- 16 Nov, 2019 1 commit
-
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Marvell OcteonTX2 network devices. It uses an expilict block comment for the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 15 Nov, 2019 23 commits
-
-
David S. Miller authored
Richard Cochran says: ==================== ptp: Validate the ancillary ioctl flags more carefully. The flags passed to the ioctls for periodic output signals and time stamping of external signals were never checked, and thus formed a useless ABI inadvertently. More recently, a version 2 of the ioctls was introduced in order make the flags meaningful. This series tightens up the checks on the new ioctl flags. - Patch 1 ensures at least one edge flag is set for the new ioctl. - Patches 2-7 are Jacob's recent checks, picking up the tags. - Patch 8 introduces a "strict" flag for passing to the drivers when the new ioctl is used. - Patches 9-12 implement the "strict" checking in the drivers. - Patch 13 extends the test program to exercise combinations of flags. ==================== Signed-off-by: -
Richard Cochran authored
Because each driver and hardware has different capabilities, the test cannot provide a simple pass/fail result, but it can at least show what combinations of flags are supported. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
This driver enables rising edge or falling edge, but not both, and so this patch validates that the request contains only one of the two edges. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Richard Cochran authored
This hardware always time stamps rising and falling edges, and so this patch validates that the request does contains both edges. Signed-off-by:
-
Richard Cochran authored
This driver enables rising edge or falling edge, but not both, and so this patch validates that the request contains only one of the two edges. Signed-off-by:
-
Richard Cochran authored
This driver enables rising edge or falling edge, but not both, and so this patch validates that the request contains only one of the two edges. Signed-off-by:
-
Richard Cochran authored
User space may request time stamps on rising edges, falling edges, or both. However, the particular mode may or may not be supported in the hardware or in the driver. This patch adds a "strict" flag that tells drivers to ensure that the requested mode will be honored. Signed-off-by:
-
Jacob Keller authored
Fix the renesas PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Jacob Keller authored
Fix the mlx5 core PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. [ RC: I'm not 100% sure what this driver does, but if I'm not wrong it follows the dp83640: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge ] Cc: Feras Daoud <ferasda@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: -
Jacob Keller authored
Fix the igb PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. This HW always time stamps both edges: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp both edges PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp both edges PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp both edges PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp both edges Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Jacob Keller authored
Fix the dp83640 PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. For the record, the semantics of this driver are: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge Cc: Stefan Sørensen <stefan.sorensen@spectralink.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Jacob Keller authored
Fix the mv88e6xxx PTP support to explicitly reject any future flags that get added to the external timestamp request ioctl. In order to maintain currently functioning code, this patch accepts all three current flags. This is because the PTP_RISING_EDGE and PTP_FALLING_EDGE flags have unclear semantics and each driver seems to have interpreted them slightly differently. For the record, the semantics of this driver are: flags Meaning ---------------------------------------------------- -------------------------- PTP_ENABLE_FEATURE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp rising edge Cc: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by:
-
Jacob Keller authored
Commit 823eb2a3 ("PTP: add support for one-shot output") introduced a new flag for the PTP periodic output request ioctl. This flag is not currently supported by any driver. Fix all drivers which implement the periodic output request ioctl to explicitly reject any request with flags they do not understand. This ensures that the driver does not accidentally misinterpret the PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future. This is important for forward compatibility: if a new flag is introduced, the driver should reject requests to enable the flag until the driver has actually been modified to support the flag in question. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by:
-
Richard Cochran authored
Commit 41560658 ("PTP: introduce new versions of IOCTLs") introduced a new external time stamp ioctl that validates the flags. This patch extends the validation to ensure that at least one rising or falling edge flag is set when enabling external time stamps. Signed-off-by:
-
Chuhong Yuan authored
The driver calls release_resource in remove to match request_mem_region in probe, which is incorrect. Fix it by using the right one, release_mem_region. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Oliver Neukum authored
If a malicious device gives a short MAC it can elicit up to 5 bytes of leaked memory out of the driver. We need to check for ETH_ALEN instead. Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ido Schimmel authored
mlxsw does not support VXLAN devices with a physical device attached and vetoes such configurations upon enslavement to an offloaded bridge. Commit 0ce1822c ("vxlan: add adjacent link to limit depth level") changed the VXLAN device to be an upper of the physical device which causes mlxsw to veto the creation of the VXLAN device with "Unknown upper device type". This is OK as this configuration is not supported, but it prevents us from testing bad flows involving the enslavement of VXLAN devices with a physical device to a bridge, regardless if the physical device is an mlxsw netdev or not. Adjust the test to use a dummy device as a physical device instead of a mlxsw netdev. Fixes: 0ce1822c ("vxlan: add adjacent link to limit depth level") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes misc fixes for the HNS3 ethernet driver. [patch 1/3] adds a compatible handling for configuration of MAC VLAN swithch parameter. [patch 2/3] re-allocates SSU buffer when pfc_en changed. [patch 3/3] fixes a bug for ETS bandwidth validation. ==================== Signed-off-by: -
Yonglong Liu authored
Some device only support 4 TCs, but the driver check the total bandwidth of 8 TCs, so may cause wrong configurations write to the hw. This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it. Fixes: e432abfb ("net: hns3: add common validation in hclge_dcb") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
When a TC's PFC is disabled or enabled, the RX private buffer for this TC need to be changed too, otherwise this may cause packet dropped problem. This patch fixes it by calling hclge_buffer_alloc to reallocate buffer when pfc_en changes. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Guangbin Huang authored
Previously, hns3 driver just directly send specific setting bit and mask bits of MAC VLAN switch parameter to the firmware, it can not be compatible with the old firmware, because the old one ignores mask bits and covers all bits with new setting bits. So when running with old firmware, the communication between PF and VF will fail after resetting or configuring spoof check, since they will do the MAC VLAN switch parameter configuration. This patch fixes this problem by reading switch parameter firstly, then just modifies the corresponding bit and sends it to firmware. Fixes: dd2956ea ("net: hns3: not allow SSU loopback while execute ethtool -t dev") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Ulrich Hecht authored
Pre-allocates buffers sufficient for the maximum supported MTU (2026) in order to eliminate the possibility of resource exhaustion when changing the MTU while the device is up. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by:
-
Matt Bennett authored
The tipc prefix for log messages generated by tipc was removed in commit 07f6c4bc ("tipc: convert tipc reference table to use generic rhashtable"). This is still a useful prefix so add it back. Signed-off-by:
Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
- 14 Nov, 2019 3 commits
-
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.4-20191114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-14 here another pull request for net/master consisting of one patch (including my S-o-b). Jouni Hogander's patch fixes a memory leak found by the syzbot in the slcan driver's error path. ==================== Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-2019-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.4 Hopefully last fixes for v5.4, only one iwlwifi fix this time. iwlwifi * fix A-MSDU data corruption when using CCMP/GCMP ciphers ==================== Signed-off-by:
-
Jouni Hogander authored
This patch is fixing memory leak reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xffffffffffffffff Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
- 13 Nov, 2019 13 commits
-
-
Dan Carpenter authored
This code is supposed to test for negative error codes and partial reads, but because sizeof() is size_t (unsigned) type then negative error codes are type promoted to high positive values and the condition doesn't work as expected. Fixes: 332f989a ("CDC-NCM: handle incomplete transfer of MTU") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jouni Hogander authored
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected by Syzkaller in slcan. Same issue exists in slip.c and this patch is addressing the leak in slip.c. Here is the slcan memory leak trace reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xfffffffffffffff Cc: "David S. Miller" <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: -
Aleksander Morgado authored
These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The QMI interface is exposed in USB configuration #1: P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.4-20191113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-13 this is a pull request of 9 patches for net/master, hopefully for the v5.4 release cycle. All nine patches are by Oleksij Rempel and fix locking and use-after-free bugs in the j1939 stack found by the syzkaller syzbot. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2019-11-13 1) Fix a page memleak on xfrm state destroy. 2) Fix a refcount imbalance if a xfrm_state gets invaild during async resumption. From Xiaodong Xu. ==================== Signed-off-by: -
Oleksij Rempel authored
j1939_session_destroy() and __j1939_priv_release() should be called only if session, ecu or socket are not linked or used by any one else. If at least one of these resources is linked, then the reference counting is broken somewhere. This warning will be triggered before KASAN will do, and will make it easier to debug initial issue. This works on platforms without KASAN support. Signed-off-by:Oleksij Rempel <o.rempel@pengutronix.de>
-
Oleksij Rempel authored
j1939_can_recv() can be called in parallel with socket release. In this case sk_release and sk_destruct can be done earlier than j1939_can_recv() is processed. Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
can: j1939: transport: j1939_cancel_active_session(): use hrtimer_try_to_cancel() instead of hrtimer_cancel() This part of the code protected by lock used in the hrtimer as well. Using hrtimer_cancel() will trigger dead lock. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
We link the socket to the session to be able provide socket specific notifications. For example messages over error queue. We need to keep the socket held, while we have a reference to it. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
j1939_session_cancel() was modifying session->state without protecting it by locks and without checking actual state of the session. This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel() and adds the missing locking. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with j1939_sk_bind() and j1939_sk_release(). Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL. Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Oleksij Rempel authored
This patch delays the j1939_priv_put() until the socket is destroyed via the sk_destruct callback, to avoid use-after-free problems. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
