Add binding description for mediatek,mt8365-systimer
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-8-bero@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.

This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.

On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.

[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_cmt device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.

Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230123220221.48164-1-u.kleine-koenig@pengutronix.deSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230121182911.4e47a5ff@endymion.delvareSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

RISC-V provides an architectural clock source via the time CSR. This
clock source exposes a 64-bit counter synchronized across all CPUs.
Because it is accessed using a CSR, it is much more efficient to read
than MMIO clock sources. For example, on the Allwinner D1, reading the
sun4i timer in a loop takes 131 cycles/iteration, while reading the
RISC-V time CSR takes only 5 cycles/iteration.

Adjust the RISC-V clock source rating so it is preferred over the
various platform-specific MMIO clock sources.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221228004444.61568-1-samuel@sholland.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

We should set CLOCK_EVT_FEAT_C3STOP for a clock_event_device only
when riscv,timer-cannot-wake-cpu DT property is present in the RISC-V
timer DT node.

This way CLOCK_EVT_FEAT_C3STOP feature is set for clock_event_device
based on RISC-V platform capabilities rather than having it set for
all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-4-apatel@ventanamicro.comSigned-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

We add DT bindings for a separate RISC-V timer DT node which can
be used to describe implementation specific behaviour (such as
timer interrupt not triggered during non-retentive suspend).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-3-apatel@ventanamicro.comSigned-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

Similarly to commit 022eb8ae ("ARM: 8938/1: kernel: initialize
broadcast hrtimer based clock event device"), RISC-V needs to initiate
hrtimer based broadcast clock event device before C3STOP can be used.
Otherwise, the introduction of C3STOP for the RISC-V arch timer in
commit 232ccac1 ("clocksource/drivers/riscv: Events are stopped
during CPU suspend") leaves us without any broadcast timer registered.
This prevents the kernel from entering oneshot mode, which breaks timer
behaviour, for example clock_nanosleep().

A test app that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250
& C3STOP enabled, the sleep times are rounded up to the next jiffy:
== CPU: 1 ==      == CPU: 2 ==      == CPU: 3 ==      == CPU: 4 ==
Mean: 7.974992    Mean: 7.976534    Mean: 7.962591    Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000      Hi: 10.495000     Hi: 8.864000      Hi: 4.736000
Lo: 6.087000      Lo: 6.380000      Lo: 4.872000      Lo: 3.403000
Samples: 521      Samples: 521      Samples: 521      Samples: 521

Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Fixes: 232ccac1 ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-2-apatel@ventanamicro.comSigned-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

Add rockchip timer compatible string for rockchip rv1126.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221123183124.6911-3-jagan@edgeble.aiSigned-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org

Use atomic64_try_cmpxchg() instead of atomic64_cmpxchg() in
__update_gt_cputime(). The x86 CMPXCHG instruction returns success in ZF
flag, so this change saves a compare after cmpxchg() (and related move
instruction in front of cmpxchg()).

Also, atomic64_try_cmpxchg() implicitly assigns old *ptr value to "old"
when cmpxchg() fails.  There is no need to re-read the value in the loop.

No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230116165337.5810-1-ubizjak@gmail.com

The minimization done in 3945ff37 ("linux/bits.h: Extract common header
for vDSO") was required to isolate the VDSO build from the larger kernel
header impact.

The split added some inconsistency since BIT() and BIT_ULL() are now
defined in the different files which confuses unprepared reader.

Move BIT_ULL() to vdso/bits.h. No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221128141003.77929-1-andriy.shevchenko@linux.intel.com

While in theory the timer can be triggered before expires + delta, for the
cases of RT tasks they really have no business giving any lenience for
extra slack time, so override any passed value by the user and always use
zero for schedule_hrtimeout_range() calls. Furthermore, this is similar to
what the nanosleep(2) family already does with current->timer_slack_ns.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230123173206.6764-3-dave@stgolabs.net

Checking dl_task() is redundant as rt_task() returns true for deadline
tasks too.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230123173206.6764-2-dave@stgolabs.net

The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.

If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().

If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.

This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.

So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.

But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com

Pull powerpc fixes from Michael Ellerman:

 - Three fixes for various bogosity in our linker script, revealed
   by the recent commit which changed discard behaviour with some
   toolchains.

* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vmlinux.lds: Don't discard .comment
  powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
  powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

Pull memblock fixes from Mike Rapoport:
 "Small fixes in kernel-doc and tests:

   - Fix kernel-doc for memblock_phys_free() to use correct names for
     the counterpart allocation methods

   - Fix compilation error in memblock tests"

* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Fix doc for memblock_phys_free
  memblock tests: Fix compilation error.

Pull NFS client fixes from Trond Myklebust:

 - Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls

 - Fix a broken coalescing test in the pNFS file layout driver

 - Ensure that the access cache rcu path also applies the login test

 - Fix up for a sparse warning

* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix up a sparse warning
  NFS: Judge the file access cache's timestamp in rcu path
  pNFS/filelayout: Fix coalescing test for single DS
  SUNRPC: ensure the matching upcall is in-flight upon downcall

Pull cifs fixes from Steve French:
 "cifs/smb3 client fixes:

   - two multichannel fixes

   - three reconnect fixes

   - unmap fix"

* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix interface count calculation during refresh
  cifs: refcount only the selected iface during interface update
  cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
  cifs: fix race in assemble_neg_contexts()
  cifs: ignore ipc reconnect failures during dfs failover
  cifs: Fix kmap_local_page() unmapping

Pull devicetree fixes from Rob Herring:

 - Fix DT memory scanning for some MIPS boards when memory is not
   specified in DT

 - Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
   attempt broke PS3 (and possibly other PPC platforms).

 - Fix constraints in QCom Soundwire schema

* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
  Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
  dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
  of/fdt: run soc memory setup when early_init_dt_scan_memory fails

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 6.2-rc3 that resolve some
  reported issues. They include:

   - of-reported ulpi problem, so the offending commit is reverted

   - dwc3 driver bugfixes for recent changes

   - fotg210 fixes

  Most of these have been in linux-next for a while, the last few were
  on the mailing list for a long time and passed all the 0-day bot
  testing so all should be fine with them as well"

* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Ignore End Transfer delay on teardown
  usb: dwc3: xilinx: include linux/gpio/consumer.h
  usb: fotg210-udc: fix error return code in fotg210_udc_probe()
  usb: fotg210: fix OTG-only build
  Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

Pull rdma fixes from Jason Gunthorpe:
 "Most noticeable is that Yishai found a big data corruption regression
  due to a change in the scatterlist:

   - Do not wrongly combine non-contiguous pages in scatterlist

   - Fix compilation warnings on gcc 13

   - Oops when using some mlx5 stats

   - Bad enforcement of atomic responder resources in mlx5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to merge contiguous pages into the last SG properly
  RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
  RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
  RDMA/srp: Move large values to a new enum for gcc13

Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix single *.ko build

 - Fix module builds when vmlinux.o or Module.symver is missing

* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: readd -w option when vmlinux.o or Module.symver is missing
  kbuild: fix single *.ko build

Pull drm fixes from Daniel Vetter:
 "Still not much, but more than last week. Dave should be back next week
  from the beaching.

  drivers:
   - i915-gvt fixes
   - amdgpu/kfd fixes
   - panfrost bo refcounting fix
   - meson afbc corruption fix
   - imx plane width fix

  core:
   - drm/sched fixes
   - drm/mm kunit test fix
   - dma-buf export error handling fixes"

* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amd/display: Enable Freesync Video Mode by default"
  drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
  drm/i915/gvt: use atomic operations to change the vGPU status
  drm/i915/gvt: fix vgpu debugfs clean in remove
  drm/i915/gvt: fix gvt debugfs destroy
  drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
  drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
  drm/amdkfd: Fix kernel warning during topology setup
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/imx: ipuv3-plane: Fix overlay plane width
  drm/scheduler: Fix lockup in drm_sched_entity_kill()
  drm/virtio: Fix memory leak in virtio_gpu_object_create()
  drm/meson: Reduce the FIFO lines held when AFBC is not used
  drm/tests: reduce drm_mm_test stack usage
  drm/panfrost: Fix GEM handle creation ref-counting
  drm/plane-helper: Add the missing declaration of drm_atomic_state
  dma-buf: fix dma_buf_export init order v2

TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:

  tpm tpm0: A TPM error (28) occurred continue selftest
  ...
  tpm tpm0: A TPM error (28) occurred attempting get random
  ...
  tpm tpm0: Error (28) sending savestate before suspend
  tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
  tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
  tpm_tis 00:08: PM: failed to suspend: error 28
  PM: Some devices failed to suspend, or early wake event detected

This issue was partially fixed by 23393c64 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.

In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.

Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.

The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is.  So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.

While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).

Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "The big change here is obviously the revert of the pktcdvd driver
  removal. Outside of that, just minor tweaks. In detail:

   - Re-instate the pktcdvd driver, which necessitates adding back
     bio_copy_data_iter() and the fops->devnode() hook for now (me)

   - Fix for splitting of a bio marked as NOWAIT, causing either nowait
     reads or writes to error with EAGAIN even if parts of the IO
     completed (me)

   - Fix for ublk, punting management commands to io-wq as they can all
     easily block for extended periods of time (Ming)

   - Removal of SRCU dependency for the block layer (Paul)"

* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
  block: Remove "select SRCU"
  Revert "pktcdvd: remove driver."
  Revert "block: remove devnode callback from struct block_device_operations"
  Revert "block: bio_copy_data_iter"
  ublk: honor IO_URING_F_NONBLOCK for handling control command
  block: don't allow splitting of a REQ_NOWAIT bio
  block: handle bio_split_to_limits() NULL return

Pull io_uring fixes from Jens Axboe:
 "A few minor fixes that should go into the 6.2 release:

   - Fix for a memory leak in io-wq worker creation, if we ultimately
     end up canceling the worker creation before it gets created (me)

   - lockdep annotations for the CQ locking (Pavel)

   - A regression fix for CQ timeout handling (Pavel)

   - Ring pinning around deferred task_work fix (Pavel)

   - A trivial member move in struct io_ring_ctx, saving us some memory
     (me)"

* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
  io_uring: fix CQ waiting timeout handling
  io_uring: move 'poll_multi_queue' bool in io_ring_ctx
  io_uring: lockdep annotate CQ locking
  io_uring: pin context while queueing deferred tw
  io_uring/io-wq: free worker if task_work creation is canceled

Pull arm TIF_NOTIFY_SIGNAL fixup from Jens Axboe:
 "Hui Tang reported a performance regressions with _TIF_WORK_MASK in
  newer kernels, which he tracked to a change that went into 5.11. After
  this change, we'll call do_work_pending() more often than we need to,
  because we're now testing bits 0..15 rather than just 0..7.

  Shuffle the bits around to avoid this"

* tag 'tif-notify-signal-2023-01-06' of git://git.kernel.dk/linux:
  ARM: renumber bits related to _TIF_WORK_MASK

Pull ceph fixes from Ilya Dryomov:
 "Two file locking fixes from Xiubo"

* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
  ceph: avoid use-after-free in ceph_fl_release_lock()
  ceph: switch to vfs_inode_has_locks() to fix file lock bug

Pull UDF fixes from Jan Kara:
 "Two fixups of the UDF changes that went into 6.2-rc1"

* tag 'fixes_for_v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: initialize newblock to 0
  udf: Fix extension of the last extent in the file

Pull btrfs fixes from David Sterba:
 "A few more regression and regular fixes:

   - regressions:
       - fix assertion condition using = instead of ==
       - fix false alert on bad tree level check
       - fix off-by-one error in delalloc search during lseek

   - fix compat ro feature check at read-write remount

   - handle case when read-repair happens with ongoing device replace

   - updated error messages"

* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix compat_ro checks against remount
  btrfs: always report error in run_one_delayed_ref()
  btrfs: handle case when repair happens with dev-replace
  btrfs: fix off-by-one in delalloc search during lseek
  btrfs: fix false alert on bad tree level check
  btrfs: add error message for metadata level mismatch
  btrfs: fix ASSERT em->len condition in btrfs_get_extent

Pull RISC-V fixes from Palmer Dabbelt:

 - use the correct mask for c.jr/c.jalr when decoding instructions

 - build fix for get_user() to avoid a sparse warning

* tag 'riscv-for-linus-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: uaccess: fix type of 0 variable on error in get_user()
  riscv, kprobes: Stricter c.jr/c.jalr decoding

Merge tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix segfault when trying to process tracepoints present in a
   perf.data file and not linked with libtraceevent.

 - Fix build on uClibc systems by adding missing sys/types.h include,
   that was being obtained indirectly which stopped being the case when
   tools/lib/traceevent was removed.

 - Don't show commands in 'perf help' that depend on linking with
   libtraceevent when not building with that library, which is now a
   possibility since we no longer ship a copy in tools/lib/traceevent.

 - Fix failure in 'perf test' entry testing the combination of 'perf
   probe' user space function + 'perf record' + 'perf script' where it
   expects a backtrace leading to glibc's inet_pton() from 'ping' that
   now happens more than once with glibc 2.35 for IPv6 addreses.

 - Fix for the inet_pton perf test on s/390 where
   'text_to_binary_address' now appears on the backtrace.

 - Fix build error on riscv due to missing header for 'struct
   perf_sample'.

 - Fix 'make -C tools perf_install' install variant by not propagating
   the 'subdir' to submakes for the 'install_headers' targets.

 - Fix handling of unsupported cgroup events when using BPF counters in
   'perf stat'.

 - Count all cgroups, not just the last one when using 'perf stat' and
   combining --for-each-cgroup with --bpf-counters.

   This makes the output using BPF counters match the output without
   using it, which was the intention all along, the output should be the
   same using --bpf-counters or not.

 - Fix 'perf lock contention' core dump related to not finding the
   "__sched_text_end" symbol on s/390.

 - Fix build failure when HEAD is signed: exclude the signature from the
   version string.

 - Add missing closedir() calls to in perf_data__open_dir(), plugging a
   fd leak.

* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Fix build on uClibc systems by adding missing sys/types.h include
  perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
  perf stat: Fix handling of unsupported cgroup events when using BPF counters
  perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
  perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
  perf build: Don't propagate subdir to submakes for install_headers
  perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
  perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
  perf tools: Don't include signature in version strings
  perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
  perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
  perf tools: Fix resources leak in perf_data__open_dir()

Pull perf fix from Ingo Molnar:
 "Intel RAPL updates for new model IDs"

* tag 'perf-urgent-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel Emerald Rapids
  perf/x86/rapl: Add support for Intel Meteor Lake
  perf/x86/rapl: Treat Tigerlake like Icelake

Pull crypto fixes from Herbert Xu:
 "This fixes a CFI crash in arm64/sm4 as well as a regression in the
  caam driver"

* tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/sm4 - fix possible crash with CFI enabled
  crypto: caam - fix CAAM io mem access in blob_gen

If we delay sending End Transfer for Setup TRB to be prepared, we need
to check if the End Transfer was in preparation for a driver
teardown/soft-disconnect. In those cases, just send the End Transfer
command without delay.

In the case of soft-disconnect, there's a very small chance the command
may not go through immediately. But should it happen, the Setup TRB will
be prepared during the polling of the controller halted state, allowing
the command to go through then.

In the case of disabling endpoint due to reconfiguration (e.g.
set_interface(alt-setting) or usb reset), then it's driven by the host.
Typically the host wouldn't immediately cancel the control request and
send another control transfer to trigger the End Transfer command
timeout.

Fixes: 4db0fbb6 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:

drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
  207 |         reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
      |                      ^~~~~~~~~~~~~~~~~~~~~~~
      |                      devm_clk_get_optional

Fixes: ca05b382 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (*err < 0)
            ^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.

Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>