- 16 May, 2012 29 commits
-
-
Hauke Mehrtens authored
There is no code doing anything useful in nicpci.c anymore, so remove it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done in bcma by bcma_core_pci_fixcfg(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done by calling bcma_core_pci_extend_L1time() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This function is now unreferenced Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is already done by bcma in bcma_pcicore_serdes_workaround(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done by calling bcma_core_set_clockmode() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done by calling bcma_chipco_gpio_control(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
ai_chipcontrl_epa4331 is not referenced by any method in brcmsmac and the functionality is already in bcma_chipco_bcm4331_ext_pa_lines_ctl in drivers/bcma/driver_chipcommon_pmu.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done by calling bcma_core_pci_irq_ctl() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This is now done by bcma_core_pci_config_fixup() in drivers/bcma/driver_pci.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
The devices I know of are not using a PCIe core with rev <= 10. The BCM4718 uses a PCIe core with revision 14 and the BCM43224 uses a PCIe core with revision 15. This patch removes support for old PCIe core versions, which are not found on devices supported by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
There are no devices which are using bcma and have a PCI bus, just a PCIe bus or something else. bcma does not support PCI devices, so lets also remove PCI support from brcmsmac. All devices currently supported by brcmsmac are PCIe based. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
The lowest chip common version used on bcma based devices is 31 on the bcm4718 and 32 on the bcm4313, bcm43224, and bcm43225, so the support for the old versions could be removed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
bcma now provide this data and brcmsmac should get it from there and not parse it by its self. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
brcmsmac now takes the sprom from bcma and do not uses its own sprom parsing any more. Remove this code as it is not used any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
bcma now provides all sprom attributes needed by brcmsmac and also parses them from the pci sprom ant otp. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This code is based on code from pcie_misc_config_fixup() in brcmsmac. This patch is part of the move of pci specific code from brcmsmac to bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This code is based on code from pcicore_fixcfg() in brcmsmac. This patch is part of the move of pci specific code from brcmsmac to bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This code is based on code from pcie_extendL1timer() in brcmsmac. This patch is part of the move of pci specific code from brcmsmac to bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This patch is based on code from _ai_clkctl_cc() in brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
These newly added attributes are used by brcmsmac. Now bcma should parse all attributes used by brcmsmac out of the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This code is copied from the ssb sprom read code. These attributes are partly used by b43 and brcmsmac and should also be read out on bcma based devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This attribute is now used in b43 driver and should be filled for all sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
The attribute country_code and alpha2 are two different attributes in the sprom. country_code contains some code in an 8 bit coding and alpha2 contains two chars with the country code. The attributes where read out wrongly in the past and country_code is only available on sprom version 1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
When the boardrev with a prefix is not available, try to read it without a prefix. This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This struct contains information about the board, the chip is running on. The struct is filled for PCIe devices and SoCs. This information is used by b43 and will be used by brcmsmac soon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
Now the fetching of board data also uses nvram_read_u16 and not simple_strtoul any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
Previously the rev contained the revision read from the pci config space and was used as board_rev in the wireless drivers. This is wrong the board_rev is only fetched from the sprom accordingly to the open source part of the Broadcom SDK and brcmsmac. This patch removes the rev from the boardinfo structure and uses the board_rev attribute from sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
-
- 15 May, 2012 11 commits
-
-
Bartosz.Markowski@tieto.com authored
Make use of REGAINED_BSS_EVENT and instead of reporting connection loss immediately on each BEACON_LOSE event, try if not regained in reasonable period of time. Signed-off-by: bartosz.markowski <bartosz.markowski@tieto.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Jesper Juhl authored
We currently do this: int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif) ... struct wl12xx_arp_rsp_template *tmpl; struct ieee80211_hdr_3addr *hdr; ... tmpl = (struct wl12xx_arp_rsp_template *)skb_put(skb, sizeof(*tmpl)); memset(tmpl, 0, sizeof(tmpl)); ... hdr = (struct ieee80211_hdr_3addr *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(hdr)); ... I believe we want to set the entire structures to 0 with those memset() calls, not just zero the initial part of them (size of the pointer bytes). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Randy Dunlap authored
wl12xx build fails with many undefined symbol errors when MAC80211 and CFG80211 are not enabled, so make WLCORE and WL12XX depend on MAC80211 (which already depends on CFG80211). Here are a few of the many build errors: drivers/built-in.o: In function `wl1271_register_hw': main.c:(.text+0x4197cd): undefined reference to `ieee80211_register_hw' drivers/built-in.o: In function `wl1271_rx_streaming_timer': main.c:(.text+0x419818): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_flush_deferred_work': main.c:(.text+0x419910): undefined reference to `ieee80211_rx' main.c:(.text+0x419938): undefined reference to `ieee80211_tx_status' drivers/built-in.o: In function `wl12xx_op_channel_switch': main.c:(.text+0x419afc): undefined reference to `ieee80211_chswitch_done' drivers/built-in.o: In function `wl1271_ssid_set': drivers/built-in.o: In function `wl1271_event_process': event.c:(.text+0x41fec4): undefined reference to `ieee80211_sched_scan_stopped' event.c:(.text+0x41ff88): undefined reference to `ieee80211_cqm_rssi_notify' event.c:(.text+0x42000d): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x420048): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x4200b8): undefined reference to `ieee80211_chswitch_done' event.c:(.text+0x4201ae): undefined reference to `ieee80211_find_sta' event.c:(.text+0x4201ba): undefined reference to `ieee80211_report_low_ack' event.c:(.text+0x42021b): undefined reference to `ieee80211_connection_loss' drivers/built-in.o: In function `wl1271_tx_complete_packet': tx.c:(.text+0x4206a6): undefined reference to `ieee80211_get_hdrlen_from_skb' drivers/built-in.o: In function `wl1271_tx_fill_hdr': tx.c:(.text+0x4208ca): undefined reference to `ieee80211_hdrlen' drivers/built-in.o: In function `wl1271_handle_tx_low_watermark': (.text+0x420e25): undefined reference to `ieee80211_wake_queue' drivers/built-in.o: In function `wl12xx_rearm_rx_streaming': (.text+0x420ed9): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_tx_work_locked': (.text+0x421008): undefined reference to `ieee80211_free_txskb' drivers/built-in.o: In function `wl1271_rx_status.clone.2': rx.c:(.text+0x421593): undefined reference to `ieee80211_channel_to_frequency' drivers/built-in.o: In function `wl1271_ps_filter_frames': ps.c:(.text+0x421a41): undefined reference to `ieee80211_tx_status' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Luciano Coelho <coelho@ti.com> Cc: linux-wireless@vger.kernel.org Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Dan Carpenter authored
GFP_DMA isn't supposed to be used by itself. This allocation is allowed to sleep so it should be ORing it with GFP_KERNEL. Also we should check for allocations errors. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Dan Carpenter authored
We should release this lock before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Eyal Shapira authored
Use FW RX data filters to support cfg80211 wowlan wakeup patterns. This enables to wake up the host from suspend following detection of certain configurable patterns within an incoming packet. Up to 5 patterns are supported. Once the host is resumed any configured RX data filter is cleared. A single pattern can match several bytes sequences with different offsets within a packet. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Eyal Shapira authored
More prep work to support wowlan wakeup patterns. Added some wrappers that also keep the current filters state updated in the driver. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Eyal Shapira authored
More prep work for wowlan patterns. Added ACXs to set global RX filter behavior and enable or disable a specific filter. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Eyal Shapira authored
This is prep work for the support of wowlan patterns using the FW data rx filters mechanism. Added an rx filter struct and some util functions required to manipulate it. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Luciano Coelho authored
GFP_DMA should not be used by itself, it still needs GFP_KERNEL or such. Fix two occurrences of allocations with GFP_DMA only. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
-
Eric Lapuyade authored
The NFC core code already does that for them. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-