- 04 May, 2017 11 commits
-
-
Yan, Zheng authored
If a mds has stopped, close its session and clean up its session requests/caps. The process is similar to handling SESSION_CLOSE initiated by mds. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Yan, Zheng authored
__unregister_session() free the session if it drops the last reference. We should grab an extra reference if we want to use session after __unregister_session(). Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Yan, Zheng authored
mdsmap::m_max_mds is the expected count of active mds. It's not the max rank of active mds. User can decrease mdsmap::m_max_mds, but does not stop mds whose rank >= mdsmap::m_max_mds. Signed-off-by:
-
Yan, Zheng authored
Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Ilya Dryomov authored
Add a readonly, exported to sysfs module parameter so that userspace can generate meaningful error messages. It's a bit funky, but there is no other libceph-specific place. Signed-off-by: -
Ilya Dryomov authored
No reason to hide CephFS-specific features in the rbd case. Recent feature bits mix RADOS and CephFS-specific stuff together anyway. Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
Linus Torvalds authored
-
- 30 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "The final fixes for 4.11: - prevent a triple fault with function graph tracing triggered via suspend to ram - prevent optimizing for size when function graph tracing is enabled and the compiler does not support -mfentry - prevent mwaitx() being called with a zero timeout as mwaitx() might never return. Observed on the new Ryzen CPUs" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Prevent timer value 0 for MWAITX x86/build: convert function graph '-Os' error to warning ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for a cputime accounting regression which got introduced in the 4.11 cycle" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix ksoftirqd cputime accounting regression
-
Janakarajan Natarajan authored
Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 29 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull iov iter fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in ITER_PIPE iov_iter_revert()
-
Al Viro authored
Fixes: 27c0e374Tested-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One odd config build fix for a recent Allwinner clock driver change that got merged. The common code called code in another file that wasn't always built. This just forces it on so people don't run into this bad configuration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: always select CCU_GATE
-
- 28 Apr, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy -
Andreas Kemnade authored
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket. As we did recently in commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(), via a call to skb_condense(). If all frags were freed, then skb->truesize can be recomputed. This call can be done if skb is not yet owned, or destructor is sock_edemux(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket over loopback interface. I believe one issue with looped skbs is that tcp_trim_head() can end up producing skb with under estimated truesize. It hardly matters for normal conditions, since packets sent over loopback are never truncated. Bytes trimmed from skb->head should not change skb truesize, since skb->head is not reallocated. Signed-off-by:
-
Paolo Abeni authored
On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b63 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by:
Norbert P <noe@physik.uzh.ch> Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Steffen Klassert authored
Upper layer GRO handlers can not handle IP fragments, so exit GRO processing in this case. This fixes ESP GRO because the packet must be reassembled before we can decapsulate, otherwise we get authentication failures. It also aligns IPv4 to IPv6 where packets with fragmentation headers are not passed to upper layer GRO handlers. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Arnd Bergmann authored
Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef362 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-28 1) Do garbage collecting after a policy flush to remove old bundles immediately. From Xin Long. 2) Fix GRO if netfilter is not defined. From Sabrina Dubroca. Please pull or let me know if there are problems. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "Yet another quirk to i8042 to get touchpad recognized on some laptops" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo P650RS to the i8042 reset list
-
Arnd Bergmann authored
When the base driver is enabled but all SoC specific drivers are turned off, we now get a build error after code was added to always refer to the clk gates: drivers/clk/built-in.o: In function `ccu_pll_notifier_cb': :(.text+0x154f8): undefined reference to `ccu_gate_helper_disable' :(.text+0x15504): undefined reference to `ccu_gate_helper_enable' This changes the Kconfig to always require the gate code to be built-in when CONFIG_SUNXI_CCU is set. Fixes: 02ae2bc6 ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fix from Chris Mason: "We have one more fix for btrfs. This gets rid of a new WARN_ON from rc1 that ended up making more noise than we really want. The larger fix for the underflow got delayed a bit and it's better for now to put it under CONFIG_BTRFS_DEBUG" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: qgroup: move noisy underflow warning to debugging build
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: fix hanging socket connections This patch series contains fixes for the socket layer to prevent hanging / stale connections. ==================== Signed-off-by: -
Parthasarathy Bhuvaragan authored
When a socket is shutting down, we notify the peer node about the connection termination by reusing an incoming message if possible. If the last received message was a connection acknowledgment message, we reverse this message and set the error code to TIPC_ERR_NO_PORT and send it to peer. In tipc_sk_proto_rcv(), we never check for message errors while processing the connection acknowledgment or probe messages. Thus this message performs the usual flow control accounting and leaves the session hanging. In this commit, we terminate the connection when we receive such error messages. Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, the checks for sockets in CONNECTING state was based on the assumption that the incoming message was always from the peer's accepted data socket. However an application using a non-blocking socket sends an implicit connect, this socket which is in CONNECTING state can receive error messages from the peer's listening socket. As we discard these messages, the application socket hangs as there due to inactivity. In addition to this, there are other places where we process errors but do not notify the user. In this commit, we process such incoming error messages and notify our users about them using sk_state_change(). Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In filter_connect, we use waitqueue_active() to check for any connections to wakeup. But waitqueue_active() is missing memory barriers while accessing the critical sections, leading to inconsistent results. In this commit, we replace this with an SMP safe wq_has_sleeper() using the generic socket callback sk_data_ready(). Signed-off-by:
-
- 27 Apr, 2017 7 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Thanks to Ari Kauppi and Tuomas Haanpää at Synopsis for spotting bugs in our NFSv2/v3 xdr code that could crash the server or leak memory" * tag 'nfsd-4.11-3' of git://linux-nfs.org/~bfields/linux: nfsd: stricter decoding of write-like NFSv2/v3 ops nfsd4: minor NFSv2/v3 write decoding cleanup nfsd: check for oversized NFSv2/v3 arguments
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A fix for a kernel stack overflow bug in ceph setattr code, marked for stable" * tag 'ceph-for-4.11-rc9' of git://github.com/ceph/ceph-client: ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - fix orangefs handling of faults on write() - I'd missed that one back when orangefs was going through review. - readdir counterpart of "9p: cope with bogus responses from server in p9_client_{read,write}" - server might be lying or broken, and we'd better not overrun the kmalloc'ed buffer we are copying the results into. - NFS O_DIRECT read/write can leave iov_iter advanced by too much; that's what had been causing iov_iter_pipe() warnings davej had been seeing. - statx_timestamp.tv_nsec type fix (s32 -> u32). That one really should go in before 4.11. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: change the type of struct statx_timestamp.tv_nsec to unsigned fix nfs O_DIRECT advancing iov_iter too much p9_client_readdir() fix orangefs_bufmap_copy_from_iovec(): fix EFAULT handling -
Michael Kerrisk (man-pages) authored
The change in commit 1e2f82d1 ("statx: Kill fd-with-NULL-path support in favour of AT_EMPTY_PATH") to error on a NULL pathname to statx() is inconsistent. It results in the error EINVAL for a NULL pathname. Other system calls with similar APIs (fchownat(), fstatat(), linkat()), return EFAULT. The solution is simply to remove the EINVAL check. As I already pointed out in [1], user_path_at*() and filename_lookup() will handle the NULL pathname as per the other APIs, to correctly produce the error EFAULT. [1] https://lkml.org/lkml/2017/4/26/561Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sabrina Dubroca authored
In xfrm_input() when called from GRO, async == 0, and we end up skipping the processing in xfrm4_transport_finish(). GRO path will always skip the NF_HOOK, so we don't need the special-case for !NETFILTER during GRO processing. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Frederic Weisbecker authored
irq_time_read() returns the irqtime minus the ksoftirqd time. This is necessary because irq_time_read() is used to substract the IRQ time from the sum_exec_runtime of a task. If we were to include the softirq time of ksoftirqd, this task would substract its own CPU time everytime it updates ksoftirqd->sum_exec_runtime which would therefore never progress. But this behaviour got broken by: a499a5a1 ("sched/cputime: Increment kcpustat directly on irqtime account") ... which now includes ksoftirqd softirq time in the time returned by irq_time_read(). This has resulted in wrong ksoftirqd cputime reported to userspace through /proc/stat and thus "top" not showing ksoftirqd when it should after intense networking load. ksoftirqd->stime happens to be correct but it gets scaled down by sum_exec_runtime through task_cputime_adjusted(). To fix this, just account the strict IRQ time in a separate counter and use it to report the IRQ time. Reported-and-tested-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org>
-
Dmitry V. Levin authored
The comment asserting that the value of struct statx_timestamp.tv_nsec must be negative when statx_timestamp.tv_sec is negative, is wrong, as could be seen from the following example: #define _FILE_OFFSET_BITS 64 #include <assert.h> #include <fcntl.h> #include <stdio.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> #include <linux/stat.h> int main(void) { static const struct timespec ts[2] = { { .tv_nsec = UTIME_OMIT }, { .tv_sec = -2, .tv_nsec = 42 } }; assert(utimensat(AT_FDCWD, ".", ts, 0) == 0); struct stat st; assert(stat(".", &st) == 0); printf("st_mtim.tv_sec = %lld, st_mtim.tv_nsec = %lu\n", (long long) st.st_mtim.tv_sec, (unsigned long) st.st_mtim.tv_nsec); struct statx stx; assert(syscall(__NR_statx, AT_FDCWD, ".", 0, 0, &stx) == 0); printf("stx_mtime.tv_sec = %lld, stx_mtime.tv_nsec = %lu\n", (long long) stx.stx_mtime.tv_sec, (unsigned long) stx.stx_mtime.tv_nsec); return 0; } It expectedly prints: st_mtim.tv_sec = -2, st_mtim.tv_nsec = 42 stx_mtime.tv_sec = -2, stx_mtime.tv_nsec = 42 The more generic comment asserting that the value of struct statx_timestamp.tv_nsec might be negative is confusing to say the least. It contradicts both the struct stat.st_[acm]time_nsec tradition and struct timespec.tv_nsec requirements in utimensat syscall. If statx syscall ever returns a stx_[acm]time containing a negative tv_nsec that cannot be passed unmodified to utimensat syscall, it will cause an immense confusion. Fix this source of confusion by changing the type of struct statx_timestamp.tv_nsec from __s32 to __u32. Fixes: a528d35e ("statx: Add a system call to make enhanced file info available") Signed-off-by:Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David Howells <dhowells@redhat.com> cc: linux-api@vger.kernel.org cc: mtk.manpages@gmail.com Signed-off-by:
-
