- 01 Aug, 2022 25 commits
-
-
Bjorn Helgaas authored
Move imx6_pcie_enable_ref_clk() earlier so it's not in the middle between imx6_pcie_assert_core_reset() and imx6_pcie_deassert_core_reset(). No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-4-git-send-email-hongxing.zhu@nxp.comSigned-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Richard Zhu <hongxing.zhu@nxp.com>
-
Bjorn Helgaas authored
Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and imx6_setup_phy_mpll() earlier with other PHY-related code. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.comSigned-off-by:
-
Bjorn Helgaas authored
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the file since they depend on nothing and are used by several other functions that will be moved earlier. No functional change intended. Link: https://lore.kernel.org/r/1657783869-19194-2-git-send-email-hongxing.zhu@nxp.comSigned-off-by:
-
Bjorn Helgaas authored
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() with NOIRQ_SYSTEM_SLEEP_PM_OPS(), which has the advantage that the compiler always sees the PM callbacks as referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP" or tagged with "__maybe_unused" to avoid "defined but not used" warnings. See 1a3c7bb0 ("PM: core: Add new *_PM_OPS macros, deprecate old ones"). Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Dmitry Baryshkov authored
On Qualcomm platforms each group of 32 MSI vectors is routed to the separate GIC interrupt. Document mapping of additional interrupts. Link: https://lore.kernel.org/r/20220707134733.2436629-6-dmitry.baryshkov@linaro.orgSigned-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Acked-by:
Stanimir Varbanov <svarbanov@mm-sol.com>
-
Dmitry Baryshkov authored
On some Qualcomm platforms each group of 32 MSI vectors is routed to a separate GIC interrupt. Implement support for such configurations by parsing "msi0" ... "msiX" interrupts and attaching them to the chained handler. Note that if DT doesn't list an array of MSI interrupts and uses a single "msi" IRQ, the driver will limit the number of supported MSI vectors to 32. Link: https://lore.kernel.org/r/20220707134733.2436629-5-dmitry.baryshkov@linaro.orgSigned-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
Dmitry Baryshkov authored
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but they are routed to separate interrupts in groups of 32 vectors. To support this configuration, change the msi_irq field to an array. Let the DWC core handle all interrupts that were set in this array. [bhelgaas: reorder, drop "irq" temporary to make patch cleaner] Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Split handling of MSI host IRQs to a separate dw_pcie_msi_host_init() function. The code is complex enough to warrant a separate function. [bhelgaas: reorder patch earlier] Link: https://lore.kernel.org/r/20220707134733.2436629-4-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
The dwc-based drivers set pp->msi_irq to -ENODEV if they do not want the dwc core to do anything with pp->msi_irq. dw_pcie_host_init() sets the handler and data when "pp->msi_irq > 0", so use the same condition when removing the handler and data in dw_pcie_free_msi(). Link: https://lore.kernel.org/r/20220707134733.2436629-2-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Christophe JAILLET authored
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Link: https://lore.kernel.org/r/bc6586a603abc0db7d4531308b698fbe7a6d7083.1657375829.git.christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Will McVicker authored
As of 07940c36 ("PCI: dwc: Fix MSI page leakage in suspend/resume"), the PCIe designware host driver has been using the driver data allocation for the msi_msg DMA mapping which can result in a DMA_MAPPING_ERROR due to the DMA overflow check in dma_direct_map_page() when the address is greater than 32 bits (reported in [1]). The commit was trying to address a memory leak on suspend/resume by moving the MSI mapping to dw_pcie_host_init(), but subsequently dropped the page allocation thinking it wasn't needed. To fix the DMA mapping issue as well as make msi_msg DMA'able, switch back to allocating a 32-bit page for the msi_msg. To avoid the suspend/resume leak, allocate the page in dw_pcie_host_init() since that shouldn't be called during suspend/resume. [1] https://lore.kernel.org/all/Yo0soniFborDl7+C@google.com/Signed-off-by:
Will McVicker <willmcvicker@google.com> Signed-off-by:
-
Serge Semin authored
Make the DWC PCIe RC/EP safer and more verbose for invalid or failed inbound and outbound iATU window setups. Silently ignoring iATU regions setup errors may cause unpredictable errors. For instance if a cfg or IO window fails to be activated, then any CFG/IO requested won't reach target PCIe devices and the corresponding accessors will return platform-specific random values. [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-15-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by:
-
Serge Semin authored
Make __dw_pcie_prog_outbound_atu() check the requested region base and size against what the hardware can support. Return error if the region is not correctly aligned or of a supported size. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-14-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
The DWC PCIe RC/EP/DM IP core configuration parameters determine the number of inbound and outbound iATU windows, alignment requirements (which is also the minimum window size), minimum and maximum sizes. If internal ATU is enabled, the former settings are determined by CX_ATU_MIN_REGION_SIZE; the latter are determined by CX_ATU_MAX_REGION_SIZE. Determine the required alignment and maximum size supported by the controller and log it to help verify whether the requested inbound or outbound memory mappings can be fully created. Note 1. The extended iATU regions have been supported since DWC PCIe v4.60a. There is no need in testing the upper limit register availability for the older cores. Note 2. The regions alignment is determined with using the fls() method since the lower four bits of the ATU Limit register can be occupied with the Circular Buffer Increment setting, which can be initialized with zeros. Link: https://lore.kernel.org/r/20220624143947.8991-13-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Previously __dw_pcie_prog_outbound_atu() duplicated a lot of code between the iatu_unroll_enabled version and the PCIE_ATU_VIEWPORT version: __dw_pcie_prog_outbound_atu if (iatu_unroll_enabled) dw_pcie_prog_outbound_atu_unroll dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_LOWER_BASE, ...) dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_UPPER_BASE, ...) ... return dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) dw_pcie_writel_dbi(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_dbi(PCIE_ATU_UPPER_BASE, ...) ... Unify those by pushing the unroll address computation and viewport selection down into dw_pcie_writel_atu() so we can use the same dw_pcie_writel_atu_ob() accessor for both paths: __dw_pcie_prog_outbound_atu dw_pcie_writel_atu_ob(PCIE_ATU_LOWER_BASE, ...) dw_pcie_writel_atu dw_pcie_select_atu # new if (iatu_unroll_enabled) return pci->atu_base + PCIE_ATU_UNROLL_BASE(...) dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...) return pci->atu_base dw_pcie_write(base + reg) dw_pcie_writel_atu_ob(PCIE_ATU_UPPER_BASE, ...) ... In the non-unroll case, this does involve more MMIO writes to PCIE_ATU_VIEWPORT, but it's mainly in initialization paths and the code simplification is significant. [bhelgaas: commit log, simplify dw_pcie_select_atu()] Link: https://lore.kernel.org/r/20220624143947.8991-12-Sergey.Semin@baikalelectronics.ruSigned-off-by: -
Serge Semin authored
Previously callers of dw_pcie_disable_atu() supplied enum dw_pcie_region_type (DW_PCIE_REGION_INBOUND, DW_PCIE_REGION_OUTBOUND), which dw_pcie_disable_atu() converted to the PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_region_type enum and passing PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB directly. Reorder dw_pcie_disable_atu() arguments to (dir, index) since "index" indicates an ATU window in the regions of the corresponding direction. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-11-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Previously dw_pcie_ep_set_bar() converted the BAR PCI_BASE_ADDRESS_SPACE bit to the internal dw_pcie_as_type enum (DW_PCIE_AS_MEM, DW_PCIE_AS_IO) and passed it down to dw_pcie_prog_inbound_atu(), which converted the enum to the PCIE_ATU_TYPE_MEM/PCIE_ATU_TYPE_IO values needed to program the ATU registers. Simplify the code by dropping the dw_pcie_as_type enum and passing PCIE_ATU_TYPE_MEM or PCIE_ATU_TYPE_IO directly. Reorder inbound ATU function arguments to match the outbound functions, with address-related parameters at the end. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-10-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
dw_pcie_host_init() calls the dw_pcie_ops.host_init() callback to do platform-specific host initialization. Add a dw_pcie_ops.host_deinit() callback to perform the corresponding cleanups in dw_pcie_host_deinit() and in dw_pcie_host_init() failure paths. Link: https://lore.kernel.org/r/20220624143947.8991-9-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Tegra194 only supports v4.90a, so remove the now-superfluous code that sets struct dw_pcie.version. Suggested-by:
-
Serge Semin authored
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Remove the now-superfluous intel-gw code that sets struct dw_pcie.version. Suggested-by:
-
Serge Semin authored
Add macros to compare DWC IP core versions: dw_pcie_ver_is() dw_pcie_ver_is_ge() dw_pcie_ver_type_is() dw_pcie_ver_type_is_ge() These are along the lines of DWC3_VER_IS() and dw_spi_ver_is(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-6-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Since DWC PCIe v4.70a, the controller version and version type can be read from the PORT_LOGIC.PCIE_VERSION_OFF and PORT_LOGIC.PCIE_VERSION_TYPE_OFF registers respectively. Read the version from those registers and warn if if's different from the version we got from the device tree. We can only read the version after platform-specific drivers have done any DBI-related initialization, such as reference clock activation. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-5-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Save the DWC IP core version in the same format as the PORT_LOGIC.PCIE_VERSION_OFF register, similar to what other drivers for DWC IP do (dw_spi_hw_init(), dwc3_core_is_valid(), stmmac_hwif_init()). [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-4-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Previously, dw_pcie_ep_init() did: dw_pcie_iatu_detect(pci); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); if (!res) return -EINVAL; The platform_get_resource_byname() can fail, and dw_pcie_iatu_detect() doesn't depend on the "addr_space" resource, so delay it until afterwards, i.e., platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space"); dw_pcie_iatu_detect(pci); [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143947.8991-3-Sergey.Semin@baikalelectronics.ruSigned-off-by: -
Serge Semin authored
Printing just "link up" isn't very informative for PCI Express. Even if the link is up, bus performance can degrade to slower speeds or to narrower width than both Root Port and its partner is capable of. In that case it would be handy to know the link specifications as early as possible. If the link comes up, log the link speed (PCIe generation) and width. Link: https://lore.kernel.org/r/20220624143947.8991-2-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
- 06 Jul, 2022 15 commits
-
-
Serge Semin authored
The dw_plat_pcie_of_match[] forward declaration was required when dw_plat_pcie_probe() called of_match_device(). 5c204204 ("PCI: designware-plat: Prefer of_device_get_match_data()") replaced that with of_device_get_match_data(), which no longer needs the declaration. Drop the unnecessary forward declaration. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-19-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
1d906b22 ("PCI: dwc: Add support for EP mode") added the struct dw_plat_pcie regmap pointer, but it has never been used. Remove it. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-18-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
Save the return value in "ret" for all three cases (DW_PCIE_RC_TYPE, DW_PCIE_EP_TYPE, default) handled by dw_plat_pcie_probe() and return from a single place. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-17-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
All of the DW PCIe core driver entities except the pcie_port struct have names with the "dw_" prefix to distinguish local and common PCIe name spaces, and endpoint-related entities have an "_ep" suffix. Rename struct pcie_port to dw_pcie_rp to make it more consistent with other names. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Jesper Nilsson <jesper.nilsson@axis.com>
-
Serge Semin authored
The io_cfg_atu_shared flag is set if there is an outbound iATU window used for both config space accesses and IO port transfers. Since the flag semantic is purely Root Port specific, it's not used in either the DW PCIe common code or in the DW PCIe Endpoint driver. Move it to the struct pcie_port and rename to cfg0_io_shared. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-15-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
Factor out this pattern: if (!pci->ops || !pci->ops->start_link) return -EINVAL; return pci->ops->start_link(pci); into a new dw_pcie_start_link() wrapper and do the same for the stop_link() method. Note that dw_pcie_ep_start() previously returned -EINVAL if there was no platform start_link() method, which didn't make much sense since that is not an error. It will now return 0 in that case. As a side-effect, drop the empty start_link() and dummy dw_pcie_ops instances from the generic DW PCIe and Layerscape EP platform drivers. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-14-Sergey.Semin@baikalelectronics.ruSigned-off-by: -
Serge Semin authored
dw_pcie_host_init() has two instances of the resource structure pointers used in unrelated places. It's pointless to have two different local storages for them since the corresponding code is small and having resource-specific names doesn't make it more readable. Convert these parts of the function to use a common pointer to the resource structure instance. Link: https://lore.kernel.org/r/20220624143428.8334-13-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
There are several places in the common DW PCIe code with incoherent local variable usage: a variable is defined and initialized with a structure field, but the structure pointer is dereferenced to access that field anyway; the local variable is defined and initialized but either used just once or not used afterwards in the main part of the subsequent method. It mainly concerns the pcie_port.dev field. Fix that in the relevant places. Link: https://lore.kernel.org/r/20220624143428.8334-12-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
While the rest of the generic DWC PCIe code uses the dedicated IO-mem accessors, the dw_pcie_link_up() method for some unobvious reason directly calls readl() to get PortLogic.DEBUG1 register content. Since the way the DBI bus is accessed can be platform-specific, use dw_pcie_readl_dbi() instead so dw_pcie_link_up() is slightly more generic. Link: https://lore.kernel.org/r/20220624143428.8334-11-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
The unrolled version of the internal ATU has been available since the DWC PCIe v4.80a IP core, but it may not be enabled. Per [1], if unrolled ATU is enabled, the PCIE_ATU_VIEWPORT does not exist and reads as 0xffffffff; while if unrolled ATU is disabled, PCIE_ATU_VIEWPORT will contain some zeros. Simplify dw_pcie_iatu_unroll_enabled() by checking the value of PCIE_ATU_VIEWPORT. [1] DesignWare Cores, PCI Express Controller, Register Desciptions, v.4.90a, December 2016, p.855 [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-10-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
Add newlines to log messages that are missing them. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-9-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
Add braces around single-line if-else statements when the opposite case requires them. Link: https://lore.kernel.org/r/20220624143428.8334-8-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
If the "snps,enable-cdm-check" property exists, we should enable the CDM check. But previously dw_pcie_setup() could exit before doing so if the "num-lanes" property was absent or invalid. Move the CDM enable earlier so we do it regardless of whether "num-lanes" is present. [bhelgaas: commit log] Fixes: 07f123de ("PCI: dwc: Add support to enable CDM register check") Link: https://lore.kernel.org/r/20220624143428.8334-7-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Vidya Sagar <vidyas@nvidia.com> Reviewed-by:
-
Serge Semin authored
If dw_pcie_ep_init() fails to perform any action after the EPC memory is initialized and the MSI memory region is allocated, the latter parts won't be undone thus causing a memory leak. Add a cleanup-on-error path to fix these leaks. [bhelgaas: commit log] Fixes: 2fd0c9d9 ("PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init") Link: https://lore.kernel.org/r/20220624143428.8334-6-Sergey.Semin@baikalelectronics.ruTested-by:
-
Serge Semin authored
We program the 64-bit ATU limit address (in PCIE_ATU_LIMIT/ PCIE_ATU_UPPER_LIMIT or PCIE_ATU_UNR_LOWER_LIMIT/PCIE_ATU_UNR_UPPER_LIMIT), but in addition, the PCIE_ATU_INCREASE_REGION_SIZE bit must be set if the upper 32 bits of the limit address differ from the upper 32 bits of the base address (see [1,2]). 5b4cf0f6 ("PCI: dwc: Add upper limit address for outbound iATU") set PCIE_ATU_INCREASE_REGION_SIZE, but only when the *size* was greater than 4GB. It did not set it when a smaller region crossed a 4GB boundary, e.g., [mem 0x0_f0000000-0x1_0fffffff]. Set PCIE_ATU_INCREASE_REGION_SIZE whenever PCIE_ATU_UPPER_LIMIT is greater than PCIE_ATU_UPPER_BASE. [1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, v5.40a, March 2019, fig.3-36, p.175 [2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, v5.40a, March 2019, fig.3-37, p.176 [bhelgaas: commit log] Fixes: 5b4cf0f6 ("PCI: dwc: Add upper limit address for outbound iATU") Link: https://lore.kernel.org/r/20220624143428.8334-5-Sergey.Semin@baikalelectronics.ruTested-by:
-
