- 21 Nov, 2017 40 commits
-
-
Greg Kroah-Hartman authored
-
Johan Hovold authored
commit 74d471b5 upstream. Make sure to free the port private data before returning after a failed probe attempt. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 19a565d9 upstream. Make sure to stop any submitted interrupt and bulk-out URBs before returning after failed probe and when the port is being unbound to avoid later NULL-pointer dereferences in the completion callbacks. Also fix up the related and broken I/O cancellation on failed open and on close. (Note that port->write_urb was never submitted.) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Douglas Fischer authored
commit 771394a5 upstream. Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update mode. Signed-off-by:
Douglas Fischer <douglas.fischer@outlook.com> Signed-off-by:
-
Bernhard Rosenkraenzer authored
commit a0fea602 upstream. Without this patch, K70 LUX keyboards don't work, saying usb 3-3: unable to read config index 0 descriptor/all usb 3-3: can't read configurations, error -110 usb usb3-port3: unable to enumerate USB device Signed-off-by:
Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Signed-off-by:
-
Alan Stern authored
commit 2ef47001 upstream. The USB kerneldoc says that the actual_length field "is read in non-iso completion functions", but the usbfs driver uses it for all URB types in processcompl(). Since not all of the host controller drivers set actual_length for isochronous URBs, programs using usbfs with some host controllers don't work properly. For example, Minas reports that a USB camera controlled by libusb doesn't work properly with a dwc2 controller. It doesn't seem worthwhile to change the HCDs and the documentation, since the in-kernel USB class drivers evidently don't rely on actual_length for isochronous transfers. The easiest solution is for usbfs to calculate the actual_length value for itself, by adding up the lengths of the individual packets in an isochronous transfer. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-and-tested-by:
wlf <wulf@rock-chips.com> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit feb0869d ] Consistently use types from linux/types.h to fix the following linux/rds.h userspace compilation errors: /usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t' uint8_t name[32]; /usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t' uint64_t value; /usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t' uint64_t next_tx_seq; /usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t' uint64_t next_rx_seq; /usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t' uint8_t transport[TRANSNAMSIZ]; /* null term ascii */ /usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t' uint64_t seq; /usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t' uint32_t len; /usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t' uint32_t sndbuf; /usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t' uint32_t rcvbuf; /usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t' uint64_t inum; /usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t' uint64_t hdr_rem; /usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t' uint64_t data_rem; /usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t' uint32_t last_sent_nxt; /usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t' uint32_t last_expected_una; /usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t' uint32_t last_seen_una; /usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t' uint8_t src_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t' uint8_t dst_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t' uint32_t max_send_wr; /usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t' uint32_t max_recv_wr; /usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t' uint32_t max_send_sge; /usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_max; /usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_size; /usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t' typedef uint64_t rds_rdma_cookie_t; /usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t' uint64_t addr; /usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t' uint64_t bytes; /usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t' uint64_t local_vec_addr; /usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t' uint64_t nr_local; /usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t' uint64_t local_addr; /usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t' uint64_t remote_addr; /usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t' uint64_t compare_mask; /usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t' uint64_t swap_mask; /usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t' uint64_t nocarry_mask; /usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t' int32_t status; Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 1786dbf3 ] On the kernel side, sockaddr_storage is #define'd to __kernel_sockaddr_storage. Replacing struct sockaddr_storage with struct __kernel_sockaddr_storage defined by <linux/socket.h> fixes the following linux/rds.h userspace compilation error: /usr/include/linux/rds.h:226:26: error: field 'dest_addr' has incomplete type struct sockaddr_storage dest_addr; Signed-off-by:
-
Sasha Levin authored
This reverts commit ad50561b. There was a mixup with the commit message for two upstream commit that have the same subject line. This revert will be followed by the two commits with proper commit messages. Signed-off-by:
-
Sasha Levin authored
This reverts commit 6145171a. The commit fixes a bug that was only introduced in 4.10, thus is irrelevant for <=4.9. Signed-off-by:
-
Paul Burton authored
[ Upstream commit 9799270a ] Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14524/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Marcin Nowakowski authored
[ Upstream commit e89ef66d ] Memories managed through boot_mem_map are generally expected to define non-crossing areas. However, if part of a larger memory block is marked as reserved, it would still be added to bootmem allocator as an available block and could end up being overwritten by the allocator. Prevent this by explicitly marking the memory as reserved it if exists in the range used by bootmem allocator. Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14608/Signed-off-by:
-
Marcin Nowakowski authored
[ Upstream commit d9b5b658 ] Current init code initialises bootmem allocator with all of the low memory that it assumes is available, but does not check for reserved memory block, which can lead to corruption of data that may be stored there. Move bootmem's allocation map to a location that does not cross any reserved regions Signed-off-by:
-
Chen Gang authored
commit 8f235d1a upstream. __phys_to_pfn and __pfn_to_phys are symmetric, PHYS_PFN and PFN_PHYS are semmetric: - y = (phys_addr_t)x << PAGE_SHIFT - y >> PAGE_SHIFT = (phys_add_t)x - (unsigned long)(y >> PAGE_SHIFT) = x [akpm@linux-foundation.org: use macro arg name `x'] [arnd@arndb.de: include linux/pfn.h for PHYS_PFN definition] Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 08889582 ] When building a kernel targeting a microMIPS ISA, recent GNU linkers will fail the link if they cannot determine that the target of a branch or jump is microMIPS code, with errors such as the following: mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x542c: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-img-linux-gnu-ld: final link failed: Bad value or: ./arch/mips/include/asm/uaccess.h:1017: warning: JALX to a non-word-aligned address Placing anything other than an instruction at the start of a function written in assembly appears to trigger such errors. In order to prepare for allowing us to follow function prologue macros with an EXPORT_SYMBOL invocation, end the prologue macros (LEAD, NESTED & FEXPORT) with a .insn directive. This ensures that the start of the function is marked as code, which always makes sense for functions & safely prevents us from hitting the link errors described above. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14508/Signed-off-by:
-
Jannik Becher authored
[ Upstream commit 502c8074 ] Fixed a sparse warning. Using function le16_to_cpus() to avoid double assignment. Signed-off-by:
Jannik Becher <becher.jannik@gmail.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 1fe954b2 ] FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 2bf1a87b ] The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Tony Nguyen authored
[ Upstream commit 3f0d646b ] A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
-
Emil Tantilov authored
[ Upstream commit f7f37e7f ] When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit 126db13f ] Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by:
-
Jon Mason authored
[ Upstream commit 0cc878d6 ] Nitro firmware is loaded into memory by the bootloader at a specific location. Set this memory range aside to prevent the kernel from using it. Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Kailang Yang authored
[ Upstream commit 28f1f9b2 ] ALC299 was similar as ALC225. Add headset support for ALC299. ALC3271 was for Dell rename. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 4b0ea93f ] Here, pci_iomap can fail, handle this case and return -ENOMEM. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483443027-13444-1-git-send-email-arvind.yadav.cs@gmail.comSigned-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 0eb3fba8 ] If adp5520_bl_setup() fails, sysfs group left unremoved. By the way, fix overcomplicated assignement of error code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit cc21942b ] Once device_register is called for a device its attributes might be accessed. As the callbacks of a lcd device's attributes make use of the lcd_ops, the respective member must be setup before calling device_register. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 874e1f6f ] The pseudo DMA transfer codes in VX222 and VX-pocket driver have a slight bug where they check the buffer boundary wrongly, and may overflow. Also, the zero sample count might be handled badly for the playback (although it shouldn't happen in theory). This patch addresses these issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=141541Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ed3c177d ] The update of stream costs significantly, and we should avoid it unless the stream really has started. Check pipe->running flag instead of pipe->prepared. Signed-off-by:
-
James Smart authored
[ Upstream commit e0165f20 ] Clear the VendorVersion in the PLOGI/PLOGI ACC payload Vendor version info may have been set on fabric login. Before sending PLOGI payloads, ensure that it's cleared. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit e6c6acc0 ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by:
-
James Smart authored
[ Upstream commit 6c9231f6 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by:
-
James Smart authored
[ Upstream commit 104450eb ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by:
-
James Smart authored
[ Upstream commit 6b3b3bdb ] On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by:
-
Galo Navarro authored
[ Upstream commit 401579c2 ] Several lifecycle events in the rtl8188eu driver are logged using the DBG_88E_LEVEL macro from rtw_debug.h, which is tagged as ERROR regardless of the actual level. Below are dmesg excerpts after loading and unloading the module, the messages are misleading as there was no error. [517434.916239] usbcore: registered new interface driver r8188eu [517435.680653] R8188EU: ERROR indicate disassoc [517437.122606] R8188EU: ERROR assoc success [517797.735611] usbcore: deregistering interface driver r8188eu [517797.736069] R8188EU: ERROR indicate disassoc Remove the ERROR prefix from the logs. After the patch, logs are: [517949.873976] usbcore: registered new interface driver r8188eu [517950.592845] R8188EU: indicate disassoc [517951.993973] R8188EU: assoc success [521778.784448] usbcore: deregistering interface driver r8188eu [521778.784838] R8188EU: indicate disassoc Signed-off-by:
Galo Navarro <anglorvaroa@gmail.com> Signed-off-by:
-
subhashj@codeaurora.org authored
[ Upstream commit 4e768e76 ] UFS device requires to perform bkops (back ground operations) periodically but host can control (via auto-bkops parameter of device) when device can perform bkops based on its performance requirements. In general, host would like to enable the device's auto-bkops only when it's not doing any regular data transfer but sometimes device may not behave properly if host keeps the auto-bkops disabled. This change adds the capability to let the device auto-bkops always enabled except suspend. Reviewed-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit ab3dabb3 ] If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias $ After this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias alias: of:N*T*Cqcom,ufshcC* alias: of:N*T*Cqcom,ufshc Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
-
Hannu Lounento authored
[ Upstream commit 76ed5a8f ] Fix an if statement with hw_dbg lines where the logic was inverted with regards to the corresponding return value used in the if statement. Signed-off-by:
Hannu Lounento <hannu.lounento@ge.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@collabora.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Todd Fujinaka authored
[ Upstream commit 9474933c ] Similar to ixgbe, when an interface is part of a namespace it is possible that igb_close() may be called while __igb_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). Extend the rtnl_lock() to protect the call to netif_device_detach() and igb_clear_interrupt_scheme() in __igb_shutdown() and check for netif_device_present() to avoid calling igb_clear_interrupt_scheme() a second time in igb_close(). Also extend the rtnl lock in igb_resume() to netif_device_attach(). Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Aaron Sierra authored
[ Upstream commit 18278533 ] Several people have reported firmware leaving the I210/I211 PHY's page select register set to something other than the default of zero. This causes the first accesses, PHY_IDx register reads, to access something else, resulting in device probe failure: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 This problem began for them after a previous patch I submitted was applied: commit 2a3cdead Author: Aaron Sierra <asierra@xes-inc.com> Date: Tue Nov 3 12:37:09 2015 -0600 igb: Remove GS40G specific defines/functions I personally experienced this problem after attempting to PXE boot from I210 devices using this firmware: Intel(R) Boot Agent GE v1.5.78 Copyright (C) 1997-2014, Intel Corporation Resetting the PHY before reading from it, ensures the page select register is in its default state and doesn't make assumptions about the PHY's register set before the PHY has been probed. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Cc: Chris Arges <carges@vectranetworks.com> Cc: Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Aaron Sierra <asierra@xes-inc.com> Tested-by:
Matwey V. Kornilov <matwey@sai.msu.ru> Tested-by:
Chris J Arges <christopherarges@gmail.com> Tested-by:
-
Arvind Yadav authored
[ Upstream commit 1ae0d5af ] Here, If devm_ioremap_nocache will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
