- 15 Aug, 2018 8 commits
-
-
Hans de Goede authored
commit fdcb613d upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c74817 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juergen Gross authored
commit d472b3a6 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
John David Anglin authored
commit fedb8da9 upstream. For years I thought all parisc machines executed loads and stores in order. However, Jeff Law recently indicated on gcc-patches that this is not correct. There are various degrees of out-of-order execution all the way back to the PA7xxx processor series (hit-under-miss). The PA8xxx series has full out-of-order execution for both integer operations, and loads and stores. This is described in the following article: http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml For this reason, we need to define mb() and to insert a memory barrier before the store unlocking spinlocks. This ensures that all memory accesses are complete prior to unlocking. The ldcw instruction performs the same function on entry. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 66509a27 upstream. Enable the -mlong-calls compiler option by default, because otherwise in most cases linking the vmlinux binary fails due to truncations of R_PARISC_PCREL22F relocations. This fixes building the 64-bit defconfig. Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
-
Kees Cook authored
commit e01e8063 upstream. One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ Srivatsa: Backported to 4.4.y ] Signed-off-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Srinidhi Rao <srinidhir@vmware.com> Signed-off-by:
-
Thomas Egerer authored
commit 32b6170c upstream. The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2Signed-off-by:
Thomas Egerer <hakke_007@gmx.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tadeusz Struk authored
commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit 50122847 upstream. Commit 8844618d: "ext4: only look at the bg_flags field if it is valid" will complain if block group zero does not have the EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, since a freshly created file system has this flag cleared. It gets almost immediately after the file system is mounted read-write --- but the following somewhat unlikely sequence will end up triggering a false positive report of a corrupted file system: mkfs.ext4 /dev/vdc mount -o ro /dev/vdc /vdc mount -o remount,rw /dev/vdc Instead, when initializing the inode table for block group zero, test to make sure that itable_unused count is not too large, since that is the case that will result in some or all of the reserved inodes getting cleared. This fixes the failures reported by Eric Whiteney when running generic/230 and generic/231 in the the nojournal test case. Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid") Reported-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
- 09 Aug, 2018 13 commits
-
-
Greg Kroah-Hartman authored
-
Shankara Pailoor authored
commit 92d34134 upstream. The code is assuming the buffer is max_size length, but we weren't allocating enough space for it. Signed-off-by:
Shankara Pailoor <shankarapailoor@gmail.com> Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Esben Haabendal authored
commit 9f9e3e0d upstream. Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by:
Esben Haabendal <eha@deif.com> Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Masami Hiramatsu authored
commit 73c8d894 upstream. Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Cc: stable@vger.kernel.org Fixes: debdd57f ("tracing: Make a snapshot feature available from userspace") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> [ Updated commit log and comment in the code ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit a0040c01 upstream. Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Signed-off-by:
-
Theodore Ts'o authored
commit 44de022c upstream. Ext4_check_descriptors() was getting called before s_gdb_count was initialized. So for file systems w/o the meta_bg feature, allocation bitmaps could overlap the block group descriptors and ext4 wouldn't notice. For file systems with the meta_bg feature enabled, there was a fencepost error which would cause the ext4_check_descriptors() to incorrectly believe that the block allocation bitmap overlaps with the block group descriptor blocks, and it would reject the mount. Fix both of these problems. Signed-off-by:
Benjamin Gilbert <bgilbert@redhat.com> Signed-off-by:
-
Dmitry Safonov authored
commit 91874ecf upstream. It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b237 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
[ Upstream commit 61f4b237 ] On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d42 ("netlink: Do not subscribe to non-existent groups"). Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Dmitry Safonov authored
[ Upstream commit 7acf9d42 ] Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Anna-Maria Gleixner authored
commit 80d20d35 upstream. local_timer_softirq_pending() checks whether the timer softirq is pending with: local_softirq_pending() & TIMER_SOFTIRQ. This is wrong because TIMER_SOFTIRQ is the softirq number and not a bitmask. So the test checks for the wrong bit. Use BIT(TIMER_SOFTIRQ) instead. Fixes: 5d62c183 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()") Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Cc: bigeasy@linutronix.de Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
commit d1f0301b upstream. The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8 ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by:
Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by:
-
Anil Gurumurthy authored
commit b4146c49 upstream. Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: <stable@vger.kernel.org> Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Quinn Tran authored
commit b08abbd9 upstream. During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
- 06 Aug, 2018 19 commits
-
-
Greg Kroah-Hartman authored
-
Tony Battersby authored
commit c170e5a8 upstream. Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acb ("sg: O_EXCL and other lock handling") Cc: <stable@vger.kernel.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Herbert Xu authored
commit 46d8c4b2 upstream. This was detected by the self-test thanks to Ard's chunking patch. I finally got around to testing this out on my ancient Via box. It turns out that the workaround got the assembly wrong and we end up doing count + initial cycles of the loop instead of just count. This obviously causes corruption, either by overwriting the source that is yet to be processed, or writing over the end of the buffer. On CPUs that don't require the workaround only ECB is affected. On Nano CPUs both ECB and CBC are affected. This patch fixes it by doing the subtraction prior to the assembly. Fixes: a76c1c23 ("crypto: padlock-aes - work around Nano CPU...") Cc: <stable@vger.kernel.org> Reported-by:
Jamie Heilman <jamie@audible.transient.net> Signed-off-by:
-
Roman Kagan authored
commit 63aff655 upstream. VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested vmx is turned on with the module parameter. However, it's only freed if the L1 guest has executed VMXON which is not a given. As a result, on a system with nested==on every creation+deletion of an L1 vcpu without running an L2 guest results in leaking one vpid. Since the total number of vpids is limited to 64k, they can eventually get exhausted, preventing L2 from starting. Delay allocation of the L2 vpid until VMXON emulation, thus matching its freeing. Fixes: 5c614b35 Cc: stable@vger.kernel.org Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jiang Biao authored
commit 89da619b upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e2250429 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Huang Chong <huang.chong@zte.com.cn> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jeremy Cline authored
commit c8e8cd57 upstream. 'call' is a user-controlled value, so sanitize the array index after the bounds check to avoid speculating past the bounds of the 'nargs' array. Found with the help of Smatch: net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue 'nargs' [r] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
commit 72c05f32 upstream. ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Linus Torvalds authored
commit 71755ee5 upstream. The squashfs fragment reading code doesn't actually verify that the fragment is inside the fragment table. The end result _is_ verified to be inside the image when actually reading the fragment data, but before that is done, we may end up taking a page fault because the fragment table itself might not even exist. Another report from Anatoly and his endless squashfs image fuzzing. Reported-by:
Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>, Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Linus Torvalds authored
commit d5125847 upstream. Anatoly reports another squashfs fuzzing issue, where the decompression parameters themselves are in a compressed block. This causes squashfs_read_data() to be called in order to read the decompression options before the decompression stream having been set up, making squashfs go sideways. Reported-by:
Phillip Lougher <phillip.lougher@gmail.com> Cc: stable@kernel.org Signed-off-by:
-
Jeremy Cline authored
[ Upstream commit bc5b6c0b ] 'protocol' is a user-controlled value, so sanitize it after the bounds check to avoid using it for speculative out-of-bounds access to arrays indexed by it. This addresses the following accesses detected with the help of smatch: * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_keys' [w] * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_key_strings' [w] * net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre issue 'nl_table' [w] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a94c689e ] If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 24462549 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 56e2c94f ] We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f7 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f7, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 15ecbe94 ] Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea ("tcp: do not aggressively quick ack after ECN events") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Acked-by:
-
Yousuk Seung authored
[ Upstream commit f4c9f85f ] Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 522040ea ] ECN signals currently forces TCP to enter quickack mode for up to 16 (TCP_MAX_QUICKACKS) following incoming packets. We believe this is not needed, and only sending one immediate ack for the current packet should be enough. This should reduce the extra load noticed in DCTCP environments, after congestion events. This is part 2 of our effort to reduce pure ACK packets. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9a9c9b51 ] We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a3893637 ] As explained in commit 9f9843a7 ("tcp: properly handle stretch acks in slow start"), TCP stacks have to consider how many packets are acknowledged in one single ACK, because of GRO, but also because of ACK compression or losses. We plan to add SACK compression in the following patch, we must therefore not call tcp_enter_quickack_mode() Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 9939a46d ] As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Xiao Liang authored
[ Upstream commit 822fb18a ] When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by:
Xiao Liang <xiliang@redhat.com> Signed-off-by:
-
