- 30 Mar, 2023 1 commit
-
-
Ville Syrjälä authored
Only the PWM output mode of the utility pin is incompatible with DC6/LCPLL disable. Check for that specifically. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6609Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230328164938.8193-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
- 29 Mar, 2023 1 commit
-
-
Stanislav Lisovskiy authored
For obvious reasons, we use compressed bpp instead of pipe bpp for DSC DP SST case. Lets be consistent and use compressed bpp instead of pipe bpp, also in DP MST DSC case. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Fixes: d51f25eb ("drm/i915: Add DSC support to MST path") Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com
-
- 28 Mar, 2023 4 commits
-
-
Jani Nikula authored
Essentially this is a revert of commit d9d54a53 ("drm/i915: Put future HW and their uAPIs under STAGING & BROKEN"). We currently have no users for this config option. The last one was removed in commit 8c26491f ("drm/i915: Kill the fake lmem support"). Drop it altogether; it's easy enough to resurrect if need arises. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230327105330.312131-2-jani.nikula@intel.com
-
Rodrigo Vivi authored
Catch up with 6.3-rc cycle... Signed-off-by: -
Ville Syrjälä authored
Similar to FBC let's expose an debugfs file to control IPS false color. Enabling this provides an immediate visual feedback on whether IPS is working or not. Signed-off-by:
-
Ville Syrjälä authored
IPS is a per-pipe feature, so let's move the debugfs stuff under the crtc directory, and only register it when IPS is actually available. Signed-off-by:
-
- 27 Mar, 2023 3 commits
-
-
Daniel Vetter authored
Merge tag 'drm-rcar-next-20230325' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Miscellaneous fixes and improvements for rcar-du Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230325204922.GD19335@pendragon.ideasonboard.com
-
Vinod Govindapillai authored
Wrong register address is used to read the SAG block time. Fix the register address according to the bspec. Bspec: 64608 Signed-off-by:
-
Vinod Govindapillai authored
Wrong offsets are calculated to read QGV point registers. Fix it to read from the correct registers. Bspec: 64602 Reviewed-by:
-
- 25 Mar, 2023 8 commits
-
-
Dan Carpenter authored
The drmm_encoder_alloc() function returns error pointers. It never returns NULL. Fix the check accordingly. Fixes: 7a1adbd2 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder") Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DORCR register controls the routing of clocks and data between DU channels within a group. For groups that contain a single channel, there's no routing option to control, and some fields of the register are then reserved. On Gen2 those reserved fields are documented as required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D reserved fields must be set to 1. The DU driver initializes the DORCR register in rcar_du_group_setup(), where it ignores the PG1T, DK1S and PG1D, and then configures those fields to the correct value in rcar_du_group_set_routing(). This hasn't been shown to cause any issue, but prevents certifying that the driver complies with the documentation in safety-critical use cases. As there is no reasonable change that the documentation will be updated to clarify that those reserved fields can be written to 0 temporarily before starting the hardware, make sure that the registers are always set to valid values. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
-
Laurent Pinchart authored
The DORCR fields were documented in the R-Car H1 datasheet with 1-based named, and then got renamed to 0-based in Gen2. The 0-based names are used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to make them 0-based, in order to increase readability of the code when comparing it with the documentation. Signed-off-by:
-
Laurent Pinchart authored
When the input to a DU channel comes from a VSP, the DU doesn't perform any blending operation. Select XRGB8888 instead of ARGB8888 to ensure that the corresponding registers don't get written with invalid values. Signed-off-by:
-
Laurent Pinchart authored
The ESCR and OTAR registers are not present in all DU channels on Gen3 SoCs. ESCR only exists in channels that can be routed to an LVDS or DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing those registers for other channels. This replaces the DU gen check, as Gen4 doesn't have LVDS or DPAD outputs. Signed-off-by:
-
Laurent Pinchart authored
On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to the DU, regardless of whether the LVDS output is used or not. When using the DPAD (RGB) output, the DU driver thus enables and disables the LVDS PLL manually, while when using the LVDS output, it lets the LVDS bridge driver handle the PLL configuration internally as part of the atomic enable and disable operations. This causes an issue when using the LVDS output. As bridges are disabled before CRTCs, the current implementation violates the enable/disable sequences documented in the hardware datasheet, which requires the dot clock to be enabled before the CRTC is started and disabled after it gets stopped. Fix the problem by enabling/disabling the LVDS PLL manually from the DU regardless of which output is used, and skipping the PLL handling in the LVDS bridge atomic enable and disable operations. This is however not enough. Disabling the LVDS encoder while leaving the PLL on still results in a vertical blanking wait timeout when disabling the DU. Investigation showed that the culprit is the LVEN bit. For an unclear reason, clearing the bit when disabling the LVDS encoder blocks vertical blanking interrupts. We thus have to delay disabling the whole LVDS encoder, not just disabling the PLL, until the DU is disabled. We could split the LVDS disable sequence by clearing the LVRES bit in the LVDS bridge atomic disable handler, and delaying the rest of the operations, in order to disable the LVDS output at bridge atomic disable time, before stopping the CRTC. This would make the code more complex, without a clear benefit, so keep the implementation simple(r). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
-
Laurent Pinchart authored
To prepare for a rework of the LVDS disable code, which will need to be called from rcar_lvds_pclk_disable(), move the LVDS enable code, currently stored in the __rcar_lvds_atomic_enable() function, to a separate code section separate from bridge operations. It will be then extended with the LVDS disable code. As part of this rework the __rcar_lvds_atomic_enable() function is renamed to rcar_lvds_enable() to more clearly indicate its purpose. No functional change intended. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Laurent Pinchart authored
When disabling the companion bridge in rcar_lvds_atomic_disable(), there's no need to go through the bridge's operations to call .atomic_disable(). Call rcar_lvds_atomic_disable() on the companion directly. Signed-off-by:
-
- 24 Mar, 2023 9 commits
-
-
Ville Syrjälä authored
Currently we have no sane way to forcibly disable SAGV, which makes debugging things a PITA. Manually poking at the pcode mailbox with it's various SAGV/QGV/PSF formats is no fun, and likely to be clobbered by the driver anyway. Let's add a modparam for this. Signed-off-by:
-
Ville Syrjälä authored
All other skl+ universal plane register bit definitions are next to the pipe A register definition. Move the PLANE_BUF_CFG bit definitions there as well. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
Ville Syrjälä authored
Add i915.enable_dpt modparam to allow disabling the DPT usage in hardware via the chicken bit. Useful when debugging potential DPT issues. Quickly smoke tested on ADL. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDaniel Vetter authored
Core Changes: - drm: Add SDP Error Detection Configuration Register (Arun) Driver Changes: - Meteor Lake enabling and fixes (RK, Jose, Madhumitha) - Lock the fbdev obj before vma pin (Tejas) - DSC fixes (Stanislav) - Fixes and clean-up on opregion code (Imre) - More wm/vblank stuff (Ville) - More general display code organization (Jani) - DP Fixes (Stanislav, Ville) - Introduce flags to ignore long HPD and link training issues \ for handling spurious issues on CI (Vinod) - Plane cleanups and extra registers (Ville) - Update audio keepalive clock values (Clint) - Rename find_section to bdb_find_section (Maarten) - DP SDP CRC16 for 128b132b link layer (Arun) - Fix various issues with noarm register writes (Ville) - Fix a few TypeC / MST issues (Imre) - Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj) - Enable HDCP2.x via GSC CS (Suraj) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
drm-misc-next for v6.4-rc1: Core Changes: - Add unit test for xrgb8888 to mono. - Assorted small fixes to format helper selftests. - Assorted documentation updates. - Drop drm_dev_set_unique. - Always use shadow buffer in generic fbdev emulation helpers, and improve error handling. Driver Changes: - Assorted small fixes to malidp, hdlcd, gma500, lima, bridge, rockchip. - Move fbdev in gma500 to use drm_client. - Convert bridge platform callbacks to void return. - Drop leftover from vgem to shmem helper conversion. Signed-off-by:
-
Ville Syrjälä authored
Define the PLANE_CHICKEN register offsets. Signed-off-by:
-
Ville Syrjälä authored
Replace the hand rolled DISPLAY_VER check for a more descriptive HAS_DPT() macro. Will be used on more than one place later. Signed-off-by:
-
Ville Syrjälä authored
If we want to test with DPT disabled on ADL the POT stride remap stuff needs to be disabled. Make it depend on actual DPT usage instead of just assuming it based on the modifier. Signed-off-by:
-
Ville Syrjälä authored
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b6 ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by:
-
- 23 Mar, 2023 6 commits
-
-
Suraj Kandpal authored
MTL uses GSC command streamer i.e gsc cs to send HDCP/PXP commands to GSC f/w. It requires to keep hdcp display driver agnostic to content protection f/w (ME/GSC fw) in the form of i915_hdcp_fw_ops generic ops. Adding HDCP GSC CS interface by leveraging the i915_hdcp_fw_ops generic ops instead of I915_HDCP_COMPONENT as integral part of i915. Adding checks to see if GSC is loaded and proxy is setup --v6 -dont change the license date in same patch series [Jani] -fix the license year {Jani] --v8 -remove stale comment [Ankit] -get headers in alphabetical order [Ankit] -fix hdcp2_supported check [Ankit] --v9 -remove return statement from hdcp_gsc_fini [Ankit] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Suraj Kandpal authored
Add function that takes care of sending command to gsc cs. We start of with allocation of memory for our command intel_hdcp_gsc_message that contains gsc cs memory header as directed in specs followed by the actual payload hdcp message that we want to send. Spec states that we need to poll pending bit of response header around 20 times each try being 50ms apart hence adding that to current gsc_msg_send function Also we use the same function to take care of both sending and receiving hence no separate function to get the response. --v4 -Create common function to fill in gsc_mtl_header [Alan] -define host session bitmask [Alan] --v5 -use i915 directly instead of gt->i915 [Alan] -No need to make fields NULL as we are already using kzalloc [Alan] --v8 -change mechanism to reuse the same memory for one hdcp session[Alan] -fix header ordering -add comments to explain flags and host session mask [Alan] --v9 -remove gem obj from hdcp message as we can use i915_vma_unpin_and_release [Alan] -move hdcp message allocation and deallocation from hdcp2_enable and hdcp2_disable to init and teardown of HDCP [Alan] --v10 -remove unnecessary i915_vma_unpin [Alan] --v11 -fix comment style [Uma] Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Pervin Teres <alan.previn.teres.alexis@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
-
Suraj Kandpal authored
It requires to move intel specific HDCP API structures to i915_hdcp_interface.h from driver/misc/mei/hdcp/mei_hdcp.h so that any content protection fw interfaces can use these structures. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Suraj Kandpal authored
There are more than 1 type of content protection security firmware. Make the name generic %s/_mei_/_ --v3 -Changing names to drop cp_fw to make naming more agnostic[Jani] --v4 -remove header reference in intel_display_core.h [Uma] -fix commit message and prefix drm [Uma] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Anshuman Gupta authored
pre MTL we interact with mei interface to talk to firmware and enable CP but going forward we will talk to gsc cs because of which we are making all names for HDCP helpers and structures generic as either mei or gsc cs maybe used. Change the include/drm/i915_mei_hdcp_interface.h to include/drm/i915_hdcp_interface.h Change the i915_hdcp_interface.h header naming convention to suit generic f/w type. %s/MEI_/HDCP_ %s/mei_dev/hdcp_dev Change structure name Accordingly. %s/i915_hdcp_comp_master/i915_hdcp_master %s/i915_hdcp_component_ops/i915_hdcp_ops --v6 -make each patch build individually [Jani] --v8 -change ME FW to ME/GSC FW [Ankit] -fix formatting issue [Ankit] --v9 -fix commit message and header [Uma] --v10 -rename comp variable [Uma] Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Suraj Kandpal authored
HDCP and PXP will require a common function to allow it to submit commands to the gsc cs. Also adding the gsc mtl header that needs to be added on to the existing payloads of HDCP and PXP. --v4 -Seprate gsc load and heci cmd submission into different functions in different files for better scalability [Alan] -Rename gsc address field [Alan] --v5 -remove extra line is intel_gsc_fw.h [Uma] Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: Suraj Kandpal<suraj.kandpal@intel.com> Reviewed-by:
-
- 22 Mar, 2023 8 commits
-
-
Alfredo Cruz authored
devm_regmap_init_mmio() may return an invalid pointer in case of an error. This patch adds the corresponding IS_ERR check to vop2->map. Signed-off-by:
Alfredo Cruz <alfredo.carlon@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230322224411.15612-1-alfredo.carlon@gmail.com
-
Toby Chen authored
This fixes a use-after-free crash during rmmod. The DRM encoder is embedded inside the larger rockchip_hdmi, which is allocated with the component. The component memory gets freed before the main drm device is destroyed. Fix it by running encoder cleanup before tearing down its container. Signed-off-by:
Toby Chen <tobyc@nvidia.com> [moved encoder cleanup above clk_disable, similar to bind-error-path] Signed-off-by:
-
Tom Rix authored
clang reportes this error drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2322:8: error: variable 'possible_crtcs' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (vp) { ^~ drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2336:36: note: uninitialized use occurs here ret = vop2_plane_init(vop2, win, possible_crtcs); ^~~~~~~~~~~~~~ drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2322:4: note: remove the 'if' if its condition is always true if (vp) { ^~~~~~~~ The else-statement changes the win->type to OVERLAY without setting the possible_crtcs variable. Rework the block, initialize possible_crtcs to 0 to remove the else-statement. Split the else-if-statement out to its own if-statement so the OVERLAY check will catch when the win-type has been changed. Fixes: 368419a2 ("drm/rockchip: vop2: initialize possible_crtcs properly") Signed-off-by:Tom Rix <trix@redhat.com> Acked-by:
Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by:
-
Imre Deak authored
The current way to determine during HW state sanitization if a PHY is connected in the expected way doesn't work in all cases. The check for this considers only the PHY ready/owned state and the initial TC mode which was determined earlier by the TC port HW readout - using the sink's HPD and the same PHY ready/owned states. For instance for an enabled DP-alt/TBT port without the PHY ready/owned flags set the initial mode will be TBT, and this will be regarded as a valid PHY state. However it's possible that the port is actually enabled in DP-alt mode, but for some reason the PHY ownership was not acquired. Make sure the driver can detect invalid PHY states as in the above example by checking the PHY ready/owned state wrt. the PLL type used. This should be the TBT PLL if the PHY is not owned and the MG (non-TBT) PLL if the PHY is owned. v2: Rebased on change passing crtc_state in the previous patch. Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-3-imre.deak@intel.com
-
Imre Deak authored
For clarity factor out the function to determine if there are active links on a TC port. This prepares for the next patch also checking the port's PLL type. While at it pass crtc_state to intel_tc_port_sanitize_mode(), and check hw.active in that, instead of the deprecated crtc->active flag. v2: Check crtc_state->hw.active instead of crtc->active. (Ville) Reviewed-by:
-
Imre Deak authored
Add an encoder hook, which can be called on enabled TC ports to determine if the port uses a TBT or a non-TBT PLL. An upcoming patch will use this to sanity check active TC port's PHY state wrt. the PLL type used by the port. Reviewed-by:
-
Imre Deak authored
Since an HDMI output can only be enabled in legacy mode on TC ports, assume that VBT is wrong and the port is legacy if VBT says the port is non-legacy and has HDMI. If VBT says to enable DP as well leave the non-legacy flag enabled, relying on the flag getting fixed up based on the HPD status during sink detection. v2: Fix the legacy port flag only if DP is not enabled. Reviewed-by:
-
Imre Deak authored
For consistency detect the initial TC mode in the PHY owned state the same way this is done in the not owned state (w/o changing the behavior). While at it, add more details to the PHY state debug print. Signed-off-by:
-
