- 22 Mar, 2023 6 commits
-
-
Menna Mahmoud authored
Convert `dvobj_to_dev` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
Menna Mahmoud <eng.mennamahmoud.mm@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230319201134.253839-1-eng.mennamahmoud.mm@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Menna Mahmoud authored
Convert `iface_to_hdm` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
-
Menna Mahmoud authored
Convert `to_hdm` macro into a static inline function. it is not great to have macro that use `container_of` macro, because from looking at the definition one cannot tell what type it applies to. One can get the same benefit from an efficiency point of view by making an inline function. Suggested-by:
-
Philipp Hortmann authored
Remove unused variable rtl819XAGCTAB_Array. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/0733800b195d4f63cce2ef2ac114943c8c30f587.1679077522.git.philipp.g.hortmann@gmail.comSigned-off-by:
-
Khadija Kamran authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the first parameter right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by:Khadija Kamran <kamrankhadijadj@gmail.com> Link: https://lore.kernel.org/r/ZBhNOkQbG4ygNF98@khadija-virtual-machineSigned-off-by:
-
Sumitra Sharma authored
The coding style used to limit lines to 80 characters, which led to splitting of these function headers into multiple lines and ends the first line with a '('. Such splits causes checks reported by the checkpatch. Place the function parameters of each function immediately after '(' in a single line to align the function headers. Signed-off-by:Sumitra Sharma <sumitraartsy@gmail.com> Link: https://lore.kernel.org/r/20230319164520.GA125117@sumitra.comSigned-off-by:
-
- 17 Mar, 2023 5 commits
-
-
Sumitra Sharma authored
Since the coding style limited the code to 80 columns per line which caused splitting the function header into two lines resulted in the first line ending with a '('. This caused the checkpatch error. Place the function parameters immediately after '(' in a single line to align the function header. Signed-off-by: -
Khadija Kamran authored
Initialize the module parameters, read_timeout and write_timeout once in init(). Module parameters can only be set once and cannot be modified later, so we don't need to evaluate them again when passing the parameters to wait_event_interruptible_timeout(). Convert datatype of {read,write}_timeout from 'int' to 'long int' because implicit conversion of 'long int' to 'int' in statement '{read,write}_timeout = MAX_SCHEDULE_TIMEOUT' results in an overflow. Change format specifier for {read,write}_timeout from %i to %li. Reviewed-by:Fabio M. De Francesco <fmdefrancesco@gmail.com> Suggested-by:
-
Michael Straube authored
The function bb_power_save_mode_off() is not used anywhere, remove it. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230317065041.16635-3-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
The function bb_power_save_mode_on() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function vnt_get_current_tsf() is not used anywhere, remove it. Signed-off-by:
-
- 16 Mar, 2023 29 commits
-
-
Sumitra Sharma authored
Add tabs/spaces in conditional statements in to fix the indentation. Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/20230314121152.GA38979@sumitra.comSigned-off-by:
-
Michael Straube authored
The function dm_shadow_init() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function rtl8192_SetRFPowerState() is not used anywhere, remove it. Signed-off-by:
-
Archana authored
It's cleaner to set "j = -1;" before the if block and remove the else statement. Signed-off-by:
Archana <craechal@gmail.com> Reviewed-by:
-
Archana authored
It is cleaner to use "goto free_result;" as is being followed in rest of the implementation of writeimage function, and remove unnecessary kfree statements. Signed-off-by:
-
Menna Mahmoud authored
Remove unnecessary blank lines before a close brace as reported by checkpatch script "CHECK: Blank lines aren't necessary before a close brace '}'" Signed-off-by:
-
Menna Mahmoud authored
Add a space before and after the operator, for readability. Reported by checkpatch script: " CHECK: spaces preferred around that '+', '<<' and '>>' ". Signed-off-by:
-
Michael Straube authored
The function rtw_get_raw_rssi_info() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function linked_info_dump() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function isAllSpaceOrTab() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function ParseQualifiedString() is not used anywhere, remove it. Signed-off-by:
-
Michael Straube authored
The function MapCharToHexDigit() is not used anywhere, remove it. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XPHY_REG_1T2RArray with Rtl8192PciEPHY_REG_1T2RArray to RTL8192E_PHY_REG_1T2R_ARR to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XAGCTAB_Array with Rtl8192PciEAGCTAB_Array to RTL8192E_AGCTAB_ARR to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XRadioB_Array with Rtl8192PciERadioB_Array to RTL8192E_RADIO_B_ARR to improve readability. Fix spaces around '+' to improve coding style. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XRadioA_Array with Rtl8192PciERadioA_Array to RTL8192E_RADIO_A_ARR to improve readability. Fix spaces around '+' to improve coding style. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XMACPHY_Array with Rtl8192PciEMACPHY_Array to RTL8192E_MACPHY_ARR to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants Rtl819XMACPHY_Array_PG with Rtl8192PciEMACPHY_Array_PG to RTL8192E_MACPHY_ARR_PG to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants PHY_REG_1T2RArrayLength with PHY_REG_1T2RArrayLengthPciE to RTL8192E_PHY_REG_1T2R_ARR_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants MACPHY_Array_PGLength with MACPHY_Array_PGLengthPciE to RTL8192E_MACPHY_ARR_PG_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants RadioB_ArrayLength with RadioB_ArrayLengthPciE to RTL8192E_RADIO_B_ARR_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants RadioA_ArrayLength with RadioA_ArrayLengthPciE to RTL8192E_RADIO_A_ARR_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants MACPHY_ArrayLength with MACPHY_ArrayLengthPciE to RTL8192E_MACPHY_ARR_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Join constants AGCTAB_ArrayLength with AGCTAB_ArrayLengthPciE to RTL8192E_AGCTAB_ARR_LEN to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove function rtl92e_is_legal_rf_path that will always return 1. Reason is that the eRFPath is always 0 for RF90_PATH_A or 1 for RF90_PATH_B but never 2 or 3. In most usage cases this is easy to see but for the following functions that use rtl92e_is_legal_rf_path it is more difficult: rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in: rtl92e_set_bandwidth (eRFPath only for 0 and 1) rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1) _rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0) rtl92e_check_bb_and_rf is used in: rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_bb_config_para_file (eRFPath only for 0) rtl92e_config_rf_path is used in: rtl92e_config_rf (eRFPath only for 0 and 1) Remove dead code. Signed-off-by:
-
Philipp Hortmann authored
Replace RF90_PATH_C in test expression of the for loop with the variable that is commonly used. This avoids false hits when searching for usage of RF90_PATH_C and therefore improves readability. Signed-off-by:
-
Philipp Hortmann authored
Remove unused priv->phy_reg_def[RF90_PATH_C].rfHSSIPara2 and priv->phy_reg_def[RF90_PATH_D].rfHSSIPara2. rfHSSIPara2 is used in rtl92e_set_bb_reg which is used in: rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_phy_rf_read which is used in: rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in: rtl92e_set_bandwidth (eRFPath only for 0 and 1) rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1) _rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0) rtl92e_check_bb_and_rf is used in: rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_bb_config_para_file (eRFPath only for 0) rtl92e_config_rf_path is used in: rtl92e_config_rf (eRFPath only for 0 and 1) Remove dead code and constants. Signed-off-by:
-
Philipp Hortmann authored
Remove unused priv->phy_reg_def[RF90_PATH_C].rfLSSIReadBack and priv->phy_reg_def[RF90_PATH_D].rfLSSIReadBack. rfLSSIReadBack is used in: _rtl92e_phy_rf_read which is used in: rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in: rtl92e_set_bandwidth (eRFPath only for 0 and 1) rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1) _rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0) rtl92e_check_bb_and_rf is used in: rtl92e_config_rf (eRFPath only for 0 and 1) _rtl92e_bb_config_para_file (eRFPath only for 0) rtl92e_config_rf_path is used in: rtl92e_config_rf (eRFPath only for 0 and 1) Remove dead code and constants. Signed-off-by:
-
Philipp Hortmann authored
Remove unused variable rfTxIQImbalance and rfTxAFE because they are just once set and not used. Remove unused constants. Signed-off-by:
-
