Conventionally, wake-up events for a specific device, in our case the
lid device, are managed via the ACPI _PRW field. While this does not
seem strictly necessary based on ACPI spec, the kernel disables GPE
wakeups to avoid non-wakeup interrupts preventing suspend by default and
only enables GPEs associated via the _PRW field with a wake-up capable
device. This behavior has been introduced in commit f941d3e4 ("ACPI:
EC / PM: Disable non-wakeup GPEs for suspend-to-idle") and is described
in more detail in its commit message.

Unfortunately, on MS Surface devices, there is no _PRW field present on
the lid device, thus no GPE is associated with it, and therefore the GPE
responsible for sending the status-change notification to the lid gets
disabled during suspend, making it impossible to wake the device via the
lid.

This patch introduces a pseudo-device and respective driver which, based
on some DMI matching, marks the corresponding GPE of the lid device for
wake and enables it during suspend. The behavior of this driver models
the behavior of the ACPI/PM core for normal wakeup GPEs, properly
declared via the _PRW field.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201028105427.1593764-1-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Immutable branch between MFD and x86 due for the v5.11 merge window

Add support for the Intel Platform Monitoring Technology crashlog
interface. This interface provides a few sysfs values to allow for
controlling the crashlog telemetry interface as well as a character
driver to allow for mapping the crashlog memory region so that it can be
accessed after a crashlog has been recorded.

This driver is meant to only support the server version of the crashlog
which is identified as crash_type 1 with a version of zero. Currently no
other types are supported.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

PMT Telemetry is a capability of the Intel Platform Monitoring Technology.
The Telemetry capability provides access to device telemetry metrics that
provide hardware performance data to users from read-only register spaces.

With this driver present the intel_pmt directory can be populated with
telem<x> devices. These devices will contain the standard intel_pmt sysfs
data and a "telem" binary sysfs attribute which can be used to access the
telemetry data.

Also create a PCI device id list for early telemetry hardware that require
workarounds for known issues.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Intel Platform Monitoring Technology is meant to provide a common way to
access telemetry and system metrics.

Register mappings are not provided by the driver. Instead, a GUID is read
from a header for each endpoint. The GUID identifies the device and is to
be used with an XML, provided by the vendor, to discover the available set
of metrics and their register mapping.  This allows firmware updates to
modify the register space without needing to update the driver every time
with new mappings. Firmware writes a new GUID in this case to specify the
new mapping.  Software tools with access to the associated XML file can
then interpret the changes.

The module manages access to all Intel PMT endpoints on a system,
independent of the device exporting them. It creates an intel_pmt class
to manage the devices. For each telemetry endpoint, sysfs files provide
GUID and size information as well as a pointer to the parent device the
telemetry came from. Software may discover the association between
endpoints and devices by iterating through the list in sysfs, or by looking
for the existence of the class folder under the device of interest.  A
binary sysfs attribute of the same name allows software to then read or map
the telemetry space for direct access.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Intel Platform Monitoring Technology (PMT) is an architecture for
enumerating and accessing hardware monitoring facilities. PMT supports
multiple types of monitoring capabilities. This driver creates platform
devices for each type so that they may be managed by capability specific
drivers (to be introduced). Capabilities are discovered using PCIe DVSEC
ids. Support is included for the 3 current capability types, Telemetry,
Watcher, and Crashlog. The features are available on new Intel platforms
starting from Tiger Lake for which support is added. This patch adds
support for Tiger Lake (TGL), Alder Lake (ADL), and Out-of-Band Management
Services Module (OOBMSM).

Also add a quirk mechanism for several early hardware differences and bugs.
For Tiger Lake and Alder Lake, do not support Watcher and Crashlog
capabilities since they will not be compatible with future product. Also,
fix use a quirk to fix the discovery table offset.
Co-developed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add PCIe Designated Vendor-Specific Extended Capability (DVSEC) and defines
for the header offsets. Defined in PCIe r5.0, sec 7.9.6.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Fix the following sparse warnings:

./passobj-attributes.c:38:23: warning: symbol 'po_is_pass_set' was not declared. Should it be static?
./passobj-attributes.c:70:23: warning: symbol 'po_current_password' was not declared. Should it be static?
./passobj-attributes.c:99:23: warning: symbol 'po_new_password' was not declared. Should it be static?
./passobj-attributes.c:103:23: warning: symbol 'po_min_pass_length' was not declared. Should it be static?
./passobj-attributes.c:107:23: warning: symbol 'po_max_pass_length' was not declared. Should it be static?
./passobj-attributes.c:116:23: warning: symbol 'po_mechanism' was not declared. Should it be static?
./passobj-attributes.c:129:23: warning: symbol 'po_role' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1604107922-14950-1-git-send-email-zou_wei@huawei.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix the following sparse warning:

drivers/platform/x86/dell-wmi-sysman/sysman.c:258:24: warning:
symbol 'wmi_sysman_kobj_sysfs_ops' was not declared.
Should it be static?

wmi_sysman_kobj_sysfs_ops has only call within sysman.c
It should be static
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1603971581-64135-1-git-send-email-zou_wei@huawei.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Commit e8a60aa7 ("platform/x86: Introduce support for Systems
Management Driver over WMI for Dell Systems") added a new section
DELL WMI SYSMAN DRIVERS in MAINTAINERS, but slipped in a typo.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches    F:    drivers/platform/x86/dell-wmi-syman/*

Point the file entry to the right location and add an entry for its
Documentation while at it.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Divya Bharathi <divya.bharathi@dell.com>
Link: https://lore.kernel.org/r/20201029114425.22520-1-lukas.bulwahn@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The Description: tag is missing on some places, causing
scripts/get_abi.pl warnings:

	Warning: file Documentation/ABI/testing/sysfs-class-firmware-attributes#172:
		What '/sys/class/firmware-attributes/*/authentication/' doesn't have a description

Also, some warnings are produced when generating html documentation:

	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Title underline too short.

	Dell specific class extensions
	--------------------------
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Block quote ends without a blank line; unexpected unindent.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Block quote ends without a blank line; unexpected unindent.
	.../Documentation/ABI/testing/sysfs-class-firmware-attributes:111: WARNING: Inline emphasis start-string without end-string.

Address the warnings, making it to produce the expected
output for the documentation ABI.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/44b4181b4f772fcc5ec676e72b295c10df35121b.1603963862.git.mchehab+huawei@kernel.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add support for SW_TABLET_MODE on the Acer Switch 10 (SW5-012) and the
acer Switch 10 (S1003) models.

There is no way to detect if this is supported, so this uses DMI based
quirks setting force_caps to ACER_CAP_KBD_DOCK (these devices have no
other acer-wmi based functionality).

The new SW_TABLET_MODE functionality can be tested on devices which
are not in the DMI table by passing acer_wmi.force_caps=0x40 on the
kernel commandline.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-6-hdegoede@redhat.com

Not all devices supporting WMID_GUID3 support the wmid3_set_function_mode()
call, leading to errors like these:

[   60.138358] acer_wmi: Enabling RF Button failed: 0x1 - 0xff
[   60.140036] acer_wmi: Enabling Launch Manager failed: 0x1 - 0xff

Add an ACER_CAP_SET_FUNCTION_MODE capability flag, so that these calls
can be disabled through the new force_caps mechanism.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-5-hdegoede@redhat.com

Add a new force_caps module parameter to allow overriding the drivers
builtin capability detection mechanism.

This can be used to for example:
-Disable rfkill functionality on devices where there is an AA OEM DMI
 record advertising non functional rfkill switches
-Force loading of the driver on devices with a missing AA OEM DMI record

Note that force_caps is -1 when unset, this allows forcing the
capability field to 0, which results in acer-wmi only providing WMI
hotkey handling while disabling all other (led, rfkill, backlight)
functionality.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-4-hdegoede@redhat.com

Cleanup accelerometer device handling:
-Drop acer_wmi_accel_destroy instead directly call input_unregister_device.
-The information tracked by the CAP_ACCEL flag mirrors acer_wmi_accel_dev
 being NULL. Drop the CAP flag, this is a preparation change for allowing
 users to override the capability flags. Dropping the flag stops users
 from causing a NULL pointer dereference by forcing the capability.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-3-hdegoede@redhat.com

Cleanup the ACER_CAP_FOO defines:
-Switch to using BIT() macro.
-The ACER_CAP_RFBTN flag is set, but it is never checked anywhere, drop it.
-Drop the unused ACER_CAP_ANY define.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-2-hdegoede@redhat.com

set_quirks has a "if (!interface) return;" check at its beginning and
interface always is NULL when set_quirks is called from find_quirks,
so it is a no-op and we can drop it.

This also allows dropping the "if (!interface) return;" from set_quirks
since set_quirks now always is called with interface != NULL.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201019185628.264473-1-hdegoede@redhat.com

The UX360CA has a WMI device id 0x00060062, which reports whether the
lid is flipped in tablet mode (1) or in normal laptop mode (0).

Add a quirk (quirk_asus_use_lid_flip_devid) for devices on which this
WMI device should be used to figure out the SW_TABLET_MODE state, as
opposed to the quirk_asus_use_kbd_dock_devid.

Additionally, the device needs to be queried on resume and restore
because the firmware does not generate an event if the laptop is put to
sleep while in tablet mode, flipped to normal mode, and later awoken.

It is assumed other UX360* models have the same WMI device. As such, the
quirk is applied to devices with DMI_MATCH(DMI_PRODUCT_NAME, "UX360").
More devices with this feature need to be tested and added accordingly.

The reason for using an allowlist via the quirk mechanism is that the new
WMI device (0x00060062) is also present on some models which do not have
a 360 degree hinge (at least FX503VD and GL503VD from Hans' DSTS
collection) and therefore its presence cannot be relied on.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201020220944.1075530-1-samuel@cavoj.netReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

A break is not needed if it is preceded by a return
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019133212.12671-1-trix@redhat.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add touchscreen info for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com

The performance modules in BlueField are present in several hardware
blocks and each block provides access to these stats either through
counters that can be programmed to monitor supported events or
through memory-mapped registers that hold the relevant information.
The hardware blocks that include a performance module are:
 * Tile (block containing 2 cores and a shared L2 cache)
 * TRIO (PCIe root complex)
 * MSS (Memory Sub-system containing the Memory Controller and L3 cache)
 * GIC (Interrupt controller)
 * SMMU (System Memory Management Unit)
The mlx_pmc driver provides access to all of these performance modules
through a hwmon sysfs interface.

v2 --> v3
Update copyright info.

v1 --> v2
Remove unused headers.
Add comma to arrays where last line is not a termination.
Use kstrtoint in place of sscanf.
UUID manipulation follows drivers/platform/mellanox/mlxbf-bootctl.c
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/4e19a1e5bf4197ad27fc57981fd280eaebd23577.1602160468.git.shravankr@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The Dell WMI Systems Management Driver provides a sysfs
interface for systems management to enable BIOS configuration
capability on certain Dell Systems.

This driver allows user to configure Dell systems with a
uniform common interface. To facilitate this, the patch
introduces a generic way for driver to be able to create
configurable BIOS Attributes available in Setup (F2) screen.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: mark gross <mgross@linux.intel.com>
Co-developed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Co-developed-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Link: https://lore.kernel.org/r/20201027134944.316730-1-divya.bharathi@dell.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

This reverts commit 7b11e898.

Consider the following hardware setting.

|-PNP0C14:00
|  |-- device #1
|-PNP0C14:01
|  |-- device #2

When unloading wmi driver module, device #2 will be first unregistered.
But device_destroy() using MKDEV(0, 0) will locate PNP0C14:00 first
and unregister it. This is incorrect. Should use device_unregister() to
unregister the real parent device.
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Link: https://lore.kernel.org/r/20191115052710.46880-1-yongxin.liu@windriver.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Move the Surface Pro 3 Button driver from platform/x86 to the newly
created platform/surface directory.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20201009141128.683254-6-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Move the Surface 3 Power operation region driver from platform/x86 to
the newly created platform/surface directory.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201009141128.683254-5-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Move the Surface 3 Button driver from platform/x86 to the newly created
platform/surface directory.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201009141128.683254-4-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Move the Surface 3 WMI driver from platform/x86 to the newly created
platform/surface directory.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201009141128.683254-3-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

It may make sense to split the Microsoft Surface hardware platform
drivers out to a separate subdirectory, since some of it may be shared
between ARM and x86 in the future (regarding devices like the Surface
Pro X).

Further, newer Surface devices will require additional platform drivers
for fundamental support (mostly regarding their embedded controller),
which may also warrant this split from a size perspective.

This commit introduces a new platform/surface subdirectory for the
Surface device family, with subsequent commits moving existing Surface
drivers over from platform/x86.

A new MAINTAINERS entry is added for this directory. Patches to files in
this directory will be taken up by the platform-drivers-x86 team (i.e.
Hans de Goede and Mark Gross) after they have been reviewed by
Maximilian Luz.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201009141128.683254-2-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 453431a5 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.

If GIT_DIR is unset, keep using the current ".git" default.

Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:
 "A time namespace fix and a matching selftest. The futex absolute
  timeouts which are based on CLOCK_MONOTONIC require time namespace
  corrected. This was missed in the original time namesapce support"

* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/timens: Add a test for futex()
  futex: Adjust absolute futex timeouts with per time namespace offset

Pull scheduler fixes from Thomas Gleixner:
 "Two scheduler fixes:

   - A trivial build fix for sched_feat() to compile correctly with
     CONFIG_JUMP_LABEL=n

   - Replace a zero lenght array with a flexible array"

* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/features: Fix !CONFIG_JUMP_LABEL case
  sched: Replace zero-length array with flexible-array

Pull perf fix from Thomas Gleixner:
 "A single fix to compute the field offset of the SNOOPX bit in the data
  source bitmask of perf events correctly"

* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: correct SNOOPX field offset

Pull locking fix from Thomas Gleixner:
 "Just a trivial fix for kernel-doc warnings"

* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/seqlocks: Fix kernel-doc warnings

Pull NTB fixes from Jon Mason.

* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
  NTB: Use struct_size() helper in devm_kzalloc()
  ntb: intel: Fix memleak in intel_ntb_pci_probe
  NTB: hw: amd: fix an issue about leak system resources

Pull i2c fix from Wolfram Sang:
 "Regression fix for rc1 and stable kernels as well"

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Pull more cifs updates from Steve French:
 "Add support for stat of various special file types (WSL reparse points
  for char, block, fifo)"

* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  smb3: add some missing definitions from MS-FSCC
  smb3: remove two unused variables
  smb3: add support for stat of WSL reparse points for special file types