- 11 Dec, 2018 40 commits
-
-
Jordan Crouse authored
The functions in dpu_dbg.c aren't used. The two main dump functions fail after a lookup from dpu_dbg_base.reg_base_list which turns out to never be populated and once those are removed the rest of the file doesn't make any sense. v3: No changes v2: Moved some unrelated changes to another patch Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Sean Paul authored
Each time it's called we're holding the crtc modeset lock, so it's redundant. Changes in v2: - None Reviewed-by:
Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by:
-
Sean Paul authored
It's just for debugfs output, we don't need it Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
Instead of assigning/clearing the crtc on vblank enable/disable, we can just assign and clear the crtc on modeset. That allows us to just toggle the encoder's vblank interrupts on vblank_enable. So why is this important? Previously the driver was using the legacy pointers to assign/clear the crtc. Legacy pointers are cleared _after_ disabling the hardware, so the legacy pointer was valid during vblank_disable, but that's not something we should rely on. Instead of relying on the core ordering the legacy pointer assignments just so, we'll assign the crtc in dpu_crtc enable/disable. This is the only place that mapping can change, so we're covered there. We're also taking advantage of drm_crtc_vblank_on/off. By using this, we ensure that vblank_enable/disable can never be called while the crtc is off (which means the assigned crtc will always be valid). As such, we don't need to use modeset locks or the crtc_lock in the vblank_enable/disable routine to be sure state is consistent. ...I think. Changes in v2: - Changed crtc check in toggle_vblank to != (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
The drm_crtc_vblank_on/off calls in enable/disable guarantee that we won't call this function when crtc is not enabled. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Matches dpu_crtc_enable and we'll need the old state in a future patch Changes in v2: - None Reviewed-by:
-
Sean Paul authored
The indirection of registering a callback and opaque pointer isn't reall useful when there's only one callsite. So instead of having the vblank_cb registration, just give encoder a crtc and let it directly call the vblank handler. In a later patch, we'll make use of this further. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
I think the intention here was to protect the enc->crtc access, but that's insufficient to avoid enc->crtc changing. Fortunately we're already holding the modeset lock when this is called (from atomic_check), so remove the crtc_lock and add a modeset lock check. While we're at it, use the encoder mask from crtc state instead of legacy pointer. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
There are 4 times that _dpu_crtc_vblank_enable_no_lock() is called: 1- crtc enable 2- crtc disable 3- crtc vblank enable 4- crtc vblank disable When we enable or disable the crtc, we call drm_crtc_vblank_on and drm_crtc_vblank_off respectively. That will gate vblank enables and disables to only being called when the crtc is active. That means that we can just enable/disable pm runtime in crtc enable/disable. This will be beneficial in trying to eliminate blocking calls from the vblank call chain. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Add modeset lock checks to functions that could be called outside the core atomic stack. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's for legacy drivers, for atomic drivers crtc->state->encoder_mask should be used to map encoder to crtc. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
This patch wraps dpu_core_perf_crtc_release_bw() with modeset locks since it digs into the state objects. Changes in v2: - None Changes in v3: - Use those nifty new DRM_MODESET_LOCK_ALL_* helpers (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Sean Paul authored
Now that runtime resume is handled in encoder, we don't need to worry about crtc_lock recursion when calling pm_runtime_(get|put). So drop the lock drops in _dpu_crtc_vblank_enable_no_lock(). Changes in v2: - None Reviewed-by:
-
Sean Paul authored
The crtc runtime resume doesn't actually operate on the crtc, but rather its encoders. The problem with this is that we need to inspect the crtc state to get the currently connected encoders. Since runtime resume isn't guaranteed to be called while holding the modeset locks (although it sometimes is), this presents a race condition. Now that we have ->enabled on the virtual encoders, and a lock to protect it, just call resume on each encoder and only restore the ones that are enabled. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
Add a bool to dpu_encoder_virt to track whether the encoder is enabled or not. Repurpose the enc_lock mutex to ensure that it is consistent with the hw state. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
enc_spinlock instead of enc_spin_lock. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Now that we don't have any event handlers, remove dpu_power_handle! Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's only used in core_perf, so stick it there (and change the name to reflect that). Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's needed for struct dss_module_power, and is currently being pulled in by dpu_power_handle.h Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's unused Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Instead of registering through dpu_power_handle just to get a call on runtime_resume, call the crtc function directly. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
power_events are only used for pm_runtime, and that's all handled in dpu_kms. So just call vbif_init_memtypes at the correct times. Changes in v2: - Removed obsolete comment (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
There's only one client -- core, and it's only used for runtime pm which is already refcounted. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's only used for debugfs, so just output the enum value instead. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Since dpu_crtc subclasses crtc_state, we need a custom .reset hook in order to allocate the right amount of memory to accommodate the additional struct members in dpu_crtc_state. So bring it [partially] back. Relevant KASAN splat: [ 10.333382] ================================================================== [ 10.344288] BUG: KASAN: slab-out-of-bounds in kmemdup+0x50/0x80 [ 10.350390] Read of size 736 at addr ffffffc0d9f06080 by task frecon/394 [ 10.358861] CPU: 6 PID: 394 Comm: frecon Tainted: G W 4.19.4 #121 [ 10.366476] Hardware name: Google Cheza (rev2) (DT) [ 10.371514] Call trace: [ 10.374087] dump_backtrace+0x0/0x194 [ 10.377878] show_stack+0x20/0x28 [ 10.381330] dump_stack+0xa0/0xc8 [ 10.384783] print_address_description+0x78/0x2e0 [ 10.389639] kasan_report+0x290/0x2d0 [ 10.393428] check_memory_region+0x20/0x14c [ 10.397740] __asan_loadN+0x14/0x1c [ 10.401345] kmemdup+0x50/0x80 [ 10.404524] dpu_crtc_duplicate_state+0x58/0xa0 [ 10.409228] drm_atomic_get_crtc_state+0xac/0x178 [ 10.414095] __drm_atomic_helper_set_config+0x54/0x4a4 [ 10.419393] drm_atomic_helper_set_config+0x60/0xb4 [ 10.424435] drm_mode_setcrtc+0x720/0x760 [ 10.428570] drm_ioctl_kernel+0xd8/0x13c [ 10.432617] drm_ioctl+0x380/0x4f4 [ 10.436150] drm_compat_ioctl+0x54/0x13c [ 10.440219] __arm64_compat_sys_ioctl+0x1d8/0xef4 [ 10.445086] el0_svc_common+0xd8/0x138 [ 10.448961] el0_svc_compat_handler+0x58/0x68 [ 10.453463] el0_svc_compat+0x8/0x18 [ 10.458712] Allocated by task 56: [ 10.462148] kasan_kmalloc.part.4+0x48/0xf4 [ 10.466465] kasan_kmalloc+0x8c/0xa0 [ 10.470165] kmem_cache_alloc_trace+0x25c/0x27c [ 10.474848] drm_atomic_helper_crtc_reset+0x68/0x98 [ 10.479877] drm_mode_config_reset+0xc4/0x19c [ 10.484383] msm_drm_bind+0x814/0x8dc [ 10.488169] try_to_bring_up_master.part.7+0x48/0xac [ 10.493282] component_master_add_with_match+0x158/0x198 [ 10.498758] msm_pdev_probe+0x328/0x348 [ 10.502736] platform_drv_probe+0x74/0xc8 [ 10.506877] really_probe+0x1ac/0x35c [ 10.510659] driver_probe_device+0xd4/0x118 [ 10.514975] __device_attach_driver+0xc8/0xf4 [ 10.519477] bus_for_each_drv+0xb4/0xe4 [ 10.523439] __device_attach+0xd0/0x158 [ 10.527394] device_initial_probe+0x24/0x30 [ 10.531715] bus_probe_device+0x50/0xe4 [ 10.535681] deferred_probe_work_func+0xac/0xdc [ 10.540376] process_one_work+0x3f0/0x6d4 [ 10.544521] worker_thread+0x3f4/0x520 [ 10.548399] kthread+0x1b4/0x1c8 [ 10.551740] ret_from_fork+0x10/0x18 [ 10.556986] Freed by task 0: [ 10.559967] (stack is not available) [ 10.565216] The buggy address belongs to the object at ffffffc0d9f06080 which belongs to the cache kmalloc-1024 of size 1024 [ 10.578268] The buggy address is located 0 bytes inside of 1024-byte region [ffffffc0d9f06080, ffffffc0d9f06480) [ 10.590248] The buggy address belongs to the page: [ 10.595195] page:ffffffbf0367c000 count:1 mapcount:0 mapping:ffffffc0de40f680 index:0x0 compound_mapcount: 0 [ 10.605321] flags: 0x4000000000008100(slab|head) [ 10.610100] raw: 4000000000008100 ffffffbf0369fa08 ffffffbf0367f008 ffffffc0de40f680 [ 10.618077] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000 [ 10.626049] page dumped because: kasan: bad access detected [ 10.633341] Memory state around the buggy address: [ 10.638282] ffffffc0d9f06180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 10.645710] ffffffc0d9f06200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 10.653139] >ffffffc0d9f06280: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc [ 10.660571] ^ [ 10.665774] ffffffc0d9f06300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 10.673210] ffffffc0d9f06380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 10.680639] ================================================================== Fixes: a6ba45afda41 (drm/msm/dpu: Replace dpu_crtc_reset by atomic helper) Cc: Sean Paul <seanpaul@chromium.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by:Bruce Wang <bzwang@chromium.org> Signed-off-by:
-
Jonathan Marek authored
This patch allows using drm/msm without qcom display hardware. It adds a amd,imageon compatible, which is used instead of qcom,adreno, but does not require a top level msm node. Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Matthias Kaehlcke authored
Allow the PHY drivers to get the ref clock from the DT. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jonathan Marek authored
Document the new amd,imageon compatible, used for non-qcom hardware that uses the drm/msm driver (iMX5). Signed-off-by:
-
Jonathan Marek authored
This allows controlling which of the 8 lanes are used for 6 bit color. Signed-off-by:
-
Jonathan Marek authored
A2XX has its own very simple MMU. Added a msm_use_mmu() function because we can't rely on iommu_present to decide to use MMU or not. Signed-off-by:
-
Douglas Anderson authored
When trying to get the display up on my sdm845 board I noticed that the display wouldn't probe if I had the dsi1 node marked as "disabled" even though my board doesn't use dsi1. It looks like the msm code adds all nodes to its list of components even if they are disabled. I believe this doesn't work because all registered components need to come up before we finish probing. Let's do like other DRM code and only add available components. Signed-off-by:
-
Jordan Crouse authored
Add a buffer object name for the a6xx crashdumper so it can be seen with the changes introduced by 7799a98edd ("drm/msm: Add a name field for gem objects"). Signed-off-by: -
Jordan Crouse authored
dadb36b7ec42 ("drm/msm: Add a common function to free kernel buffer objects") missed freeing the crashdumper state for a6xx. Signed-off-by: -
Sean Paul authored
This patch sprinkles a few async/legacy_cursor_update checks through commit to ensure that cursor updates aren't blocked on vsync. There are 2 main components to this, the first is that we don't want to wait_for_commit_done in msm_atomic before returning from atomic_complete. The second is that in dpu we don't want to wait for frame_done events when updating the cursor. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
There exists a case where a flush of a plane/dma may have been triggered & started from an async commit. If that plane/dma is subsequently disabled by the next commit, the flush register will continue to hold the flush bit for the disabled plane. Since the bit remains active, pending_kickoff_cnt will never decrement and we'll miss frame_done events. This patch limits the check of flush_register to include only those bits which have been updated with the latest commit. Changes in v2: - None Reviewed-by:
-
Jayant Shekhar authored
In case of msm drm bind failure, dpu_mdss_destroy is triggered. In this function, resources are freed and pm runtime disable is called, which triggers dpu_mdss_disable. Now in dpu_mdss_disable, driver tries to access a memory which is already freed. This results in kernel panic. Fix this by ensuring proper sequence of dpu destroy and disable calls. Changes in v2: - Removed double spacings [Jeykumar] Tested-by:
Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by:
-
Abhinav Kumar authored
Fix the dsi clock names in the DSI 10nm PLL driver to match the names in the dispcc driver as those are according to the clock plan of the chipset. Changes in v2: - Update the clock diagram with the new clock name Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Jonathan Marek authored
otherwise, priv->kms is non-NULL and msm_drm_uninit will cause a panic. Signed-off-by:
-
Jonathan Marek authored
Add the mdp5_cfg_hw entry for MDP5 version v1.15 found on msm8917. Signed-off-by:
-
