commit 8c5035df ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.

Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.

Fixes: 8c5035df ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.comSigned-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove the repeat word 'can' from the comments of bio_kmalloc.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Link: https://lore.kernel.org/r/20221006084450.1513-1-wangdeming@inspur.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Add my new email address and remove Revanth
Signed-off-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20221003202511.5124-1-jonathan.derrick@linux.devSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit 4acb8341 ("sbitmap: fix batched wait_cnt accounting")
is a big improvement: without it, I had to revert to before commit
040b83fc ("sbitmap: fix possible io hung due to lost wakeup")
to avoid the high system time and freezes which that had introduced.

Now okay on the NVME laptop, but 4acb8341 is a disaster for heavy
swapping (kernel builds in low memory) on another: soon locking up in
sbitmap_queue_wake_up() (into which __sbq_wake_up() is inlined), cycling
around with waitqueue_active() but wait_cnt 0 .  Here is a backtrace,
showing the common pattern of outer sbitmap_queue_wake_up() interrupted
before setting wait_cnt 0 back to wake_batch (in some cases other CPUs
are idle, in other cases they're spinning for a lock in dd_bio_merge()):

sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag <
__blk_mq_free_request < blk_mq_free_request < __blk_mq_end_request <
scsi_end_request < scsi_io_completion < scsi_finish_command <
scsi_complete < blk_complete_reqs < blk_done_softirq < __do_softirq <
__irq_exit_rcu < irq_exit_rcu < common_interrupt < asm_common_interrupt <
_raw_spin_unlock_irqrestore < __wake_up_common_lock < __wake_up <
sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag <
__blk_mq_free_request < blk_mq_free_request < dd_bio_merge <
blk_mq_sched_bio_merge < blk_mq_attempt_bio_merge < blk_mq_submit_bio <
__submit_bio < submit_bio_noacct_nocheck < submit_bio_noacct <
submit_bio < __swap_writepage < swap_writepage < pageout <
shrink_folio_list < evict_folios < lru_gen_shrink_lruvec <
shrink_lruvec < shrink_node < do_try_to_free_pages < try_to_free_pages <
__alloc_pages_slowpath < __alloc_pages < folio_alloc < vma_alloc_folio <
do_anonymous_page < __handle_mm_fault < handle_mm_fault <
do_user_addr_fault < exc_page_fault < asm_exc_page_fault

See how the process-context sbitmap_queue_wake_up() has been interrupted,
after bringing wait_cnt down to 0 (and in this example, after doing its
wakeups), before advancing wake_index and refilling wake_cnt: an
interrupt-context sbitmap_queue_wake_up() of the same sbq gets stuck.

I have almost no grasp of all the possible sbitmap races, and their
consequences: but __sbq_wake_up() can do nothing useful while wait_cnt 0,
so it is better if sbq_wake_ptr() skips on to the next ws in that case:
which fixes the lockup and shows no adverse consequence for me.

The check for wait_cnt being 0 is obviously racy, and ultimately can lead
to lost wakeups: for example, when there is only a single waitqueue with
waiters.  However, lost wakeups are unlikely to matter in these cases,
and a proper fix requires redesign (and benchmarking) of the batched
wakeup code: so let's plug the hole with this bandaid for now.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/9c2038a7-cdc5-5ee-854c-fbc6168bf16@google.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

There are two places in the block layer at the moment where
blk_mq_plug() helper could be used instead of directly accessing the
plug from struct current. In both these cases, directly accessing the plug
should not have any consequences for zoned devices.

Make the intent explicit by adding comments instead of introducing unwanted
checks with blk_mq_plug() helper.[1]

[1] https://lore.kernel.org/linux-block/f6e54907-1035-2b2c-6387-ed178be05ccb@kernel.dk/Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220929144141.140077-1-p.raghav@samsung.com
[axboe: fixup multi-line comment style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The current implementation of blk_mq_plug() disables plugging for all
operations that involves a transfer to the device as we just check if
the last bit in op_is_write() function.

Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and
REQ_OP_WRITE_ZEROS as they might require a zone lock.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.1

 - handle effects after freeing the request (Keith Busch)
 - copy firmware_rev on each init (Keith Busch)
 - restrict management ioctls to admin (Keith Busch)
 - ensure subsystem reset is single threaded (Keith Busch)
 - report the actual number of tagset maps in nvme-pci (Keith Busch)
 - small fabrics authentication fixups (Christoph Hellwig)
 - add common code for tagset allocation and freeing (Christoph Hellwig)
 - stop using the request_queue in nvmet (Christoph Hellwig)
 - set min_align_mask before calculating max_hw_sectors
   (Rishabh Bhatnagar)
 - send a rediscover uevent when a persistent discovery controller
   reconnects (Sagi Grimberg)
 - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)"

* tag 'nvme-6.1-2022-09-28' of git://git.infradead.org/nvme: (31 commits)
  nvmet: don't look at the request_queue in nvmet_bdev_set_limits
  nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
  nvme: remove nvme_ctrl_init_connect_q
  nvme-loop: use the tagset alloc/free helpers
  nvme-loop: store the generic nvme_ctrl in set->driver_data
  nvme-loop: initialize sqsize later
  nvme-fc: use the tagset alloc/free helpers
  nvme-fc: store the generic nvme_ctrl in set->driver_data
  nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
  nvme-rdma: use the tagset alloc/free helpers
  nvme-rdma: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: use the tagset alloc/free helpers
  nvme-tcp: store the generic nvme_ctrl in set->driver_data
  nvme-tcp: remove the unused queue_size member in nvme_tcp_queue
  nvme: add common helpers to allocate and free tagsets
  nvme-auth: add a MAINTAINERS entry
  nvmet: add helpers to set the result field for connect commands
  nvme: improve the NVME_CONNECT_AUTHREQ* definitions
  nvmet-auth: don't try to cancel a non-initialized work_struct
  nvmet-tcp: remove nvmet_tcp_finish_cmd
  ...

As far as I can tell there is no need for the staged setup in
dasd, so allocate the tagset and the disk with the queue in
dasd_gendisk_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

blkg_conf_prep just creates a new blkg structure, there is no real
need to update the lookup hint which should only be done on a
successful lookup in the I/O path.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220927065425.257876-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

nvmet is a consumer of the block layer and should not directly look at
the request_queue.  Use the bdev_ helpers to retrieve the device limits
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>

nvmet is a consumer of the block layer and should not directly look at
the request_queue.  Just use the NUMA node ID from the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>

The hctx's run_work may be racing with the elevator switch when
reinitializing hardware queues. The queue is merely frozen in this
context, but that only prevents requests from allocating and doesn't
stop the hctx work from running. The work may get an elevator pointer
that's being torn down, and can result in use-after-free errors and
kernel panics (example below). Use the quiesced elevator switch instead,
and make the previous one static since it is now only used locally.

  nvme nvme0: resetting controller
  nvme nvme0: 32/0/0 default/read/poll queues
  BUG: kernel NULL pointer dereference, address: 0000000000000008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0
  Oops: 0000 [#1] SMP PTI
  Workqueue: kblockd blk_mq_run_work_fn
  RIP: 0010:kyber_has_work+0x29/0x70

...

  Call Trace:
   __blk_mq_do_dispatch_sched+0x83/0x2b0
   __blk_mq_sched_dispatch_requests+0x12e/0x170
   blk_mq_sched_dispatch_requests+0x30/0x60
   __blk_mq_run_hw_queue+0x2b/0x50
   process_one_work+0x1ef/0x380
   worker_thread+0x2d/0x3e0
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220927155652.3260724-1-kbusch@fb.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Replace blk_queue_nowait with a bdev_nowait helpers that takes the
block_device given that the I/O submission path should not have to
look into the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Use the common helpers to allocate and free the tagsets.  To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_loop_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Defer initializing the sqsize field from the options until it has been
capped by MAXCMD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Use the common helpers to allocate and free the tagsets.  To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_fc_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>

Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code and use the chance the cleanup
the init_hctx methods a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>

Also update the sqsize field when capping the queue size, and remove the
check a queue size that is larger than sqsize given that sqsize is only
initialized from opts->queue_size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>

Use the common helpers to allocate and free the tagsets.  To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_rdma_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Use the common helpers to allocate and free the tagsets.  To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_tcp_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

->nvme_tcp_queue is not used anywhere, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Add common helpers to allocate and tear down the admin and I/O tag sets,
including the special queues allocated with them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Add Hannes as the nvme-auth maintainer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

The code to set the result field for the admin and I/O connect commands
is not only verbose and duplicated, but also violates the aliasing
rules as it accesses both the u16 and u32 members in the union.

Add a little helper to sort all that out.

Fixes: db1312dd ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Mark them as unsigned so that we don't need extra casts, and define
them relative to cdword0 instead of requiring extra shifts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is
enabled, but authentication is not on a queue.  This is because
nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while
auth_expired_work is only ever initialized if authentication is enabled
for a given controller.

Fix this by calling most of what is nvmet_init_auth unconditionally
when initializing the SQ, and just do the setting of the result
field in the connect command handler.

Fixes: db1312dd ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>

There is only a single call-site of nvmet_tcp_finish_cmd(), this
becomes redundant. Remove nvmet_tcp_finish_cmd() and use the original
function body instead.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

As per NVMe/TCP transport specification ICReq PDU is the first PDU received
by the controller and controller should receive only one ICReq PDU.

If controller receives more than one ICReq PDU then this can be considered
as fatal error.

nvmet-tcp driver does not check for ICReq PDU opcode if queue state is
NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU,
this can result in abnormal behavior.

Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp frees CMD buffers in nvmet_tcp_uninit_data_in_cmds(),
and waits the inflight IO requests in nvmet_sq_destroy(). During wait
the inflight IO requests, the callback nvmet_tcp_queue_response()
is called from backend after IO complete, this leads a typical
Use-After-Free issue like this:

 BUG: kernel NULL pointer dereference, address: 0000000000000008
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 107f80067 P4D 107f80067 PUD 10789e067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 1 PID: 123 Comm: kworker/1:1H Kdump: loaded Tainted: G            E      6.0.0-rc2.bm.1-amd64 #15
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work [nvmet_tcp]
 RIP: 0010:shash_ahash_digest+0x2b/0x110
 Code: 1f 44 00 00 41 57 41 56 41 55 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 08 44 8b 67 30 45 85 e4 74 1c 48 8b 57 38 b8 00 10 00 00 <44> 8b 7a 08 44 29 f8 39 42 0c 0f 46 42 0c 41 39 c4 76 43 48 8b 03
 RSP: 0018:ffffc9000051bdd8 EFLAGS: 00010206
 RAX: 0000000000001000 RBX: ffff888100ab5470 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff888100ab5470 RDI: ffff888100ab5420
 RBP: ffff888100ab5420 R08: ffff8881024d08c8 R09: ffff888103e1b4b8
 R10: 8080808080808080 R11: 0000000000000000 R12: 0000000000001000
 R13: 0000000000000000 R14: ffff88813412bd4c R15: ffff8881024d0800
 FS:  0000000000000000(0000) GS:ffff88883fa40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 0000000104b48000 CR4: 0000000000350ee0
 Call Trace:
  <TASK>
  nvmet_tcp_io_work+0xa52/0xb52 [nvmet_tcp]
  ? __switch_to+0x106/0x420
  process_one_work+0x1ae/0x380
  ? process_one_work+0x380/0x380
  worker_thread+0x30/0x360
  ? process_one_work+0x380/0x380
  kthread+0xe6/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30

Separate nvmet_tcp_uninit_data_in_cmds() into two steps:

  uninit data in cmds                  <- new step 1
  nvmet_sq_destroy();
  cancel_work_sync(&queue->io_work);
  free CMD buffers                     <- new step 2
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We've been reporting 2 maps regardless of whether the module parameter
asked for anything beyond the default queues. A consequence of this
means that blk-mq will reinitialize the all the hardware contexts and io
schedulers on every controller reset when the mapping is exactly the
same as before. This unnecessary overhead is adding several milliseconds
on a reset for environments that don't need it. Report the actual number
of mappings in use.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device.  Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When a discovery controller is disconnected, no AENs will arrive to
notify the host about discovery log change events.

In order to solve this, send a uevent notification when a
persistent discovery controller reconnects. We add a new ctrl
flag NVME_CTRL_STARTED_ONCE that will be set on the first
start, and consecutive calls will find it set, and send the
event to userspace if the controller is a discovery controller.

Upon the event reception, userspace will re-read the discovery
log page and will act upon changes as it sees fit.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We expect to grow a few of these flags for various purposes
so make them a proper enumeration.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The subsystem reset writes to a register, so we have to ensure the
device state is capable of handling that otherwise the driver may access
unmapped registers. Use the state machine to ensure the subsystem reset
doesn't try to write registers on a device already undergoing this type
of reset.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214771Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The passthrough commands already have this restriction, but the other
operations do not. Require the same capabilities for all users as all of
these operations, which include resets and rescans, can be disruptive.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>