- 07 Jun, 2021 16 commits
-
-
Yu Kuai authored
Add description for parameters of htb_next_rb_node() to fix gcc W=1 warnings: net/sched/sch_htb.c:339: warning: Function parameter or member 'n' not described in 'htb_next_rb_node' Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yu Kuai authored
Add description for parameters of htb_add_to_wait_tree() to fix gcc W=1 warnings: net/sched/sch_htb.c:308: warning: Function parameter or member 'q' not described in 'htb_add_to_wait_tree' net/sched/sch_htb.c:308: warning: Function parameter or member 'cl' not described in 'htb_add_to_wait_tree' net/sched/sch_htb.c:308: warning: Function parameter or member 'delay' not described in 'htb_add_to_wait_tree' Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: hd64570: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Add space required before the open parenthesis '('. Add space required after that close brace '}'. Signed-off-by:Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
Remove redundant parentheses around 'cda >= desc_off'. Signed-off-by:
-
Peng Li authored
Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. Signed-off-by:
-
Peng Li authored
Braces {} should be used on all arms of this statement. Signed-off-by: -
Peng Li authored
Trailing statements should be on next line. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Convert NXP SJA1105 DSA driver to YAML This is an attempt to convert the SJA1105 driver to the YAML schema. The SJA1105 driver has some custom device tree properties which caused validation problems in the previous attempt: https://patchwork.kernel.org/project/netdevbpf/patch/20210531234735.1582031-1-olteanv@gmail.com/ So now we are removing them, hoping that this will make the conversion easier to accept. In order to do that, we introduce a new PHY interface type, "reverse RMII", which is like "reverse MII" (aka MII as a PHY) but for the reduced data width version of the protocol. This is a direct replacement for an rmii fixed-link. Now, rmii fixed-link interfaces behave as a MAC, and rev-rmii fixed-link interfaces behave as a PHY. ==================== Signed-off-by:
-
Vladimir Oltean authored
Since the sja1105 driver no longer has any custom device tree properties, the conversion is trivial. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Now that both RevMII as well as RevRMII exist, we can deprecate the sja1105,role-mac and sja1105,role-phy properties and simply let the user select that a port operates in MII PHY role by using phy-mode = "rev-mii"; or in RMII PHY role by using phy-mode = "rev-rmii"; There are no fixed-link MII or RMII properties in mainline device trees, and the setup itself is fairly uncommon, so there shouldn't be risks of breaking compatibility. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The sja1105 driver has an intermediate way of determining whether the RGMII delays should be applied by the PHY or by itself: by looking at the port role (PHY or MAC). The port can be put in the PHY role either explicitly (sja1105,role-phy) or implicitly (fixed-link). We want to deprecate the sja1105,role-phy property, so all that remains is the fixed-link property. Introduce a "fixed_link" array of booleans in the driver, and use that to determine whether RGMII delays must be applied or not. Signed-off-by:
-
Vladimir Oltean authored
The "reverse RMII" protocol name is a personal invention, derived from "reverse MII". Just like MII, RMII is an asymmetric protocol in that a PHY behaves differently than a MAC. In the case of RMII, for example: - the 50 MHz clock signals are either driven by the MAC or by an external oscillator (but never by the PHY). - the PHY can transmit extra in-band control symbols via RXD[1:0] which the MAC is supposed to understand, but a PHY isn't. The "reverse MII" protocol is not standardized either, except for this web document: https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/# In short, it means that the Ethernet controller speaks the 4-bit data parallel protocol from the perspective of a PHY (it acts like a PHY). This might mean that it implements clause 22 compatible registers, although that is optional - the important bit is that its pins can be connected to an MII MAC and it will 'just work'. In this discussion thread: https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/ we agreed that it would be an abuse of terms to use the "RevMII" name for anything than the 4-bit parallel MII protocol. But since all the same concepts can be applied to the 2-bit Reduced MII protocol as well, here we are introducing a "Reverse RMII" protocol. This means: "behave like an RMII PHY". Signed-off-by:
-
- 04 Jun, 2021 24 commits
-
-
George McCollister authored
Add an inbound policy filter which matches the HSR/PRP supervision MAC range and forwards to the CPU port without discarding duplicates. This is required to correctly populate time_in[A] and time_in[B] in the HSR/PRP node_table. Leave the policy disabled by default and enable/disable it when joining/leaving hsr. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Íñigo Huguet authored
In my last changes in commit 5e0b8928 I introduced a copy-paste bug, leading to cancel twice qresume_task work for OFLD queue, and never the one for CTRL queue. This patch cancels correctly both works. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Horatiu Vultur authored
According to the standard IEC 62439-2, the number of transitions needs to be counted for each transition 'between' ring state open and ring state closed and not from open state to closed state. Therefore fix this for both ring and interconnect ring. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Michael Walle authored
The supplied buffer for the MAC address might not be aligned. Thus doing a 32bit (or 16bit) access could be on an unaligned address. For now, enetc is only used on aarch64 which can do unaligned accesses, thus there is no error. In any case, be correct and use the get/put_unaligned helpers. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: hdlc_x25: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, else should follow close brace '}'. Signed-off-by:
-
Peng Li authored
Add spaces required around that '='. Add space required after that ','. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-06-04 This series contains updates to igc driver only. Sasha utilizes the newly introduced ethtool_sprintf() function, removes unused defines, and fixes indentation. Muhammad adds support for hardware VLAN insertion and stripping. ==================== Signed-off-by: -
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Add timestamp support Enable the SO_TIMESTAMP and SO_TIMESTAMPING socket options for MPTCP sockets and add receive path cmsg support for timestamps. Patches 1, 2, and 5 expose existing sock and tcp helpers for timestamps (no new EXPORT_SYMBOLS()s). Patch 3 propagates timestamp options to subflows. Patch 4 cleans up MPTCP handling of SOL_SOCKET options. Patch 6 adds timestamp csmg data when receiving on sockets that have been configured for timestamps. Patch 7 adds self test coverage for timestamps. ==================== Signed-off-by: -
Florian Westphal authored
This extends the existing setsockopt test case to also check for cmsg timestamps. mptcp_connect will abort/fail if the setockopt was passed but the timestamp cmsg isn't present after successful recvmsg(). Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
This adds support for SO_TIMESTAMP(NS). Timestamps are passed to userspace in the same way as for plain tcp sockets. Acked-by:
-
Florian Westphal authored
MPTCP is builtin, so no need to add EXPORT_SYMBOL()s. It will be used to support SO_TIMESTAMP(NS) ancillary messages in the mptcp receive path. Acked-by:
-
Florian Westphal authored
Move the pre-check to the function that handles all SOL_SOCKET values. At this point there is complete coverage for all values that were accepted by the pre-check. BUSYPOLL functions are accepted but will not have any functionality yet until its clear how the expected mptcp behaviour should look like. Acked-by:
-
Florian Westphal authored
This adds support for TIMESTAMP(NS) setsockopt. This doesn't make things work yet, because the mptcp receive path doesn't convert the skb timestamps to cmsgs for userspace consumption. receive path cmsg support is added ina followup patch. Acked-by:
-
Florian Westphal authored
Similar to previous patch: expose SO_TIMESTAMPING helper so we do not have to copy & paste this into the mptcp core. Acked-by:
-
Florian Westphal authored
This exports SO_TIMESTAMP_* function for re-use by MPTCP. Without this there is too much copy & paste needed to support this from mptcp setsockopt path. Acked-by:
-
Muhammad Husaini Zulkifli authored
Add HW VLAN acceleration protocol handling. In case of HW VLAN tagging, we need that protocol available in the ndo_start_xmit(), so that it will be stored in a new fields in the skb. HW offloading is set to OFF by default. Users are allow to turn on/off Rx/Tx HW VLAN acceleration via ethtool. Signed-off-by:
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Minor fix of indentation in igc_defines.h Signed-off-by:
-
Sasha Neftin authored
The MDICNFG register from igc registers is not used so remove it. Signed-off-by:
-
