- 18 Jun, 2019 3 commits
-
-
Tzung-Bi Shih authored
Change the memory allocation flag from GFP_ATOMIC to GFP_KERNEL because probe of platform device is unlikely a place where cannot sleep. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Bjorn Andersson authored
The interface used to communicate with the DSP can sleep, so mark the links as nonatomic. This prevents various sleep while atomic errors when bringing up the audio interface. Suggested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Cezary Rojewski authored
HW recommends to set DUM bit on device power up, so that DPIB write request occurs every frame regardless of whether DPIB has changed or not. This addresses incorrect position reporting for capture streams. Signed-off-by:
Leoni Prodduvaka <leoni.prodduvaka@intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
-
- 17 Jun, 2019 1 commit
-
-
Janusz Krzysztofik authored
McBSP used to work correctly as long as compat DMA probing, removed by commit 642aafea ("ASoC: ti: remove compat dma probing"), was available. New method of DMA probing apparently requires users to provide channel names when registering with SDMA, while McBSP passes NULLs. Fix it. The same probably applies to McASP (not tested), hence the patch fixes both. Fixes: 642aafea ("ASoC: ti: remove compat dma probing") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
- 13 Jun, 2019 5 commits
-
-
Kai Vehmanen authored
In display codecs supported by hdac_hdmi, the connection indices are shared by all converters. At boot and resume from suspend, the connection state may be reset to default values. In case of multiple connected pins (multiple monitors connected with audio capability), routing and mute status of pins that are not connected to any PCM, may interfere with other pins. E.g. after resume from S3 with multiple monitors, unless all converters are in active use, playback to some PCMs may be muted due to the default settings of unrelated converters. Avoid this by ensuring all pin:cvt selections are correct in codec whenever a converter is enabled for playback. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Jerome Brunet authored
The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield, so the test to check if the format is i2s is wrong. Because of this the clock setting may be wrong. For example, the sample clock gets inverted in DSP B mode, when it should not. Fix the lrclk invert helper function Fixes: 1a11d88f ("ASoC: meson: add tdm formatter base driver") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
Right justified format is actually not supported by the amlogic tdm output encoder. Fixes: c41c2a35 ("ASoC: meson: add tdm output driver") Signed-off-by:
-
Jerome Brunet authored
Right justified format is actually not supported by the amlogic tdm input decoder. Fixes: 13a22e6a ("ASoC: meson: add tdm input driver") Signed-off-by:
-
John Hsu authored
There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen. Signed-off-by:
John Hsu <KCHSU0@nuvoton.com> Tested-by:
Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by:
-
- 10 Jun, 2019 2 commits
-
-
Alex Levin authored
When calling kmalloc with GFP_KERNEL in case CONFIG_SLOB is unset, kmem_cache_alloc_trace is called. In case CONFIG_TRACING is set, kmem_cache_alloc_trace will ball slab_alloc, which will call slab_pre_alloc_hook which might_sleep_if. The context in which it is called in this case, the intel_sst_interrupt_mrfld, calling a sleeping kmalloc generates a BUG(): Fixes: 972b0d45 ("ASoC: Intel: remove GFP_ATOMIC, use GFP_KERNEL") [ 20.250671] BUG: sleeping function called from invalid context at mm/slab.h:422 [ 20.250683] in_atomic(): 1, irqs_disabled(): 1, pid: 1791, name: Chrome_IOThread [ 20.250690] CPU: 0 PID: 1791 Comm: Chrome_IOThread Tainted: G W 4.19.43 #61 [ 20.250693] Hardware name: GOOGLE Kefka, BIOS Google_Kefka.7287.337.0 03/02/2017 [ 20.250697] Call Trace: [ 20.250704] <IRQ> [ 20.250716] dump_stack+0x7e/0xc3 [ 20.250725] ___might_sleep+0x12a/0x140 [ 20.250731] kmem_cache_alloc_trace+0x53/0x1c5 [ 20.250736] ? update_cfs_rq_load_avg+0x17e/0x1aa [ 20.250740] ? cpu_load_update+0x6c/0xc2 [ 20.250746] sst_create_ipc_msg+0x2d/0x88 [ 20.250752] intel_sst_interrupt_mrfld+0x12a/0x22c [ 20.250758] __handle_irq_event_percpu+0x133/0x228 [ 20.250764] handle_irq_event_percpu+0x35/0x7a [ 20.250768] handle_irq_event+0x36/0x55 [ 20.250773] handle_fasteoi_irq+0xab/0x16c [ 20.250779] handle_irq+0xd9/0x11e [ 20.250785] do_IRQ+0x54/0xe0 [ 20.250791] common_interrupt+0xf/0xf [ 20.250795] </IRQ> [ 20.250800] RIP: 0010:__lru_cache_add+0x4e/0xad [ 20.250806] Code: 00 01 48 c7 c7 b8 df 01 00 65 48 03 3c 25 28 f1 00 00 48 8b 48 08 48 89 ca 48 ff ca f6 c1 01 48 0f 44 d0 f0 ff 42 34 0f b6 0f <89> ca fe c2 88 17 48 89 44 cf 08 80 fa 0f 74 0e 48 8b 08 66 85 c9 [ 20.250809] RSP: 0000:ffffa568810bfd98 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd6 [ 20.250814] RAX: ffffd3b904eb1940 RBX: ffffd3b904eb1940 RCX: 0000000000000004 [ 20.250817] RDX: ffffd3b904eb1940 RSI: ffffa10ee5c47450 RDI: ffffa10efba1dfb8 [ 20.250821] RBP: ffffa568810bfda8 R08: ffffa10ef9c741c1 R09: dead000000000100 [ 20.250824] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa10ee8d52a40 [ 20.250827] R13: ffffa10ee8d52000 R14: ffffa10ee5c47450 R15: 800000013ac65067 [ 20.250835] lru_cache_add_active_or_unevictable+0x4e/0xb8 [ 20.250841] handle_mm_fault+0xd98/0x10c4 [ 20.250848] __do_page_fault+0x235/0x42d [ 20.250853] ? page_fault+0x8/0x30 [ 20.250858] do_page_fault+0x3d/0x17a [ 20.250862] ? page_fault+0x8/0x30 [ 20.250866] page_fault+0x1e/0x30 [ 20.250872] RIP: 0033:0x7962fdea9304 [ 20.250875] Code: 0f 11 4c 17 f0 c3 48 3b 15 f1 26 31 00 0f 83 e2 00 00 00 48 39 f7 72 0f 74 12 4c 8d 0c 16 4c 39 cf 0f 82 63 01 00 00 48 89 d1 <f3> a4 c3 80 fa 08 73 12 80 fa 04 73 1e 80 fa 01 77 26 72 05 0f b6 [ 20.250879] RSP: 002b:00007962f4db5468 EFLAGS: 00010206 [ 20.250883] RAX: 00003c8cc9d47008 RBX: 0000000000000000 RCX: 0000000000001b48 [ 20.250886] RDX: 0000000000002b40 RSI: 00003c8cc9551000 RDI: 00003c8cc9d48000 [ 20.250890] RBP: 00007962f4db5820 R08: 0000000000000000 R09: 00003c8cc9552b48 [ 20.250893] R10: 0000562dd1064d30 R11: 00003c8cc825b908 R12: 00003c8cc966d3c0 [ 20.250896] R13: 00003c8cc9e280c0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by:
Alex Levin <levinale@chromium.org> Signed-off-by:
-
Ranjani Sridharan authored
Move the client_mutex lock to snd_soc_unbind_card() before removing link components. This prevents the deadlock in the error path in snd_soc_instantiate_card(). Fixes: 34ac3c3e (ASoC: core: lock client_mutex while removing link components) Reported-by:
kernelci.org bot <bot@kernelci.org> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
- 06 Jun, 2019 8 commits
-
-
Amadeusz Sławiński authored
When we call snd_soc_component_set_jack(component, NULL, NULL) we should set rt274->jack to passed jack, so when interrupt is triggered it calls snd_soc_jack_report(rt274->jack, ...) with proper value. This fixes problem in machine where in register, we call snd_soc_register(component, &headset, NULL), which just calls rt274_mic_detect via callback. Now when machine driver is removed "headset" will be gone, so we need to tell codec driver that it's gone with: snd_soc_register(component, NULL, NULL), but we also need to be able to handle NULL jack argument here gracefully. If we don't set it to NULL, next time the rt274_irq runs it will call snd_soc_jack_report with first argument being invalid pointer and there will be Oops. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
-
Amadeusz Sławiński authored
During the integration of HDaudio support, we changed the way in which we get hdev in snd_hdac_ext_bus_device_init() to use one preallocated with devm_kzalloc(), however it still left kfree(hdev) in snd_hdac_ext_bus_device_exit(). It leads to oopses when trying to rmmod and modprobe. Fix it, by just removing kfree call. SOF also uses some of the snd_hdac_ functions for HDAudio support but allocated the memory with kzalloc. A matching fix is provided separately to align all users of the snd_hdac_ library. Fixes: 6298542f ("ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_init") Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Zhu Yingjiang authored
There are already defined ppcap and ppcap interrupt functions, use the already defined functions for easy code read. Fixes: 8a300c8f ("ASoC: SOF: Intel: Add HDA controller for Intel DSP") Reviewed-by:
Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by:
-
Tzung-Bi Shih authored
Kernel crashes when an ASoC component rebinding. The dai_link->platforms has been reset to NULL by soc_cleanup_platform() in soc_cleanup_card_resources() when un-registering component. However, it has no chance to re-allocate the dai_link->platforms when registering the component again. Move the DAI pre-links initiation from snd_soc_register_card() to snd_soc_instantiate_card() to make sure all DAI pre-links get initiated when component rebinding. As an example, by using the following commands: - echo -n max98357a > /sys/bus/platform/drivers/max98357a/unbind - echo -n max98357a > /sys/bus/platform/drivers/max98357a/bind Got the error message: "Unable to handle kernel NULL pointer dereference at virtual address". The call trace: snd_soc_is_matching_component+0x30/0x6c soc_bind_dai_link+0x16c/0x240 snd_soc_bind_card+0x1e4/0xb10 snd_soc_add_component+0x270/0x300 snd_soc_register_component+0x54/0x6c Signed-off-by:
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: f403906d ("ASoC: Intel: cht_bsw_rt5672: platform name fixup support") Signed-off-by:
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: 4506db80 ("ASoC: Intel: cht_bsw_nau8824: platform name fixup support") Signed-off-by:
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: e4bc6b11 ("ASoC: Intel: bytcht_es8316: platform name fixup support") Signed-off-by:
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: 7e7e24d7 ("ASoC: Intel: cht_bsw_max98090_ti: platform name fixup support") Signed-off-by:
-
- 04 Jun, 2019 5 commits
-
-
Marcus Cooper authored
Whilst testing the capture functionality of the i2s on the newer SoCs it was noticed that the recording was somewhat distorted. This was due to the offset not being set correctly on the receiver side. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Marcus Cooper authored
Although not causing any noticeable issues, the mask for the channel offset is covering too many bits. Signed-off-by:
-
Yu-Hsuan Hsu authored
The supported formats are S16_LE and S24_LE now. However, by datasheet of max98090, S24_LE is only supported when it is in the right justified mode. We should remove 24-bit format if it is not in that mode to avoid triggering error. Signed-off-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org> Signed-off-by:
-
YueHaibing authored
Fix gcc build error while CONFIG_I2C is not set sound/soc/codecs/da7219.c:2640:1: warning: data definition has no type or storage class module_i2c_driver(da7219_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/da7219.c:2640:1: error: type defaults to int in declaration of module_i2c_driver [-Werror=implicit-int] sound/soc/codecs/da7219.c:2640:1: warning: parameter names (without types) in function declaration sound/soc/codecs/da7219.c:2629:26: warning: da7219_i2c_driver defined but not used [-Wunused-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 6d817c0e ("ASoC: codecs: Add da7219 codec driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
while building without PCI: sound/soc/sof/intel/hda.o: In function `hda_dsp_probe': hda.c:(.text+0x79c): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' hda.c:(.text+0x7c4): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x7c4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' Reported-by:
-
- 03 Jun, 2019 7 commits
-
-
Kai Vehmanen authored
The definitions for DSP oops structures were not aligned correctly to current FW ABI version 3.6.0, leading to invalid data being printed out to debug logs. Fix the structs and update related platform code accordingly. Signed-off-by:
-
Ranjani Sridharan authored
HDA_DEV_ASOC type codec device refcounts are managed differently from HDA_DEV_LEGACY devices. The refcount is released explicitly in snd_hdac_ext_bus_device_remove() for ASOC type devices. So, remove the put_device() call in snd_hda_codec_dev_free() for such devices to make the refcount balanced. This will prevent the NULL pointer exception when the codec driver is released after the card is freed. Signed-off-by:
-
Slawomir Blauciak authored
Previously the structure used bitfields, which do not guarantee bit ordering. This change makes sure the order is clearly defined. It also renames and repurposes the field for general use. Signed-off-by:
Slawomir Blauciak <slawomir.blauciak@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
We had a couple of misses with ABI changes, e.g. for Xtensa oops information and the integration of sound trigger, before we set-up a formal process to track evolutions. With this patch, the SOF kernel patches are officially aligned with the firmware 3.6 level. Changing this level has no impact on existing users and is fully backwards-compatible. Signed-off-by:
-
Pan Xiuli authored
Add soundwire dai type and update ABI version. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
We missed these two definitions for GDB support and component notifications, they are defined for the SOF firmware. Since they are not used by the kernel so far, we can still add them without any ABI change. Signed-off-by:
-
Kovács Tamás authored
This tablet has an incorrect acpi identifier just like Thinkpad10 tablet, which is why it is trying to load the RT5640 driver instead of the RT5762 driver. The RT5640 driver, on the other hand, checks the hardware ID, so no driver are loaded during boot. This fix resolves to load the RT5672 driver on this tablet during boot. It also provides the correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I would like to thank Pierre-Louis Bossart for helping with this patch. Signed-off-by:
Kovács Tamás <kepszlok@zohomail.eu> Signed-off-by:
-
- 29 May, 2019 1 commit
-
-
Georgii Staroselskii authored
Allwinner DAC seems to have a delay in the Speaker audio routing. When playing a sound for the first time, the sound gets chopped. On a second play the sound is played correctly. After some time (~5s) the issue gets back. This commit seems to be fixing the same issue as bf14da7e but for another codepath. This is the DTS that was used to debug the problem. &codec { allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */ allwinner,audio-routing = "Speaker", "LINEOUT"; status = "okay"; } Signed-off-by:
Georgii Staroselskii <georgii.staroselskii@emlid.com> Reviewed-by:
-
- 28 May, 2019 8 commits
-
-
Zhu Yingjiang authored
re-write hda_init_caps and remove the HDA reset, clean HDA streams and clear interrupt steps in hda_dsp_probe so the HDA init steps will not be called twice if the CONFIG_SND_SOC_SOF_HDA is true. Fixes: 8a300c8f ("ASoC: SOF: Intel: Add HDA controller for Intel DSP") Reviewed-by:
-
Guennadi Liakhovetski authored
Currently on all supported platforms the IPC IRQ thread first signals the sender when an IPC response is received from the DSP, then unmasks the IPC interrupt. Those actions are performed without holding any locks, so the thread can be interrupted between them. IPC timeouts have been observed in such scenarios: if the sender is woken up and it proceeds with sending the next message without unmasking the IPC interrupt, it can miss the next response. This patch takes a spin-lock to prevent the IRQ thread from being preempted at that point. It also makes sure, that the next IPC transmission by the host cannot take place before the IRQ thread has finished updating all the required IPC registers. Fixes: 53e0c72d ("ASoC: SOF: Add support for IPC IO between DSP and Host") Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Keyon Jie authored
The size for the bytes kcontrol should include the abi header, that is, data->size + sizeof(*data), it is also aligned with get method after this change. Fixes: c3078f53 ("ASoC: SOF: Add Sound Open Firmware KControl support") Reviewed-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
If the SOF hw_params() fail, typically with an IPC error thrown by the firmware, the period_elapsed workqueue is not initialized, but we still cancel it in hw_free(), which results in a kernel warning. Move the initialization to the .open callback. Tested on Broadwell (Samus) and IceLake. Fixes: e2803e61 ("ASoC: SOF: PCM: add period_elapsed work to fix race condition in interrupt context") GitHub issue: https://github.com/thesofproject/linux/issues/932Reviewed-by:
-
Libin Yang authored
sof_pcm_hw_params() can only be called once to setup the FW hw_params. So after calling sof_pcm_hw_params(), hw_params_upon_resume flag must be cleared to avoid multiple invoking sof_pcm_hw_params() by prepare. For example, after resume, there is an xrun happened, prepare() will be called. As the hw_params_upon_resume flag is not cleared, sof_pcm_hw_params() will be called and this will cause IPC timeout. This patch fixes such issues. Fixes: 868bd00f ("ASoC: SOF: Add PCM operations support") Reviewed-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In some configurations, it's a requirement to split the probe in two, with a second part handled in a workqueue (e.g. for HDMI support which depends on the DRM modules). SOF already handles these configurations but the error flow is incorrect. When an error occurs in the workqueue, the probe has technically already completed. If we release the resources on errors, this generates kernel oops/use-after-free when the resources are released a second time on module removal. GitHub issue: https://github.com/thesofproject/linux/issues/945 Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
Ranjani Sridharan authored
No need to call snd_soc_unregister_component in case of error because the component device is resource-managed. Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
Ranjani Sridharan authored
snd_sof_remove() disables the DSP and unmaps the DSP BAR. Removing topology after disabling the DSP results in a kernel panic while unloading the pipeline widget. This is because pipeline widget unload attempts to power down the core it is scheduled on by accessing the DSP registers. So, the suggested fix here is to unregister the machine driver first to remove the topology and then disable the DSP to avoid the situation described above. Note that the kernel panic only happens in cases where the HDaudio link is not managed by the hdac library, e.g. no codec or when HDMI is not supported. When the hdac library is used, snd_sof_remove() calls snd_hdac_ext_bus_device_remove() to remove the codec which unregisters the component driver thereby also removing the topology before the DSP is disabled. Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
