- 05 Oct, 2014 40 commits
-
-
Takashi Iwai authored
commit ff50479a upstream. Acer Aspire 3830TG with CX20588 codec has a digital built-in mic that has the same problem like many others, the inverted signal in stereo. Apply the same fixup to this machine, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Sakamoto authored
commit 65845f29 upstream. In IEC 61883-6, one data block transfers one event. In ALSA, the event equals one PCM frame, hence one data block transfers one PCM frame. But Dice has a quirk at higher sampling rate (176.4/192.0 kHz) that one data block transfers two PCM frames. Commit 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") moved some codes related to this quirk into Dice driver. But the commit forgot to add arrangements for PCM period interrupts and DMA pointer updates. As a result, Dice driver cannot work correctly at higher sampling rate. This commit adds 'double_pcm_frames' parameter to amdtp structure for this quirk. When this parameter is set, PCM period interrupts and DMA pointer updates occur at double speed than in IEC 61883-6. Reported-by:
Daniel Robbins <drobbins@funtoo.org> Fixes: 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 1033eb5b upstream. The channel mapping is initialized by amdtp_stream_set_parameters(), however Dice driver set it before calling this function. Furthermore, the setting is wrong because the index is the value of array, and vice versa. This commit moves codes for channel mapping after the function and set it correctly. Reported-by:
-
Clemens Ladisch authored
commit ddc64b27 upstream. snd_info_get_line() documents that its last parameter must be one less than the buffer size, but this API design guarantees that (literally) every caller gets it wrong. Just change this parameter to have its obvious meaning. Reported-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Will Deacon authored
commit 27d7ff27 upstream. I'm not sure what I was on when I wrote this, but when iterating over the hardware watchpoint array (hbp_watch_array), our index is off by ARM_MAX_BRP, so we walk off the end of our thread_struct... ... except, a dodgy condition in the loop means that it never executes at all (bp cannot be NULL). This patch fixes the code so that we remove the bp check and use the correct index for accessing the watchpoint structures. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Josef Bacik authored
commit 4ce97dbf upstream. Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 39b5552c upstream. In __ftrace_replace_code(), when converting the call to a nop in a function it needs to compare against the "curr" (current) value of the ftrace ops, and not the "new" one. It currently does not affect x86 which is the only arch to do the trampolines with function graph tracer, but when other archs that do depend on this code implement the function graph trampoline, it can crash. Here's an example when ARM uses the trampolines (in the future): ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4() Modules linked in: omap_rng rng_core ipv6 CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52 [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24) [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94) [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c) [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34) [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4) [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c) [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164) [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c) [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134) [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130) [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc) [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc) [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20) ---[ end trace dc9ce72c5b617d8f ]--- [ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c [ 65.054070] actual: 85:1b:00:eb Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global" Signed-off-by:
-
Fan Du authored
commit 979bbf7b upstream. In block write mode, when encapsulating dma_buffer, first element is 'command', the rest is data buffer, so only copy actual data buffer starting from block[1] with the size indicating by block[0]. Signed-off-by:
Fan Du <fan.du@intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
addy ke authored
commit b4a7bd7a upstream. I2C_CLKDIV register descripted in the previous version of RK3x chip manual is incorrect. Plus 1 is required. The correct formula: - T(SCL_HIGH) = T(PCLK) * (CLKDIVH + 1) * 8 - T(SCL_LOW) = T(PCLK) * (CLKDIVL + 1) * 8 - (SCL Divsor) = 8 * ((CLKDIVL + 1) + (CLKDIVH + 1)) - SCL = PCLK / (CLK Divsor) It will be updated to the latest version of chip manual. Signed-off-by:
Addy Ke <addy.ke@rock-chips.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Sergei Shtylyov authored
commit 938916fb upstream. Bits 8-31 of all registers reflect the value of bits 0-7 on reads and should be 0 on writes, according to the manuals. RCAR_IRQ_ACK_{RECV|SEND} macros have all 1's in bits 8-31, thus going against the manuals, so fix them. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
commit dd318b0d upstream. Sometimes the MNR and MST interrupts happen simultaneously (stop automatically follows NACK, according to the manuals) and in such case the ID_NACK flag isn't set since the MST interrupt handling precedes MNR and all interrupts are cleared and disabled then, so that MNR interrupt is never noticed -- this causes NACK'ed transfers to be falsely reported as successful. Exchanging MNR and MST handlers fixes this issue, however the MNR bit somehow gets set again even after being explicitly cleared, so I decided to completely suppress handling of all disabled interrupts (which is a good thing anyway)... Signed-off-by:
-
Sergei Shtylyov authored
commit 91bfe298 upstream. This reverts commit 150b8be3. The I2C core's per-adapter locks can't protect from IRQs, so the driver still needs a spinlock to protect the register accesses. Signed-off-by:
-
Simon Lindgren authored
commit 6721f28a upstream. There is a race condition in at91_do_twi_xfer when signals arrive. If a signal is recieved while waiting for a transfer to complete wait_for_completion_interruptible_timeout() will return -ERESTARTSYS. This is not handled correctly resulting in interrupts still being enabled and a transfer being in flight when we return. Symptoms include a range of oopses and bus lockups. Oopses can happen when the transfer completes because the interrupt handler will corrupt the stack. If a new transfer is started before the interrupt fires the controller will start a new transfer in the middle of the old one, resulting in confused slaves and a locked bus. To avoid this, use wait_for_completion_io_timeout instead so that we don't have to deal with gracefully shutting down the transfer and disabling the interrupts. Signed-off-by:
Simon Lindgren <simon@aqwary.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Marek Roszko authored
commit 75b81f33 upstream. The driver was not bound checking the received length byte to ensure it was within the the buffer size that is allocated for SMBus blocks. This resulted in buffer overflows whenever an invalid length byte was received. It also failed to ensure the length byte was not zero. If it received zero, it would end up in an infinite loop as the at91_twi_read_next_byte function returned immediately without allowing RHR to be read to clear the RXRDY interrupt. Tested agaisnt a SMBus compliant battery. Signed-off-by:
Marek Roszko <mark.roszko@gmail.com> Acked-by:
-
Chen-Yu Tsai authored
commit 0ce4bc1d upstream. The "clock-frequency" DT property is listed as optional, However, the current code stores the return value of of_property_read_u32 in the return code of mv64xxx_of_config, but then forgets to clear it after setting the default value of "clock-frequency". It is then passed out to the main probe function, resulting in a probe failure when "clock-frequency" is missing. This patch checks and then throws away the return value of of_property_read_u32, instead of storing it and having to clear it afterwards. This issue was discovered after the property was removed from all sunxi DTs. Fixes: 4c730a06 ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
addy ke authored
commit 5da4309f upstream. In rk3x SOC, the I2C controller can receive/transmit up to 32 bytes data in one chunk, so the size of data to be write/read to/from TXDATAx/RXDATAx must be less than or equal 32 bytes at a time. Tested on rk3288-pinky board, elan receive 158 bytes data. Signed-off-by:
Max Schwarz <max.schwarz@online.de> Reviewed-by:
-
Pranavkumar Sawargaonkar authored
commit f6edbbf3 upstream. X-Gene u-boot runs in EL2 mode with MMU enabled hence we might have stale EL2 tlb enteris when we enable EL2 MMU on each host CPU. This can happen on any ARM/ARM64 board running bootloader in Hyp-mode (or EL2-mode) with MMU enabled. This patch ensures that we flush all Hyp-mode (or EL2-mode) TLBs on each host CPU before enabling Hyp-mode (or EL2-mode) MMU. Tested-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by:
Anup Patel <anup.patel@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 05e0127f upstream. The architecture specifies that when the processor wakes up from a WFE or WFI instruction, the instruction is considered complete, however we currrently return to EL1 (or EL0) at the WFI/WFE instruction itself. While most guests may not be affected by this because their local exception handler performs an exception returning setting the event bit or with an interrupt pending, some guests like UEFI will get wedged due this little mishap. Simply skip the instruction when we have completed the emulation. Acked-by:
-
Sudeep Holla authored
commit 3d8afe30 upstream. The arm64 interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. Originally this argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validation against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Commit 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") intended to fix the above mentioned issue but introduced another issue where affinity can be migrated to a wrong CPU due to unconditional copy of cpu_online_mask. As with for arm, solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Also revert the changes done in the commit 601c9421 as it's no longer needed. Tested on Juno platform. Fixes: 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
-
Will Deacon authored
commit eb35bdd7 upstream. Nathan reports that we leak TLS information from the parent context during an exec, as we don't clear the TLS registers when flushing the thread state. This patch updates the flushing code so that we: (1) Unconditionally zero the tpidr_el0 register (since this is fully context switched for native tasks and zeroed for compat tasks) (2) Zero the tp_value state in thread_info before clearing the tpidrr0_el0 register for compat tasks (since this is only writable by the set_tls compat syscall and therefore not fully switched). A missing compiler barrier is also added to the compat set_tls syscall. Acked-by:
Nathan Lynch <Nathan_Lynch@mentor.com> Reported-by:
-
Lothar Waßmann authored
commit fa97d2f7 upstream. The VPU on i.MX53 has two distinct clocks for register access and internal function. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Fixes: fbf970f6 ("ARM: dts: mx53qsb: Enable VPU support") Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
-
Bill Pringlemeir authored
commit 0aa4dcb5 upstream. Previous version had an extra 'fsl' which made the pins not match any entry. The console message, vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \ /soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp is displayed without the fix. The prior version would generally work as u-boot sets the pins properly for sdhc. This change allows Linux sdhc use even if u-boot is built without sdhc support. Signed-off-by:
Bill Pringlemeir <bpringlemeir@nbsps.com> Acked-by:
Stefan Agner <stefan@agner.ch> Fixes: 0517fe6a ("ARM: dts: vf610-twr: Add support for sdhc1") Signed-off-by:
-
Shawn Guo authored
commit 59d05b51 upstream. After the suspend routine running in OCRAM puts DDR into self-refresh, it will access IOMUXC block to float DDR IO for power saving. A TLB missing of IOMUXC base address may happen in this case, and triggers an access to DDR, and thus hangs the system. The failure is discovered by running suspend/resume on a Cubox-i board. Though the issue is not Cubox-i specific, it can be hit the on the board quite easily with the 3.15 or 3.16 kernel. Fix the issue with a dummy access to IOMUXC block at the beginning of suspend routine, so that the address translation can be filled into TLB before DDR is put into self-refresh. Signed-off-by:
Anson Huang <Anson.Huang@freescale.com> Signed-off-by:
-
Jeff Moyer authored
commit 2ff396be upstream. We ran into a case on ppc64 running mariadb where io_getevents would return zeroed out I/O events. After adding instrumentation, it became clear that there was some missing synchronization between reading the tail pointer and the events themselves. This small patch fixes the problem in testing. Thanks to Zach for helping to look into this, and suggesting the fix. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Benjamin LaHaise authored
commit d856f32a upstream. As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request leak when events are reaped by userspace") introduces a regression when user code attempts to perform io_submit() with more events than are available in the ring buffer. Reverting that commit would reintroduce a regression when user space event reaping is used. Fixing this bug is a bit more involved than the previous attempts to fix this regression. Since we do not have a single point at which we can count events as being reaped by user space and io_getevents(), we have to track event completion by looking at the number of events left in the event ring. So long as there are as many events in the ring buffer as there have been completion events generate, we cannot call put_reqs_available(). The code to check for this is now placed in refill_reqs_available(). A test program from Dan and modified by me for verifying this bug is available at http://www.kvack.org/~bcrl/20140824-aio_bug.c . Reported-by:
Dan Aloni <dan@kernelim.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Anton Blanchard authored
commit cbd52281 upstream. Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Geert Uytterhoeven authored
commit d717ea73 upstream. If pwm_get() finds a look-up entry with a perfect match (both dev_id and con_id match), the loop is aborted, and "p" still points to the correct struct pwm_lookup. If only an entry with a matching dev_id or con_id is found, the loop terminates after traversing the whole list, and "p" now points to arbitrary memory, not part of the pwm_lookup list. Then pwm_set_period() and pwm_set_polarity() will set random values for period resp. polarity. To fix this, save period and polarity when finding a new best match, just like is done for chip (for the provider) and index. This fixes the LCD backlight on r8a7740/armadillo-legacy, which was fed period 0 and polarity -1068821144 instead of 33333 resp. 1. Fixes: 3796ce1d ("pwm: add period and polarity to struct pwm_lookup") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Murali Karicheri authored
commit c5edfff9 upstream. Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
James Ralston authored
commit 1b071a09 upstream. This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Arjun Sreedharan authored
commit 4dc7c76c upstream. scc_bus_softreset not necessarily should return zero. Propagate the error code. Signed-off-by:
Arjun Sreedharan <arjun024@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit 2a13772a upstream. Crucial M550 may cause data corruption on queued trims and is blacklisted. The pattern used for it fails to match 1TB one as the capacity section will be four chars instead of three. Widen the pattern. Signed-off-by:
Charles Reiss <woggling@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81071Signed-off-by:
-
Florian Fainelli authored
commit a9ecdc0f upstream. In case the Device Tree blob passed by the boot agent supplies both an 'interrupts-extended' and an 'interrupts' property in order to allow for older kernels to be usable, prefer the new-style 'interrupts-extended' property which conveys a lot more information. This allows us to have bootloaders willingly maintaining backwards compatibility with older kernels without entirely deprecating the 'interrupts' property. Update the bindings documentation to describe a situation where both the 'interrupts-extended' and the 'interrupts' property are present, and which one takes precedence over the other. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
-
Al Cooper authored
commit b5f2a8c0 upstream. __reserved_mem_reserve_reg() won't reserve memory if the base address is zero. This change removes the check for a base address of zero and allows it to be reserved. Allowing the first 4K of memory to be reserved will help solve a problem on some ARM systems where the the first 16K of memory is unused and becomes allocable memory. This will prevent this memory from being used for DMA by drivers like the USB OHCI driver which consider a physical address of zero to be illegal. Signed-off-by:
Al Cooper <alcooperx@gmail.com> Signed-off-by:
-
Chris Wilson authored
commit 2a92d5bc upstream. We currently see random GPU hangs when using RCS flips with multiple pipes on Ivybridge. Now that we have mmio flips, we can fairly cheaply fallback to using CPU driven flips instead. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77104Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Jiri Kosina authored
commit ece4a17d upstream. Withtout this, ring initialization fails reliabily during resume with [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head ffffff8804 tail 00000000 start 000e4000 This is not a complete fix, but it is verified to make the ring initialization failures during resume much less likely. We were not able to root-cause this bug (likely HW-specific to Gen4 chips) yet. This is therefore used as a ducttape before problem is fully understood and proper fix created, so that people don't suffer from completely unusable systems in the meantime. The discussion and debugging is happening at https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rafael Barbalho authored
commit ed3b6679 upstream. This particular nasty presented itself while trying to register the intelfb device (intel_fbdev.c). During the process of registering the device the driver will disable the crtc via i9xx_crtc_disable. These will also disable the panel using the generic mipi panel functions in dsi_mod_vbt_generic.c. The stale MIPI generic data sequence pointers would cause a crash within those functions. However, all of this is happening while console_lock is held from do_register_framebuffer inside fbcon.c. Which means that you got kernel log and just the device appearing to reboot/hang for no apparent reason. The fault started from the FB_EVENT_FB_REGISTERED event using the fb_notifier_call_chain call in fbcon.c. This regression has been introduced in commit d3b542fc Author: Shobhit Kumar <shobhit.kumar@intel.com> Date: Mon Apr 14 11:00:34 2014 +0530 drm/i915: Add parsing support for new MIPI blocks in VBT Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by:
Rafael Barbalho <rafael.barbalho@intel.com> Reviewed-by:
Shobhit Kumar <shobhit.kumar@intel.com> [danvet: Add regression citation.] Signed-off-by:
-
Alex Deucher authored
commit 3c64bd26 upstream. Return 2 so we can be sure the kernel has the necessary changes for acceleration to work. Note: This patch depends on these two commits: - drm/radeon: fix cut and paste issue for hawaii. - drm/radeon: use packet2 for nop on hawaii with old firmware Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Andreas Boll <andreas.boll.dev@gmail.com> Signed-off-by:
-
Alex Deucher authored
commit e9f274b2 upstream. Some hawaii boards use a different method for fetching the voltage information from the vbios. Signed-off-by:
-
Christian König authored
commit f1d2a26b upstream. Seems to make VM flushes more stable on SI and CIK. v2: only use the PFP on the GFX ring on CIK Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5dc35532 upstream. Looks like the lm63 driver supports the lm64 as well. Signed-off-by:
-
