- 22 Oct, 2021 13 commits
-
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Manually fix all net/usb drivers without separate maintainers. v2: catc does DMA to the buffer, leave the conversion to Oliver Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by:
-
Jakub Kicinski authored
Silent merge conflict between these two: 3d677735 ("net/mlx5: Lag, move lag files into directory") 14fe2471 ("net/mlx5: Lag, change multipath and bonding to be mutually exclusive") Signed-off-by:
-
David S. Miller authored
M<erge issues... Signed-off-by:David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now
-
Mike Rapoport authored
Vladimir Zapolskiy reports: Commit a7259df7 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df7 ("memblock: make memblock_find_in_range method private") Reported-by:
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Qian Cai <quic_qiancai@quicinc.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Commit 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak") breaks boot on EFI systems with kmemleak and VM_DEBUG enabled: efi: Processing EFI memory map: efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC] ------------[ cut here ]------------ kernel BUG at mm/kmemleak.c:1140! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104 pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kmemleak_free_part_phys+0x64/0x8c lr : kmemleak_free_part_phys+0x38/0x8c sp : ffff800011eafbc0 x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068 x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0 x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000 x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7 x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000 x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0 x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99 x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff Call trace: kmemleak_free_part_phys+0x64/0x8c memblock_mark_nomap+0x5c/0x78 reserve_regions+0x294/0x33c efi_init+0x2d0/0x490 setup_arch+0x80/0x138 start_kernel+0xa0/0x3ec __primary_switched+0xc0/0xc8 Code: 34000041 97d526e7 f9418e80 36000040 (d4210000) random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0 ---[ end trace 0000000000000000 ]--- The crash happens because kmemleak_free_part_phys() tries to use __va() before memstart_addr is initialized and this triggers a VM_BUG_ON() in arch/arm64/include/asm/memory.h: Revert 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak"), the issue it is fixing will be fixed differently. Reported-by:
-
Linus Torvalds authored
Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ... -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle
-
- 21 Oct, 2021 27 commits
-
-
Jakub Kicinski authored
Łukasz Stelmach says: ==================== AX88796C SPI Ethernet Adapter This is a driver for AX88796C Ethernet Adapter connected in SPI mode as found on ARTIK5 evaluation board. The driver has been ported from a v3.10.9 vendor kernel for ARTIK5 board. ==================== Link: https://lore.kernel.org/r/20211020182422.362647-1-l.stelmach@samsung.comSigned-off-by:
-
Łukasz Stelmach authored
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be connected to a CPU with a 8/16-bit bus or with an SPI. This driver supports SPI connection. The driver has been ported from the vendor kernel for ARTIK5[2] boards. Several changes were made to adapt it to the current kernel which include: + updated DT configuration, + clock configuration moved to DT, + new timer, ethtool and gpio APIs, + dev_* instead of pr_* and custom printk() wrappers, + removed awkward vendor power managemtn. + introduced ethtool tunable to control SPI compression [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65 [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/ The other ax88796 driver is for NE2000 compatible AX88796L chip. These chips are not compatible. Hence, two separate drivers are required. Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Łukasz Stelmach authored
Add bindings for AX88796C SPI Ethernet Adapter. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Łukasz Stelmach authored
Add the prefix for ASIX Electronics Corporation. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== enetc: trivial PTP one-step TX timestamping cleanups These are two cleanup patches for some inconsistencies I noticed in the driver's TX ring cleanup function. ==================== Link: https://lore.kernel.org/r/20211020174220.1093032-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
The code checks whether the skb had one-step TX timestamping enabled, in order to schedule the work item for emptying the priv->tx_skbs queue. That code checks for "tx_swbd->skb" directly, when we already had a skb retrieved using enetc_tx_swbd_get_skb(tx_swbd) - a TX software BD can also hold an XDP_TX packet or an XDP frame. But since the direct tx_swbd dereference is in an "if" block guarded by the non-NULL quality of "skb", accessing "tx_swbd->skb" directly is not wrong, just confusing. Just use the local variable named "skb". Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The "priv" variable is needed in the "check_writeback" scope since commit d3982312 ("enetc: add hardware timestamping support"). Since commit 7294380c ("enetc: support PTP Sync packet one-step timestamping"), we also need "priv" in the larger function scope. So the local variable from the "if" block scope is not needed, and actually shadows the other one. Delete it. Signed-off-by:
-
Kim Phillips authored
This reverts commit aae74ff9, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by:
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by:
-
Oliver Neukum authored
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.comSigned-off-by:
-
Vladimir Oltean authored
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835 ("enetc: Enable TC offloading with mqprio") Reported-by:Richie Pearn <richard.pearn@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85 ("enetc: Add ethtool statistics") Signed-off-by:
-
Yang Yingliang authored
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
luo penghao authored
Although if_info_size is assigned, it has not been used. And the variable should also be deleted. The clang_analyzer complains as follows: net/core/rtnetlink.c:3806: warning: Although the value stored to 'if_info_size' is used in the enclosing expression, the value is never actually read from 'if_info_size'. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
luo penghao <luo.penghao@zte.com.cn> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Since the rework, the statistics code always adds up the byte and packet value(s). On 32bit architectures a seqcount_t is used in gnet_stats_basic_sync to ensure that the 64bit values are not modified during the read since two 32bit loads are required. The usage of a seqcount_t requires a lock to ensure that only one writer is active at a time. This lock leads to disabled preemption during the update. The lack of disabling preemption is now creating a warning as reported by Naresh since the query done by gnet_stats_copy_basic() is in preemptible context. For ___gnet_stats_copy_basic() there is no need to disable preemption since the update is performed on stack and can't be modified by another writer. Instead of disabling preemption, to avoid the warning, simply create a read function to just read the values and return as u64. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 67c9e627 ("net: sched: Protect Qdisc::bstats with u64_stats") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Remove the "dsa_to_port in a loop" antipattern v1->v2: more patches v2->v3: less patches As opposed to previous series, I would now like to first refactor the DSA core, since that sees fewer patches than drivers, and make the helpers available. Since the refactoring is fairly noisy, I don't want to force it on driver maintainers right away, patches can be submitted independently. The original cover letter is below: The DSA core and drivers currently iterate too much through the port list of a switch. For example, this snippet: for (port = 0; port < ds->num_ports; port++) { if (!dsa_is_cpu_port(ds, port)) continue; ds->ops->change_tag_protocol(ds, port, tag_ops->proto); } iterates through ds->num_ports once, and then calls dsa_is_cpu_port to filter out the other types of ports. But that function has a hidden call to dsa_to_port() in it, which contains: list_for_each_entry(dp, &dst->ports, list) if (dp->ds == ds && dp->index == p) return dp; where the only thing we wanted to know in the first place was whether dp->type == DSA_PORT_TYPE_CPU or not. So it seems that the problem is that we are not iterating with the right variable. We have an "int port" but in fact need a "struct dsa_port *dp". This has started being an issue since this patch series: https://patchwork.ozlabs.org/project/netdev/cover/20191020031941.3805884-1-vivien.didelot@gmail.com/ The currently proposed set of changes iterates like this: dsa_switch_for_each_cpu_port(cpu_dp, ds) err = ds->ops->change_tag_protocol(ds, cpu_dp->index, tag_ops->proto); which iterates directly over ds->dst->ports, which is a list of struct dsa_port *dp. This makes it much easier and more efficient to check dp->type. As a nice side effect, with the proposed driver API, driver writers are now encouraged to use more efficient patterns, and not only due to less iterations through the port list. For example, something like this: for (port = 0; port < ds->num_ports; port++) do_something(); probably does not need to do_something() for the ports that are disabled in the device tree. But adding extra code for that would look like this: for (port = 0; port < ds->num_ports; port++) { if (!dsa_is_unused_port(ds, port)) continue; do_something(); } and therefore, it is understandable that some driver writers may decide to not bother. This patch series introduces a "dsa_switch_for_each_available_port" macro which comes at no extra cost in terms of lines of code / number of braces to the driver writer, but it has the "dsa_is_unused_port" check embedded within it. ==================== Signed-off-by: -
Vladimir Oltean authored
Pass a single argument to dsa_8021q_rx_vid and dsa_8021q_tx_vid that contains the necessary information from the two arguments that are currently provided: the switch and the port number. Also rename those functions so that they have a dsa_port_* prefix, since they operate on a struct dsa_port *. Signed-off-by:
-
Vladimir Oltean authored
Find the remaining iterators over dst->ports that only filter for the ports belonging to a certain switch, and replace those with the dsa_switch_for_each_port helper that we have now. Signed-off-by:
-
Vladimir Oltean authored
The majority of cross-chip switch notifiers need to filter in some way over the type of ports: some install VLANs etc on all cascade ports. The difference is that the matching function, which filters by port type, is separate from the function where the iteration happens. So this patch needs to refactor the matching functions' prototypes as well, to take the dp as argument. In a future patch/series, I might convert dsa_towards_port to return a struct dsa_port *dp too, but at the moment it is a bit entangled with dsa_routing_port which is also used by mv88e6xxx and they both return an int port. So keep dsa_towards_port the way it is and convert it into a dp using dsa_to_port. Signed-off-by:
-
Vladimir Oltean authored
Find the occurrences of dsa_is_{user,dsa,cpu}_port where a struct dsa_port *dp was already available in the function scope, and replace them with the dsa_port_is_{user,dsa,cpu} equivalent function which uses that dp directly and does not perform another hidden dsa_to_port(). Signed-off-by: -
Vladimir Oltean authored
Find the remaining iterators over dst->ports that only filter for the ports belonging to a certain switch, and replace those with the dsa_switch_for_each_port helper that we have now. Signed-off-by:
-
Vladimir Oltean authored
Ever since Vivien's conversion of the ds->ports array into a dst->ports list, and the introduction of dsa_to_port, iterations through the ports of a switch became quadratic whenever dsa_to_port was needed. dsa_to_port can either be called directly, or indirectly through the dsa_is_{user,cpu,dsa,unused}_port helpers. Use the newly introduced dsa_switch_for_each_port() iteration macro that works with the iterator variable being a struct dsa_port *dp directly, and not an int i. It is an expensive variable to go from i to dp, but cheap to go from dp to i. This macro iterates through the entire ds->dst->ports list and filters by the ports belonging just to the switch provided as argument. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since the DSA conversion from the ds->ports array into the dst->ports list, the DSA API has encouraged driver writers, as well as the core itself, to write inefficient code. Currently, code that wants to filter by a specific type of port when iterating, like {!unused, user, cpu, dsa}, uses the dsa_is_*_port helper. Under the hood, this uses dsa_to_port which iterates again through dst->ports. But the driver iterates through the port list already, so the complexity is quadratic for the typical case of a single-switch tree. This patch introduces some iteration helpers where the iterator is already a struct dsa_port *dp, so that the other variant of the filtering functions, dsa_port_is_{unused,user,cpu_dsa}, can be used directly on the iterator. This eliminates the second lookup. These functions can be used both by the core and by drivers. Signed-off-by: -
Erik Ekman authored
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by:
Erik Ekman <erik@kryo.se> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Erik Ekman authored
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by:
-
