- 31 Jul, 2023 11 commits
-
-
Yue Haibing authored
commit b16f8188 ("RDMA/hns: Refactor eq code for hip06") left behind hns_roce_cleanup_eq_table(). commit 773f841a ("RDMA/hns: Avoid filling sgid index when modifying QP to RTR") leave hns_get_gid_index() unused. Remove both. Link: https://lore.kernel.org/r/20230731135916.32392-1-yuehaibing@huawei.comSigned-off-by:
Yue Haibing <yuehaibing@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Bob Pearson authored
If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed. Fixes: 3050b998 ("IB/rxe: Fix race condition between requester and completer") Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.comSigned-off-by:
Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by:
-
Bob Pearson authored
This patch corrects an error in rxe_modify_srq where if the caller changes the srq size the actual new value is not returned to the caller since it may be larger than what is requested. Additionally it open codes the subroutine rcv_wqe_size() which adds very little value, and makes some whitespace changes. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20230620140142.9452-1-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
If create_qp does not fully succeed it is possible for qp cleanup code to attempt to drain the send or recv work queues before the queues have been created causing a seg fault. This patch checks to see if the queues exist before attempting to drain them. Link: https://lore.kernel.org/r/20230620135519.9365-3-rpearsonhpe@gmail.com Reported-by: syzbot+2da1965168e7dbcba136@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-rdma/00000000000012d89205fe7cfe00@google.com/raw Fixes: 49dc9c1f ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c") Fixes: fbdeb828 ("RDMA/rxe: Cleanup error state handling in rxe_comp.c") Signed-off-by:
-
Bob Pearson authored
This patch: - Moves code to initialize a qp send work queue to a subroutine named rxe_init_sq. - Moves code to initialize a qp recv work queue to a subroutine named rxe_init_rq. - Moves initialization of qp request and response packet queues ahead of work queue initialization so that cleanup of a qp if it is not fully completed can successfully attempt to drain the packet queues without a seg fault. - Makes minor whitespace cleanups. Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20230620135519.9365-2-rpearsonhpe@gmail.comSigned-off-by:
Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by:
-
Ruan Jinjie authored
There are a little ternary operators, the true or false judgment of which is unnecessary in C language semantics. Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230731085118.394443-1-ruanjinjie@huawei.comSigned-off-by:
Leon Romanovsky <leon@kernel.org>
-
Shetu Ayalew authored
The rx_dct_connect counter shows the number of received connection requests for the associated DCTs. Signed-off-by:
Shetu Ayalew <shetu@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/01cd24cd7f591734741309921fdc01fc770d84a8.1690121941.git.leon@kernel.orgSigned-off-by:
Leon Romanovsky <leonro@nvidia.com>
-
Ruan Jinjie authored
There are many pointers assigned first, which need not to be initialized, so remove the NULL assignments. Signed-off-by:
-
Yang Li authored
Remove description of @free_hwcqp in irdma_destroy_cqp(). to silence the warning: drivers/infiniband/hw/irdma/hw.c:580: warning: Excess function parameter 'free_hwcqp' description in 'irdma_destroy_cqp' Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6028Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20230731015915.34867-1-yang.lee@linux.alibaba.comReviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Bernard Metzler authored
Immediately removing the siw module after insertion may crash in siw_stop_tx_thread(), if the according thread did not yet had a chance to initialize its wait queue and siw_stop_tx_thread() tries to wakeup that thread. Initializing the threads state before spwaning it fixes it. Reported-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20230728114418.124328-1-bmt@zurich.ibm.comTested-by:
-
Ruan Jinjie authored
Remove unnecessary variable initializations. Signed-off-by:
-
- 30 Jul, 2023 7 commits
-
-
Sindhu Devale authored
HW GEN1 and GEN2 have different min WQ sizes but they are currently set to the same value. Use a gen specific attribute min_hw_wq_size and extend ABI to pass it to user-space. Signed-off-by:
Sindhu Devale <sindhu.devale@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155525.1081-3-shiraz.saleem@intel.comSigned-off-by:
-
Sindhu Devale authored
Currently the attribute cap.max_send_wr and cap.max_recv_wr sent from user-space during create QP are the provider computed SQ/RQ depth as opposed to raw values passed from application. This inhibits computation of an accurate value for max_send_wr and max_recv_wr for this QP in the kernel which matches the value returned in user create QP. Also these capabilities needs to be reported from the driver in query QP. Add support by extending the ABI to allow the raw cap.max_send_wr and cap.max_recv_wr to be passed from user-space, while keeping compatibility for the older scheme. The internal HW depth and shift needed for the WQs needs to be computed now for both kernel and user-mode QPs. Add new helpers to assist with this: irdma_uk_calc_depth_shift_sq, irdma_uk_calc_depth_shift_rq and irdma_uk_calc_depth_shift_wq. Consolidate all the user mode QP setup into a new function irdma_setup_umode_qp which keeps it with its counterpart irdma_setup_kmode_qp. Signed-off-by:
Youvaraj Sagar <youvaraj.sagar@intel.com> Signed-off-by:
-
Haoyue Xu authored
Previously, there was no way to query the number of lanes for a network card, so the same netdev_speed would result in a fixed pair of width and speed. As network card specifications become more diverse, such fixed mode is no longer suitable, so a method is needed to obtain the correct width and speed based on the number of lanes. This patch retrieves netdev lanes and speed from net_device and translates them to IB width and speed. Signed-off-by:
Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by:
Luoyouming <luoyouming@huawei.com> Signed-off-by:
Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20230721092052.2090449-1-huangjunxian6@hisilicon.comSigned-off-by:
-
Chandramohan Akula authored
Add debug counters to track the Doorbell pacing events and report the doorbell pacing debug stats. Signed-off-by:
Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1690383081-15033-5-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
Add code to expose some of the HW counters related to tx/rx data and Congestion control. Signed-off-by:
-
Chandramohan Akula authored
Report the additional resource counters which enables better debugging. Includes active RC/UD QPs, Watermark of the resources and a count that indicates the resize cq operations after driver load. Signed-off-by:
-
Chandramohan Akula authored
Move the resource stats to a separate stats structure. Signed-off-by:
-
- 26 Jul, 2023 4 commits
-
-
Mustafa Ismail authored
The return value from irdma_netdev_vlan_ipv6() is not used. Rename the functions and change to a void return. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
-
Krzysztof Czurylo authored
Add a CQ table based loookup to allow quick search for CQ pointer having CQ ID in case of CQ related asynchrononous event. The table is implemented in a similar fashion to QP table. Also add a reference counters for CQ. This is to prevent destroying CQ while an asynchronous event is being processed. The memory resource table size is sized higher with this update, and this table doesn't need to be physically contiguous, so use a vzalloc vs kzalloc to allocate the table. Signed-off-by:
Krzysztof Czurylo <krzysztof.czurylo@intel.com> Signed-off-by:
-
Sindhu Devale authored
In case of a failure in irdma_create_cqp, do not call irdma_destroy_cqp, but cleanup all the allocated resources in reverse order. Drop the extra argument in irdma_destroy_cqp as its no longer needed. Signed-off-by:
-
Sindhu Devale authored
Drop the local wqe_idx in irdma_sc_get_next_aeqe and instead store the wqe_idx in the info structure for all asynchronous events(AE) received. There is no reason it should be tied to a specific AE source. Signed-off-by:
-
- 24 Jul, 2023 3 commits
-
-
Christophe JAILLET authored
Use struct_size() instead of hand-writing it, when allocating a structure with a flex array. This is less verbose, more robust and more informative. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f4618a67d5ae0a30eb3f2b4558c8cc790feed79a.1690044376.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Junxian Huang authored
Remove VF extend configuration since the relative registers are configured in firmware currently. Signed-off-by:
-
Luoyouming authored
Support driver get the num of XRCD from firmware. Signed-off-by:
-
- 23 Jul, 2023 2 commits
-
-
Minjie Du authored
Avoid double assignment of iwqp->ietf_mem.va. Signed-off-by:
Minjie Du <duminjie@vivo.com> Link: https://lore.kernel.org/r/20230705031849.2443-1-duminjie@vivo.comSigned-off-by:
-
Minjie Du authored
Delete a duplicate statement from this function implementation. Signed-off-by:
Alok Prasad <palok@marvell.com> Signed-off-by:
-
- 21 Jul, 2023 13 commits
-
-
Chandramohan Akula authored
Add driver notify uapi for application notifying the driver about the doorbell FIFO congestion. Link: https://lore.kernel.org/r/1689742977-9128-8-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
User applications alert the driver when the Doorbell FIFO reaches the alarm threshold. The driver updates the pacing parameters in the shared page to do the maximum pacing by the application till the DB FIFO congestion reduces to pacing threshold. Driver keeps checking the DB FIFO depth at the pacing interval and gradually adjusts the pacing level. Once the pacing level reaches default values (no congestion in the FIFO) pacing gets completed. Link: https://lore.kernel.org/r/1689742977-9128-7-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
Update the alloc_page uapi functionality for handling the mapping of doorbell pacing shared page and bar address. Link: https://lore.kernel.org/r/1689742977-9128-6-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
Report the pacing capability to the user applications. Link: https://lore.kernel.org/r/1689742977-9128-5-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
Checks for pacing feature capability and get the doorbell pacing configuration using FW commands. Allocate a page and initialize the pacing parameters for the applications. Cleanup the page and de-initialize the pacing during device removal. Link: https://lore.kernel.org/r/1689742977-9128-4-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Chandramohan Akula authored
Add a parameter in the bnxt_en_dev structure to share the bar0 address with RoCE driver. Link: https://lore.kernel.org/r/1689742977-9128-3-git-send-email-selvin.xavier@broadcom.com CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Chandramohan Akula authored
Updating the HW structures for the doorbell pacing related information. Newly added interface structures will be used in the followup patches. Link: https://lore.kernel.org/r/1689742977-9128-2-git-send-email-selvin.xavier@broadcom.com CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Chuck Lever authored
We would like to enable the use of siw on top of a VPN that is constructed and managed via a tun device. That hasn't worked up until now because ARPHRD_NONE devices (such as tun devices) have no GID for the RDMA/core to look up. But it turns out that the egress device has already been picked for us -- no GID is necessary. addr_handler() just has to do the right thing with it. Link: https://lore.kernel.org/r/168960675257.3007.4737911174148394395.stgit@manet.1015granger.netSuggested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
Clean up to prepare for the addition of new logic. Link: https://lore.kernel.org/r/168960674597.3007.6128252077812202526.stgit@manet.1015granger.netSigned-off-by:
-
Chuck Lever authored
Have the iwarp side properly set the ndev in the device's sgid_attrs so that address resolution can treat it more like a RoCE device. Link: https://lore.kernel.org/r/168960673933.3007.8043081822081877578.stgit@manet.1015granger.netSuggested-by:
Tom Talpey <tom@talpey.com> Signed-off-by:
-
Chuck Lever authored
LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses. Currently, siw_device_create() falls back to copying the IB device's name in those cases, because an all-zero MAC address breaks the RDMA core address resolution mechanism. However, at the point when siw_device_create() constructs a GID, the ib_device::name field is uninitialized, leaving the MAC address to remain in an all-zero state. Fabricate a random artificial GID for such devices, and ensure this artificial GID is returned for all device query operations. Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.netReported-by:
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Link: https://lore.kernel.org/r/20230627144339.144478-20-Julia.Lawall@inria.frSigned-off-by:Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Link: https://lore.kernel.org/r/20230627144339.144478-15-Julia.Lawall@inria.frSigned-off-by:
-
