- 09 Jun, 2019 40 commits
-
-
Colin Ian King authored
commit 21078203 upstream. Currently in the case where SMB2_ioctl returns the -EOPNOTSUPP error there is a memory leak of pneg_inbuf. Fix this by returning via the out_free_inbuf exit path that will perform the relevant kfree. Addresses-Coverity: ("Resource leak") Fixes: 969ae8e8 ("cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED") CC: Stable <stable@vger.kernel.org> # v5.1+ Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Collier authored
commit a67fedd7 upstream. Commit e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.") moved the retrieval of the transfer buffer from the URB from the top of function hfa384x_usbin_callback to a point after reposting of the URB via a call to submit_rx_urb. The reposting of the URB allocates a new transfer buffer so the new buffer is retrieved instead of the buffer containing the response passed into the callback. This results in failure to initialize the adapter with an error reported in the system log (something like "CTLX[1] error: state(Request failed)"). This change moves the retrieval to just before the point where the URB is reposted so that the correct transfer buffer is retrieved and initialization of the device succeeds. Signed-off-by:
Tim Collier <osdevtc@gmail.com> Fixes: e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit ca641bae upstream. The create_pagelist() "count" parameter comes from the user in vchiq_ioctl() and it could overflow. If you look at how create_page() is called in vchiq_prepare_bulk_data(), then the "size" variable is an int so it doesn't make sense to allow negatives or larger than INT_MAX. I don't know this code terribly well, but I believe that typical values of "count" are typically quite low and I don't think this check will affect normal valid uses at all. The "pagelist_size" calculation can also overflow on 32 bit systems, but not on 64 bit systems. I have added an integer overflow check for that as well. The Raspberry PI doesn't offer the same level of memory protection that x86 does so these sorts of bugs are probably not super critical to fix. Fixes: 71bad7f0 ("staging: add bcm2708 vchiq driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
George G. Davis authored
commit 099506cb upstream. As noted in commit 84b40e3b ("serial: 8250: omap: Disable DMA for console UART"), UART console lines use low-level PIO only access functions which will conflict with use of the line when DMA is enabled, e.g. when the console line is also used for systemd messages. So disable DMA support for UART console lines. Reported-by:
Michael Rodin <mrodin@de.adit-jv.com> Link: https://patchwork.kernel.org/patch/10929511/Tested-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Grzegorz Halat authored
commit a1ad1cc9 upstream. After memory allocation failure vc_allocate() doesn't clean up data which has been initialized in visual_init(). In case of fbcon this leads to divide-by-0 in fbcon_init() on next open of the same tty. memory allocation in vc_allocate() may fail here: 1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL); on next open() fbcon_init() skips vc_font.data initialization: 1088: if (!p->fontdata) { division by zero in fbcon_init() happens here: 1149: new_cols /= vc->vc_font.width; Additional check is needed in fbcon_deinit() to prevent usage of uninitialized vc_screenbuf: 1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf) 1252: set_vc_hi_font(vc, false); Crash: #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4 [exception RIP: fbcon_init+463] RIP: ffffffff814b860f RSP: ffffc90001eafb18 RFLAGS: 00010246 ... #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c #9 [ffffc90001eafbc8] con_install at ffffffff8154f624 ... Signed-off-by:
Grzegorz Halat <ghalat@redhat.com> Reviewed-by:
Oleksandr Natalenko <oleksandr@redhat.com> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peng Fan authored
commit b3fddd5b upstream. To Frac pll, the gate shift is 13, however to Int PLL the gate shift is 11. Cc: <stable@vger.kernel.org> Fixes: ba5625c3 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Jacky Bai <ping.bai@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Roberto Sassu authored
commit 221be106 upstream. This patch prevents memory access beyond the evm_tfm array by checking the validity of the index (hash algorithm) passed to init_desc(). The hash algorithm can be arbitrarily set if the security.ima xattr type is not EVM_XATTR_HMAC. Fixes: 5feeb611 ("evm: Allow non-SHA1 digital signatures") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Roberto Sassu authored
commit 8cdc23a3 upstream. Show the '^' character when a policy rule has flag IMA_INMASK. Fixes: 80eae209 ("IMA: allow reading back the current IMA policy") Signed-off-by:
-
Petr Vorel authored
commit f4001947 upstream. Kernel booted just with ima_policy=tcb (not with ima_policy=appraise_tcb) shouldn't require signed policy. Regression found with LTP test ima_policy.sh. Fixes: c52657d9 ("ima: refactor ima_init_policy()") Cc: stable@vger.kernel.org (linux-5.0) Signed-off-by:
Petr Vorel <pvorel@suse.cz> Signed-off-by:
-
Scott Wood authored
commit 558b523d upstream. Checking efi_enabled(EFI_BOOT) is not sufficient to ensure that EFI runtime services are available, e.g. if efi=noruntime is used. Without this, I get an oops on a PREEMPT_RT kernel where efi=noruntime is the default. Fixes: 399574c6 ("x86/ima: retry detecting secure boot mode") Cc: stable@vger.kernel.org (linux-5.0) Signed-off-by:
Scott Wood <swood@redhat.com> Signed-off-by:
-
Jonathan Corbet authored
commit 096ea522 upstream. Recent versions of sphinx will emit messages like: Documentation/sphinx/kerneldoc.py:103: RemovedInSphinx20Warning: app.warning() is now deprecated. Use sphinx.util.logging instead. Switch to sphinx.util.logging to make this unsightly message go away. Alas, that interface was only added in version 1.6, so we have to add a version check to keep things working with older sphinxes. Cc: stable@vger.kernel.org Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Jonathan Corbet authored
commit 2404dad1 upstream. AutoReporter is going away; recent versions of sphinx emit a warning like: Documentation/sphinx/kerneldoc.py:125: RemovedInSphinx20Warning: AutodocReporter is now deprecated. Use sphinx.util.docutils.switch_source_input() instead. Make the switch. But switch_source_input() only showed up in 1.7, so we have to do ugly version checks to keep things working in older versions. Cc: stable@vger.kernel.org Signed-off-by:
-
Jonathan Corbet authored
commit 3bc80884 upstream. Our version check in Documentation/conf.py never envisioned a world where Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our version check to handle higher version numbers correctly. Cc: stable@vger.kernel.org Signed-off-by:
-
Catalin Marinas authored
commit 00377277 upstream. Following commit 4378a7d4 ("arm64: implement syscall wrappers"), the syscall function names gained the '__arm64_' prefix. Ensure that we have the correct #define for redirecting a default syscall through a wrapper. Fixes: 4378a7d4 ("arm64: implement syscall wrappers") Cc: <stable@vger.kernel.org> # 4.19.x- Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
commit e577c8b6 upstream. When we have holes in a normal memory zone, we could endup having cached_migrate_pfns which may not necessarily be valid, under heavy memory pressure with swapping enabled ( via __reset_isolation_suitable(), triggered by kswapd). Later if we fail to find a page via fast_isolate_freepages(), we may end up using the migrate_pfn we started the search with, as valid page. This could lead to accessing NULL pointer derefernces like below, due to an invalid mem_section pointer. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [47/1825] Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000082f94ae9 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP ... CPU: 10 PID: 6080 Comm: qemu-system-aar Not tainted 510-rc1+ #6 Hardware name: AmpereComputing(R) OSPREY EV-883832-X3-0001/OSPREY, BIOS 4819 09/25/2018 pstate: 60000005 (nZCv daif -PAN -UAO) pc : set_pfnblock_flags_mask+0x58/0xe8 lr : compaction_alloc+0x300/0x950 [...] Process qemu-system-aar (pid: 6080, stack limit = 0x0000000095070da5) Call trace: set_pfnblock_flags_mask+0x58/0xe8 compaction_alloc+0x300/0x950 migrate_pages+0x1a4/0xbb0 compact_zone+0x750/0xde8 compact_zone_order+0xd8/0x118 try_to_compact_pages+0xb4/0x290 __alloc_pages_direct_compact+0x84/0x1e0 __alloc_pages_nodemask+0x5e0/0xe18 alloc_pages_vma+0x1cc/0x210 do_huge_pmd_anonymous_page+0x108/0x7c8 __handle_mm_fault+0xdd4/0x1190 handle_mm_fault+0x114/0x1c0 __get_user_pages+0x198/0x3c0 get_user_pages_unlocked+0xb4/0x1d8 __gfn_to_pfn_memslot+0x12c/0x3b8 gfn_to_pfn_prot+0x4c/0x60 kvm_handle_guest_abort+0x4b0/0xcd8 handle_exit+0x140/0x1b8 kvm_arch_vcpu_ioctl_run+0x260/0x768 kvm_vcpu_ioctl+0x490/0x898 do_vfs_ioctl+0xc4/0x898 ksys_ioctl+0x8c/0xa0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common+0x74/0x118 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Code: f8607840 f100001f 8b011401 9a801020 (f9400400) ---[ end trace af6a35219325a9b6 ]--- The issue was reported on an arm64 server with 128GB with holes in the zone (e.g, [32GB@4GB, 96GB@544GB]), with a swap device enabled, while running 100 KVM guest instances. This patch fixes the issue by ensuring that the page belongs to a valid PFN when we fallback to using the lower limit of the scan range upon failure in fast_isolate_freepages(). Link: http://lkml.kernel.org/r/1558711908-15688-1-git-send-email-suzuki.poulose@arm.com Fixes: 5a811889 ("mm, compaction: use free lists to quickly locate a migration target") Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reported-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Mel Gorman <mgorman@techsingularity.net> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit d76cac67 upstream. I don't think this is userspace visible but SIGKILL does not have any si_codes that use the fault member of the siginfo union. Correct this the simple way and call force_sig instead of force_sig_fault when the signal is SIGKILL. The two know places where synchronous SIGKILL are generated are do_bad_area and fpsimd_save. The call paths to force_sig_fault are: do_bad_area arm64_force_sig_fault force_sig_fault force_signal_inject arm64_notify_die arm64_force_sig_fault force_sig_fault Which means correcting this in arm64_force_sig_fault is enough to ensure the arm64 code is not misusing the generic code, which could lead to maintenance problems later. Cc: stable@vger.kernel.org Cc: Dave Martin <Dave.Martin@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: af40ff68 ("arm64: signal: Ensure si_code is valid for all fault signals") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Zhenliang Wei authored
commit 98af37d6 upstream. In the fixes commit, removing SIGKILL from each thread signal mask and executing "goto fatal" directly will skip the call to "trace_signal_deliver". At this point, the delivery tracking of the SIGKILL signal will be inaccurate. Therefore, we need to add trace_signal_deliver before "goto fatal" after executing sigdelset. Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info. Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com Fixes: cf43a757 ("signal: Restore the stop PTRACE_EVENT_EXIT") Signed-off-by:
Zhenliang Wei <weizhenliang@huawei.com> Reviewed-by:
Christian Brauner <christian@brauner.io> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Ivan Delalande <colona@arista.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
commit 0600597c upstream. When building with -Wuninitialized and CONFIG_KASAN_SW_TAGS unset, Clang warns: mm/kasan/common.c:484:40: warning: variable 'tag' is uninitialized when used here [-Wuninitialized] kasan_unpoison_shadow(set_tag(object, tag), size); ^~~ set_tag ignores tag in this configuration but clang doesn't realize it at this point in its pipeline, as it points to arch_kasan_set_tag as being the point where it is used, which will later be expanded to (void *)(object) without a use of tag. Initialize tag to 0xff, as it removes this warning and doesn't change the meaning of the code. Link: https://github.com/ClangBuiltLinux/linux/issues/465 Link: http://lkml.kernel.org/r/20190502163057.6603-1-natechancellor@gmail.com Fixes: 7f94ffbc ("kasan: add hooks implementation for tag-based mode") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit 3e858996 upstream. We have a single node system with node 0 disabled: Scanning NUMA topology in Northbridge 24 Number of physical nodes 2 Skipping disabled node 0 Node 1 MemBase 0000000000000000 Limit 00000000fbff0000 NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff] This causes crashes in memcg when system boots: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] ... RIP: 0010:list_lru_add+0x94/0x170 ... Call Trace: d_lru_add+0x44/0x50 dput.part.34+0xfc/0x110 __fput+0x108/0x230 task_work_run+0x9f/0xc0 exit_to_usermode_loop+0xf5/0x100 It is reproducible as far as 4.12. I did not try older kernels. You have to have a new enough systemd, e.g. 241 (the reason is unknown -- was not investigated). Cannot be reproduced with systemd 234. The system crashes because the size of lru array is never updated in memcg_update_all_list_lrus and the reads are past the zero-sized array, causing dereferences of random memory. The root cause are list_lru_memcg_aware checks in the list_lru code. The test in list_lru_memcg_aware is broken: it assumes node 0 is always present, but it is not true on some systems as can be seen above. So fix this by avoiding checks on node 0. Remember the memcg-awareness by a bool flag in struct list_lru. Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chris Down authored
commit 9852ae3f upstream. memory.stat and other files already consider subtrees in their output, and we should too in order to not present an inconsistent interface. The current situation is fairly confusing, because people interacting with cgroups expect hierarchical behaviour in the vein of memory.stat, cgroup.events, and other files. For example, this causes confusion when debugging reclaim events under low, as currently these always read "0" at non-leaf memcg nodes, which frequently causes people to misdiagnose breach behaviour. The same confusion applies to other counters in this file when debugging issues. Aggregation is done at write time instead of at read-time since these counters aren't hot (unlike memory.stat which is per-page, so it does it at read time), and it makes sense to bundle this with the file notifications. After this patch, events are propagated up the hierarchy: [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 0 oom 0 oom_kill 0 [root@ktst ~]# systemd-run -p MemoryMax=1 true Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 7 oom 1 oom_kill 1 As this is a change in behaviour, this can be reverted to the old behaviour by mounting with the `memory_localevents' flag set. However, we use the new behaviour by default as there's a lack of evidence that there are any current users of memory.events that would find this change undesirable. akpm: this is a behaviour change, so Cc:stable. THis is so that forthcoming distros which use cgroup v2 are more likely to pick up the revised behaviour. Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.nameSigned-off-by:
Chris Down <chris@chrisdown.name> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
Joe Burmeister authored
commit 5d24f455 upstream. The datasheet states: Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking (crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable clocking Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal oscillator. When using an external clock source at XIN, CrystalEn must be set low. The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not. This was required to make the MAX3107 with an external crystal on our board able to send or receive data. Signed-off-by:
Joe Burmeister <joe.burmeister@devtank.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
commit 61c0e379 upstream. When the tty layer requests the uart to throttle, the current code executing in msm_serial will trigger "Bad mode in Error Handler" and generate an invalid stack frame in pstore before rebooting (that is if pstore is indeed configured: otherwise the user shall just notice a reboot with no further information dumped to the console). This patch replaces the PIO byte accessor with the word accessor already used in PIO mode. Fixes: 68252424 ("tty: serial: msm: Support big-endian CPUs") Cc: stable@vger.kernel.org Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Masahisa Kojima authored
commit ff937890 upstream. master_xfer should return the number of messages successfully processed. Fixes: 0d676a6c ("i2c: add support for Socionext SynQuacer I2C controller") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Okamoto Satoru <okamoto.satoru@socionext.com> Signed-off-by:
Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Vadim Pasternak authored
commit 13067ef7 upstream. Fix wrong order in probing routine initialization - field `base_addr' is used before it's initialized. Move assignment of 'priv->base_addr` to the beginning, prior the call to mlxcpld_i2c_read_comm(). Wrong order caused the first read of capability register to be executed at wrong offset 0x0 instead of 0x2000. By chance it was a "good garbage" at 0x0 offset. Fixes: 313ce648 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
-
Lyude Paul authored
commit 342406e4 upstream. For a while, we've had the problem of i2c bus access not grabbing a runtime PM ref when it's being used in userspace by i2c-dev, resulting in nouveau spamming the kernel log with errors if anything attempts to access the i2c bus while the GPU is in runtime suspend. An example: [ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff Since the GPU is in runtime suspend, the MMIO region that the i2c bus is on isn't accessible. On x86, the standard behavior for accessing an unavailable MMIO region is to just return ~0. Except, that turned out to be a lie. While computers with a clean concious will return ~0 in this scenario, some machines will actually completely hang a CPU on certian bad MMIO accesses. This was witnessed with someone's Lenovo ThinkPad P50, where sensors-detect attempting to access the i2c bus while the GPU was suspended would result in a CPU hang: CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1 Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017 RIP: 0010:ioread32+0x2b/0x30 Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f 40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48 RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13 RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186 RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4 RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7 R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000 R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000 FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: g94_i2c_aux_xfer+0x326/0x850 [nouveau] nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau] __i2c_transfer+0x14b/0x620 i2c_smbus_xfer_emulated+0x159/0x680 ? _raw_spin_unlock_irqrestore+0x1/0x60 ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0 ? __lock_is_held+0x59/0xa0 __i2c_smbus_xfer+0x138/0x5a0 i2c_smbus_xfer+0x4f/0x80 i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev] i2cdev_ioctl+0x1db/0x2c0 [i2c_dev] do_vfs_ioctl+0x408/0x750 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f25317f546b Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003 RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0 R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80 R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0 watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438] Yikes! While I wanted to try to make it so that accessing an i2c bus on nouveau would wake up the GPU as needed, airlied pointed out that pretty much any usecase for userspace accessing an i2c bus on a GPU (mainly for the DDC brightness control that some displays have) is going to only be useful while there's at least one display enabled on the GPU anyway, and the GPU never sleeps while there's displays running. Since teaching the i2c bus to wake up the GPU on userspace accesses is a good deal more difficult than it might seem, mostly due to the fact that we have to use the i2c bus during runtime resume of the GPU, we instead opt for the easiest solution: don't let userspace access i2c busses on the GPU at all while it's in runtime suspend. Changes since v1: * Also disable i2c busses that run over DP AUX Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Thomas Huth authored
commit a86cb413 upstream. KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all architectures. However, on s390x, the amount of usable CPUs is determined during runtime - it is depending on the features of the machine the code is running on. Since we are using the vcpu_id as an index into the SCA structures that are defined by the hardware (see e.g. the sca_add_vcpu() function), it is not only the amount of CPUs that is limited by the hard- ware, but also the range of IDs that we can use. Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too. So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common code into the architecture specific code, and on s390x we have to return the same value here as for KVM_CAP_MAX_VCPUS. This problem has been discovered with the kvm_create_max_vcpus selftest. With this change applied, the selftest now passes on s390x, too. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Thomas Huth <thuth@redhat.com> Message-Id: <20190523164309.13345-9-thuth@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Hui Wang authored
commit 9cb40eb1 upstream. We met another Acer Aspire laptop which has the problem on the headset-mic, the Pin 0x19 is not set the corret configuration for a mic and the pin presence can't be detected too after plugging a headset. Kailang suggested that we should set the coeff to enable the mic and apply the ALC269_FIXUP_LIFEBOOK_EXTMIC. After doing that, both headset-mic presence and headset-mic work well. The existing ALC255_FIXUP_ACER_MIC_NO_PRESENCE set the headset-mic jack to be a phantom jack. Now since the jack can support presence unsol event, let us imporve it to set the jack to be a normal jack. https://bugs.launchpad.net/bugs/1821269 Fixes: 5824ce8d ("ALSA: hda/realtek - Add support for Acer Aspire E5-475 headset mic") Cc: Chris Chiu <chiu@endlessm.com> CC: Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 317d9313 upstream. I measured power consumption between power_save_node=1 and power_save_node=0. It's almost the same. Codec will enter to runtime suspend and suspend. That pin also will enter to D3. Don't need to enter to D3 by single pin. So, Disable power_save_node as default. It will avoid more issues. Windows Driver also has not this option at runtime PM. Signed-off-by:
-
Takashi Iwai authored
commit 0b074ab7 upstream. The current code performs the cancel of a delayed work at the late stage of disconnection procedure, which may lead to the access to the already cleared state. This patch assures to call cancel_delayed_work_sync() at the beginning of the disconnection procedure for avoiding that race. The delayed work object is now assigned in the common line6 object instead of its derivative, so that we can call cancel_delayed_work_sync(). Along with the change, the startup function is called via the new callback instead. This will make it easier to port other LINE6 drivers to use the delayed work for startup in later patches. Reported-by: syzbot+5255458d5e0a2b10bbb9@syzkaller.appspotmail.com Fixes: 7f84ff68 ("ALSA: line6: toneport: Fix broken usage of timer for delayed execution") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Thiago Jung Bauermann authored
commit 8b909e35 upstream. Commit b6664ba4 ("s390, kexec_file: drop arch_kexec_mem_walk()") changed kexec_add_buffer() to skip searching for a memory location if kexec_buf.mem is already set, and use the address that is there. In powerpc code we reuse a kexec_buf variable for loading both the kernel and the initramfs by resetting some of the fields between those uses, but not mem. This causes kexec_add_buffer() to try to load the kernel at the same address where initramfs will be loaded, which is naturally rejected: # kexec -s -l --initrd initramfs vmlinuz kexec_file_load failed: Invalid argument Setting the mem field before every call to kexec_add_buffer() fixes this regression. Fixes: b6664ba4 ("s390, kexec_file: drop arch_kexec_mem_walk()") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ravi Bangoria authored
commit 3202e35e upstream. Consider a scenario where user creates two events: 1st event: attr.sample_type |= PERF_SAMPLE_BRANCH_STACK; attr.branch_sample_type = PERF_SAMPLE_BRANCH_ANY; fd = perf_event_open(attr, 0, 1, -1, 0); This sets cpuhw->bhrb_filter to 0 and returns valid fd. 2nd event: attr.sample_type |= PERF_SAMPLE_BRANCH_STACK; attr.branch_sample_type = PERF_SAMPLE_BRANCH_CALL; fd = perf_event_open(attr, 0, 1, -1, 0); It overrides cpuhw->bhrb_filter to -1 and returns with error. Now if power_pmu_enable() gets called by any path other than power_pmu_add(), ppmu->config_bhrb(-1) will set MMCRA to -1. Fixes: 3925f46b ("powerpc/perf: Enable branch stack sampling framework") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Suraj Jitindar Singh authored
commit d724c9e5 upstream. The sprgs are a set of 4 general purpose sprs provided for software use. SPRG3 is special in that it can also be read from userspace. Thus it is used on linux to store the cpu and numa id of the process to speed up syscall access to this information. This register is overwritten with the guest value on kvm guest entry, and so needs to be restored on exit again. Thus restore the value on the guest exit path in kvmhv_p9_guest_entry(). Cc: stable@vger.kernel.org # v4.20+ Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
commit 1b28d553 upstream. Commit 3309bec8 ("KVM: PPC: Book3S HV: Fix lockdep warning when entering the guest") moved calls to trace_hardirqs_{on,off} in the entry path used for HPT guests. Similar code exists in the new streamlined entry path used for radix guests on POWER9. This makes the same change there, so as to avoid lockdep warnings such as this: [ 228.686461] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 228.686480] WARNING: CPU: 116 PID: 3803 at ../kernel/locking/lockdep.c:4219 check_flags.part.23+0x21c/0x270 [ 228.686544] Modules linked in: vhost_net vhost xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat +xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter +ebtables ip6table_filter ip6_tables iptable_filter fuse kvm_hv kvm at24 ipmi_powernv regmap_i2c ipmi_devintf +uio_pdrv_genirq ofpart ipmi_msghandler uio powernv_flash mtd ibmpowernv opal_prd ip_tables ext4 mbcache jbd2 btrfs +zstd_decompress zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor +raid6_pq raid1 raid0 ses sd_mod enclosure scsi_transport_sas ast i2c_opal i2c_algo_bit drm_kms_helper syscopyarea +sysfillrect sysimgblt fb_sys_fops ttm drm i40e e1000e cxl aacraid tg3 drm_panel_orientation_quirks i2c_core [ 228.686859] CPU: 116 PID: 3803 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc1-xive+ #42 [ 228.686911] NIP: c0000000001b394c LR: c0000000001b3948 CTR: c000000000bfad20 [ 228.686963] REGS: c000200cdb50f570 TRAP: 0700 Not tainted (5.2.0-rc1-xive+) [ 228.687001] MSR: 9000000002823033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 48222222 XER: 20040000 [ 228.687060] CFAR: c000000000116db0 IRQMASK: 1 [ 228.687060] GPR00: c0000000001b3948 c000200cdb50f800 c0000000015e7600 000000000000002e [ 228.687060] GPR04: 0000000000000001 c0000000001c71a0 000000006e655f73 72727563284e4f5f [ 228.687060] GPR08: 0000200e60680000 0000000000000000 c000200cdb486180 0000000000000000 [ 228.687060] GPR12: 0000000000002000 c000200fff61a680 0000000000000000 00007fffb75c0000 [ 228.687060] GPR16: 0000000000000000 0000000000000000 c0000000017d6900 c000000001124900 [ 228.687060] GPR20: 0000000000000074 c008000006916f68 0000000000000074 0000000000000074 [ 228.687060] GPR24: ffffffffffffffff ffffffffffffffff 0000000000000003 c000200d4b600000 [ 228.687060] GPR28: c000000001627e58 c000000001489908 c000000001627e58 c000000002304de0 [ 228.687377] NIP [c0000000001b394c] check_flags.part.23+0x21c/0x270 [ 228.687415] LR [c0000000001b3948] check_flags.part.23+0x218/0x270 [ 228.687466] Call Trace: [ 228.687488] [c000200cdb50f800] [c0000000001b3948] check_flags.part.23+0x218/0x270 (unreliable) [ 228.687542] [c000200cdb50f870] [c0000000001b6548] lock_is_held_type+0x188/0x1c0 [ 228.687595] [c000200cdb50f8d0] [c0000000001d939c] rcu_read_lock_sched_held+0xdc/0x100 [ 228.687646] [c000200cdb50f900] [c0000000001dd704] rcu_note_context_switch+0x304/0x340 [ 228.687701] [c000200cdb50f940] [c0080000068fcc58] kvmhv_run_single_vcpu+0xdb0/0x1120 [kvm_hv] [ 228.687756] [c000200cdb50fa20] [c0080000068fd5b0] kvmppc_vcpu_run_hv+0x5e8/0xe40 [kvm_hv] [ 228.687816] [c000200cdb50faf0] [c0080000071797dc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 228.687863] [c000200cdb50fb10] [c0080000071755dc] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm] [ 228.687916] [c000200cdb50fba0] [c008000007165ccc] kvm_vcpu_ioctl+0x424/0x838 [kvm] [ 228.687957] [c000200cdb50fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0 [ 228.687995] [c000200cdb50fdb0] [c000000000434724] ksys_ioctl+0x104/0x120 [ 228.688033] [c000200cdb50fe00] [c000000000434768] sys_ioctl+0x28/0x80 [ 228.688072] [c000200cdb50fe20] [c00000000000b888] system_call+0x5c/0x70 [ 228.688109] Instruction dump: [ 228.688142] 4bf6342d 60000000 0fe00000 e8010080 7c0803a6 4bfffe60 3c82ff87 3c62ff87 [ 228.688196] 388472d0 3863d738 4bf63405 60000000 <0fe00000> 4bffff4c 3c82ff87 3c62ff87 [ 228.688251] irq event stamp: 205 [ 228.688287] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688344] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688412] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688464] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 [ 228.688513] ---[ end trace eb16f6260022a812 ]--- [ 228.688548] possible reason: unannotated irqs-off. [ 228.688571] irq event stamp: 205 [ 228.688607] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688664] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688719] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688758] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 Cc: stable@vger.kernel.org # v4.20+ Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by:
Cédric Le Goater <clg@kaod.org> Tested-by:
-
Cédric Le Goater authored
commit ef974020 upstream. The passthrough interrupts are defined at the host level and their IRQ data should not be cleared unless specifically deconfigured (shutdown) by the host. They differ from the IPI interrupts which are allocated by the XIVE KVM device and reserved to the guest usage only. This fixes a host crash when destroying a VM in which a PCI adapter was passed-through. In this case, the interrupt is cleared and freed by the KVM device and then shutdown by vfio at the host level. [ 1007.360265] BUG: Kernel NULL pointer dereference at 0x00000d00 [ 1007.360285] Faulting instruction address: 0xc00000000009da34 [ 1007.360296] Oops: Kernel access of bad area, sig: 7 [#1] [ 1007.360303] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV [ 1007.360314] Modules linked in: vhost_net vhost iptable_mangle ipt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc kvm_hv kvm xt_tcpudp iptable_filter squashfs fuse binfmt_misc vmx_crypto ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi nfsd ip_tables x_tables autofs4 btrfs zstd_decompress zstd_compress lzo_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq multipath mlx5_ib ib_uverbs ib_core crc32c_vpmsum mlx5_core [ 1007.360425] CPU: 9 PID: 15576 Comm: CPU 18/KVM Kdump: loaded Not tainted 5.1.0-gad7e7d0ef #4 [ 1007.360454] NIP: c00000000009da34 LR: c00000000009e50c CTR: c00000000009e5d0 [ 1007.360482] REGS: c000007f24ccf330 TRAP: 0300 Not tainted (5.1.0-gad7e7d0ef) [ 1007.360500] MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002484 XER: 00000000 [ 1007.360532] CFAR: c00000000009da10 DAR: 0000000000000d00 DSISR: 00080000 IRQMASK: 1 [ 1007.360532] GPR00: c00000000009e62c c000007f24ccf5c0 c000000001510600 c000007fe7f947c0 [ 1007.360532] GPR04: 0000000000000d00 0000000000000000 0000000000000000 c000005eff02d200 [ 1007.360532] GPR08: 0000000000400000 0000000000000000 0000000000000000 fffffffffffffffd [ 1007.360532] GPR12: c00000000009e5d0 c000007fffff7b00 0000000000000031 000000012c345718 [ 1007.360532] GPR16: 0000000000000000 0000000000000008 0000000000418004 0000000000040100 [ 1007.360532] GPR20: 0000000000000000 0000000008430000 00000000003c0000 0000000000000027 [ 1007.360532] GPR24: 00000000000000ff 0000000000000000 00000000000000ff c000007faa90d98c [ 1007.360532] GPR28: c000007faa90da40 00000000000fe040 ffffffffffffffff c000007fe7f947c0 [ 1007.360689] NIP [c00000000009da34] xive_esb_read+0x34/0x120 [ 1007.360706] LR [c00000000009e50c] xive_do_source_set_mask.part.0+0x2c/0x50 [ 1007.360732] Call Trace: [ 1007.360738] [c000007f24ccf5c0] [c000000000a6383c] snooze_loop+0x15c/0x270 (unreliable) [ 1007.360775] [c000007f24ccf5f0] [c00000000009e62c] xive_irq_shutdown+0x5c/0xe0 [ 1007.360795] [c000007f24ccf630] [c00000000019e4a0] irq_shutdown+0x60/0xe0 [ 1007.360813] [c000007f24ccf660] [c000000000198c44] __free_irq+0x3a4/0x420 [ 1007.360831] [c000007f24ccf700] [c000000000198dc8] free_irq+0x78/0xe0 [ 1007.360849] [c000007f24ccf730] [c00000000096c5a8] vfio_msi_set_vector_signal+0xa8/0x350 [ 1007.360878] [c000007f24ccf7f0] [c00000000096c938] vfio_msi_set_block+0xe8/0x1e0 [ 1007.360899] [c000007f24ccf850] [c00000000096cae0] vfio_msi_disable+0xb0/0x110 [ 1007.360912] [c000007f24ccf8a0] [c00000000096cd04] vfio_pci_set_msi_trigger+0x1c4/0x3d0 [ 1007.360922] [c000007f24ccf910] [c00000000096d910] vfio_pci_set_irqs_ioctl+0xa0/0x170 [ 1007.360941] [c000007f24ccf930] [c00000000096b400] vfio_pci_disable+0x80/0x5e0 [ 1007.360963] [c000007f24ccfa10] [c00000000096b9bc] vfio_pci_release+0x5c/0x90 [ 1007.360991] [c000007f24ccfa40] [c000000000963a9c] vfio_device_fops_release+0x3c/0x70 [ 1007.361012] [c000007f24ccfa70] [c0000000003b5668] __fput+0xc8/0x2b0 [ 1007.361040] [c000007f24ccfac0] [c0000000001409b0] task_work_run+0x140/0x1b0 [ 1007.361059] [c000007f24ccfb20] [c000000000118f8c] do_exit+0x3ac/0xd00 [ 1007.361076] [c000007f24ccfc00] [c0000000001199b0] do_group_exit+0x60/0x100 [ 1007.361094] [c000007f24ccfc40] [c00000000012b514] get_signal+0x1a4/0x8f0 [ 1007.361112] [c000007f24ccfd30] [c000000000021cc8] do_notify_resume+0x1a8/0x430 [ 1007.361141] [c000007f24ccfe20] [c00000000000e444] ret_from_except_lite+0x70/0x74 [ 1007.361159] Instruction dump: [ 1007.361175] 38422c00 e9230000 712a0004 41820010 548a2036 7d442378 78840020 71290020 [ 1007.361194] 4082004c e9230010 7c892214 7c0004ac <e9240000> 0c090000 4c00012c 792a0022 Cc: stable@vger.kernel.org # v4.12+ Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Harald Freudenberger authored
commit 1c2c7029 upstream. This patch fixes a complain about possible sleep during spinlock aquired "BUG: sleeping function called from invalid context at include/crypto/algapi.h:426" for the ctr(aes) and ctr(des) s390 specific ciphers. Instead of using a spinlock this patch introduces a mutex which is save to be held in sleeping context. Please note a deadlock is not possible as mutex_trylock() is used. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Reported-by:
Julian Wiedmann <jwi@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Harald Freudenberger authored
commit bef9f0ba upstream. The current kernel uses improved crypto selftests. These tests showed that the current implementation of gcm-aes-s390 is not able to deal with chunks of output buffers which are not a multiple of 16 bytes. This patch introduces a rework of the gcm aes s390 scatter walk handling which now is able to handle any input and output scatter list chunk sizes correctly. Code has been verified by the crypto selftests, the tcrypt kernel module and additional tests ran via the af_alg interface. Cc: <stable@vger.kernel.org> Reported-by:
Patrick Steuer <steuer@linux.ibm.com> Signed-off-by:
-
Sean Nyekjaer authored
commit e6d12298 upstream. When using the hrtimer iio trigger timestamp isn't updated. If we use iio_get_time_ns it is updated correctly. Fixes: 2a864877 ("iio: adc: ti-ads8688: add trigger and buffer support") Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Tomer Maimon authored
commit 4e63ed6b upstream. Checking if regulator is valid before reading NPCM ADC regulator voltage to avoid system crash in a case the regulator is not valid. Signed-off-by:
Tomer Maimon <tmaimon77@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Vincent Stehlé authored
commit 0db8aa49 upstream. When initializing the priv->data array starting from index 1, there is one less element to consider than when initializing the full array. Fixes: e717f8c6 ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Reviewed-by:
Dan Murphy <dmurphy@ti.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Ruslan Babayev authored
commit 60f22086 upstream. The ds4424_get_value function takes channel number as it's 3rd argument and translates it internally into I2C address using DS4424_DAC_ADDR macro. The caller ds4424_verify_chip was passing an already translated I2C address as its last argument. Signed-off-by:
Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
