While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state()
does check for a non-zero return code from xpcs_get_state_c37_sgmii()
and prints that as a message to the kernel log.

However, a non-zero return code from xpcs_read() is translated into
"return false" (i.e. zero as int) and the I/O error is therefore not
printed. Fix that.

Fixes: b97b5331 ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can.

  Still no major regressions, most of the changes are still due to data
  races fixes, plus the usual bunch of drivers fixes.

  Previous releases - regressions:

   - tcp/udp: make early_demux back namespacified.

   - dsa: fix issues with vlan_filtering_is_global

  Previous releases - always broken:

   - ip: fix data-races around ipv4_net_table (round 2, 3 & 4)

   - amt: fix validation and synchronization bugs

   - can: fix detection of mcp251863

   - eth: iavf: fix handling of dummy receive descriptors

   - eth: lan966x: fix issues with MAC table

   - eth: stmmac: dwmac-mediatek: fix clock issue

  Misc:

   - dsa: update documentation"

* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
  net/sched: cls_api: Fix flow action initialization
  tcp: Fix data-races around sysctl_tcp_max_reordering.
  tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
  tcp: Fix a data-race around sysctl_tcp_rfc1337.
  tcp: Fix a data-race around sysctl_tcp_stdurg.
  tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
  tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
  tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
  tcp: Fix data-races around sysctl_tcp_recovery.
  tcp: Fix a data-race around sysctl_tcp_early_retrans.
  tcp: Fix data-races around sysctl knobs related to SYN option.
  udp: Fix a data-race around sysctl_udp_l3mdev_accept.
  ip: Fix data-races around sysctl_ip_prot_sock.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
  ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
  can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
  can: mcp251xfd: fix detection of mcp251863
  Documentation: fix udp_wmem_min in ip-sysctl.rst
  ...

Jann reported a race between munmap() and unmap_mapping_range(), where
unmap_mapping_range() will no-op once unmap_vmas() has unlinked the
VMA; however munmap() will not yet have invalidated the TLBs.

Therefore unmap_mapping_range() will complete while there are still
(stale) TLB entries for the specified range.

Mitigate this by force flushing TLBs for VM_PFNMAP ranges.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.

This much simplifies trying to figure out what they actually do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous patch removed the tlb_flush_end() implementation which
used tlb_flush_range(). This means:

 - csky did double invalidates, a range invalidate per vma and a full
   invalidate at the end

 - csky actually has range invalidates and as such the generic
   tlb_flush implementation is more efficient for it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.

 - MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
   but does *NOT* want to call it for each VMA.

 - MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
   invalidate across multiple VMAs if possible.

With these it is possible to capture the three forms:

  1) empty stubs;
     select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS

  2) start: flush_cache_range(), end: empty;
     select MMU_GATHER_MERGE_VMAS

  3) start: flush_cache_range(), end: flush_tlb_range();
     default

Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.

Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Fixes: cfc1d277 ("module: Move all into module/")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.

It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)

Fixes: 353f7988 ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>

When the pipe is closed, we mark the associated watchqueue defunct by
calling watch_queue_clear().  However, while that is protected by the
watchqueue lock, new watchqueue entries aren't actually added under that
lock at all: they use the pipe->rd_wait.lock instead, and looking up
that pipe happens without any locking.

The watchqueue code uses the RCU read-side section to make sure that the
wqueue entry itself hasn't disappeared, but that does not protect the
pipe_info in any way.

So make sure to actually hold the wqueue lock when posting watch events,
properly serializing against the pipe being torn down.
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The lockdown LSM is primarily used in conjunction with UEFI Secure Boot.
This LSM may also be used on machines without UEFI.  It can also be
enabled when UEFI Secure Boot is disabled.  One of lockdown's features
is to prevent kexec from loading untrusted kernels.  Lockdown can be
enabled through a bootparam or after the kernel has booted through
securityfs.

If IMA appraisal is used with the "ima_appraise=log" boot param,
lockdown can be defeated with kexec on any machine when Secure Boot is
disabled or unavailable.  IMA prevents setting "ima_appraise=log" from
the boot param when Secure Boot is enabled, but this does not cover
cases where lockdown is used without Secure Boot.

To defeat lockdown, boot without Secure Boot and add ima_appraise=log to
the kernel command line; then:

  $ echo "integrity" > /sys/kernel/security/lockdown
  $ echo "appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig" > \
    /sys/kernel/security/ima/policy
  $ kexec -ls unsigned-kernel

Add a call to verify ima appraisal is set to "enforce" whenever lockdown
is enabled.  This fixes CVE-2022-21505.

Cc: stable@vger.kernel.org
Fixes: 29d3c1c8 ("kexec: Allow kexec_file() with appropriate IMA policy when locked down")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'linux-can-fixes-for-5.19-20220720' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is a pull request of 2 patches for net/master.

The first patch is by me and fixes the detection of the mcp251863 in
the mcp251xfd driver.

The last patch is by Liang He and adds a missing of_node_put() in the
rcar_canfd driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit 747c1430 ("ip: fix dflt addr
selection for connected nexthop").

Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().

Cc: stable@vger.kernel.org
Fixes: 747c1430 ("ip: fix dflt addr selection for connected nexthop")
Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit refactored the flow action initialization sequence to
use an interface method when translating tc action instances to flow
offload objects. The refactored version skips the initialization of the
generic flow action attributes for tc actions, such as pedit, that allocate
more than one offload entry. This can cause potential issues for drivers
mapping flow action ids.

Populate the generic flow action fields for all the flow action entries.

Fixes: c54e1d92 ("flow_offload: add ops to tc_action_ops for flow action setup")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>

----
v1 -> v2:
 - coalese the generic flow action fields initialization to a single loop
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
sysctl: Fix data-races around ipv4_net_table (Round 4).

This series fixes data-races around 17 knobs after fib_multipath_use_neigh
in ipv4_net_table.

tcp_fack was skipped because it's obsolete and there's no readers.

So, round 5 will start with tcp_dsack, 2 rounds left for 27 knobs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_max_reordering, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: dca145ff ("tcp: allow for bigger reordering level")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_abort_on_overflow, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_rfc1337, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_stdurg, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_retrans_collapse, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_slow_start_after_idle, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 35089bb2 ("[TCP]: Add tcp_slow_start_after_idle sysctl.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_thin_linear_timeouts, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 36e31b0a ("net: TCP thin linear timeouts")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_recovery, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 4f41b1c5 ("tcp: use RACK to detect losses")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tcp_early_retrans, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: eed530b6 ("tcp: early retransmit")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading these knobs, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.

  - tcp_sack
  - tcp_window_scaling
  - tcp_timestamps

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_udp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 63a6fff3 ("net: Avoid receiving packets with an l3mdev on unbound UDP sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysctl_ip_prot_sock is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

Fixes: 4548b683 ("Introduce a sysctl that modifies the value of PROT_SOCK.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_fib_multipath_hash_fields, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: ce5c9c20 ("ipv4: Add a sysctl to control multipath hash fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_fib_multipath_hash_policy, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: bf4e0a3d ("net: ipv4: add support for ECMP hash policy choice")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_fib_multipath_use_neigh, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: a6db4494 ("net: ipv4: Consider failed nexthops in multipath routes")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-07-20

1) Fix a policy refcount imbalance in xfrm_bundle_lookup.
   From Hangyu Hua.

2) Fix some clang -Wformat warnings.
   Justin Stitt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We should use of_node_put() for the reference returned by
of_get_child_by_name() which has increased the refcount.

Fixes: 45721c40 ("can: rcar_canfd: Add support for r8a779a0 SoC")
Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.comSigned-off-by: Liang He <windhl@126.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In commit c6f2a617 ("can: mcp251xfd: add support for mcp251863")
support for the mcp251863 was added. However it was not taken into
account that the auto detection of the chip model cannot distinguish
between mcp2518fd and mcp251863 and would lead to a warning message if
the firmware specifies a mcp251863.

Fix auto detection: If a mcp2518fd compatible chip is found, keep the
mcp251863 if specified by firmware, use mcp2518fd instead.

Link: https://lore.kernel.org/all/20220706064835.1848864-1-mkl@pengutronix.de
Fixes: c6f2a617 ("can: mcp251xfd: add support for mcp251863")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-07-18

This series contains updates to iavf driver only.

Przemyslaw fixes handling of multiple VLAN requests to account for
individual errors instead of rejecting them all. He removes incorrect
implementations of ETHTOOL_COALESCE_MAX_FRAMES and
ETHTOOL_COALESCE_MAX_FRAMES_IRQ.

He also corrects an issue with NULL pointer caused by improper handling of
dummy receive descriptors. Finally, he corrects debug prints reporting an
unknown state.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix missing state logs
  iavf: Fix handling of dummy receive descriptors
  iavf: Disallow changing rx/tx-frames and rx/tx-frames-irq
  iavf: Fix VLAN_V2 addition/rejection
====================

Link: https://lore.kernel.org/r/20220718174807.4113582-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

UDP doesn't support tx memory accounting, and sysctl udp_wmem_min
is not really used anywhere. So we should fix the description in
ip-sysctl.rst accordingly.

Fixes: 95766fff ("[UDP]: Add memory accounting.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/c880a963d9b1fb5f442ae3c9e4dfa70d45296a16.1658167019.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

odev pointer can be NULL in mtk_flow_offload_replace routine according
to the flower action rules. Fix possible NULL pointer dereference in
mtk_flow_get_wdma_info.

Fixes: a333215e ("net: ethernet: mtk_eth_soc: implement flow offloading to WED devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4e1685bc4976e21e364055f6bee86261f8f9ee93.1658137753.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes that the platform is waked by an unexpected packet. The
size and range of FIFO is different when the device enters S3 state,
so it is necessary to correct some settings when suspending.

Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT.
Besides, enable MCU_BORW_EN to update the method of calculating the
pointer of data. Then, the hardware could get the correct data.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Taehee Yoo says:

====================
amt: fix validation and synchronization bugs

There are some synchronization issues in the amt module.
Especially, an amt gateway doesn't well synchronize its own variables
and status(amt->status).
It tries to use a workqueue for handles in a single thread.
A global lock is also good, but it would occur complex locking complex.

In this patchset, only the gateway uses workqueue.
The reason why only gateway interface uses workqueue is that gateway
should manage its own states and variables a little bit statefully.
But relay doesn't need to manage tunnels statefully, stateless is okay.
So, relay side message handlers are okay to be called concurrently.
But it doesn't mean that no lock is needed.

Only amt multicast data message type will not be processed by the work
queue because It contains actual multicast data.
So, it should be processed immediately.

When any amt gateway events are triggered(sending discovery message by
delayed_work, sending request message by delayed_work and receiving
messages), it stores event and skb into the event queue(amt->events[16]).
Then, workqueue processes these events one by one.

The first patch is to use the work queue.

The second patch is to remove unnecessary lock due to a previous patch.

The third patch is to use READ_ONCE() in the amt module.
Even if the amt module uses a single thread, some variables (ready4,
ready6, amt->status) can be accessed concurrently.

The fourth patch is to add missing nonce generation logic when it sends a
new request message.

The fifth patch is to drop unexpected advertisement messages.
advertisement message should be received only after the gateway sends
a discovery message first.
So, the gateway should drop advertisement messages if it has never
sent a discovery message and it also should drop duplicate advertisement
messages.
Using nonce is good to distinguish whether a received message is an
expected message or not.

The sixth patch is to drop unexpected query messages.
This is the same behavior as the fourth patch.
Query messages should be received only after the gateway sends a request
message first.
The nonce variable is used to distinguish whether it is a reply to a
previous request message or not.
amt->ready4 and amt->ready6 are used to distinguish duplicate messages.

The seventh patch is to drop unexpected multicast data.
AMT gateway should not receive multicast data message type before
establish between gateway and relay.
In order to drop unexpected multicast data messages, it checks amt->status.

The last patch is to fix a locking problem on the relay side.
amt->nr_tunnels variable is protected by amt->lock.
But amt_request_handler() doesn't protect this variable.

v2:
 - Use local_bh_disable() instead of rcu_read_lock_bh() in
   amt_membership_query_handler.
 - Fix using uninitialized variables.
 - Fix unexpectedly start the event_wq after stopping.
 - Fix possible deadlock in amt_event_work().
 - Add a limit variable in amt_event_work() to prevent infinite working.
 - Rename amt_queue_events() to amt_queue_event().
====================

Link: https://lore.kernel.org/r/20220717160910.19156-1-ap420073@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.

Fixes: cbc21dc1 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.

Fixes: cbc21dc1 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.

Fixes: cbc21dc1 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>