- 02 Oct, 2013 14 commits
-
-
Andy Gospodarek authored
Veaceslav has been doing a significant amount of work on bonding lately and reached out to me about being a maintainer. After discussing this with him, I think he would be a good fit as a bonding maintainer. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Acked-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Jamal sent patch to add tc user simple actions to iproute2 but required header was not being exported. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Andi Kleen authored
tcp_established_options assumes opts->options is 0 before calling, as it read modify writes it. For the tcp_current_mss() case the opts structure is not zeroed, so this can be done with uninitialized values. This is ok, because ->options is not read in this path. But it's still better to avoid the operation on the uninitialized field. This shuts up a static code analyzer, and presumably may help the optimizer. Cc: netdev@vger.kernel.org Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Andi Kleen authored
eee_get_cur assumes that the output data is already zeroed. It can read-modify-write the advertised field: if (ipcnfg & E1000_IPCNFG_EEE_100M_AN) 2594 edata->advertised |= ADVERTISED_100baseT_Full; This is ok for the normal ethtool eee_get call, which always zeroes the input data before. But eee_set_cur also calls eee_get_cur and it did not zero the input field. Later on it then compares agsinst the field, which can contain partial stack garbage. Zero the input field in eee_set_cur() too. Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Signed-off-by:Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David S. Miller authored
Rob Herring says: ==================== This is a couple of fixes related to xgmac_set_rx_mode. The changes are necessary for "bridge fdb add" to work correctly. ==================== Signed-off-by: -
Rob Herring authored
Highbank and Midway xgmac h/w have different number of MAC address filter registers with 7 and 31, respectively. Highbank has been wrong, so fix it and detect the number of filter registers at run-time. Unfortunately, the version register is the same on both SOCs, so simply test if write to the last filter register will take a value. It always reads as 0 if not. Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Rob Herring authored
Even in promiscuous mode, we need to add filter addresses for correct operation. This fixes silent failures when using a bridge and adding addresses using the "bridge fdb add" command. Signed-off-by:
-
Rob Herring authored
In commit 2ee68f62 (net: calxedaxgmac: fix various errors in xgmac_set_rx_mode), a fix to clean-up old address entries was added. However, the loop to zero out the entries failed to increment the register address resulting in only 1 entry getting cleared. Fix this to correctly use the loop index. Also, the end of the loop condition was off by 1 and should have been <= rather than <. Signed-off-by:
-
Mathias Krause authored
When filling the netlink message we miss to wipe the pad field, therefore leak one byte of heap memory to userland. Fix this by setting pad to 0. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
David S. Miller authored
Mathias Krause says: ==================== This series fixes a few netlink related issues of the connector interface. The first two patches are bug fixes. The last two are cleanups. ==================== Signed-off-by: -
Mathias Krause authored
Use the precalculated size instead of obfuscating the message length calculation by first subtracting the netlink header length from size and then use the NLMSG_LENGTH() macro to add it back again. Signed-off-by:
-
Mathias Krause authored
We calculated the size for the netlink message buffer as size. Use size in the memcpy() call as well instead of recalculating it. Signed-off-by:
-
Mathias Krause authored
The current code tests the length of the whole netlink message to be at least as long to fit a cn_msg. This is wrong as nlmsg_len includes the length of the netlink message header. Use nlmsg_len() instead to fix this "off-by-NLMSG_HDRLEN" size check. Cc: stable@vger.kernel.org # v2.6.14+ Signed-off-by:
-
Mathias Krause authored
Initialize event_data for all possible message types to prevent leaking kernel stack contents to userland (up to 20 bytes). Also set the flags member of the connector message to 0 to prevent leaking two more stack bytes this way. Cc: stable@vger.kernel.org # v2.6.15+ Signed-off-by:
-
- 01 Oct, 2013 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: 1) Multiply in netfilter IPVS can overflow when calculating destination weight. From Simon Kirby. 2) Use after free fixes in IPVS from Julian Anastasov. 3) SFC driver bug fixes from Daniel Pieczko. 4) Memory leak in pcan_usb_core failure paths, from Alexey Khoroshilov. 5) Locking and encapsulation fixes to serial line CAN driver, from Andrew Naujoks. 6) Duplex and VF handling fixes to bnx2x driver from Yaniv Rosner, Eilon Greenstein, and Ariel Elior. 7) In lapb, if no other packets are outstanding, T1 timeouts actually stall things and no packet gets sent. Fix from Josselin Costanzi. 8) ICMP redirects should not make it to the socket error queues, from Duan Jiong. 9) Fix bugs in skge DMA mapping error handling, from Nikulas Patocka. 10) Fix setting of VLAN priority field on via-rhine driver, from Roget Luethi. 11) Fix TX stalls and VLAN promisc programming in be2net driver from Ajit Khaparde. 12) Packet padding doesn't get handled correctly in new usbnet SG support code, from Ming Lei. 13) Fix races in netdevice teardown wrt. network namespace closing. From Eric W. Biederman. 14) Fix potential missed initialization of net_secret if not TCP connections are openned. From Eric Dumazet. 15) Cinterion PLXX product ID in qmi_wwan driver is wrong, from Aleksander Morgado. 16) skb_cow_head() can change skb->data and thus packet header pointers, don't use stale ip_hdr reference in ip_tunnel code. 17) Backend state transition handling fixes in xen-netback, from Paul Durrant. 18) Packet offset for AH protocol is handled wrong in flow dissector, from Eric Dumazet. 19) Taking down an fq packet scheduler instance can leave stale packets in the queues, fix from Eric Dumazet. 20) Fix performance regressions introduced by TCP Small Queues. From Eric Dumazet. 21) IPV6 GRE tunneling code calculates max_headroom incorrectly, from Hannes Frederic Sowa. 22) Multicast timer handlers in ipv4 and ipv6 can be the last and final reference to the ipv4/ipv6 specific network device state, so use the reference put that will check and release the object if the reference hits zero. From Salam Noureddine. 23) Fix memory corruption in ip_tunnel driver, and use skb_push() instead of __skb_push() so that similar bugs are less hard to find. From Steffen Klassert. 24) Add forgotten hookup of rtnl_ops in SIT and ip6tnl drivers, from Nicolas Dichtel. 25) fq scheduler doesn't accurately rate limit in certain circumstances, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) pkt_sched: fq: rate limiting improvements ip6tnl: allow to use rtnl ops on fb tunnel sit: allow to use rtnl ops on fb tunnel ip_tunnel: Remove double unregister of the fallback device ip_tunnel_core: Change __skb_push back to skb_push ip_tunnel: Add fallback tunnels to the hash lists ip_tunnel: Fix a memory corruption in ip_tunnel_xmit qlcnic: Fix SR-IOV configuration ll_temac: Reset dma descriptors indexes on ndo_open skbuff: size of hole is wrong in a comment ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put ethernet: moxa: fix incorrect placement of __initdata tag ipv6: gre: correct calculation of max_headroom powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file Revert "powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file" bonding: Fix broken promiscuity reference counting issue tcp: TSQ can use a dynamic limit dm9601: fix IFF_ALLMULTI handling pkt_sched: fq: qdisc dismantle fixes ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fix from David Miller: "Just a single bug fix to a regression added during some strlcpy() conversions" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix buggy strlcpy() conversion in ldom_reboot().
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs lru leak fix from Al Viro: "The fix in "super: fix for destroy lrus" didn't - they need to be destroyed, all right, but that's the wrong place..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/super.c: fix lru_list leak for real
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull two KVM fixes from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: do not check bit 12 of EPT violation exit qualification when undefined ARM: kvm: rename cpu_reset to avoid name clash
-
Al Viro authored
Freeing ->s_{inode,dentry}_lru in deactivate_locked_super() is wrong; the right place is destroy_super(). As it is, we leak them if sget() decides that new superblock it has allocated (and never shown to anybody) isn't needed and should be freed. Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Eric Dumazet authored
FQ rate limiting suffers from two problems, reported by Steinar : 1) FQ enforces a delay when flow quantum is exhausted in order to reduce cpu overhead. But if packets are small, current delay computation is slightly wrong, and observed rates can be too high. Steinar had this problem because he disabled TSO and GSO, and default FQ quantum is 2*1514. (Of course, I wish recent TSO auto sizing changes will help to not having to disable TSO in the first place) 2) maxrate was not used for forwarded flows (skbs not attached to a socket) Tested: tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit netperf -H lpq84 -l 1000 & sleep 10 ; tc -s qdisc show dev eth0 qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 maxrate 8000Kbit Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0) rate 7831Kbit 653pps backlog 7570b 5p requeues 0 44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns 0 gc, 0 highprio, 5545 throttled lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12 09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 <nop,nop,timestamp 961812 572609068> 09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 <nop,nop,timestamp 961812 572609068> 09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 <nop,nop,timestamp 572609080 961812> 09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071> 09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071> 09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 <nop,nop,timestamp 572609083 961815> 09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074> 09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074> 09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 <nop,nop,timestamp 572609086 961818> 09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077> 09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077> 09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 <nop,nop,timestamp 572609090 961821> Reported-by:
Steinar H. Gunderson <sesse@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Nicolas Dichtel authored
rtnl ops where introduced by c075b130 ("ip6tnl: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 0bd87628 ("ip6tnl: add x-netns support")). Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
rtnl ops where introduced by ba3e3f50 ("sit: advertise tunnel param via rtnl"), but I forget to assign rtnl ops to fb tunnels. Now that it is done, we must remove the explicit call to unregister_netdevice_queue(), because the fallback tunnel is added to the queue in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this is valid since commit 5e6700b3 ("sit: add support of x-netns")). Signed-off-by:
-
David S. Miller authored
ip_tunnel bug fixes from Steffen Klassert. Signed-off-by: -
Steffen Klassert authored
When queueing the netdevices for removal, we queue the fallback device twice in ip_tunnel_destroy(). The first time when we queue all netdevices in the namespace and then again explicitly. Fix this by removing the explicit queueing of the fallback device. Bug was introduced when network namespace support was added with commit 6c742e71 ("ipip: add x-netns support"). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Acked-by:
-
Steffen Klassert authored
Git commit 0e6fbc5b ("ip_tunnels: extend iptunnel_xmit()") moved the IP header installation to iptunnel_xmit() and changed skb_push() to __skb_push(). This makes possible bugs hard to track down, so change it back to skb_push(). Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by:
-
Steffen Klassert authored
Currently we can not update the tunnel parameters of the fallback tunnels because we don't find them in the hash lists. Fix this by adding them on initialization. Bug was introduced with commit c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by:
-
Steffen Klassert authored
We might extend the used aera of a skb beyond the total headroom when we install the ipip header. Fix this by calling skb_cow_head() unconditionally. Bug was introduced with commit c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter/IPVS fixes for your net tree, they are: * Fix BUG_ON splat due to malformed TCP packets seen by synproxy, from Patrick McHardy. * Fix possible weight overflow in lblc and lblcr schedulers due to 32-bits arithmetics, from Simon Kirby. * Fix possible memory access race in the lblc and lblcr schedulers, introduced when it was converted to use RCU, two patches from Julian Anastasov. * Fix hard dependency on CPU 0 when reading per-cpu stats in the rate estimator, from Julian Anastasov. * Fix race that may lead to object use after release, when invoking ipvsadm -C && ipvsadm -R, introduced when adding RCU, from Julian Anastasov. ==================== Signed-off-by: -
Manish Chopra authored
o Interface needs to be brought down and up while configuring SR-IOV. Protect interface up/down using rtnl_lock()/rtnl_unlock() Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Ricardo Ribalda authored
The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
Since commit c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves"), hole size is one bit less than what is written in the comment. Signed-off-by:
-
git://gitorious.org/linux-can/linux-canDavid S. Miller authored
Signed-off-by: -
Salam Noureddine authored
It is possible for the timer handlers to run after the call to ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the inet6_dev being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by:
Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by:
-
Salam Noureddine authored
It is possible for the timer handlers to run after the call to ip_mc_down so use in_dev_put instead of __in_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the in_device being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
__initdata tag should be placed between the variable name and equal sign for the variable to be placed in the intended .init.data section. In this particular case __initdata is incorrect as moxart_mac_driver can be used after the driver gets initialized. Also while at it static-ize moxart_mac_driver. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Hannes Frederic Sowa authored
gre_hlen already accounts for sizeof(struct ipv6_hdr) + gre header, so initialize max_headroom to zero. Otherwise the if (encap_limit >= 0) { max_headroom += 8; mtu -= 8; } increments an uninitialized variable before max_headroom was reset. Found with coverity: 728539 Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Aida Mynzhasova authored
Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by:
Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Acked-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
David S. Miller authored
This reverts commit 894116bd. I applied the wrong version of this patch, correct version coming up. Signed-off-by:
-
Neil Horman authored
Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by:
Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by:
-
Eric Dumazet authored
When TCP Small Queues was added, we used a sysctl to limit amount of packets queues on Qdisc/device queues for a given TCP flow. Problem is this limit is either too big for low rates, or too small for high rates. Now TCP stack has rate estimation in sk->sk_pacing_rate, and TSO auto sizing, it can better control number of packets in Qdisc/device queues. New limit is two packets or at least 1 to 2 ms worth of packets. Low rates flows benefit from this patch by having even smaller number of packets in queues, allowing for faster recovery, better RTT estimations. High rates flows benefit from this patch by allowing more than 2 packets in flight as we had reports this was a limiting factor to reach line rate. [ In particular if TX completion is delayed because of coalescing parameters ] Example for a single flow on 10Gbp link controlled by FQ/pacing 14 packets in flight instead of 2 $ tc -s -d qd qdisc fq 8001: dev eth0 root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 Sent 1168459366606 bytes 771822841 pkt (dropped 0, overlimits 0 requeues 6822476) rate 9346Mbit 771713pps backlog 953820b 14p requeues 6822476 2047 flow, 2046 inactive, 1 throttled, delay 15673 ns 2372 gc, 0 highprio, 0 retrans, 9739249 throttled, 0 flows_plimit Note that sk_pacing_rate is currently set to twice the actual rate, but this might be refined in the future when a flow is in congestion avoidance. Additional change : skb->destructor should be set to tcp_wfree(). A future patch (for linux 3.13+) might remove tcp_limit_output_bytes Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
