Vincent Mailhol says:

====================
net: devlink: return the driver name in devlink_nl_info_fill

The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themselves in
their devlink_ops::info_get callback function.

The goal of this series is to have the devlink core to report this
information instead of the drivers.

The first patch fulfills the actual goal of this series: modify
devlink core to report the driver name and clean-up all drivers. Both
have to be done in an atomic change to avoid attribute
duplication. This same patch also removes the
devlink_info_driver_name_put() function to prevent future drivers from
reporting the driver name themselves.

The second patch allows the core to call devlink_nl_info_fill() even
if the devlink_ops::info_get() callback is NULL. This leads to the
third and final patch which cleans up the drivers which have an empty
info_get().
====================

Link: https://lore.kernel.org/r/20221129095140.3913303-1-mailhol.vincent@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

devlink_ops::info_get() is now optional and devlink will continue to
report information even if that callback gets removed.

Remove all the empty devlink_ops::info_get() callbacks from the
drivers.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Jacob Keller  <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some drivers only reported the driver name in their
devlink_ops::info_get() callback. Now that the core provides this
information, the callback became empty. For such drivers, just
removing the callback would prevent the core from executing
devlink_nl_info_fill() meaning that "devlink dev info" would not
return anything.

Make the callback function optional by executing
devlink_nl_info_fill() even if devlink_ops::info_get() is NULL.

N.B.: the drivers with devlink support which previously did not
implement devlink_ops::info_get() will now also be able to report
the driver name.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Jacob Keller  <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver name is available in device_driver::name. Right now,
drivers still have to report this piece of information themselves in
their devlink_ops::info_get callback function.

In order to factorize code, make devlink_nl_info_fill() add the driver
name attribute.

Now that the core sets the driver name attribute, drivers are not
supposed to call devlink_info_driver_name_put() anymore. Remove
devlink_info_driver_name_put() and clean-up all the drivers using this
function in their callback.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw
Reviewed-by: Jacob Keller  <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The NQ310 is another NFC chip from NXP, document the compatible in the
bindings.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221128173744.833018-1-luca@z3ntu.xyzSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jacob Keller says:

====================
support direct read from region

A long time ago when initially implementing devlink regions in ice I
proposed the ability to allow reading from a region without taking a
snapshot [1]. I eventually dropped this work from the original series due to
size. Then I eventually lost track of submitting this follow up.

This can be useful when interacting with some region that has some
definitive "contents" from which snapshots are made. For example the ice
driver has regions representing the contents of the device flash.

If userspace wants to read the contents today, it must first take a snapshot
and then read from that snapshot. This makes sense if you want to read a
large portion of data or you want to be sure reads are consistently from the
same recording of the flash.

However if user space only wants to read a small chunk, it must first
generate a snapshot of the entire contents, perform a read from the
snapshot, and then delete the snapshot after reading.

For such a use case, a direct read from the region makes more sense. This
can be achieved by allowing the devlink region read command to work without
a snapshot. Instead the portion to be read can be forwarded directly to the
driver via a new .read callback.

This avoids the need to read the entire region contents into memory first
and avoids the software overhead of creating a snapshot and then deleting
it.

This series implements such behavior and hooks up the ice NVM and shadow RAM
regions to allow it.

[1] https://lore.kernel.org/netdev/20200130225913.1671982-1-jacob.e.keller@intel.com/
====================

Link: https://lore.kernel.org/r/20221128203647.1198669-1-jacob.e.keller@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement the .read handler for the NVM and Shadow RAM regions. This
enables user space to read a small chunk of the flash without needing the
overhead of creating a full snapshot.

Update the documentation for ice to detail which regions have direct read
support.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

78ad87da ("ice: devlink: add shadow-ram region to snapshot Shadow RAM")
added support for the 'shadow-ram' devlink region, but did not document it
in the ice devlink documentation. Fix this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ice driver supports a region for both the flat NVM contents as well as
the Shadow RAM which is a layer built on top of the flash during device
initialization.

These regions use an almost identical read function, except that the NVM
needs to set the direct flag when reading, while Shadow RAM needs to read
without the direct flag set. They each call ice_read_flat_nvm with the only
difference being whether to set the direct flash flag.

The NVM region read function also was fixed to read the NVM in blocks to
avoid a situation where the firmware reclaims the lock due to taking too
long.

Note that the region snapshot function takes the ops pointer so the
function can easily determine which region to read. Make use of this and
re-use the NVM snapshot function for both the NVM and Shadow RAM regions.
This makes Shadow RAM benefit from the same block approach as the NVM
region. It also reduces code in the ice driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To read from a region, user space must currently request a new snapshot of
the region and then read from that snapshot. This can sometimes be overkill
if user space only reads a tiny portion. They first create the snapshot,
then request a read, then destroy the snapshot.

For regions which have a single underlying "contents", it makes sense to
allow supporting direct reading of the region data.

Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if
requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set,
then perform a direct read instead of using a snapshot. Direct read is
mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken
to ensure that we reject commands which provide incorrect attributes.

Regions must enable support for direct read by implementing the .read()
callback function. If a region does not support such direct reads, a
suitable extended error message is reported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The devlink_nl_region_read_snapshot_fill is used to copy the contents of
a snapshot into a message for reporting to userspace via the
DEVLINK_CMG_REGION_READ netlink message.

A future change is going to add support for directly reading from
a region. Almost all of the logic for this new capability is identical.

To help reduce code duplication and make this logic more generic,
refactor the function to take a cb and cb_priv pointer for doing the
actual copy.

Add a devlink_region_snapshot_fill implementation that will simply copy
the relevant chunk of the region. This does require allocating some
storage for the chunk as opposed to simply passing the correct address
forward to the devlink_nl_cmg_region_read_chunk_fill function.

A future change to implement support for directly reading from a region
without a snapshot will provide a separate implementation that calls the
newly added devlink region operation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The devlink parameter of the devlink_nl_cmd_region_read_chunk_fill
function is not used. Remove it, to simplify the function signature.

Once removed, it is also obvious that the devlink parameter is not
necessary for the devlink_nl_region_read_snapshot_fill either.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The snapshot pointer is obtained inside of the function
devlink_nl_region_read_snapshot_fill. Simplify this function by locating
the snapshot upfront in devlink_nl_cmd_region_read_dumpit instead. This
aligns with how other netlink attributes are handled, and allows us to
exit slightly earlier if an invalid snapshot ID is provided.

It also allows us to pass the snapshot pointer directly to the
devlink_nl_region_read_snapshot_fill, and remove the now unused attrs
parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Report extended error details in the devlink_nl_cmd_region_read_dumpit()
function, by using the extack structure from the netlink_callback.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The calculation for the data_size in the devlink_nl_read_snapshot_fill
function uses an if statement that is better expressed using the min_t
macro.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently whenever a new rule id is generated, it picks up the next
number bigger than previous id. So it would always be 1, 2, 3, etc.
When the rule with id 1 will be deleted and a new rule will be added,
it will have the id 4 and not id 1.
In theory this can be a problem if at some point a rule will be added
and removed ~0 times. Then no more rules can be added because there
are no more ids.

Change this such that when a new rule is added, search for an empty
rule id starting with value of 1 as value 0 is reserved.

Fixes: c9da1ac1 ("net: microchip: sparx5: Adding initial tc flower support for VCAP API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221128142959.8325-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We know that table_size = table->mem_table.depth * table->mem_table.ways,
so use it instead, it is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5230dabe27f48948a9fd0f50a62e2437b65e6a6e.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This allocation is really spurious.
The size of the bitmap is 'tot_ids' and it is used as such in the driver.

So we could expect something like:
   table->id_bmap = devm_kcalloc(rvu->dev, BITS_TO_LONGS(table->tot_ids),
			         sizeof(long), GFP_KERNEL);

However, when the bitmap is allocated, we allocate:
   BITS_TO_LONGS(table->tot_ids) * table->tot_ids ~=
   table->tot_ids / 32 * table->tot_ids ~=
   table->tot_ids^2 / 32

It is proportional to the square of 'table->tot_ids' which seems to
potentially be big.

Allocate the expected amount of memory, and switch to the bitmap API to
have it more straightforward.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ce2710771939065d68f95d86a27cf7cea7966365.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use devm_bitmap_zalloc() instead of hand-writing it.

This also makes the comment "Allocate bitmap for 32 entry mcam" more
explicit because now 32 is really used in the allocation function, instead
of an obscure 'sizeof(long)'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/24177a9ee7043259448b735263d9cfd6a70e89a4.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use kzalloc() instead of kmalloc()/memset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/60ea220ccf3b61963f7d5a97e3df2c76a5feb837.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When this error message is displayed, we know that the all the bits in the
bitmap are set.

So, bitmap_weight() will return the number of bits of the bitmap, which is
'table->tot_ids'.

It is unlikely that a bit will be cleared between mutex_unlock() and
dev_err(), but, in order to simplify the code and avoid this possibility,
just take 'table->tot_ids'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5ce01c402f86412dc57884ff0994b63f0c5b3871.1669378798.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Test NIC hardware checksum offload:

- Rx + Tx
- IPv4 + IPv6
- TCP + UDP

Optional features:

- zero checksum 0xFFFF
- checksum disable 0x0000
- transport encap headers
- randomization

See file header for detailed comments.

Expected results differ depending on NIC features:

- CHECKSUM_UNNECESSARY vs CHECKSUM_COMPLETE
- NETIF_F_HW_CSUM (csum_start/csum_off) vs NETIF_F_IP(V6)_CSUM
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128140210.553391-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
ipsec-next 2022-11-26

1) Remove redundant variable in esp6.
   From Colin Ian King.

2) Update x->lastused for every packet. It was used only for
   outgoing mobile IPv6 packets, but showed to be usefull
   to check if the a SA is still in use in general.
   From Antony Antony.

3) Remove unused variable in xfrm_byidx_resize.
   From Leon Romanovsky.

4) Finalize extack support for xfrm.
   From Sabrina Dubroca.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
  xfrm: add extack to xfrm_set_spdinfo
  xfrm: add extack to xfrm_alloc_userspi
  xfrm: add extack to xfrm_do_migrate
  xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
  xfrm: add extack to xfrm_del_sa
  xfrm: add extack to xfrm_add_sa_expire
  xfrm: a few coding style clean ups
  xfrm: Remove not-used total variable
  xfrm: update x->lastused for every packet
  esp6: remove redundant variable err
====================

Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Maxime Chevallier says:

====================
net: pcs: altera-tse: simplify and clean-up the driver

This small series does a bit of code cleanup in the altera TSE pcs
driver, removing unused register definitions, handling 1000BaseX speed
configuration correctly according to the datasheet, and making use of
proper poll_timeout helpers.

No functional change is introduced.
====================

Link: https://lore.kernel.org/r/20221125131801.64234-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

remove unused register definitions, left from the split with the
altera-tse mac driver.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Software resets on the TSE PCS don't clear registers, but rather reset
all internal state machines regarding AN, comma detection and
encoding/decoding. Use read_poll_timeout to wait for the reset to clear
instead of manually polling the register.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: MSG_FASTOPEN and TFO listener side support

Before this series, only the initiator of a connection was able to combine
both TCP FastOpen and MPTCP when using TCP_FASTOPEN_CONNECT socket option.

These new patches here add (in theory) the full support of TFO with MPTCP,
which means:

 - MSG_FASTOPEN sendmsg flag support (patch 1/8)
 - TFO support for the listener side (patches 2-5/8)
 - TCP_FASTOPEN socket option (patch 6/8)
 - TCP_FASTOPEN_KEY socket option (patch 7/8)

To support TFO for the server side, a few preparation patches are needed
(patches 2 to 5/8). Some of them were inspired by a previous work from
Benjamin Hesmans.

Note that TFO support with MPTCP has been validated with selftests
(patch 8/8) but also with Packetdrill tests running with a modified
but still very WIP version supporting MPTCP. Both the modified tool
and the tests are available online:

  https://github.com/multipath-tcp/packetdrill/
====================

Link: https://lore.kernel.org/r/20221125222958.958636-1-matthieu.baerts@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch first adds TFO support in mptcp_connect.c.

This can be enabled via a new option: -o MPTFO.

Once enabled, the TCP_FASTOPEN socket option is enabled for the server
side and a sendto() with MSG_FASTOPEN is used instead of a connect() for
the client side.

Note that the first SYN has a limit of bytes it can carry. In other
words, it is allowed to send less data than the provided one. We then
need to track more status info to properly allow the next sendmsg()
starting from the next part of the data to send the rest.

Also in TFO scenarios, we need to completely spool the partially xmitted
buffer -- and account for that -- before starting sendfile/mmap xmit,
otherwise the relevant tests will fail.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The goal of this socket option is to set different keys per listener,
see commit 1fba70e5 ("tcp: socket option to set TCP fast open key")
for more details about this socket option.

The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The TCP_FASTOPEN socket option is one way for the application to tell
the kernel TFO support has to be enabled for the listener socket.

The only thing to do here with MPTCP is to relay the request to the
first subflow like it is already done for the other TCP_FASTOPEN* socket
options.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The send_synack() needs to be overridden for MPTCP to support TFO for
two reasons:

- There is not be enough space in the TCP options if the TFO cookie has
  to be added in the SYN+ACK with other options: MSS (4), SACK OK (2),
  Timestamps (10), Window Scale (3+1), TFO (10+2), MP_CAPABLE (12).
  MPTCPv1 specs -- RFC 8684, section B.1 [1] -- suggest to drop the TCP
  timestamps option in this case.

- The data received in the SYN has to be handled: the SKB can be
  dequeued from the subflow sk and transferred to the MPTCP sk. Counters
  need to be updated accordingly and the application can be notified at
  the end because some bytes have been received.

[1] https://www.rfc-editor.org/rfc/rfc8684.html#section-b.1Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With fastopen in place, the first subflow socket is created before the
MPC handshake completes, and we need to properly initialize the sequence
numbers at MPC ACK reception.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the initial ack sequence is generated on demand whenever
it's requested and the remote key is handy. The relevant code is
scattered in different places and can lead to multiple, unneeded,
crypto operations.

This change consolidates the ack sequence generation code in a single
helper, storing the sequence number at the subflow level.

The above additionally saves a few conditional in fast-path and will
simplify the upcoming fast-open implementation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently in the receive path we don't need to discriminate
between MPC SYN, MPC SYN-ACK and MPC ACK, but soon the fastopen
code will need that info to properly track the fully established
status.

Track the exact MPC suboption type into the receive opt bitmap.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 54f1944e ("mptcp: factor out mptcp_connect()"), all the
infrastructure is now in place to support the MSG_FASTOPEN flag, we
just need to call into the fastopen path in mptcp_sendmsg().
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/lib/bpf/ringbuf.c
  927cbb47 ("libbpf: Handle size overflow for ringbuf mmap")
  b486d19a ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and wifi.

  Current release - new code bugs:

   - eth: mlx5e:
      - use kvfree() in mlx5e_accel_fs_tcp_create()
      - MACsec, fix RX data path 16 RX security channel limit
      - MACsec, fix memory leak when MACsec device is deleted
      - MACsec, fix update Rx secure channel active field
      - MACsec, fix add Rx security association (SA) rule memory leak

  Previous releases - regressions:

   - wifi: cfg80211: don't allow multi-BSSID in S1G

   - stmmac: set MAC's flow control register to reflect current settings

   - eth: mlx5:
      - E-switch, fix duplicate lag creation
      - fix use-after-free when reverting termination table

  Previous releases - always broken:

   - ipv4: fix route deletion when nexthop info is not specified

   - bpf: fix a local storage BPF map bug where the value's spin lock
     field can get initialized incorrectly

   - tipc: re-fetch skb cb after tipc_msg_validate

   - wifi: wilc1000: fix Information Element parsing

   - packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE

   - sctp: fix memory leak in sctp_stream_outq_migrate()

   - can: can327: fix potential skb leak when netdev is down

   - can: add number of missing netdev freeing on error paths

   - aquantia: do not purge addresses when setting the number of rings

   - wwan: iosm:
      - fix incorrect skb length leading to truncated packet
      - fix crash in peek throughput test due to skb UAF"

* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
  MAINTAINERS: Update maintainer list for chelsio drivers
  ionic: update MAINTAINERS entry
  sctp: fix memory leak in sctp_stream_outq_migrate()
  packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
  net/mlx5: Lag, Fix for loop when checking lag
  Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
  net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
  net: tun: Fix use-after-free in tun_detach()
  net: mdiobus: fix unbalanced node reference count
  net: hsr: Fix potential use-after-free
  tipc: re-fetch skb cb after tipc_msg_validate
  mptcp: fix sleep in atomic at close time
  mptcp: don't orphan ssk in mptcp_close()
  dsa: lan9303: Correct stat name
  ipv4: Fix route deletion when nexthop info is not specified
  net: wwan: iosm: fix incorrect skb length
  net: wwan: iosm: fix crash in peek throughput test
  net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
  net: wwan: iosm: fix kernel test robot reported error
  ...

As the nla_nest_start() may fail with NULL returned, the return value
should be checked.

Note that this is not a real bug, nothing will break here.
The next nla_put() will fail as well and we'll bail (and
nla_nest_cancel() can handle NULL). But we keep getting
those "fixes" so whatever.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221129013934.55184-1-yuancan@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.
Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>