- 26 Jan, 2022 7 commits
-
-
Miles Chen authored
Fix a build error observed with ARCH=arm DEFCONFIG=allmodconfig build. drivers/usb/gadget/udc/at91_udc.h:174:42: error: format '%d' expects argument of type 'int', but argument 3 has type 'struct gpio_desc *' [-Werror=format=] Fixes: 4a555f2b ("usb: gadget: at91_udc: Convert to GPIO descriptors") Reviewed-by:
Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220119020849.25732-1-miles.chen@mediatek.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robert Hancock authored
The code that looked up the USB3 PHY was ignoring all errors other than EPROBE_DEFER in an attempt to handle the PHY not being present. Fix and simplify the code by using devm_phy_optional_get and dev_err_probe so that a missing PHY is not treated as an error and unexpected errors are handled properly. Fixes: 84770f02 ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220126000253.1586760-3-robert.hancock@calian.comSigned-off-by:
-
Robert Hancock authored
It appears that the PIPE clock should not be selected when only USB 2.0 is being used in the design and no USB 3.0 reference clock is used. Also, the core resets are not required if a USB3 PHY is not in use, and will break things if USB3 is actually used but the PHY entry is not listed in the device tree. Skip core resets and register settings that are only required for USB3 mode when no USB3 PHY is specified in the device tree. Fixes: 84770f02 ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Frank Li authored
Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456d ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Reviewed-by:Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Frank Li <Frank.Li@nxp.com> Testeb-by:
Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.comSigned-off-by:
-
Jon Hunter authored
Commit 7495af93 ("ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash on the Tegra20 Ventana platform in the ulpi_match() function. The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS, registers a ulpi_driver but this driver does not provide an 'id_table', so when ulpi_match() is called on the Tegra20 Ventana platform, it crashes when attempting to deference the id_table pointer which is not valid. The Qualcomm USB HS PHY driver uses device-tree for matching the ULPI driver with the device and so fix this crash by using device-tree for matching if the id_table is not valid. Fixes: ef6a7bcf ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.comSigned-off-by:
-
Pavankumar Kondeti authored
Currently when gadget enumerates in super speed plus, the isoc endpoint request buffer size is not calculated correctly. Fix this by checking the gadget speed against USB_SPEED_SUPER_PLUS and update the request buffer size. Fixes: 90c4d057 ("usb: fix various gadgets null ptr deref on 10gbps cabling.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.comSigned-off-by:
-
Sing-Han Chen authored
CCGx clears Bit 0:Device Interrupt in the INTR_REG if CCGx is reset successfully. However, there might be a chance that other bits in INTR_REG are not cleared due to internal data queued in PPM. This case misleads the driver that CCGx reset failed. The commit checks bit 0 in INTR_REG and ignores other bits. The ucsi driver would reset PPM later. Fixes: 247c554a ("usb: typec: ucsi: add support for Cypress CCGx") Cc: stable@vger.kernel.org Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Sing-Han Chen <singhanc@nvidia.com> Signed-off-by:
Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.comSigned-off-by:
-
- 25 Jan, 2022 8 commits
-
-
Alan Stern authored
The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.eduSigned-off-by:
-
Alan Stern authored
Two people have reported (and mentioned numerous other reports on the web) that VIA's VL817 USB-SATA bridge does not work with the uas driver. Typical log messages are: [ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00 [ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd [ 3606.328584] scsi host14: uas_eh_device_reset_handler success Surprisingly, the devices do seem to work okay for some other people. The cause of the differing behaviors is not known. In the hope of getting the devices to work for the most users, even at the possible cost of degraded performance for some, this patch adds an unusual_devs entry for the VL817 to block it from binding to the uas driver by default. Users will be able to override this entry by means of a module parameter, if they want. CC: <stable@vger.kernel.org> Reported-by:
DocMAX <mail@vacharakis.de> Reported-and-tested-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Badhri Jagan Sridharan authored
With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V causing VSAFE0V to be triggered. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: 28b43d3d ("usb: typec: tcpm: Introduce vsafe0v for vbus") Cc: stable@vger.kernel.org Acked-by:Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220122015520.332507-2-badhri@google.comSigned-off-by:
-
Badhri Jagan Sridharan authored
With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: -
Heikki Krogerus authored
This fixes NULL pointer dereference that happens if component master is registered with empty component match list. Fixes: 730b49aa ("usb: typec: port-mapper: Convert to the component framework") Reported-by:
Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Heikki Krogerus authored
The code that creates the links to the USB ports attached to a connector inside the system assumed that the ACPI nodes (fwnodes) always exist for the connectors, but it can not do that. There is no guarantee that every USB Type-C connector has ACPI device node representing it in the ACPI tables, and even if there are the nodes in the ACPI tables, the _STA method in those nodes may still return 0 (which means the device does not exist from ACPI PoW). This fixes NULL pointer dereference that happens if the nodes are missing. Fixes: 730b49aa ("usb: typec: port-mapper: Convert to the component framework") Reported-and-tested-by:
Robert Święcki <robert@swiecki.net> Reported-by:
Marc Zyngier <maz@kernel.org> Acked-by:
-
Xu Yang authored
With the AMS and Collision Avoidance, tcpm often needs to change the CC's termination. When one CC line is sourcing Vconn, if we still change its termination, the voltage of the another CC line is likely to be fluctuant and unstable. Therefore, we should verify whether a CC line is sourcing Vconn before changing its termination and only change the termination that is not a Vconn line. This can be done by reading the Vconn Present bit of POWER_ STATUS register. To determine the polarity, we can read the Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be sourced if Plug Orientation is set. Fixes: 0908c5ac ("usb: typec: tcpm: AMS and Collision Avoidance") cc: <stable@vger.kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.comSigned-off-by:
-
Linyu Yuan authored
when CONFIG_USB_ROLE_SWITCH is not defined, add usb_role_switch_find_by_fwnode() definition which return NULL. Fixes: c6919d5e ("usb: roles: Add usb_role_switch_find_by_fwnode()") Signed-off-by:
Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.comSigned-off-by:
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 19 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
Masahiro Yamada authored
This reverts commit cd8c917a. Commit 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by:
-
Dmitry V. Levin authored
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: - multichannel fixes, addressing additional reconnect and DFS scenarios - reenabling fscache support (indexing rewrite, metadata caching e.g.) - send additional version information during NTLMSSP negotiate to improve debugging - fix for a mount race - DFS fixes - fix for a memory leak for stable * tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number smb3: send NTLMSSP version information cifs: Support fscache indexing rewrite cifs: cifs_ses_mark_for_reconnect should also update reconnect bits cifs: update tcpStatus during negotiate and sess setup cifs: make status checks in version independent callers cifs: remove repeated state change in dfs tree connect cifs: fix the cifs_reconnect path for DFS cifs: remove unused variable ses_selected cifs: protect all accesses to chan_* with chan_lock cifs: fix the connection state transitions with multichannel cifs: check reconnects for channels of active tcons too smb3: add new defines from protocol specification cifs: serialize all mount attempts cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty cifs: clean up an inconsistent indenting cifs: free ntlmsspblob allocated in negotiate
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "One of the patches removes some dead code from xfs_ioctl32.h and the other fixes broken workqueue flushing in the inode garbage collector. - Minor cleanup of ioctl32 cruft - Clean up open coded inodegc workqueue function calls" * tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: flush inodegc workqueue tasks before cancel xfs: remove unused xfs_ioctl32.h declarations
-
Linus Torvalds authored
Merge tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull more fscache updates from David Howells: "A set of fixes and minor updates for the fscache rewrite: - Fix mishandling of volume collisions (the wait condition is inverted and so it was only waiting if the volume collision was already resolved). - Fix miscalculation of whether there's space available in cachefiles. - Make sure a default cache name is set on a cache if the user hasn't set one by the time they bind the cache. - Adjust the way the backing inode is presented in tracepoints, add a tracepoint for mkdir and trace directory lookup. - Add a tracepoint for failure to set the active file mark. - Add an explanation of the checks made on the backing filesystem. - Check that the backing filesystem supports tmpfile. - Document how the page-release cancellation of the read-skip optimisation works. And I've included a change for netfslib: - Make ops->init_rreq() optional" * tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make ops->init_rreq() optional fscache: Add a comment explaining how page-release optimisation works cachefiles: Check that the backing filesystem supports tmpfiles cachefiles: Explain checks in a comment cachefiles: Trace active-mark failure cachefiles: Make some tracepoint adjustments cachefiles: set default tag name if it's unspecified cachefiles: Calculate the blockshift in terms of bytes, not pages fscache: Fix the volume collision wait condition
-
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull more folio updates from Matthew Wilcox: "Three small folio patches. One bug fix, one patch pulled forward from the patches destined for 5.18 and then a patch to make use of that functionality" * tag 'folio-5.17a' of git://git.infradead.org/users/willy/pagecache: filemap: Use folio_put_refs() in filemap_free_folio() mm: Add folio_put_refs() pagevec: Initialise folio_batch->percpu_pvec_drained
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: nsp_cs: Check of ioremap return value scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl() scsi: ufs: Modify Tactive time setting conditions scsi: efct: Remove useless DMA-32 fallback configuration scsi: message: fusion: mptctl: Use dma_alloc_coherent() scsi: message: fusion: mptsas: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info() scsi: message: fusion: mptbase: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory() scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API scsi: megaraid: Avoid mismatched storage type sizes scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy() scsi: aic79xx: Remove redundant error variable scsi: pm80xx: Port reset timeout error handling correction scsi: mpi3mr: Fix formatting problems in some kernel-doc comments scsi: mpi3mr: Fix some spelling mistakes scsi: mpt3sas: Update persistent trigger pages from sysfs interface scsi: core: Fix scsi_mode_select() interface scsi: aacraid: Fix spelling of "its" scsi: qedf: Fix potential dereference of NULL pointer
-
