- 01 Oct, 2022 34 commits
-
-
Ye Bin authored
To avoid to 'state->fc_regions_size' mismatch with 'state->fc_regions' when fail to reallocate 'fc_reqions',only update 'state->fc_regions_size' after 'state->fc_regions' is allocated successfully. Cc: stable@kernel.org Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220921064040.3693255-4-yebin10@huawei.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
As krealloc may return NULL, in this case 'state->fc_regions' may not be freed by krealloc, but 'state->fc_regions' already set NULL. Then will lead to 'state->fc_regions' memory leak. Cc: stable@kernel.org Signed-off-by:
-
Ye Bin authored
As krealloc may return NULL, in this case 'state->fc_modified_inodes' may not be freed by krealloc, but 'state->fc_modified_inodes' already set NULL. Then will lead to 'state->fc_modified_inodes' memory leak. Cc: stable@kernel.org Signed-off-by:
-
Guoqing Jiang authored
It is already checked after comment "check for invalid bits set", so let's remove this one. Signed-off-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20220918115219.12407-1-guoqing.jiang@linux.devSigned-off-by:
-
Ye Bin authored
In fc_do_one_pass() miss release buffer head after use which will lead to reference count leak. Cc: stable@kernel.org Signed-off-by:
-
Jason Yan authored
Now since all preparations is done, we can move the DIOREAD_NOLOCK setting to ext4_set_def_opts(). Suggested-by:
Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Jason Yan authored
Since sb->s_blocksize is now initialized at the very beginning, the local variable 'blocksize' in __ext4_fill_super() is not needed now. Remove it and use sb->s_blocksize instead. Signed-off-by:
-
Jason Yan authored
Now we load the super block from the disk in two steps. First we load the super block with the default block size(EXT4_MIN_BLOCK_SIZE). Second we load the super block with the real block size. The second step is a little far from the first step. This patch move these two steps together in a new function. Signed-off-by:
-
Jason Yan authored
Factor out ext4_journal_data_mode_check(). No functional change. Signed-off-by:
-
Jason Yan authored
This patch group the journal load and initialize code together and factor out ext4_load_and_init_journal(). This patch also removes the lable 'no_journal' which is not needed after refactor. Signed-off-by:
-
Jason Yan authored
Factor out ext4_group_desc_init() and ext4_group_desc_free(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_geometry_check(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_check_feature_compatibility(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_init_metadata_csum(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_encoding_init(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_inode_info_init(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_fast_commit_init(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_handle_clustersize(). No functional change. Signed-off-by:
-
Jason Yan authored
Factor out ext4_set_def_opts(). No functional change. Signed-off-by:
-
Jason Yan authored
The 'cantfind_ext4' error handler is just a error msg print and then goto failed_mount. This two level goto makes the code complex and not easy to read. The only benefit is that is saves a little bit code. However some branches can merge and some branches dot not even need it. So do some refactor and remove it. Signed-off-by:
-
Jason Yan authored
Before these two branches neither loaded the journal nor created the xattr cache. So the right label to goto is 'failed_mount3a'. Although this did not cause any issues because the error handler validated if the pointer is null. However this still made me confused when reading the code. So it's still worth to modify to goto the right label. Signed-off-by:
-
Ye Bin authored
If fastcommit is already disabled, there isn't need to mark inode ineligible. So move 'ext4_fc_disabled()' judgement bofore 'ext4_should_journal_data(inode)' judgement which can avoid to do meaningless judgement. Signed-off-by:
-
Ye Bin authored
Factor out ext4_fc_disabled(). No functional change. Signed-off-by:
-
Ye Bin authored
In 'ext4_fc_write_inode' function first call 'ext4_get_inode_loc' get 'iloc', after use it miss release 'iloc.bh'. So just release 'iloc.bh' before 'ext4_fc_write_inode' return. Cc: stable@kernel.org Signed-off-by:
-
Ye Bin authored
In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count which may lead to use-after-free. So judge buffer if uptodate before put buffer head reference count. Cc: stable@kernel.org Signed-off-by:
-
Ye Bin authored
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. Cc: stable@kernel.org Signed-off-by:
-
Zhihao Cheng authored
Following process may lead to fs corruption: 1. ext4_create(dir/foo) ext4_add_nondir ext4_add_entry ext4_dx_add_entry a. add_dirent_to_buf ext4_mark_inode_dirty ext4_handle_dirty_metadata // dir inode bh is recorded into journal b. ext4_append // dx_get_count(entries) == dx_get_limit(entries) ext4_bread(EXT4_GET_BLOCKS_CREATE) ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_mb_new_blocks dquot_alloc_block dquot_alloc_space_nodirty inode_add_bytes // update dir's i_blocks ext4_ext_insert_extent ext4_ext_dirty // record extent bh into journal ext4_handle_dirty_metadata(bh) // record new block into journal inode->i_size += inode->i_sb->s_blocksize // new size(in mem) c. ext4_handle_dirty_dx_node(bh2) // record dir's new block(dx_node) into journal d. ext4_handle_dirty_dx_node((frame - 1)->bh) e. ext4_handle_dirty_dx_node(frame->bh) f. do_split // ret err! g. add_dirent_to_buf ext4_mark_inode_dirty(dir) // update raw_inode on disk(skipped) 2. fsck -a /dev/sdb drop last block(dx_node) which beyonds dir's i_size. /dev/sdb: recovering journal /dev/sdb contains a file system with errors, check forced. /dev/sdb: Inode 12, end of extent exceeds allowed value (logical block 128, physical block 3938, len 1) 3. fsck -fn /dev/sdb dx_node->entry[i].blk > dir->i_size Pass 2: Checking directory structure Problem in HTREE directory inode 12 (/dir): bad block number 128. Clear HTree index? no Problem in HTREE directory inode 12: block #3 has invalid depth (2) Problem in HTREE directory inode 12: block #3 has bad max hash Problem in HTREE directory inode 12: block #3 not referenced Fix it by marking inode dirty directly inside ext4_append(). Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216466 Cc: stable@vger.kernel.org Signed-off-by:Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by:
-
Gaosheng Cui authored
ext4_inline_data_fiemap() has been removed since commit d3b6f23f ("ext4: move ext4_fiemap to use iomap framework"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by:
-
Jeff Layton authored
ext4 currently updates the i_version counter when the atime is updated during a read. This is less than ideal as it can cause unnecessary cache invalidations with NFSv4 and unnecessary remeasurements for IMA. The increment in ext4_mark_iloc_dirty is also problematic since it can corrupt the i_version counter for ea_inodes. We aren't bumping the file times in ext4_mark_iloc_dirty, so changing the i_version there seems wrong, and is the cause of both problems. Remove that callsite and add increments to the setattr, setxattr and ioctl codepaths, at the same times that we update the ctime. The i_version bump that already happens during timestamp updates should take care of the rest. In ext4_move_extents, increment the i_version on both inodes, and also add in missing ctime updates. [ Some minor updates since we've already enabled the i_version counter unconditionally already via another patch series. -- TYT ] Cc: stable@kernel.org Cc: Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20220908172448.208585-3-jlayton@kernel.orgSigned-off-by:
-
Jan Kara authored
Commit 307af6c8 ("mbcache: automatically delete entries from cache on freeing") started nesting cache->c_list_lock under the bit locks protecting hash buckets of the mbcache hash table in mb_cache_entry_create(). This causes problems for real-time kernels because there spinlocks are sleeping locks while bitlocks stay atomic. Luckily the nesting is easy to avoid by holding entry reference until the entry is added to the LRU list. This makes sure we cannot race with entry deletion. Cc: stable@kernel.org Fixes: 307af6c8 ("mbcache: automatically delete entries from cache on freeing") Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Andrew Perepechko authored
LIFO wakeup order is unfair and sometimes leads to a journal user not being able to get a journal handle for hundreds of transactions in a row. FIFO wakeup can make things more fair. Cc: stable@kernel.org Signed-off-by:
Alexey Lyashkov <alexey.lyashkov@gmail.com> Reviewed-by:
-
Jinke Han authored
In our product environment, we encounter some jbd hung waiting handles to stop while several writters were doing memory reclaim for buffer head allocation in delay alloc write path. Ext4 do buffer head allocation with holding transaction handle which may be blocked too long if the reclaim works not so smooth. According to our bcc trace, the reclaim time in buffer head allocation can reach 258s and the jbd transaction commit also take almost the same time meanwhile. Except for these extreme cases, we often see several seconds delays for cgroup memory reclaim on our servers. This is more likely to happen considering docker environment. One thing to note, the allocation of buffer heads is as often as page allocation or more often when blocksize less than page size. Just like page cache allocation, we should also place the buffer head allocation before startting the handle. Cc: stable@kernel.org Signed-off-by:
Jinke Han <hanjinke.666@bytedance.com> Link: https://lore.kernel.org/r/20220903012429.22555-1-hanjinke.666@bytedance.comSigned-off-by:
-
Zhang Yi authored
Recently we notice that ext4 filesystem would occasionally fail to read metadata from disk and report error message, but the disk and block layer looks fine. After analyse, we lockon commit 88dbcbb3 ("blkdev: avoid migration stalls for blkdev pages"). It provide a migration method for the bdev, we could move page that has buffers without extra users now, but it lock the buffers on the page, which breaks the fragile metadata read operation on ext4 filesystem, ext4_read_bh_lock() was copied from ll_rw_block(), it depends on the assumption of that locked buffer means it is under IO. So it just trylock the buffer and skip submit IO if it lock failed, after wait_on_buffer() we conclude IO error because the buffer is not uptodate. This issue could be easily reproduced by add some delay just after buffer_migrate_lock_buffers() in __buffer_migrate_folio() and do fsstress on ext4 filesystem. EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #73193: comm fsstress: reading directory lblock 0 EXT4-fs error (device pmem1): __ext4_find_entry:1658: inode #75334: comm fsstress: reading directory lblock 0 Fix it by removing the trylock logic in ext4_read_bh_lock(), just lock the buffer and submit IO if it's not uptodate, and also leave over readahead helper. Cc: stable@kernel.org Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Reviewed-by:
-
Jeff Layton authored
The original i_version implementation was pretty expensive, requiring a log flush on every change. Because of this, it was gated behind a mount option (implemented via the MS_I_VERSION mountoption flag). Commit ae5e165d (fs: new API for handling inode->i_version) made the i_version flag much less expensive, so there is no longer a performance penalty from enabling it. xfs and btrfs already enable it unconditionally when the on-disk format can support it. Have ext4 ignore the SB_I_VERSION flag, and just enable it unconditionally. While we're in here, mark the i_version mount option Opt_removed. [ Removed leftover bits of i_version from ext4_apply_options() since it now can't ever be set in ctx->mask_s_flags -- lczerner ] Cc: stable@kernel.org Cc: Dave Chinner <david@fromorbit.com> Cc: Benjamin Coddington <bcodding@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J. Wong <djwong@kernel.org> Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
-
- 30 Sep, 2022 6 commits
-
-
Lukas Czerner authored
Currently the I_DIRTY_TIME will never get set if the inode already has I_DIRTY_INODE with assumption that it supersedes I_DIRTY_TIME. That's true, however ext4 will only update the on-disk inode in ->dirty_inode(), not on actual writeback. As a result if the inode already has I_DIRTY_INODE state by the time we get to __mark_inode_dirty() only with I_DIRTY_TIME, the time was already filled into on-disk inode and will not get updated until the next I_DIRTY_INODE update, which might never come if we crash or get a power failure. The problem can be reproduced on ext4 by running xfstest generic/622 with -o iversion mount option. Fix it by allowing I_DIRTY_TIME to be set even if the inode already has I_DIRTY_INODE. Also make sure that the case is properly handled in writeback_single_inode() as well. Additionally changes in xfs_fs_dirty_inode() was made to accommodate for I_DIRTY_TIME in flag. Thanks Jan Kara for suggestions on how to make this work properly. Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
ea_inodes are using i_version for storing part of the reference count so we really need to leave it alone. The problem can be reproduced by xfstest ext4/026 when iversion is enabled. Fix it by not calling inode_inc_iversion() for EXT4_EA_INODE_FL inodes in ext4_mark_iloc_dirty(). Cc: stable@kernel.org Signed-off-by:
-
Jan Kara authored
The check in __ext4_read_dirblock() for block being outside of directory size was wrong because it compared block number against directory size in bytes. Fix it. Fixes: 65f8ea4c ("ext4: check if directory block is within i_size") CVE: CVE-2022-1184 CC: stable@vger.kernel.org Signed-off-by:
-
Ritesh Harjani (IBM) authored
submit_bh/submit_bh_wbc are non-blocking functions which just submit the bio and return. The caller of submit_bh/submit_bh_wbc needs to wait on buffer till I/O completion and then check buffer head's b_state field to know if there was any I/O error. Hence there is no need for these functions to have any return type. Even now they always returns 0. Hence drop the return value and make their return type as void to avoid any confusion. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Ritesh Harjani (IBM) authored
submit_bh always returns 0. This patch drops the useless return value of submit_bh from __sync_dirty_buffer(). Once all of submit_bh callers are cleaned up, we can make it's return type as void. Signed-off-by:
-
Ritesh Harjani (IBM) authored
submit_bh always returns 0. This patch drops the useless return value of submit_bh from ntfs_submit_bh_for_read(). Once all of submit_bh callers are cleaned up, we can make it's return type as void. Reviewed-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
