standard version creates an unnecessary dependency between the kernel and s-Par. Signed-off-by:
Steven Matthews <steven.matthews@unisys.com> Signed-off-by:
-
David Binder authored
Removes comments that do not provide any valuable information. Signed-off-by:
David Binder <david.binder@unisys.com> Signed-off-by:
-
David Binder authored
The contents of vmcallinterface.h are better placed within visorchipset.c from an organizational perspective. The values are only used in that file. Signed-off-by:
-
Sameer Wadgaonkar authored
This patch fixes two checkpatch warnings in the visornic_main.c file to avoid multiline dereference. Signed-off-by:
-
Sameer Wadgaonkar authored
Cleaned up the in-line comments in the structure and added a single block comment for the structure. Signed-off-by:
-
Charles Daniels authored
Fixed incorrectly styled function definitions in visorbus/visorchipset.c by placing the function names on the same line as the return. Signed-off-by:
Charles Daniels <cdaniels@fastmail.com> Signed-off-by:
-
Mark Foresta authored
Remove the filename in the comment at the beginning of the file. Signed-off-by:
Mark Foresta <Mark.Foresta@Unisys.com> Signed-off-by:
-
Mark Foresta authored
Moved blocked comment on to own line at beginning of struct to follow standard. Since this is an internal structure, the block comment isn't actually a kernel-doc so we only start the block with one asterisk. Signed-off-by:
-
Andy Shevchenko authored
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. While here, re-indent couple of lines to increase readability. Cc: David Kershner <david.kershner@unisys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: sparmaintainer@unisys.com Cc: devel@driverdev.osuosl.org Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Zohaib Javed authored
Added a new line before issue_vmcall_io_controlvm_addr() function definition. Signed-off-by:
Zohaib Javed <zohaib.javed@gmail.com> Signed-off-by:
-
Zohaib Javed authored
Removed unused #define GPI_ENTRIES_PER_PAGE Signed-off-by:
-
Zohaib Javed authored
The filename was in a comment at the beginning of the file. It is not needed. Signed-off-by:
-
- 20 Aug, 2017 16 commits
-
-
Larry Finger authored
This commit adds the TODO file and implements some reviewers comments made against some patches to the wireless tree. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
-
Larry Finger authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. This commit enables building of the new driver. For this version, all routines are built into a single module r8822be. When this driver is moved to the wireless tree, halmac, phydm, and rtl8822be will become new modules. Signed-off-by:
-
Ping-Ke Shih authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. This commit adds the code for the new r8822be driver. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. New Realtek wireless devices have a new method for PHY control and dynamic management. The RTL8822BE is the first of these devices, thus there is additional code required. In the final version, this code will be a separate module; however, it is combined with the r8822be driver to minimize the interference with the drivers in the wireless tree. Signed-off-by:
-
Ping-Ke Shih authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. New Realtek devices implement a common sub-driver to control the MAC layer. The RTL8822BE is the first of these devices, thus its introduction involves some extra code. In the wireless tree, this will be a separate module; however, it is compiled into the 8822be driver here. Signed-off-by:
-
Ping-Ke Shih authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. This commit adds the routines needed for BT coexistence with the new driver. Signed-off-by:
-
Larry Finger authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. This commit copies the existing routines from .../rtlwifi/btcoexist/ into staging. There are no changes other than removing all EXPORT statements, and the fixing of checkpatch messages. The latter will be backported to the wireless tree. Signed-off-by:
-
Ping-Ke Shih authored
The RTL8822BE, an 802.11ac wireless network card, is now appearing in new computers. Its driver is being placed in staging to reduce the time that users of this new card will have access to in-kernel drivers. This commit copies the code that currently constitutes the rtlwifi and rtl_pci mini drivers. This material is copied into staging to prevent any undo interaction between the existing drivers and this new one. The only changes in this code are the removal of all export statements, and the fixing of some checkpatch messages. The latter will be backported into the wireless tree. Signed-off-by:
-
Alex Briskin authored
Refactor code to be more readable and eliminate the checkpatch warning Signed-off-by:
Alex Briskin <br.shurik@gmail.com> Signed-off-by:
-
Srishti Sharma authored
Fixed alignment so that it matched open parenthesis Signed-off-by:
Srishti Sharma <srishtishar@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Colin Ian King authored
The mask of sns_key_info1 suggests the upper nybble is being extracted however the following shift of 8 bits is too large and always results in 0. Fix this by shifting only by 4 bits to correctly get the upper nybble. Detected by CoverityScan, CID#142891 ("Operands don't affect result") Fixes: fa590c22 ("staging: rts5208: add support for rts5208 and rts5288") Signed-off-by:Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Xiangyang Zhang authored
space required before the open parenthesis, open brace should be on previous line. Signed-off-by:
Xiangyang Zhang <xyz.sun.ok@gmail.com> Signed-off-by:
-
Jamie Huang authored
checkpatch.pl gave ERROR: open brace '{' following function definitions go on the next line. Signed-off-by:Jamie Huang <jamienstar@163.com> Signed-off-by:
-
Dan Carpenter authored
We want to concatonate join string one, a '/' character, string two and then a NUL terminator. The destination buffer holds ori_gf->gf_pathlen characters. The strlen() function returns the number of characters not counting the NUL terminator. So we should be adding two extra spaces, one for the foward slash and one for the NUL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
frank zago <fzago@cray.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 4.14 cycle. New device support: * ak8974 - support the AMI306. * st_magnetometer - add support for the LIS2MDL with bindings. * rockchip-saradc - add binding for rv1108 SoC (no driver change). * srf08 - add srf02 (i2c only) and srf10 support. * stm32-timer - support for the STM32H7 to existing driver. Features: * tools - move over to the tools buildsystem rather than hand rolling. - add an install section to the build. * ak8974 - use serial number to add device randomness. - add AMI306 calibration data output. * ccs811 - triggered buffer support. * srf08 - add a device tree table as the old style i2c probing is going away, - add triggered buffer support * st32-adc - add optional st,min-sample-time-nsecs binding to allow control of sampling against analog circuitry. * stm32-timer - add output compare triggers. * ti-ads1015 - add threshold event support. * ti-ads7950 - Allow use on ACPI platforms including providing a default reference voltage as there is no way to obtain this on ACPI currently. Cleanup and fixes: * ad7606 - fix an error return code in probe. * ads1015 - fix incorrect data rate setting update when capture in progress, - fix wrong scale information for the ADS1115, - make conversions work when CONFIG_PM is not set, - make sure we don't get a stale result after a runtime resume by ensuring we wait long enough, - avoid returning a false error form the buffer setup callbacks, - add enough wait time to get the correct conversion, - remove an unnecessary config register update, - add a helper to set conversion mode reducing repeated boilerplate, - use devm_iio_triggered_buffer_setup to simplify error and remove paths, - use iio_device_claim_direct_mode instead of opencoding the same. * ak8974 - mark the INT_CLEAR register as precious to prevent debugfs access. * apds9300 - constify the i2c_device_id. * at91-sama5 adc - add missing Kconfig dependency. * bma180 accel - constify the i2c_device_id. * rockchip_saradc - explicitly request exclusive reset control as part of the reset rework on going throughout the kernel. * st_accel - fix drdy configuration for a load of accelerometers that only have the int1 line. Fix is unimportant as presumably no deviec tree actually used the non existent hardware line. * st_pressure - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support as they don't have this. Fix is unimportant as presumably no device tree actually used the non existent hardware line. * stm32-dac - explicitly request exclusive reset control (part of reset being reworked). * tsl2583 - constify the i2c_device_id. * xadc - coding style fixes.
-
