- 19 May, 2023 9 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== tls: rx: strp: fix inline crypto offload The local strparser version I added to TLS does not preserve decryption status, which breaks inline crypto (NIC offload). ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
When receive buffer is small, or the TCP rx queue looks too complicated to bother using it directly - we allocate a new skb and copy data into it. We already use sk->sk_allocation... but nothing actually sets it to GFP_ATOMIC on the ->sk_data_ready() path. Users of HW offload are far more likely to experience problems due to scheduling while atomic. "Copy mode" is very rarely triggered with SW crypto. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
Shai Amiram <samiram@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Jakub Kicinski authored
When receive buffer is small we try to copy out the data from TCP into a skb maintained by TLS to prevent connection from stalling. Unfortunately if a single record is made up of a mix of decrypted and non-decrypted skbs combining them into a single skb leads to loss of decryption status, resulting in decryption errors or data corruption. Similarly when trying to use TCP receive queue directly we need to make sure that all the skbs within the record have the same status. If we don't the mixed status will be detected correctly but we'll CoW the anchor, again collapsing it into a single paged skb without decrypted status preserved. So the "fixup" code will not know which parts of skb to re-encrypt. Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
We'll need to copy input skbs individually in the next patch. Factor that code out (without assuming we're copying a full record). Tested-by:
-
Jakub Kicinski authored
We call tls_rx_msg_size(skb) before doing skb->len += chunk. So the tls_rx_msg_size() code will see old skb->len, most likely leading to an over-read. Worst case we will over read an entire record, next iteration will try to trim the skb but may end up turning frag len negative or discarding the subsequent record (since we already told TCP we've read it during previous read but now we'll trim it out of the skb). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
If a record is partially decrypted we'll have to CoW it, anyway, so go into copy mode and allocate a writable skb right away. This will make subsequent fix simpler because we won't have to teach tls_strp_msg_make_copy() how to copy skbs while preserving decrypt status. Tested-by:
-
Jakub Kicinski authored
alloc_skb_with_frags() fills in page frag sizes but does not set skb->len and skb->data_len. Set those correctly otherwise device offload will most likely generate an empty skb and hit the BUG() at the end of __skb_nsg(). Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser") Tested-by:
-
Jakub Kicinski authored
skb->len covers the entire skb, including the frag_list. In fact we're guaranteed that rxm->full_len <= skb->len, so since the change under Fixes we were not checking decrypt status of any skb but the first. Note that the skb_pagelen() added here may feel a bit costly, but it's removed by subsequent fixes, anyway. Reported-by:
Tariq Toukan <tariqt@nvidia.com> Fixes: 86b259f6 ("tls: rx: device: bound the frag walk") Tested-by:
-
Tudor Ambarus authored
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/Signed-off-by:Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by:
-
- 18 May, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm, bluetooth and netfilter. Current release - regressions: - ipv6: fix RCU splat in ipv6_route_seq_show() - wifi: iwlwifi: disable RFI feature Previous releases - regressions: - tcp: fix possible sk_priority leak in tcp_v4_send_reset() - tipc: do not update mtu if msg_max is too small in mtu negotiation - netfilter: fix null deref on element insertion - devlink: change per-devlink netdev notifier to static one - phylink: fix ksettings_set() ethtool call - wifi: mac80211: fortify the spinlock against deadlock by interrupt - wifi: brcmfmac: check for probe() id argument being NULL - eth: ice: - fix undersized tx_flags variable - fix ice VF reset during iavf initialization - eth: hns3: fix sending pfc frames after reset issue Previous releases - always broken: - xfrm: release all offloaded policy memory - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment() - vsock: avoid to close connected socket after the timeout - dsa: rzn1-a5psw: enable management frames for CPU port - eth: virtio_net: fix error unwinding of XDP initialization - eth: tun: fix memory leak for detached NAPI queue. Misc: - MAINTAINERS: sctp: move Neil to CREDITS" * tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) MAINTAINERS: skip CCing netdev for Bluetooth patches mdio_bus: unhide mdio_bus_init prototype bridge: always declare tunnel functions atm: hide unused procfs functions net: isa: include net/Space.h Revert "ARM: dts: stm32: add CAN support on stm32f746" netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT net: wwan: t7xx: Ensure init is completed before system sleep net: selftests: Fix optstring net: pcs: xpcs: fix C73 AN not getting enabled net: wwan: iosm: fix NULL pointer dereference when removing device vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() mailmap: add entries for Nikolay Aleksandrov igb: fix bit_shift to be in [1..8] range net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset cassini: Fix a memory leak in the error handling path of cas_init_one() tun: Fix memory leak for detached NAPI queue. can: kvaser_pciefd: Disable interrupts in probe error path ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Several fixes for the dvb core and drivers: - fix UAF and null pointer de-reference in DVB core - fix kernel runtime warning for blocking operation in wait_event*() in dvb core - fix write size bug in DVB conditional access core - fix dvb demux continuity counter debug check logic - randconfig build fixes in pvrusb2 and mn88443x - fix memory leak in ttusb-dec - fix netup_unidvb probe-time error check logic - improve error handling in dw2102 if it can't retrieve DVB MAC address" * tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221 media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*() media: dvb-core: Fix use-after-free due to race at dvb_register_device() media: dvb-core: Fix use-after-free due on race condition at dvb_net media: dvb-core: Fix use-after-free on race condition at dvb_frontend media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb() media: dvb_ca_en50221: fix a size write bug media: netup_unidvb: fix irq init by register it at the end of probe media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer() media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer() media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer() media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer() media: netup_unidvb: fix use-after-free at del_timer() media: dvb_demux: fix a bug for the continuity counter media: pvrusb2: fix DVB_CORE dependency -
Paolo Abeni authored
Merge tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-05-18 this is a pull request of 7 patches for net/master. The first 6 patches are by Jimmy Assarsson and fix several bugs in the kvaser_pciefd driver. The latest patch is from me and reverts a change in stm32f746.dtsi that causes build errors due to a missing dependent patch. * tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: Revert "ARM: dts: stm32: add CAN support on stm32f746" can: kvaser_pciefd: Disable interrupts in probe error path can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt can: kvaser_pciefd: Empty SRB buffer in probe can: kvaser_pciefd: Call request_irq() before enabling interrupts can: kvaser_pciefd: Clear listen-only bit if not explicitly requested can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop() ==================== Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Florian Westphal says: ==================== Netfilter fixes for net 1. Silence warning about unused variable when CONFIG_NF_NAT=n, from Tom Rix. 2. nftables: Fix possible out-of-bounds access, from myself. 3. nftables: fix null deref+UAF during element insertion into rbtree, also from myself. * tag 'nf-23-05-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT ==================== Link: https://lore.kernel.org/r/20230517123756.7353-1-fw@strlen.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.4 A lot of fixes this time, for both the stack and the drivers. The brcmfmac resume fix has been reported by several people so I would say it's the most important here. The iwlwifi RFI workaround is also something which was reported as a regression recently. * tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits) wifi: b43: fix incorrect __packed annotation wifi: rtw88: sdio: Always use two consecutive bytes for word operations mac80211_hwsim: fix memory leak in hwsim_new_radio_nl wifi: iwlwifi: mvm: Add locking to the rate read flow wifi: iwlwifi: Don't use valid_links to iterate sta links wifi: iwlwifi: mvm: don't trust firmware n_channels wifi: iwlwifi: mvm: fix OEM's name in the tas approved list wifi: iwlwifi: fix OEM's name in the ppag approved list wifi: iwlwifi: mvm: fix initialization of a return value wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id wifi: iwlwifi: fw: fix DBGI dump wifi: iwlwifi: mvm: fix number of concurrent link checks wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock wifi: iwlwifi: mvm: don't double-init spinlock wifi: iwlwifi: mvm: always free dup_data wifi: mac80211: recalc chanctx mindef before assigning wifi: mac80211: consider reserved chanctx for mindef wifi: mac80211: simplify chanctx allocation wifi: mac80211: Abort running color change when stopping the AP wifi: mac80211: fix min center freq offset tracing ... ==================== Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
As requested by Marcel skip netdev for Bluetooth patches. Bluetooth has its own mailing list and overloading netdev leads to fewer people reading it. Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/Reviewed-by:
-
Arnd Bergmann authored
mdio_bus_init() is either used as a local module_init() entry, or it gets called in phy_device.c. In the former case, there is no declaration, which causes a warning: drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes] Remove the #ifdef around the declaration to avoid the warning.. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still defined but have no prototype or caller. This causes a W=1 warning for the missing prototypes: net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes] net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes] The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING, and I coulnd't easily figure out the right set of #ifdefs, so just move the declarations out of the #ifdef to avoid the warning, at a small cost in code size over a more elaborate fix. Fixes: 188c67dd ("net: bridge: vlan options: add support for tunnel id dumping") Fixes: 569da082 ("net: bridge: vlan options: add support for tunnel mapping set/del") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
When CONFIG_PROC_FS is disabled, the function declarations for some procfs functions are hidden, but the definitions are still build, as shown by this compiler warning: net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes] net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes] net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes] Add another #ifdef to leave these out of the build. Signed-off-by:
-
Arnd Bergmann authored
The legacy drivers that still get called from net/Space.c have prototypes in net/Space, but this header is not included in most of the files that define those functions: drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes] drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes] drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes] Add the inclusion to avoids the warnings. Signed-off-by:
-
- 17 May, 2023 21 commits
-
-
Marc Kleine-Budde authored
This reverts commit 0920ccdf. The commit 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add binding definition for CAN3" [1], which is not in net/main, yet. This results in a parsing error of "stm32f746.dtsi". So revert this commit. [1] https://lore.kernel.org/all/20230423172528.1398158-2-dario.binacchi@amarulasolutions.com Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305172108.x5acbaQG-lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202305172130.eGGEUhpi-lkp@intel.com Fixes: 0920ccdf ("ARM: dts: stm32: add CAN support on stm32f746") Suggested-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - sgx test fix for false negatives - ftrace output is hard to parses and it masks inappropriate skips etc. This fix addresses the problems by integrating with kselftest runner * tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Improve integration with kselftest runner selftests/sgx: Add "test_encl.elf" to TEST_FILES
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - A collection of minor bug fixes * tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: Remove open coding of string copy SUNRPC: Fix trace_svc_register() call site SUNRPC: always free ctxt when freeing deferred request SUNRPC: double free xprt_ctxt while still in use SUNRPC: Fix error handling in svc_setup_socket() SUNRPC: Fix encoding of accepted but unsuccessful RPC replies lockd: define nlm_port_min,max with CONFIG_SYSCTL nfsd: define exports_proc_ops with CONFIG_PROC_FS SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Three bug fixes for recently discovered issues" * tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm/tpm_tis: Disable interrupts for more Lenovo devices tpm: Prevent hwrng from activating during resume tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
-
Arnd Bergmann authored
This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden behind this combination of tests. But that causes a warning when building with CONFIG_TRACING_BRANCHES, since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the declaration is thus hidden: kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes] Move the declaration out of the #ifdef to avoid the warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Florian Westphal authored
There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:
Florian Westphal <fw@strlen.de>
-
Florian Westphal authored
nft_trans_FOO objects all share a common nft_trans base structure, but trailing fields depend on the real object size. Access is only safe after trans->msg_type check. Check for rule type first. Found by code inspection. Fixes: 1a94e38d ("netfilter: nf_tables: add NFTA_RULE_ID attribute") Signed-off-by:
-
Tom Rix authored
gcc with W=1 and ! CONFIG_NF_NAT net/netfilter/nf_conntrack_netlink.c:3463:32: error: ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=] 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = { | ^~~~~~~~~~~~~~~~~~ net/netfilter/nf_conntrack_netlink.c:2979:33: error: ‘any_addr’ defined but not used [-Werror=unused-const-variable=] 2979 | static const union nf_inet_addr any_addr; | ^~~~~~~~ These variables use is controlled by CONFIG_NF_NAT, so should their definitions. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
-
Kai-Heng Feng authored
When the system attempts to sleep while mtk_t7xx is not ready, the driver cannot put the device to sleep: [ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state [ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14 [ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14 [ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14 [ 12.764776] PM: Some devices failed to suspend, or early wake event detected Mediatek confirmed the device can take a rather long time to complete its initialization, so wait for up to 20 seconds until init is done. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Benjamin Poirier authored
The cited commit added a stray colon to the 'v' option. That makes the option work incorrectly. ex: tools/testing/selftests/net# ./fib_nexthops.sh -v (should enable verbose mode, instead it shows help text due to missing arg) Fixes: 5feba472 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
The XPCS expects clause 73 (copper backplane) autoneg to follow the ethtool autoneg bit. It actually did that until the blamed commit inaptly replaced state->an_enabled (coming from ethtool) with phylink_autoneg_inband() (coming from the device tree or struct phylink_config), as part of an unrelated phylink_pcs API conversion. Russell King suggests that state->an_enabled from the original code was just a proxy for the ethtool Autoneg bit, and that the correct way of restoring the functionality is to check for this bit in the advertising mask. Fixes: 11059740 ("net: pcs: xpcs: convert to phylink_pcs_ops") Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/Suggested-by:
Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
M Chetan Kumar authored
In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication. Fixes: 3670970d ("net: iosm: shared memory IPC interface") Reported-by:
Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by:
-
Eric Dumazet authored
syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Turns out I missed a few patches due to use of old addresses by senders. Add a mailmap entry with my old addresses. Signed-off-by:
-
Aleksandr Loktionov authored
In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by:Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2023-05-16 This series contains updates to ice and iavf drivers. Ahmed adds setting of missed condition for statistics which caused incorrect reporting of values for ice. For iavf, he removes a call to set VLAN offloads during re-initialization which can cause incorrect values to be set. Dawid adds checks to ensure VF is ready to be reset before executing commands that will require it to be reset on ice. --- v2: Patch 2 - Redo commit message ==================== Signed-off-by: -
Marco Migliore authored
According to datasheet, the command opcode must be specified into bits [14:12] of the Extended Port Control register (EPC). Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by:
Marco Migliore <m.migliore@tiesse.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Christophe JAILLET authored
cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa4066 ("cassini: use request_firmware") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
-
Kuniyuki Iwashima authored
syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); write(fd_tun, buf, sizeof(buf)); close(fd_tun); If we enable NAPI and multi-queue on a TUN device, we can put skb into tfile->sk.sk_write_queue after the queue is detached. We should prevent it by checking tfile->detached before queuing skb. Note this must be done under tfile->sk.sk_write_queue.lock because write() and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would be a small race window: write() ioctl(IFF_DETACH_QUEUE) `- tun_get_user `- __tun_detach |- if (tfile->detached) |- tun_disable_queue | `-> false | `- tfile->detached = tun | `- tun_queue_purge |- spin_lock_bh(&queue->lock) `- __skb_queue_tail(queue, skb) Another solution is to call tun_queue_purge() when closing and reattaching the detached queue, but it could paper over another problems. Also, we do the same kind of test for IFF_NAPI_FRAGS. [0]: unreferenced object 0xffff88801edbc800 (size 2048): comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline] [<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979 [<000000003addde56>] kmalloc include/linux/slab.h:563 [inline] [<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035 [<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088 [<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438 [<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165 [<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414 [<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920 [<000000008eb24774>] do_open fs/namei.c:3636 [inline] [<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791 [<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818 [<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356 [<00000000057be699>] do_sys_open fs/open.c:1372 [inline] [<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline] [<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline] [<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff88802f671700 (size 240): comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s) hex dump (first 32 bytes): 68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h....... 00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............ backtrace: [<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644 [<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline] [<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378 [<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729 [<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline] [<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841 [<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035 [<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline] [<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline] [<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584 [<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637 [<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 [<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: cde8b15f ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Marc Kleine-Budde authored
Jimmy Assarsson <extja@kvaser.com> says: This patch series contains various bug fixes for the kvaser_pciefd driver. Link: https://lore.kernel.org/r/20230516134318.104279-1-extja@kvaser.comSigned-off-by:
-
Jimmy Assarsson authored
Disable interrupts in error path of probe function. Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.comSigned-off-by:
-
