- 06 Nov, 2019 11 commits
-
-
Tariq Toukan authored
Add TLS TX counter description for the handshake retransmitted packets that triggers the resync procedure then skip it, going into the regular transmit flow. Fixes: 46a3ea98 ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pan Bian authored
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is incorrect, which may result in a system crash or other security impacts. The expected object to free is *fw_vsc_cfg. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Eric Dumazet authored
Add a couple of READ_ONCE() and WRITE_ONCE() to prevent load-tearing and store-tearing in sock_read_timestamp() and sock_write_timestamp() This might prevent another KCSAN report. Fixes: 3a0ed3e9 ("sock: Make sock->sk_stamp thread-safe") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by:
Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by:
-
Sean Tranchetti authored
During the exit/unregistration process of the RmNet driver, the function rmnet_unregister_real_device() is called to handle freeing the driver's internal state and removing the RX handler on the underlying physical device. However, the order of operations this function performs is wrong and can lead to a use after free of the rmnet_port structure. Before calling netdev_rx_handler_unregister(), this port structure is freed with kfree(). If packets are received on any RmNet devices before synchronize_net() completes, they will attempt to use this already-freed port structure when processing the packet. As such, before cleaning up any other internal state, the RX handler must be unregistered in order to guarantee that no further packets will arrive on the device. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Jakub Kicinski authored
sk_msg_trim() tries to only update curr pointer if it falls into the trimmed region. The logic, however, does not take into the account pointer wrapping that sk_msg_iter_var_prev() does nor (as John points out) the fact that msg->sg is a ring buffer. This means that when the message was trimmed completely, the new curr pointer would have the value of MAX_MSG_FRAGS - 1, which is neither smaller than any other value, nor would it actually be correct. Special case the trimming to 0 length a little bit and rework the comparison between curr and end to take into account wrapping. This bug caused the TLS code to not copy all of the message, if zero copy filled in fewer sg entries than memcopy would need. Big thanks to Alexander Potapenko for the non-KMSAN reproducer. v2: - take into account that msg->sg is a ring buffer (John). Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1) Fixes: d829e9c4 ("tls: convert to generic sk_msg interface") Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com Co-developed-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Dotan Barak authored
The reason for the pre-allocation of one CQE is to enable resizing of the CQ. Fix comment accordingly. Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
Vladimir Sokolovsky <vlad@mellanox.com> Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
-
Florian Fainelli authored
With the DSA core doing the call to dsa_port_disable() we do not need to do that within the driver itself. This could cause an use after free since past dsa_unregister_switch() we should not be accessing any dsa_switch internal structures. Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
John Hurley authored
When a new filter is added to cls_api, the function tcf_chain_tp_insert_unique() looks up the protocol/priority/chain to determine if the tcf_proto is duplicated in the chain's hashtable. It then creates a new entry or continues with an existing one. In cls_flower, this allows the function fl_ht_insert_unque to determine if a filter is a duplicate and reject appropriately, meaning that the duplicate will not be passed to drivers via the offload hooks. However, when a tcf_proto is destroyed it is removed from its chain before a hardware remove hook is hit. This can lead to a race whereby the driver has not received the remove message but duplicate flows can be accepted. This, in turn, can lead to the offload driver receiving incorrect duplicate flows and out of order add/delete messages. Prevent duplicates by utilising an approach suggested by Vlad Buslov. A hash table per block stores each unique chain/protocol/prio being destroyed. This entry is only removed when the full destroy (and hardware offload) has completed. If a new flow is being added with the same identiers as a tc_proto being detroyed, then the add request is replayed until the destroy is complete. Fixes: 8b64678e ("net: sched: refactor tp insert/delete for concurrent execution") Signed-off-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reported-by:
Louis Peens <louis.peens@netronome.com> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Hisilicon network devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Jay Vosburgh authored
Since de77ecd4 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by:
Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by:
Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4 ("bonding: improve link-status update in mii-monitoring") Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-11-02 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 6 day(s) which contain a total of 8 files changed, 35 insertions(+), 9 deletions(-). The main changes are: 1) Fix ppc BPF JIT's tail call implementation by performing a second pass to gather a stable JIT context before opcode emission, from Eric Dumazet. 2) Fix build of BPF samples sys_perf_event_open() usage to compiled out unavailable test_attr__{enabled,open} checks. Also fix potential overflows in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel. 3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian archs like s390x and also improve the test coverage, from Ilya Leoshkevich. ==================== Signed-off-by:
-
- 05 Nov, 2019 4 commits
-
-
Ivan Khoronzhuk authored
Don't swap oper and admin schedules too early, it's not correct and causes crash. Steps to reproduce: 1) tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 \ base-time $SOME_BASE_TIME \ sched-entry S 01 80000 \ sched-entry S 02 15000 \ sched-entry S 04 40000 \ flags 2 2) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 90000 \ sched-entry S 02 20000 \ sched-entry S 04 40000 \ flags 2 3) tc qdisc replace dev eth0 parent root handle 100 taprio \ base-time $SOME_BASE_TIME \ sched-entry S 01 150000 \ sched-entry S 02 200000 \ sched-entry S 04 40000 \ flags 2 Do 2 3 2 .. steps more times if not happens and observe: [ 305.832319] Unable to handle kernel write to read-only memory at virtual address ffff0000087ce7f0 [ 305.910887] CPU: 0 PID: 0 Comm: swapper/0 Not tainted [ 305.919306] Hardware name: Texas Instruments AM654 Base Board (DT) [...] [ 306.017119] x1 : ffff800848031d88 x0 : ffff800848031d80 [ 306.022422] Call trace: [ 306.024866] taprio_free_sched_cb+0x4c/0x98 [ 306.029040] rcu_process_callbacks+0x25c/0x410 [ 306.033476] __do_softirq+0x10c/0x208 [ 306.037132] irq_exit+0xb8/0xc8 [ 306.040267] __handle_domain_irq+0x64/0xb8 [ 306.044352] gic_handle_irq+0x7c/0x178 [ 306.048092] el1_irq+0xb0/0x128 [ 306.051227] arch_cpu_idle+0x10/0x18 [ 306.054795] do_idle+0x120/0x138 [ 306.058015] cpu_startup_entry+0x20/0x28 [ 306.061931] rest_init+0xcc/0xd8 [ 306.065154] start_kernel+0x3bc/0x3e4 [ 306.068810] Code: f2fbd5b7 f2fbd5b6 d503201f f9400422 (f9000662) [ 306.074900] ---[ end trace 96c8e2284a9d9d6e ]--- [ 306.079507] Kernel panic - not syncing: Fatal exception in interrupt [ 306.085847] SMP: stopping secondary CPUs [ 306.089765] Kernel Offset: disabled Try to explain one of the possible crash cases: The "real" admin list is assigned when admin_sched is set to new_admin, it happens after "swap", that assigns to oper_sched NULL. Thus if call qdisc show it can crash. Farther, next second time, when sched list is updated, the admin_sched is not NULL and becomes the oper_sched, previous oper_sched was NULL so just skipped. But then admin_sched is assigned new_admin, but schedules to free previous assigned admin_sched (that already became oper_sched). Farther, next third time, when sched list is updated, while one more swap, oper_sched is not null, but it was happy to be freed already (while prev. admin update), so while try to free oper_sched the kernel panic happens at taprio_free_sched_cb(). So, move the "swap emulation" where it should be according to function comment from code. Fixes: 9c66d156 ("taprio: Add support for hardware offloading") Signed-off-by:Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.4-20191105' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-05 this is a pull request of 33 patches for net/master. In the first patch Wen Yang's patch adds a missing of_node_put() to CAN device infrastructure. Navid Emamdoost's patch for the gs_usb driver fixes a memory leak in the gs_can_open() error path. Johan Hovold provides two patches, one for the mcba_usb, the other for the usb_8dev driver. Both fix a use-after-free after USB-disconnect. Joakim Zhang's patch improves the flexcan driver, the ECC mechanism is now completely disabled instead of masking the interrupts. The next three patches all target the peak_usb driver. Stephane Grosjean's patch fixes a potential out-of-sync while decoding packets, Johan Hovold's patch fixes a slab info leak, Jeroen Hofstee's patch adds missing reporting of bus off recovery events. Followed by three patches for the c_can driver. Kurt Van Dijck's patch fixes detection of potential missing status IRQs, Jeroen Hofstee's patches add a chip reset on open and add missing reporting of bus off recovery events. Appana Durga Kedareswara rao's patch for the xilinx driver fixes the flags field initialization for axi CAN. The next seven patches target the rx-offload helper, they are by me and Jeroen Hofstee. The error handling in case of a queue overflow is fixed removing a memory leak. Further the error handling in case of queue overflow and skb OOM is cleaned up. The next two patches are by me and target the flexcan and ti_hecc driver. In case of a error during can_rx_offload_queue_sorted() the error counters in the drivers are incremented. Jeroen Hofstee provides 6 patches for the ti_hecc driver, which properly stop the device in ifdown, improve the rx-offload support (which hit mainline in v5.4-rc1), and add missing FIFO overflow and state change reporting. The following four patches target the j1939 protocol. Colin Ian King's patch fixes a memory leak in the j1939_sk_errqueue() handling. Three patches by Oleksij Rempel fix a memory leak on socket release and fix the EOMA packet in the transport protocol. Timo Schlüßler's patch fixes a potential race condition in the mcp251x driver on after suspend. The last patch is by Yegor Yefremov and updates the SPDX-License-Identifier to v3.0. ==================== Signed-off-by:
-
Yegor Yefremov authored
The "GPL-2.0" license identifier changed to "GPL-2.0-only" in SPDX v3.0. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Timo Schlüßler authored
In mcp251x_restart_work_handler() the variable to stop the interrupt handler (priv->force_quit) is reset after the chip is restarted and thus a interrupt might occur. This patch fixes the potential race condition by resetting force_quit before enabling interrupts. Signed-off-by:
Timo Schlüßler <schluessler@krause.de> Signed-off-by:
-
- 04 Nov, 2019 25 commits
-
-
Oleksij Rempel authored
We were sending malformed EOMA with total message size set to 0. This issue has been fixed in the previous patch. In this patch a sanity check is added to the RX path and a error message is displayed. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
can: j1939: transport: j1939_session_fresh_new(): make sure EOMA is send with the total message size set We were sending malformed EOMA messageswith total message size set to 0. This patch fixes the bug. Reported-by: https://github.com/linux-can/can-utils/issues/159Signed-off-by:
Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by:
-
Oleksij Rempel authored
Filters array is coped from user space and linked to the j1939 socket. On socket release this memory was not freed. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:
-
Colin Ian King authored
Currently the error return paths do not free skb and this results in a memory leak. Fix this by freeing them before the return. Addresses-Coverity: ("Resource leak") Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
Jeroen Hofstee authored
While the ti_hecc has interrupts to report when the error counters increase to a certain level and which change state it doesn't handle the case that the error counters go down again, so the reported state can actually be wrong. Since there is no interrupt for that, do update state based on the error counters, when the state is not error active and goes down again. Signed-off-by:
Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by:
-
Jeroen Hofstee authored
The HECC_CANES register handles the flags specially, it only updates the flags after a one is written to them. Since the interrupt for frame errors is not enabled an old error can hence been seen when a state interrupt arrives. For example if the device is not connected to the CAN-bus the error warning interrupt will have HECC_CANES indicating there is no ack. The error passive interrupt thereafter will have HECC_CANES flagging that there is a warning level. And if thereafter there is a message successfully send HECC_CANES points to an error passive event, while in reality it became error warning again. In summary, the state is not always reported correctly. So handle the state changes and frame errors separately. The state changes are now based on the interrupt flags and handled directly when they occur. The reporting of the frame errors is still done as before, as a side effect of another interrupt. note: the hecc_clear_bit will do a read, modify, write. So it will not only clear the bit, but also reset all other bits being set as a side affect, hence it is replaced with only clearing the flags. note: The HECC_CANMC_CCR is no longer cleared in the state change interrupt, it is completely unrelated. And use net_ratelimit to make checkpatch happy. Signed-off-by:
-
Jeroen Hofstee authored
When the rx FIFO overflows the ti_hecc would silently drop them since the overwrite protection is enabled for all mailboxes. So disable it for the lowest priority mailbox and return a proper error value when receive message lost is set. Drop the message itself in that case, since it might be partially updated. Signed-off-by:
-
Jeroen Hofstee authored
Release the mailbox after reading it, so it can be reused a bit earlier. Since "can: rx-offload: continue on error" all pending message bits are cleared directly, so remove clearing them in ti_hecc. Suggested-by:
-
Jeroen Hofstee authored
The HECC_CANMIM is set in the xmit path and cleared in the interrupt. Since this is done with a read, modify, write action the register might end up with some more MIM enabled then intended, since it is not protected. That doesn't matter at all, since the tx interrupt disables the mailbox with HECC_CANME (while holding a spinlock). So lets just always keep MIM set. While at it, since the mailbox direction never changes, don't set it every time a message is send, ti_hecc_reset() already sets them to tx. Signed-off-by:
-
Jeroen Hofstee authored
When the interface goes down, the CPK should no longer take an active part in the CAN-bus communication, like sending acks and error frames. So enable configuration mode in ti_hecc_stop, so the CPK is no longer active. When a transceiver switch is present the acks and errors don't make it to the bus, but disabling the CPK then does prevent oddities, like ti_hecc_reset() failing, since the CPK can become bus-off and starts counting the 11 bit recessive bits, which seems to block the reset. It can also cause invalid interrupts and disrupt the CAN-bus, since transmission can be stopped in the middle of a message, by disabling the tranceiver while the CPK is sending. Since the CPK is disabled after normal power on, it is typically only seen when the interface is restarted. Signed-off-by:
-
Marc Kleine-Budde authored
can: ti_hecc: ti_hecc_error(): increase error counters if skb enqueueing via can_rx_offload_queue_sorted() fails The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Signed-off-by: -
Marc Kleine-Budde authored
The call to can_rx_offload_queue_sorted() may fail and return an error (in the current implementation due to resource shortage). The passed skb is consumed. This patch adds incrementing of the appropriate error counters to let the device statistics reflect that there's a problem. Reported-by:
Martin Hundebøll <martin@geanix.com> Signed-off-by:
-
Marc Kleine-Budde authored
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. If the hardware FIFO is empty can_rx_offload_offload_one() will return NULL. In case a CAN frame was read from the hardware, can_rx_offload_offload_one() returns the skb containing it. Without this patch can_rx_offload_irq_offload_fifo() bails out if no skb returned, regardless of the reason. Similar to can_rx_offload_irq_offload_timestamp() in case of a resource shortage the whole FIFO should be discarded, to avoid an IRQ storm and give the system some time to recover. However if the FIFO is empty the loop can be left. With this patch the loop is left in case of empty FIFO, but not on errors. Signed-off-by: -
Jeroen Hofstee authored
In case of a resource shortage, i.e. the rx_offload queue will overflow or a skb fails to be allocated (due to OOM), can_rx_offload_offload_one() will call mailbox_read() to discard the mailbox and return an ERR_PTR. However can_rx_offload_irq_offload_timestamp() bails out in the error case. In case of a resource shortage all mailboxes should be discarded, to avoid an IRQ storm and give the system some time to recover. Since can_rx_offload_irq_offload_timestamp() is typically called from a while loop, all message will eventually be discarded. So let's continue on error instead to discard them directly. Signed-off-by:
-
Marc Kleine-Budde authored
can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate error value in case of errors Before this patch can_rx_offload_offload_one() returns a pointer to a skb containing the read CAN frame or a NULL pointer. However the meaning of the NULL pointer is ambiguous, it can either mean the requested mailbox is empty or there was an error. This patch fixes this situation by returning: - pointer to skb on success - NULL pointer if mailbox is empty - ERR_PTR() in case of an error All users of can_rx_offload_offload_one() have been adopted, no functional change intended. Signed-off-by: -
Marc Kleine-Budde authored
If the rx-offload skb_queue is full or the skb allocation fails (due to OOM), the mailbox contents is discarded. This patch adds the incrementing of the rx_fifo_errors statistics counter. Signed-off-by: -
Marc Kleine-Budde authored
can: rx-offload: can_rx_offload_offload_one(): do not increase the skb_queue beyond skb_queue_len_max The skb_queue is a linked list, holding the skb to be processed in the next NAPI call. Without this patch, the queue length in can_rx_offload_offload_one() is limited to skb_queue_len_max + 1. As the skb_queue is a linked list, no array or other resources are accessed out-of-bound, however this behaviour is counterintuitive. This patch limits the rx-offload skb_queue length to skb_queue_len_max. Fixes: d254586c ("can: rx-offload: Add support for HW fifo based irq offloading") Signed-off-by:
-
Marc Kleine-Budde authored
If the rx-offload skb_queue is full can_rx_offload_queue_tail() will not queue the skb and return with an error. This patch frees the skb in case of a full queue, which brings can_rx_offload_queue_tail() in line with the can_rx_offload_queue_sorted() function, which has been adjusted in the previous patch. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the caller. Fixes: d254586c ("can: rx-offload: Add support for HW fifo based irq offloading") Reported-by:
-
Marc Kleine-Budde authored
If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will not queue the skb and return with an error. None of the callers of this function, issue a kfree_skb() to free the not queued skb. This results in a memory leak. This patch fixes the problem by freeing the skb in case of a full queue. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the callers, as this function might be used in both the rx and tx path. Fixes: 55059f2b ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions") Cc: linux-stable <stable@vger.kernel.org> Cc: Martin Hundebøll <martin@geanix.com> Reported-by:
-
Appana Durga Kedareswara rao authored
AXI CANIP doesn't support tx fifo empty interrupt feature(TXFEMP), update the flags filed in the driver for AXI CAN case accordingly. Fixes: 3281b380 ("can: xilinx_can: Fix flags field initialization for axi can and canps") Reported-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by:
Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Signed-off-by:
-
Jeroen Hofstee authored
While the state is updated when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add that event as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by:
-
Jeroen Hofstee authored
When the CAN interface is closed it the hardwre is put in power down mode, but does not reset the error counters / state. Reset the D_CAN on open, so the reported state and the actual state match. According to [1], the C_CAN module doesn't have the software reset. [1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdfSigned-off-by:
-
Kurt Van Dijck authored
When the status register is read without the status IRQ pending, the chip may not raise the interrupt line for an upcoming status interrupt and the driver may miss a status interrupt. It is critical that the BUSOFF status interrupt is forwarded to the higher layers, since no more interrupts will follow without intervention. Thanks to Wolfgang and Joe for bringing up the first idea. Signed-off-by:
-
Jeroen Hofstee authored
While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by:
-
Johan Hovold authored
Fix a small slab info leak due to a failure to clear the command buffer at allocation. The first 16 bytes of the command buffer are always sent to the device in pcan_usb_send_cmd() even though only the first two may have been initialised in case no argument payload is provided (e.g. when waiting for a response). Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core") Cc: stable <stable@vger.kernel.org> # 3.4 Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
