- 08 Jun, 2018 40 commits
-
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e1ebd0e5 ] Current code in power_pmu_disable() does not clear the sampling registers like Sampling Instruction Address Register (SIAR) and Sampling Data Address Register (SDAR) after disabling the PMU. Since these are userspace readable and could contain kernel addresses, add code to explicitly clear the content of these registers. Also add a "context synchronizing instruction" to enforce no further updates to these registers as suggested by Power ISA v3.0B. From section 9.4, on page 1108: "If an mtspr instruction is executed that changes the value of a Performance Monitor register other than SIAR, SDAR, and SIER, the change is not guaranteed to have taken effect until after a subsequent context synchronizing instruction has been executed (see Chapter 11. "Synchronization Requirements for Context Alterations" on page 1133)." Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Massage change log and add ISA reference] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Madhavan Srinivasan authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit bb19af81 ] The current Branch History Rolling Buffer (BHRB) code does not check for any privilege levels before updating the data from BHRB. This could leak kernel addresses to userspace even when profiling only with userspace privileges. Add proper checks to prevent it. Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit b3a5ac42 ] On 32bit platforms, time_t is still a signed 32bit long. If it is overflowed, userspace and the kernel cant agree on the current system time. This causes multiple issues, in particular with systemd: https://github.com/systemd/systemd/issues/1143 A good workaround is to simply avoid using hctosys which is something I greatly encourage as the time is better set by userspace. However, many distribution enable it and use systemd which is rendering the system unusable in case the RTC holds a date after 2038 (and more so after 2106). Many drivers have workaround for this case and they should be eliminated so there is only one place left to fix when userspace is able to cope with dates after the 31bit overflow. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 415eb2a1 ] pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip register bit is set to 1 for DC mode. This got mixed up, and writing 1 into pwmX_mode resulted in DC mode enabled. Fix it up by using the ABI definition throughout the driver for consistency. Fixes: 77eb5b37 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Helge Deller authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit b845f66f ] Carlo Pisani noticed that his C3600 workstation behaved unstable during heavy I/O on the PCI bus with a VIA VT6421 IDE/SATA PCI card. To avoid such instability, this patch switches the LBA PCI bus from Hard Fail mode into Soft Fail mode. In this mode the bus will return -1UL for timed out MMIO transactions, which is exactly how the x86 (and most other architectures) PCI busses behave. This patch is based on a proposal by Grant Grundler and Kyle McMartin 10 years ago: https://www.spinics.net/lists/linux-parisc/msg01027.html Cc: Carlo Pisani <carlojpisani@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Reviewed-by:
Grant Grundler <grantgrundler@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Greg Ungerer authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit f61e6431 ] As of commit 205e1b7f ("dma-mapping: warn when there is no coherent_dma_mask") the Freescale FEC driver is issuing the following warning on driver initialization on ColdFire systems: WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4 Stack from 41833dd8: 41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000 400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d 40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000 00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8 7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c 40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000 Call Trace: [<40025534>] 0x40025534 [<4004e514>] 0x4004e514 [<400255de>] 0x400255de [<40159e20>] 0x40159e20 [<40159e20>] 0x40159e20 It is not fatal, the driver and the system continue to function normally. As per the warning the coherent_dma_mask is not set on this device. There is nothing special about the DMA memory coherency on this hardware so we can just set the mask to 32bits in the platform data for the FEC ethernet devices. Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 0834d627 ] In mpic_physmask() we loop over all CPUs up to 32, then get the hard SMP processor id of that CPU. Currently that's possibly walking off the end of the paca array, but in a future patch we will change the paca array to be an array of pointers, and in that case we will get a NULL for missing CPUs and oops. eg: Unable to handle kernel paging request for data at address 0x88888888888888b8 Faulting instruction address: 0xc00000000004e380 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP .mpic_set_affinity+0x60/0x1a0 LR .irq_do_set_affinity+0x48/0x100 Fix it by checking the CPU is possible, this also fixes the code if there are gaps in the CPU numbering which probably never happens on mpic systems but who knows. Debugged-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Lenny Szubowicz authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 8b29d29a ] Fix once per second (round_robin_time) memory leak of about 1 KB in each acpi_pad kernel idling thread that is activated. Found by testing with kmemleak. Signed-off-by:
Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit c37a3c94 ] If acpi_id is == nr_acpi_bits, then we access one element beyond the end of the acpi_psd[] array or we set one bit beyond the end of the bit map when we do __set_bit(acpi_id, acpi_id_present); Fixes: 59a56802 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Jeff Mahoney authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 8a5a916d ] While running btrfs/011, I hit the following lockdep splat. This is the important bit: pcpu_alloc+0x1ac/0x5e0 __percpu_counter_init+0x4e/0xb0 btrfs_init_fs_root+0x99/0x1c0 [btrfs] btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs] resolve_indirect_refs+0x130/0x830 [btrfs] find_parent_nodes+0x69e/0xff0 [btrfs] btrfs_find_all_roots_safe+0xa0/0x110 [btrfs] btrfs_find_all_roots+0x50/0x70 [btrfs] btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs] btrfs_commit_transaction+0x3ce/0x9b0 [btrfs] The percpu_counter_init call in btrfs_alloc_subvolume_writers uses GFP_KERNEL, which we can't do during transaction commit. This switches it to GFP_NOFS. ======================================================== WARNING: possible irq lock inversion dependency detected 4.12.14-kvmsmall #8 Tainted: G W -------------------------------------------------------- kswapd0/50 just changed the state of lock: (&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] but this lock took another, RECLAIM_FS-unsafe lock in the past: (pcpu_alloc_mutex){+.+.+.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Chain exists of: &delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcpu_alloc_mutex); local_irq_disable(); lock(&delayed_node->mutex); lock(&found->groups_sem); <Interrupt> lock(&delayed_node->mutex); *** DEADLOCK *** 2 locks held by kswapd0/50: #0: (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0 #1: (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50 the shortest dependencies between 2nd lock and 1st lock: -> (pcpu_alloc_mutex){+.+.+.} ops: 4904 { HARDIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 kmem_cache_init_late+0x42/0x75 start_kernel+0x343/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 SOFTIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 kmem_cache_init_late+0x42/0x75 start_kernel+0x343/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 RECLAIM_FS-ON-W at: __kmalloc+0x47/0x310 pcpu_extend_area_map+0x2b/0xc0 pcpu_alloc+0x3ec/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 __do_tune_cpucache+0x2c/0x220 do_tune_cpucache+0x26/0xc0 enable_cpucache+0x6d/0xf0 __kmem_cache_create+0x1bf/0x390 create_cache+0xba/0x1b0 kmem_cache_create+0x1f8/0x2b0 ksm_init+0x6f/0x19d do_one_initcall+0x50/0x1b0 kernel_init_freeable+0x201/0x289 kernel_init+0xa/0x100 ret_from_fork+0x3a/0x50 INITIAL USE at: __mutex_lock+0x4e/0x8c0 pcpu_alloc+0x1ac/0x5e0 alloc_kmem_cache_cpus.isra.70+0x25/0xa0 setup_cpu_cache+0x2f/0x1f0 __kmem_cache_create+0x1bf/0x390 create_boot_cache+0x8b/0xb1 kmem_cache_init+0xa1/0x19e start_kernel+0x270/0x4cb x86_64_start_kernel+0x127/0x134 secondary_startup_64+0xa5/0xb0 } ... key at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0 ... acquired at: pcpu_alloc+0x1ac/0x5e0 __percpu_counter_init+0x4e/0xb0 btrfs_init_fs_root+0x99/0x1c0 [btrfs] btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs] resolve_indirect_refs+0x130/0x830 [btrfs] find_parent_nodes+0x69e/0xff0 [btrfs] btrfs_find_all_roots_safe+0xa0/0x110 [btrfs] btrfs_find_all_roots+0x50/0x70 [btrfs] btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs] btrfs_commit_transaction+0x3ce/0x9b0 [btrfs] transaction_kthread+0x176/0x1b0 [btrfs] kthread+0x102/0x140 ret_from_fork+0x3a/0x50 -> (&fs_info->commit_root_sem){++++..} ops: 1566382 { HARDIRQ-ON-W at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 HARDIRQ-ON-R at: down_read+0x35/0x90 caching_thread+0x57/0x560 [btrfs] normal_work_helper+0x1c0/0x5e0 [btrfs] process_one_work+0x1e0/0x5c0 worker_thread+0x44/0x390 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-R at: down_read+0x35/0x90 caching_thread+0x57/0x560 [btrfs] normal_work_helper+0x1c0/0x5e0 [btrfs] process_one_work+0x1e0/0x5c0 worker_thread+0x44/0x390 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 INITIAL USE at: down_write+0x3e/0xa0 cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] cow_file_range.isra.66+0x133/0x470 [btrfs] run_delalloc_range+0x121/0x410 [btrfs] writepage_delalloc.isra.50+0xfe/0x180 [btrfs] __extent_writepage+0x19a/0x360 [btrfs] extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs] extent_writepages+0x4d/0x60 [btrfs] do_writepages+0x1a/0x70 __filemap_fdatawrite_range+0xa7/0xe0 btrfs_rename+0x5ee/0xdb0 [btrfs] vfs_rename+0x52a/0x7e0 SyS_rename+0x351/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs] ... acquired at: cache_block_group+0x287/0x420 [btrfs] find_free_extent+0x106c/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs] btrfs_create_tree+0xbb/0x2a0 [btrfs] btrfs_create_uuid_tree+0x37/0x140 [btrfs] open_ctree+0x23c0/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> (&found->groups_sem){++++..} ops: 2134587 { HARDIRQ-ON-W at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 HARDIRQ-ON-R at: down_read+0x35/0x90 btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs] open_ctree+0x207b/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-W at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-R at: down_read+0x35/0x90 btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs] open_ctree+0x207b/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 INITIAL USE at: down_write+0x3e/0xa0 __link_block_group+0x34/0x130 [btrfs] btrfs_read_block_groups+0x33d/0x7b0 [btrfs] open_ctree+0x2054/0x2660 [btrfs] btrfs_mount+0xd36/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 btrfs_mount+0x18c/0xf90 [btrfs] mount_fs+0x3a/0x160 vfs_kern_mount+0x66/0x150 do_mount+0x1c1/0xcc0 SyS_mount+0x7e/0xd0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs] ... acquired at: find_free_extent+0xcb4/0x12d0 [btrfs] btrfs_reserve_extent+0xd8/0x170 [btrfs] btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs] __btrfs_cow_block+0x110/0x5b0 [btrfs] btrfs_cow_block+0xd7/0x290 [btrfs] btrfs_search_slot+0x1f6/0x960 [btrfs] btrfs_lookup_inode+0x2a/0x90 [btrfs] __btrfs_update_delayed_inode+0x65/0x210 [btrfs] btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs] btrfs_evict_inode+0x3fe/0x6a0 [btrfs] evict+0xc4/0x190 __dentry_kill+0xbf/0x170 dput+0x2ae/0x2f0 SyS_rename+0x2a6/0x3b0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 -> (&delayed_node->mutex){+.+.-.} ops: 5580204 { HARDIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 SOFTIRQ-ON-W at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 IN-RECLAIM_FS-W at: __mutex_lock+0x4e/0x8c0 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 INITIAL USE at: __mutex_lock+0x4e/0x8c0 btrfs_delayed_update_inode+0x46/0x6e0 [btrfs] btrfs_update_inode+0x83/0x110 [btrfs] btrfs_dirty_inode+0x62/0xe0 [btrfs] touch_atime+0x8c/0xb0 do_generic_file_read+0x818/0xb10 __vfs_read+0xdc/0x150 vfs_read+0x8a/0x130 SyS_read+0x45/0xa0 do_syscall_64+0x79/0x1e0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 } ... key at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs] ... acquired at: __lock_acquire+0x264/0x11c0 lock_acquire+0xbd/0x1e0 __mutex_lock+0x4e/0x8c0 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ret_from_fork+0x3a/0x50 stack backtrace: CPU: 1 PID: 50 Comm: kswapd0 Tainted: G W 4.12.14-kvmsmall #8 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x78/0xb7 print_irq_inversion_bug.part.38+0x19f/0x1aa check_usage_forwards+0x102/0x120 ? ret_from_fork+0x3a/0x50 ? check_usage_backwards+0x110/0x110 mark_lock+0x16c/0x270 __lock_acquire+0x264/0x11c0 ? pagevec_lookup_entries+0x1a/0x30 ? truncate_inode_pages_range+0x2b3/0x7f0 lock_acquire+0xbd/0x1e0 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] __mutex_lock+0x4e/0x8c0 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] ? btrfs_evict_inode+0x1f6/0x6a0 [btrfs] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs] btrfs_evict_inode+0x22c/0x6a0 [btrfs] evict+0xc4/0x190 dispose_list+0x35/0x50 prune_icache_sb+0x42/0x50 super_cache_scan+0x139/0x190 shrink_slab+0x262/0x5b0 shrink_node+0x2eb/0x2f0 kswapd+0x2eb/0x890 kthread+0x102/0x140 ? mem_cgroup_shrink_node+0x2c0/0x2c0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x3a/0x50 Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 8434ec46 ] When logging an inode, at tree-log.c:copy_items(), if we call btrfs_next_leaf() at the loop which checks for the need to log holes, we need to make sure copy_items() returns the value 1 to its caller and not 0 (on success). This is because the path the caller passed was released and is now different from what is was before, and the caller expects a return value of 0 to mean both success and that the path has not changed, while a return value of 1 means both success and signals the caller that it can not reuse the path, it has to perform another tree search. Even though this is a case that should not be triggered on normal circumstances or very rare at least, its consequences can be very unpredictable (especially when replaying a log tree). Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 3c0efdf0 ] The extent tree of the test fs is like the following: BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919 item 0 key (4096 168 4096) itemoff 3944 itemsize 51 extent refs 1 gen 1 flags 2 tree block key (68719476736 0 0) level 1 ^^^^^^^ ref#0: tree block backref root 5 And it's using an empty tree for fs tree, so there is no way that its level can be 1. For REAL (created by mkfs) fs tree backref with no skinny metadata, the result should look like: item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51 refs 1 gen 4 flags TREE_BLOCK tree block key (256 INODE_ITEM 0) level 0 ^^^^^^^ tree block backref root 5 Fix the level to 0, so it won't break later tree level checker. Fixes: faa2dbf0 ("Btrfs: add sanity tests for new qgroup accounting code") Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Vicente Bergas authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a41e0796 ] This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it. Product information: https://wikidevi.com/wiki/Edimax_EW-7611ULB >From /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=a611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Florian Fainelli authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 60d6e6f0 ] bgmac_dma_tx_ring_free() assigns the ctl1 word which is a litle endian 32-bit word without using proper accessors, fix this, and because a length cannot be negative, use unsigned int while at it. Fixes: 9cde9450 ("bgmac: implement scatter/gather support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bryan O'Donoghue authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 1485991c ] commit 179a502f ("rtc: snvs: add Freescale rtc-snvs driver") introduces the SNVS RTC driver with a function snvs_rtc_enable(). snvs_rtc_enable() can return an error on the enable path however this driver does not currently trap that failure on the probe() path and consequently if enabling the RTC fails we encounter a later error spinning forever in rtc_write_sync_lp(). [ 36.093481] [<c010d630>] (__irq_svc) from [<c0c2e9ec>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 36.102122] [<c0c2e9ec>] (_raw_spin_unlock_irqrestore) from [<c072e32c>] (regmap_read+0x4c/0x5c) [ 36.110938] [<c072e32c>] (regmap_read) from [<c085d0f4>] (rtc_write_sync_lp+0x6c/0x98) [ 36.118881] [<c085d0f4>] (rtc_write_sync_lp) from [<c085d160>] (snvs_rtc_alarm_irq_enable+0x40/0x4c) [ 36.128041] [<c085d160>] (snvs_rtc_alarm_irq_enable) from [<c08567b4>] (rtc_timer_do_work+0xd8/0x1a8) [ 36.137291] [<c08567b4>] (rtc_timer_do_work) from [<c01441b8>] (process_one_work+0x28c/0x76c) [ 36.145840] [<c01441b8>] (process_one_work) from [<c01446cc>] (worker_thread+0x34/0x58c) [ 36.153961] [<c01446cc>] (worker_thread) from [<c014aee4>] (kthread+0x138/0x150) [ 36.161388] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20) [ 36.168635] rcu_sched kthread starved for 2602 jiffies! g496 c495 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0 [ 36.178564] rcu_sched R running task 0 8 2 0x00000000 [ 36.185664] [<c0c288b0>] (__schedule) from [<c0c29134>] (schedule+0x3c/0xa0) [ 36.192739] [<c0c29134>] (schedule) from [<c0c2db80>] (schedule_timeout+0x78/0x4e0) [ 36.200422] [<c0c2db80>] (schedule_timeout) from [<c01a7ab0>] (rcu_gp_kthread+0x648/0x1864) [ 36.208800] [<c01a7ab0>] (rcu_gp_kthread) from [<c014aee4>] (kthread+0x138/0x150) [ 36.216309] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20) This patch fixes by parsing the result of rtc_write_sync_lp() and propagating both in the probe and elsewhere. If the RTC doesn't start we don't proceed loading the driver and don't get into this loop mess later on. Fixes: 179a502f ("rtc: snvs: add Freescale rtc-snvs driver") Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
David S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit d13864b6 ] This avoids a lot of -Wunused warnings such as: ==================== kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) ./arch/sparc/include/asm/atomic_64.h:86:30: note: in expansion of macro ‘xchg’ #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) ^~~~ kernel/debug/debug_core.c:508:4: note: in expansion of macro ‘atomic_xchg’ atomic_xchg(&kgdb_active, cpu); ^~~~~~~~~~~ ==================== Signed-off-by:
-
David Howells authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 2c984257 ] If the fscache asynchronous write operation elects to discard a page that's pending storage to the cache because the page would be over the store limit then it needs to wake the page as someone may be waiting on completion of the write. The problem is that the store limit may be updated by a different asynchronous operation - and so may miss the write - and that the store limit may not even get updated until later by the netfs. Fix the kernel hang by making fscache_write_op() mark as written any pages that are over the limit. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit add5ff7a ] Exit to userspace with KVM_INTERNAL_ERROR_EMULATION if we encounter an exception in Protected Mode while emulating guest due to invalid guest state. Unlike Big RM, KVM doesn't support emulating exceptions in PM, i.e. PM exceptions are always injected via the VMCS. Because we will never do VMRESUME due to emulation_required, the exception is never realized and we'll keep emulating the faulting instruction over and over until we receive a signal. Exit to userspace iff there is a pending exception, i.e. don't exit simply on a requested event. The purpose of this check and exit is to aid in debugging a guest that is in all likelihood already doomed. Invalid guest state in PM is extremely limited in normal operation, e.g. it generally only occurs for a few instructions early in BIOS, and any exception at this time is all but guaranteed to be fatal. Non-vectored interrupts, e.g. INIT, SIPI and SMI, can be cleanly handled/emulated, while checking for vectored interrupts, e.g. INTR and NMI, without hitting false positives would add a fair amount of complexity for almost no benefit (getting hit by lightning seems more likely than encountering this specific scenario). Add a WARN_ON_ONCE to vmx_queue_exception() if we try to inject an exception via the VMCS and emulation_required is true. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit d29a2064 ] While running rt-tests' pi_stress program I got the following splat: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20 [...] <IRQ> enqueue_top_rt_rq+0xf4/0x150 ? cpufreq_dbs_governor_start+0x170/0x170 sched_rt_rq_enqueue+0x65/0x80 sched_rt_period_timer+0x156/0x360 ? sched_rt_rq_enqueue+0x80/0x80 __hrtimer_run_queues+0xfa/0x260 hrtimer_interrupt+0xcb/0x220 smp_apic_timer_interrupt+0x62/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> [...] do_idle+0x183/0x1e0 cpu_startup_entry+0x5f/0x70 start_secondary+0x192/0x1d0 secondary_startup_64+0xa5/0xb0 We can get rid of it be the "traditional" means of adding an update_rq_clock() call after acquiring the rq->lock in do_sched_rt_period_timer(). The case for the RT task throttling (which this workload also hits) can be ignored in that the skip_update call is actually bogus and quite the contrary (the request bits are removed/reverted). By setting RQCF_UPDATED we really don't care if the skip is happening or not and will therefore make the assert_clock_updated() check happy. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: linux-kernel@vger.kernel.org Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jun Piao authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit bb34f24c ] We should not handle migrate lockres if we are already in 'DLM_CTXT_IN_SHUTDOWN', as that will cause lockres remains after leaving dlm domain. At last other nodes will get stuck into infinite loop when requsting lock from us. The problem is caused by concurrency umount between nodes. Before receiveing N1's DLM_BEGIN_EXIT_DOMAIN_MSG, N2 has picked up N1 as the migrate target. So N2 will continue sending lockres to N1 even though N1 has left domain. N1 N2 (owner) touch file access the file, and get pr lock begin leave domain and pick up N1 as new owner begin leave domain and migrate all lockres done begin migrate lockres to N1 end leave domain, but the lockres left unexpectedly, because migrate task has passed [piaojun@huawei.com: v3] Link: http://lkml.kernel.org/r/5A9CBD19.5020107@huawei.com Link: http://lkml.kernel.org/r/5A99F028.2090902@huawei.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Reviewed-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nikolay Borisov authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 1e1c50a9 ] do_chunk_alloc implements a loop checking whether there is a pending chunk allocation and if so causes the caller do loop. Generally this loop is executed only once, however testing with btrfs/072 on a single core vm machines uncovered an extreme case where the system could loop indefinitely. This is due to a missing cond_resched when loop which doesn't give a chance to the previous chunk allocator finish its job. The fix is to simply add the missing cond_resched. Fixes: 6d74119f ("Btrfs: avoid taking the chunk_mutex in do_chunk_alloc") Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 80c0b421 ] 0, 1 and <0 can be returned by btrfs_next_leaf(), and when <0 is returned, path->nodes[0] could be NULL, log_dir_items lacks such a check for <0 and we may run into a null pointer dereference panic. Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit b98def7c ] If errors were returned by btrfs_next_leaf(), replay_dir_deletes needs to bail out, otherwise @ret would be forced to be 0 after 'break;' and the caller won't be aware of it. Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by:
-
Huang Ying authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e92bb4dd ] When page_mapping() is called and the mapping is dereferenced in page_evicatable() through shrink_active_list(), it is possible for the inode to be truncated and the embedded address space to be freed at the same time. This may lead to the following race. CPU1 CPU2 truncate(inode) shrink_active_list() ... page_evictable(page) truncate_inode_page(mapping, page); delete_from_page_cache(page) spin_lock_irqsave(&mapping->tree_lock, flags); __delete_from_page_cache(page, NULL) page_cache_tree_delete(..) ... mapping = page_mapping(page); page->mapping = NULL; ... spin_unlock_irqrestore(&mapping->tree_lock, flags); page_cache_free_page(mapping, page) put_page(page) if (put_page_testzero(page)) -> false - inode now has no pages and can be freed including embedded address_space mapping_unevictable(mapping) test_bit(AS_UNEVICTABLE, &mapping->flags); - we've dereferenced mapping which is potentially already free. Similar race exists between swap cache freeing and page_evicatable() too. The address_space in inode and swap cache will be freed after a RCU grace period. So the races are fixed via enclosing the page_mapping() and address_space usage in rcu_read_lock/unlock(). Some comments are added in code to make it clear what is protected by the RCU read lock. Link: http://lkml.kernel.org/r/20180212081227.1940-1-ying.huang@intel.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Claudio Imbrenda authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 77da2ba0 ] This patch fixes a corner case for KSM. When two pages belong or belonged to the same transparent hugepage, and they should be merged, KSM fails to split the page, and therefore no merging happens. This bug can be reproduced by: * making sure ksm is running (in case disabling ksmtuned) * enabling transparent hugepages * allocating a THP-aligned 1-THP-sized buffer e.g. on amd64: posix_memalign(&p, 1<<21, 1<<21) * filling it with the same values e.g. memset(p, 42, 1<<21) * performing madvise to make it mergeable e.g. madvise(p, 1<<21, MADV_MERGEABLE) * waiting for KSM to perform a few scans The expected outcome is that the all the pages get merged (1 shared and the rest sharing); the actual outcome is that no pages get merged (1 unshared and the rest volatile) The reason of this behaviour is that we increase the reference count once for both pages we want to merge, but if they belong to the same hugepage (or compound page), the reference counter used in both cases is the one of the head of the compound page. This means that split_huge_page will find a value of the reference counter too high and will fail. This patch solves this problem by testing if the two pages to merge belong to the same hugepage when attempting to merge them. If so, the hugepage is split safely. This means that the hugepage is not split if not necessary. Link: http://lkml.kernel.org/r/1521548069-24758-1-git-send-email-imbrenda@linux.vnet.ibm.comSigned-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Co-authored-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
-
Esben Haabendal authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 76327a35 ] The datasheet specifies a 3uS pause after performing a software reset. The default implementation of genphy_soft_reset() does not provide this, so implement soft_reset with the needed pause. Signed-off-by:
Esben Haabendal <eha@deif.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Dave Carroll authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 1c6b41fb ] If a recursive IOP_RESET is invoked, usually due to the eh_thread handling errors after the first reset, be sure we flag that the command thread has been stopped to avoid an Oops of the form; [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le) [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620804] Call Trace: [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable) [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid] [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid] [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [ 336.645971] Instruction dump: [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]- So flag when the thread is stopped by setting the thread pointer to NULL. Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Shunyong Yang authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 8913315e ] When multiple CPUs are related in one cpufreq policy, the first online CPU will be chosen by default to handle cpufreq operations. Let's take cpu0 and cpu1 as an example. When cpu0 is offline, policy->cpu will be shifted to cpu1. cpu1's perf capabilities should be initialized. Otherwise, perf capabilities are 0s and speed change can not take effect. This patch copies perf capabilities of the first online CPU to other shared CPUs when policy shared type is CPUFREQ_SHARED_TYPE_ANY. Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by:
-
Carlos Maiolino authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 8c81dd46 ] Forcing the log to disk after reading the agf is wrong, we might be calling xfs_log_force with XFS_LOG_SYNC with a metadata lock held. This can cause a deadlock when racing a fstrim with a filesystem shutdown. The deadlock has been identified due a miscalculation bug in device-mapper dm-thin, which returns lack of space to its users earlier than the device itself really runs out of space, changing the device-mapper volume into an error state. The problem happened while filling the filesystem with a single file, triggering the bug in device-mapper, consequently causing an IO error and shutting down the filesystem. If such file is removed, and fstrim executed before the XFS finishes the shut down process, the fstrim process will end up holding the buffer lock, and going to sleep on the cil wait queue. At this point, the shut down process will try to wake up all the threads waiting on the cil wait queue, but for this, it will try to hold the same buffer log already held my the fstrim, locking up the filesystem. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Jens Axboe authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 2d097c50 ] We can't just use scsi_cd() to get the scsi_cd structure, we have to grab a live reference to the device. For both callbacks, we're not inside an open where we already hold a reference to the device. This fixes device removal/addition under concurrent device access, which otherwise could result in the below oops. NULL pointer dereference at 0000000000000010 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sr 12:0:0:0: [sr2] scsi-1 drive scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl sr 12:0:0:0: Attached scsi CD-ROM sr2 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc sr 12:0:0:0: Attached scsi generic sg7 type 5 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif] CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650 Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod] RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292 RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66 RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000 RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000 FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __invalidate_device+0x48/0x60 check_disk_change+0x4c/0x60 sr_block_open+0x16/0xd0 [sr_mod] __blkdev_get+0xb9/0x450 ? iget5_locked+0x1c0/0x1e0 blkdev_get+0x11e/0x320 ? bdget+0x11d/0x150 ? _raw_spin_unlock+0xa/0x20 ? bd_acquire+0xc0/0xc0 do_dentry_open+0x1b0/0x320 ? inode_permission+0x24/0xc0 path_openat+0x4e6/0x1420 ? cpumask_any_but+0x1f/0x40 ? flush_tlb_mm_range+0xa0/0x120 do_filp_open+0x8c/0xf0 ? __seccomp_filter+0x28/0x230 ? _raw_spin_unlock+0xa/0x20 ? __handle_mm_fault+0x7d6/0x9b0 ? list_lru_add+0xa8/0xc0 ? _raw_spin_unlock+0xa/0x20 ? __alloc_fd+0xaf/0x160 ? do_sys_open+0x1a6/0x230 do_sys_open+0x1a6/0x230 do_syscall_64+0x5a/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tom Abraham authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a06ad633 ] Calling swapon() on a zero length swap file on SSD can lead to a divide-by-zero. Although creating such files isn't possible with mkswap and they woud be considered invalid, it would be better for the swapon code to be more robust and handle this condition gracefully (return -EINVAL). Especially since the fix is small and straightforward. To help with wear leveling on SSD, the swapon syscall calculates a random position in the swap file using modulo p->highest_bit, which is set to maxpages - 1 in read_swap_header. If the swap file is zero length, read_swap_header sets maxpages=1 and last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we modulo p->highest_bit in swapon syscall. This can be prevented by having read_swap_header return zero if last_page is zero. Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.comSigned-off-by:
Thomas Abraham <tabraham@suse.com> Reported-by: <Mark.Landis@Teradata.com> Reviewed-by:
-
Danilo Krummrich authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a0b0d1c3 ] proc_sys_link_fill_cache() does not take currently unregistering sysctl tables into account, which might result into a page fault in sysctl_follow_link() - add a check to fix it. This bug has been present since v3.4. Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Acked-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e3e28812 ] The pmd_set_huge() and pud_set_huge() functions are used from the generic ioremap() code to establish large mappings where this is possible. But the generic ioremap() code does not check whether the PMD/PUD entries are already populated with a non-leaf entry, so that any page-table pages these entries point to will be lost. Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a BUG_ON() in vmalloc_sync_one() when PMD entries are synced from swapper_pg_dir to the current page-table. This happens because the PMD entry from swapper_pg_dir was promoted to a huge-page entry while the current PGD still contains the non-leaf entry. Because both entries are present and point to a different page, the BUG_ON() triggers. This was actually triggered with pti-x32 enabled in a KVM virtual machine by the graphics driver. A real and better fix for that would be to improve the page-table handling in the generic ioremap() code. But that is out-of-scope for this patch-set and left for later work. Reported-by:
David H. Gutteridge <dhgutteridge@sympatico.ca> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <llong@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.orgSigned-off-by:
-
Rich Felker authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 96a59899 ] When responding to a debug trap (breakpoint) in userspace, the kernel's trap handler raised SIGTRAP but returned from the trap via a code path that ignored pending signals, resulting in an infinite loop re-executing the trapping instruction. Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Yelena Krivosheev authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e81b5e01 ] In mvneta_port_up() we enable relevant RX and TX port queues by write queues bit map to an appropriate register. q_map must be ZERO in the beginning of this process. Signed-off-by:
Yelena Krivosheev <yelena@marvell.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
-
Toshiaki Makita authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit ae474573 ] In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0e ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Vinayak Menon authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 914b6dff ] A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.orgSigned-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit b85ab56c ] llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by:
Noam Rathaus <noamr@beyondsecurity.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Giuseppe Lippolis authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit d4c4bc11 ] This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
-
Torsten Hilbrich authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit f3d801ba ] This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
-
