Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with
device entry.

This commit changes the processing of model-dependent quirk with the
entry. As a result, the transactions are sent only for Loud models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA OXFW driver uses AV/C Audio Subunit commands to control some models.
The commands get/set the state of Feature function block of the subunit.
The commands are not specific to OXFW, thus there's a possibility to use
them in the other drivers.

Currently, helper functions for the commands require 'struct snd_oxfw',
although, it's not necessarily required. It's better to change prototype
of the functions without the structure for future use.

This commit changes the prototype.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit renames local functions with prefix 'spkr_', so that they're
for firewire-speakers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In ALSA firewire stack, drivers basically has no control elements. This
is due to the fact that each model has own functionality even if they use
the same communication chipset. Implementing all of the functionalities in
kernel space unreasonably increases our efforts to maintain the stack. In
most case, these functionalities can be implemented in userspace via Linux
fw character devices.

However, ALSA OXFW driver has control elements comes from old
firewire-speakers driver. Adding the elements is in a file names as
'oxfw-control.c', while the elements are really model-specific. The
name is confusing because it gives an idea to handle control elements
for all of OXFW-based models.

This commit renames the file so that it's just for models supported by
old firewire-speakers driver.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Intel Atom processors seem to have a problem at recording when
bdl_pos_adj is set to an odd value.  When a value like 1 is used, it
may drop the samples unexpectedly.  Actually, for the old Atoms, we
used to set AZX_DRIVER_SCH type, and this assigns 32 as default.
Meanwhile the newer chips, Baytrail and Braswell, are set as
AZX_DRIVER_PCH, and the lower default value, 1, is assigned.

This patch changes the default values for these chipsets to a safer
default, 32, again.  Since changing the driver type (AZX_DRIVER_XXX)
leads to the rename of the driver string, it would result in a
possible regression.  So, we can't change the type.  Instead, in this
patch, manual (ugly) PCI ID checks are added on top.

A drawback by this increase is the slight increase of the latency, but
it's a sub-ms order in normal situations, so mostly negligible.
Reported-and-tested-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just a minor cleanup; instead of passing an array, pass the assigned
bdl_pos_adj option value directory in struct azx.  Also split the code
to get the default bdl_pos_adj value for the change that will follow
after this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The usb_protocol_ops structures are never modified, so declare them as
const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent commit [e90247f9: ALSA: hda - Split ELD update code
from hdmi_present_sense()] rewrote the HDMI jack handling code, but a
slight behavior change sneaked in unexpectedly.  When the jack isn't
connected, it tries repoll unnecessarily.

This patch addresses the flaw, to the right behavior as before.

Fixes: e90247f9 ('ALSA: hda - Split ELD update code from hdmi_present_sense()')
Reported-and-tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Due to the recent change, HDA controller driver for Intel PCH tries to
bind i915 audio component always at the probe time no matter whether
HDMI/DP codec is found.  This is, however, superflulous for old
chipsets (e.g. on IVB) where they don't have always the HDMI/DP codecs
but  often have only a discrete GPU instead.

For the newer chipsets, we need already the i915 binding from the
beginning due to power well control.  Meanwhile, for older chipsets
where we don't need power well, we don't need the i915 binding at the
controller level.

This patch removes again the i915 binding in the HDA controller driver
for old Intel PCHs, but adds the binding in HDMI/DP codec driver
instead.  This allows still the use of the direct notification from
the graphics driver while we can avoid the unnecessary load of i915
driver for machines only with another GPU.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The audio component is enabled only when CONFIG_SND_HDA_I915 is set.
Give a dummy macro for allowing the compiler optimize out the relevant
codes when this Kconfig isn't set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The OSS sound drivers used to rely on virt_to_bus(), but don't any more,
so we can remove the Kconfig dependency.

As a lot of architectures don't provide VIRT_TO_BUS any more, removing
the dependency in sounds/oss/ would make the deprecated drivers appear
there, which we probably don't want. Instead I'm replacing the
simple dependency with 'VIRT_TO_BUS || RPC || NETWINDER' so we can
still build these sound drivers for the platforms that need them,
but don't change anything on other architectures.

As a follow-up, we can remove the virt_to_bus() implementation
and Kconfig symbol in the ARM architecture.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd-hda-intel driver tries to bind with i915 audio component always
when AZX_DCAPS_I915_POWERWELL is set in the driver caps.  This was
mostly OK in the past, as the flag was applied only to a limited set
of devices, namely, Haswell and Broadwell.  On these machines, i915
graphics is almost mandatory as long as HDMI/DP is concerned.

Recently the application of i915 binding was widened to more Intel
chips.  On these chips, the chance of a kernel without i915 graphics
is much higher, and such user would hit an error like:

 snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)

Although the error itself is harmless, it's certainly superfluous even
to try binding with i915, if we already know that there isn't any.

This patch fixes it by simply defining AZX_DCAPS_I915_POWERWELL as 0
in the case without i915.  Then all codes referring to this flag will
be optimized out by the compiler.

Fixes: 6603249d ('ALSA: hda - Enable audio component for old Intel PCH devices')
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent commit [6603249d: ALSA: hda - Enable audio component
for old Intel PCH devices] enabled the i915 binding for HDMI/DP on old
Intel PCHs.  But many boards are without HDMI/DP, and they actually
don't need i915 binding, and yet the driver has a check of i915
binding and complains like
	Haswell must be built with CONFIG_SND_HDA_I915
This error is false-positive, and it should be put only for HSW/BDW,
instead of all devices that may be bound with i915.

This patch fixes the condition to check, as well as rephrasing the
message specific to HSW/BDW HDMI/DP.

Fixes: 6603249d ('ALSA: hda - Enable audio component for old Intel PCH devices')
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Many codecs, typically found on Realtek codecs, have the analog
loopback path merged to the secondary input of the middle of the
output paths.  Currently, we don't offer the dynamic switching in such
configuration but let each loopback path mute by itself.

This should work well in theory, but in reality, we often see that
such a dead loopback path causes some background noises even if all
the elements get muted.  Such a problem has been fixed by adding the
quirk accordingly to disable aamix, and it's the right fix, per se.
The only problem is that it's not so trivial to achieve it; user needs
to pass a hint string via patch module option or sysfs.

This patch gives a bit improvement on the situation: it adds "Loopback
Mixing" control element for such codecs like other codecs (e.g. IDT or
VIA codecs) with the individual loopback paths.  User can turn on/off
the loopback path simply via a mixer app.

For keeping the compatibility, the loopback is still enabled on these
codecs.  But user can try to turn it off if experiencing a suspicious
background or click noise on the fly, then build a static fixup later
once after the problem is addressed.

Other than the addition of the loopback enable/disablement control,
there should be no changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

An exported function snd_hda_parse_nid_path() is used only inside
hda_generic.c.  Let's make it a static local function for a better
code optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

An exported helper function snd_hda_get_nid_path() is nowhere used.
Let's remove it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Compress offload does not support ioctl calls from a 32bit userspace
in a 64 bit kernel. This patch adds support for ioctls from a 32bit
userspace in a 64bit kernel
Signed-off-by: Ravindra Lokhande <rlokhande@nvidia.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

As i915 graphics driver provides the notification via audio component,
not only the currently implemented HSW+ and VLV+ platforms but also
all other PCH-based platforms (e.g. Cougar Point, Panther  Point, etc)
can use this infrastructure.  It'll improve the reliability and the
power consumption significantly, especially once when we implement the
ELD notification via component.  As a preliminary, this patch enables
the usage of audio component for all PCH platforms.

The HDA controller just needs to set AZX_DCAPS_I915_POWERWELL flag
appropriately.  The name of the flag is a bit confusing, but this
actually works even on the chips without the powerwell but accesses
only the other component ops.

In the HDMI/DP codec driver side, we just need to register/unregister
the notifier for such chips.  This can be identified by checking the
audio_component field in the assigned hdac_bus.

One caveat is that PCH for Haswell and Broadwell must not be bound
with i915 audio component, as there are dedicated HD-audio HDMI
controllers on these platforms.  Ditto for Poulsbo and Oaktrail as
they use gma500 graphics, not i915.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is a preliminary patch for the later change to support ELD/jack
handling with i915 audio component.  This splits the ELD update code
from hdmi_present_sense() so that it can be called from other places.

Just a code refactoring, no functional change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of doing in each caller side, snd_hdmi_parse_eld() does
zero-clear of the parsed data by itself.  This is safer and simplifies
the upcoming code changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The ALSA PCM, mixer and sequencer OSS emulations provide the 32bit
compatible ioctl, but they just call the 64bit native ioctl as is.
Although this works in most cases, passing the argument value as-is
isn't guaranteed to work on all architectures.  We need to convert it
via compat_ptr() instead.

This patch addresses the missing conversions.  Since all relevant
ioctls in these functions take the argument as a pointer, we do the
pointer conversion in each compat_ioctl and pass it as a 64bit value
to the native ioctl.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The ELD notification can be received asynchronously from the graphics
side, and this may happen just at the moment the sound driver is
processing the suspend or the resume, and it would confuse the whole
procedure.  Since the ELD and connection states are updated in anyway
at the end of the resume, we can skip it when received during PM
process.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

I've tested it on one device and it works fine, no clicks.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

minor change, indenting is one tab out.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It's supposed to be equivalent with CX20724.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The numbers aren't always linear, just like in the real world.
Correct to the right numbers stated in the datasheet (although we
can't trust the datasheet as well).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Make snd_compress_new take an id string (like snd_pcm_new).
This string can be included in the procfs info.

This patch also updates soc_new_compress() to create an ID
based on the stream and dai name, as done for PCM streams.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch implements a procfs info file for compr nodes when
SND_VERBOSE_PROCFS is enabled. This is equivalent to what the PCM
core already does for pcm nodes.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The snd_i2c_ops structures are never modified, so declare them as const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The action_ops structures are never modified, so declare them as const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent addition of ELD notifier for Intel HDMI/DP codec may lead
the bad codec connection found as kernel messages like below:
 Suspending console(s) (use no_console_suspend to debug)
 hdmi_present_sense: snd_hda_codec_hdmi hdaudioC0D2: HDMI status: Codec=2 Pin=6 Presence_Detect=1 ELD_Valid=1
 snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f2e08
 snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x2, last cmd=0x206f2e08
 ....
  snd_hda_codec_hdmi hdaudioC0D2: HDMI: ELD buf size is 0, force 128
  snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x206f2f00
 snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x206f2f00
 snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x206f2f00
 azx_single_wait_for_response: 42 callbacks suppressed

This seems appearing when the sound driver went to suspend before i915
driver.  Then i915 driver disables HDMI/DP audio bit and calls the
registered notifier, and the HDA codec tries to handle it as a
hot(un)plug.  But since the driver is already in the suspended state,
it fails miserably.

As this is a sort of spurious wakeup, it can be ignored safely, as
long as it's delivered during the system suspend.  OTOH, if a
notification comes during the runtime suspend, the situation is
different: we need to wake up.  But during the system suspend, such a
notification can't be the reason for a wakeup.

This patch addresses it by a simple check of the current sound card
status.  The skipped notification doesn't matter because the HDA
driver will check the plugged status forcibly at the resume in
return.

Then, why the card status, not a runtime PM status or else?  The HDA
controller driver is supposed to set the card status to D3 at the
system suspend but not at the runtime suspend.  So we can see it as a
flag that is set only for the system suspend.  Admittedly, it's a bit
ugly, but it should work well for now.
Reported-and-tested-by: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Fixes: 25adc137 ('ALSA: hda - Wake the codec up on pin/ELD notify events')
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.4

Quite a large batch of fixes have come in since the merge window, mainly
driver specific ones but there's a couple of core ones:

 - A fix for DAPM resume on active streams to ensure everything ends up
   cleanly in the right state.
 - Reset the DAPM cache when freeing widgets to fix a crash on driver
   remove and reload.

The PM functions for nau8825 are new code which fix crashes on resume.

Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/st', 'asoc/fix/sun4i-codec', 'asoc/fix/topology', 'asoc/fix/wm8960' and 'asoc/fix/wm8962' into asoc-linus

Merge remote-tracking branches 'asoc/fix/nau8825', 'asoc/fix/ops', 'asoc/fix/rcar', 'asoc/fix/rl6231', 'asoc/fix/rockchip' and 'asoc/fix/rt5670' into asoc-linus

Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl', 'asoc/fix/fsl-sai' and 'asoc/fix/intel' into asoc-linus