- 12 Mar, 2024 1 commit
-
-
Dan Carpenter authored
Using BUG_ON() is discouraged and also the check wasn't done early enough to prevent an out of bounds access. Check earlier and return an error instead of calling BUG(). Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/ae643df0-3a3e-4270-8dbf-be390ee4b478@moroto.mountainSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- 09 Mar, 2024 1 commit
-
-
Tengfei Fan authored
Use compatible name "qcom,sm4450-tlmm" instead of "qcom,sm4450-pinctrl" to match the compatible name in sm4450 pinctrl driver. Fixes: 7bf8b78f ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl") Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240129092512.23602-2-quic_tengfan@quicinc.comSigned-off-by:
-
- 07 Mar, 2024 2 commits
-
-
Linus Walleij authored
The AW9523 driver fails to build in some allmod configs since the I2C core can be a module, but AW9523 can not. Fix it up by allowing AW9523 to be a module (tristate). Fixes: 576623d7 ("pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander") Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403050916.KBtE6eEj-lkp@intel.com/Signed-off-by:
-
Linus Walleij authored
-
- 06 Mar, 2024 3 commits
-
-
Théo Lebrun authored
If nmk_gpio_populate_chip() returns an error, avoid deferencing its return value. Reported-by:
Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240306-mbly-gpio-err-fix-v1-1-a3605ba2336f@bootlin.comSigned-off-by:
-
Linus Walleij authored
Several commits introduce managed resources (devm_*) into the nmk_gpio_populate_chip() function. This isn't always working because when called from the Nomadik pin control driver we just want to populate some states for the device as the same states are used by the pin control driver. Some managed resources such as devm_kzalloc() etc will work, as the passed in platform device will be used for lifecycle management, but in some cases where we used the looked-up platform device for the GPIO block, this will cause problems for the combined pin control and GPIO driver, because it adds managed resources to the GPIO device before it is probed, which is something that the device core will not accept, and all of the GPIO blocks will refuse to probe: platform 8012e000.gpio: Resources present before probing platform 8012e080.gpio: Resources present before probing (...) Fix this by not tying any managed resources to the looked-up gpio_pdev/gpio_dev device, let's just live with the fact that these need imperative resource management for now. Drop in some notes and use a local *dev variable to clarify the code. Cc: Théo Lebrun <theo.lebrun@bootlin.com> Fixes: 12410e95 ("gpio: nomadik: use devm_platform_ioremap_resource() helper") Link: https://lore.kernel.org/r/20240305-fix-nomadik-gpio-v2-1-e5d1fbdc3f5c@linaro.org [Fixed some last minut print formatting] Signed-off-by:
-
Linus Walleij authored
The of_device_id array needs to be terminated with a NULL entry. Reported-by:
-
- 05 Mar, 2024 4 commits
-
-
Dan Carpenter authored
The pinctrl_add_gpio_range() function is deprecated add a comment so people don't accidentally use it in new code. Signed-off-by:
-
Andre Przywara authored
EPROBE_DEFER error returns are not really critical, since they cancel the probe process, but the kernel will return later and retry. However, depending on the probe order, this might issue quite some verbatim and scary, though pointless messages: [ 2.388731] 300b000.pinctrl: pin-224 (5000000.serial) status -517 [ 2.397321] 300b000.pinctrl: could not request pin 224 (PH0) from group PH0 on device 300b000.pinctrl Replace dev_err() with dev_err_probe(), which not only drops the priority of the message from error to debug, but also puts some text into debugfs' devices_deferred file, for later reference. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240305143859.2449147-1-andre.przywara@arm.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
The Awinic AW9523(B) is a multi-function I2C gpio expander in a TQFN-24L package, featuring PWM (max 37mA per pin, or total max power 3.2Watts) for LED driving capability. It has two ports with 8 pins per port (for a total of 16 pins), configurable as either PWM with 1/256 stepping or GPIO input/output, 1.8V logic input; each GPIO can be configured as input or output independently from each other. This IC also has an internal interrupt controller, which is capable of generating an interrupt for each GPIO, depending on the configuration, and will raise an interrupt on the INTN pin to advertise this to an external interrupt controller. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by:
David Bauer <mail@david-bauer.net> Link: https://lore.kernel.org/r/20210624214458.68716-2-mail@david-bauer.netAcked-by:
-
AngeloGioacchino Del Regno authored
Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210624214458.68716-1-mail@david-bauer.net [Fixed up minor bugs found by new checking tools] Signed-off-by:
-
- 03 Mar, 2024 1 commit
-
-
Andy Shevchenko authored
Previously driver got a few updates in order to replace OF APIs by respective firmware node, however it was not finished to the logical end, e.g., some APIs that has been used are still require OF node to be passed. Finish that job by converting leftovers to use firmware node APIs. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.comSigned-off-by:
-
- 01 Mar, 2024 1 commit
-
-
Théo Lebrun authored
PINCTRL_NOMADIK cannot select GPIO_NOMADIK without first selecting GPIOLIB on which GPIO_NOMADIK depends. GPIO_NOMADIK depends on OF_GPIO, it is a direct dependency. Reported-by:
-
- 29 Feb, 2024 27 commits
-
-
Biju Das authored
Add OF table as per the binding so that driver get instantiated and bind automatically when the driver is built as a module. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20240226191607.397386-1-biju.das.jz@bp.renesas.comSigned-off-by:
-
Varshini Rajendran authored
Add device tree binding for SAM9X7 pin controller. Signed-off-by:
Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by:
-
Colin Ian King authored
The variable ret is being assigned a value that is never read, it is being re-assigned a value in every case statement in the following switch statement. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/pinctrl/pinctrl-ocelot.c:1404:3: warning: Value stored to 'ret' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240223162850.3914349-1-colin.i.king@gmail.comSigned-off-by:
-
Théo Lebrun authored
Fetch a reference to the optional shared reset control and deassert it if it exists. Optional because not all platforms that use this driver have a reset attached to the reset block. Shared because some platforms that use the reset (at least Mobileye EyeQ5) share the reset across banks. Do not keep a reference to the reset control as it is not needed afterwards; the driver does not handle suspend, does not use runtime PM, does not register a remove callback and does not support unbinding from sysfs (made explicit with suppress_bind_attrs). The operation is done in nmk_gpio_populate_chip(). This function is called by either gpio-nomadik or pinctrl-nomadik, whoever comes first. This is here for historic reasons and could probably be removed now; it seems gpio-ranges enforces the ordering to be pinctrl-first. It is not the topic of the present patch however. Signed-off-by:
-
Théo Lebrun authored
We create a custom compatible for the STA2X11 IP block as integrated into the Mobileye EyeQ5 platform. Its wake and alternate functions have been disabled, we want to avoid touching those registers. We both do: (1) early return in functions that do not support the platform, but with warnings, and (2) avoid calling those functions in the first place. We ensure that pinctrl-nomadik is not used with this STA2X11 variant. Reviewed-by:
-
Théo Lebrun authored
Read the "ngpios" property to determine the number of GPIOs for a bank. If not available, fallback to NMK_GPIO_PER_CHIP ie 32 ie the current behavior. The IP block always supports 32 GPIOs, but platforms can expose a lesser amount. The Mobileye EyeQ5 is in this case; one bank is 29 GPIOs and the other is 23. Reviewed-by:
-
Théo Lebrun authored
Support a single IRQs used by multiple GPIO banks. Change the IRQ handler type from a chained handler (as used by gpiolib for ->parent_handler) to a threaded IRQ. Use the generic_handle_domain_irq_safe() helper. The non-safe version must be called in a no-IRQ context. The Mobileye EyeQ5 platform uses this GPIO controller and share an IRQ for its two banks. Signed-off-by:
-
Théo Lebrun authored
This GPIO driver is historically related to the Nomadik platform. It however can be used by others as it implements the ST STA2X11 IP block. Pick a less ambiguous name for it. Signed-off-by:
-
Théo Lebrun authored
Not all platforms using this platform driver expose a clock for this GPIO controller. Turn devm_clk_get() into devm_clk_get_optional() to avoid failing when no clocks are provided. Signed-off-by:
-
Théo Lebrun authored
Move away from statically allocated GPIO IDs. Switch to dynamic ID allocation. Static IDs are deprecated because they cause issues when multiple GPIO controllers are to be found on the same platform. Add a bit of complexity to do pin number -> GPIO chip + offset. Previously, bank number and offsets were retrieved using division and remainder (bank size being constant 32). Now, to get the pin number matching a bank base, we must know the sum of ngpios of previous banks. This is done in find_nmk_gpio_from_pin() which also exposes the offset inside the bank. Also remove the assumption that bank sizes are constant. Instead of using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio. Signed-off-by:
-
Théo Lebrun authored
Replace call to clk_get() by call to devm_clk_get(). Allow automatic cleanup of the clock in case of probe error. Signed-off-by:
-
Théo Lebrun authored
Replace calls to platform_get_resource() then devm_ioremap_resource() by a single call to devm_platform_ioremap_resource(). Signed-off-by:
-
Théo Lebrun authored
Avoid OF APIs in the GPIO subsystem. Here, replace of_property_read_{u32,bool}() call by device_property_read_{u32,bool}(). Signed-off-by: -
Théo Lebrun authored
Avoid OF APIs in the GPIO subsystem. Here, replace of_find_device_by_node() call by bus_find_device_by_of_node(). The new helper returns a struct device pointer. Store it in a new local variable and use it down the road. Signed-off-by:
-
Théo Lebrun authored
Add linux/slab.h header include for GFP flags. Signed-off-by:
-
Théo Lebrun authored
Fix strict checkpatch warnings relative to if-else blocks and bool expressions. Message types addressed: CHECK: Comparison to NULL could be written "!nmk_cfg_params[index].choice" CHECK: Unbalanced braces around else statement CHECK: Using comparison to false is error prone CHECK: Using comparison to true is error prone CHECK: braces {} should be used on all arms of this statement Before: 0 errors, 1 warnings, 16 checks. After: 0 errors, 1 warnings, 7 checks. Signed-off-by: -
Théo Lebrun authored
Fix strict checkpatch warnings relative to whitespace. Message types addressed: ERROR: space required before the open parenthesis '(' WARNING: quoted string split across lines CHECK: Alignment should match open parenthesis CHECK: Please don't use multiple blank lines CHECK: line length of 103 exceeds 100 columns CHECK: spaces preferred around that '+' (ctx:VxV) Before: 1 errors, 2 warnings, 38 checks. After: 0 errors, 1 warnings, 16 checks. Signed-off-by: -
Théo Lebrun authored
Fix strict checkpatch warnings relative to types. Warning types addressed: WARNING: do not add new typedefs WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: static const char * array should probably be static const char * const Total messages before: 1 errors, 40 warnings, 39 checks. Total messages after: 1 errors, 2 warnings, 38 checks. Signed-off-by: -
Théo Lebrun authored
nmk_pinctrl_probe() iterates over each GPIO block. Use an early conditional continue to skip to the next iteration rather than indent all the loop code block. Do not change code logic. The block is changed from: for (i = 0; i < NMK_MAX_BANKS; i++) { x = of_parse_phandle(...); if (x) { ... do work ... } } To: for (i = 0; i < NMK_MAX_BANKS; i++) { x = of_parse_phandle(...); if (!x) continue; ... do work ... } Signed-off-by: -
Théo Lebrun authored
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC message is as such: drivers/pinctrl/nomadik/pinctrl-nomadik.c:1169:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by:
-
Théo Lebrun authored
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC message is as such: drivers/pinctrl/nomadik/pinctrl-nomadik.c:855:21: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t {aka const long unsigned int}’ [-Wformat=] Signed-off-by: -
Théo Lebrun authored
PINCTRL_NOMADIK, PINCTRL_STN8815 and PINCTRL_DB8500 depend on ARCH_U8500 or ARCH_NOMADIK. Add COMPILE_TEST as an option to allow test building the driver. Signed-off-by:
-
Théo Lebrun authored
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two platform drivers: pinctrl & GPIO. Move the GPIO aspect to the drivers/gpio/ folder, as would be expected. Both drivers are intertwined for a reason; pinctrl requires access to GPIO registers for pinmuxing, pull-disable, disabling interrupts while setting the muxing and wakeup control. Information sharing is done through a shared array containing GPIO chips and a few helper functions. That shared array is not touched from gpio-nomadik when CONFIG_PINCTRL_NOMADIK is not defined. Make no change to the code that moved into gpio-nomadik; there should be no behavior change following. A few functions are shared and header comments are added. Checkpatch warnings are addressed. NUM_BANKS is renamed to NMK_MAX_BANKS. It is supported to compile gpio-nomadik without pinctrl-nomadik. The opposite is not true. Signed-off-by:
-
Théo Lebrun authored
Previously, the statement looked like: slpm[x] &= ~BIT(g->grp.pins[i]); Where: - slpm is a unsigned int pointer; - g->grp.pins[i] is a pin number. It can grow to more than 32. The expected shift amount is a pin bank offset. This bug does not occur on every group or pin: the altsetting must be NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured. For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the right altsetting and pins 229 and 230. Fixes: dbfe8ca2 ("pinctrl/nomadik: implement pin multiplexing") Reviewed-by: -
Théo Lebrun authored
Add optional reset device-tree property to the Nomadik GPIO controller. Acked-by:
-
Théo Lebrun authored
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its compatible to the dt-bindings. One difference is that the block as integrated on EyeQ5 does not support sleep-mode. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-3-3ba757474006@bootlin.comSigned-off-by:
-
Théo Lebrun authored
This GPIO controller can support a lesser number of GPIOs than 32. Express that in devicetree using an optional, generic property. Reviewed-by:
-
