- 09 Dec, 2020 10 commits
-
-
Badhri Jagan Sridharan authored
TCPM at present lacks the notion of VSAFE0V. There are three vbus threshold levels that are critical to track: a. vSafe5V - VBUS “5 volts” as defined by the USB PD specification. b. vSinkDisconnect - Threshold used for transition from Attached.SNK to Unattached.SNK. c. vSafe0V - VBUS “0 volts” as defined by the USB PD specification. Tracking vSafe0V is crucial for entry into Try.SNK and Attached.SRC and turning vbus back on by the source in response to hard reset. >From "4.5.2.2.8.2 Exiting from AttachWait.SRC State" section in the Type-C spec: "The port shall transition to Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." "A DRP that strongly prefers the Sink role may optionally transition to Try.SNK instead of Attached.SRC when VBUS is at vSafe0V and the SRC.Rd state is detected on exactly one of the CC1 or CC2 pins for at least tCCDebounce." >From "7.1.5 Response to Hard Resets" section in the PD spec: "After establishing the vSafe0V voltage condition on VBUS, the Source Shall wait tSrcRecover before re-applying VCONN and restoring VBUS to vSafe5V." vbus_present in the TCPM code tracks vSafe5V(vbus_present is true) and vSinkDisconnect(vbus_present is false). This change adds is_vbus_vsafe0v callback which when set makes TCPM query for vSafe0V voltage level when needed. Since not all TCPC controllers might have the capability to report vSafe0V, TCPM assumes that vSafe0V is same as vSinkDisconnect when is_vbus_vsafe0v callback is not set. This allows TCPM to continue to support controllers which don't have the support for reporting vSafe0V. Introducing vSafe0V helps fix the failure reported at "Step 15. CVS verifies PUT remains in AttachWait.SRC for 500ms" of "TD 4.7.2 Try. SNK DRP Connect DRP Test" of "Universal Serial Bus Type-C (USB Type-C) Functional Test Specification Chapters 4 and 5". Here the compliance tester intentionally maintains vbus at greater than vSafe0V and expects the Product under test to stay in AttachWait.SRC till vbus drops to vSafe0V. Reviewed-by:Guenter Roeck <linux@roeck-us.net> Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20201202040840.663578-1-badhri@google.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Badhri Jagan Sridharan authored
tcpm_check_send_discover does not clear the send_discover flag when any of the following conditions are not met. 1. data_role is TYPEC_HOST 2. link is pd_capable Discovery indentity would anyways not be attempted during the current session anymore when the above conditions are not met. Hence clear the send_discover flag here to prevent tcpm_enable_frs_work from rescheduling indefinetly. Reviewed-by:
-
Badhri Jagan Sridharan authored
nRetryCount was updated from 3 to 2 between PD2.0 and PD3.0 spec. nRetryCount in "Table 6-34 Counter parameters" of the PD 2.0 spec is set to 3, whereas, nRetryCount in "Table 6-59 Counter parameters" is set to 2. Pass down negotiated rev in pd_transmit so that low level chip drivers can update the retry count accordingly before attempting packet transmission. This helps in passing "TEST.PD.PORT.ALL.02" of the "Power Delivery Merged" test suite which was initially failing with "The UUT did not retransmit the message nReryCount times" In fusb302 & tcpci drivers, by default the driver sets the retry count to 3 (Default for PD 2.0). Update this to 2, if the negotiated rev is PD 3.0. In wcove, since the retry count is intentionally set to max, leaving it as is. Reviewed-by:
-
Utkarsh Patel authored
When Intel PMC Mux agent driver receives the response message from PMC, it checks for the same response bits for all the mux states. Corrected it by checking correct response message bits, Bit 8 & 9 for the SAFE Mode and Alternate Modes and Bit 16 & 17 for the Connect and Disconnect Modes. Reviewed-by:
Utkarsh Patel <utkarsh.h.patel@intel.com> Link: https://lore.kernel.org/r/20201203220813.16281-1-utkarsh.h.patel@intel.comSigned-off-by:
-
Zhang Qilong authored
The pm_runtime_enable will decrement the power disable depth. Imbalance depth will resulted in enabling runtime PM of device fails later. Thus a pairing decrement must be needed on the error handling path to keep it balanced. Fixes: 6c984b06 ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs") Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.comSigned-off-by:
-
Li Jun authored
If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state. Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0. [commit message rewording -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel.comSigned-off-by:
-
Mika Westerberg authored
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt controller awake if the host controller is not allowed to sleep. This is the case even if no USB devices are connected to the host. Add the Intel Alpine Ridge LP product-id to the list of product-ids for which we allow runtime PM by default. Fixes: 2815ef7f ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: <stable@vger.kernel.org> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Tejas Joglekar authored
The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8 for HS. The controller loads and updates the TRB cache from the transfer ring in system memory whenever the driver issues a start transfer or update transfer command. For chained TRBs, the Synopsys xHC requires that the total amount of bytes for all TRBs loaded in the TRB cache be greater than or equal to 1 MPS. Or the chain ends within the TRB cache (with a last TRB). If this requirement is not met, the controller will not be able to send or receive a packet and it will hang causing a driver timeout and error. This can be a problem if a class driver queues SG requests with many small-buffer entries. The XHCI driver will create a chained TRB for each entry which may trigger this issue. This patch adds logic to the XHCI driver to detect and prevent this from happening. For every (TRB_CACHE_SIZE - 2), we check the total buffer size of the SG list and if the last window of (TRB_CACHE_SIZE - 2) SG list length and we don't make up at least 1 MPS, we create a temporary buffer to consolidate full SG list into the buffer. We check at (TRB_CACHE_SIZE - 2) window because it is possible that there would be a link and/or event data TRB that take up to 2 of the cache entries. We discovered this issue with devices on other platforms but have not yet come across any device that triggers this on Linux. But it could be a real problem now or in the future. All it takes is N number of small chained TRBs. And other instances of the Synopsys IP may have smaller values for the TRB_CACHE_SIZE which would exacerbate the problem. Signed-off-by:
Tejas Joglekar <joglekar@synopsys.com> Signed-off-by:
-
Tejas Joglekar authored
This commit uses the private data passed by parent device to set the quirk for Synopsys xHC. This patch fixes the SNPS xHC hang issue when the data is scattered across small buffers which does not make atleast MPS size for given TRB cache size of SNPS xHC. Signed-off-by:
-
- 08 Dec, 2020 2 commits
-
-
Alan Stern authored
Commit d9f0d82f ("USB: legousbtower: use usb_control_msg_recv()") contained an elementary logical error. The check of the return code from the new usb_control_msg_recv() function was inverted. Reported-and-tested-by: syzbot+9be25235b7a69b24d117@syzkaller.appspotmail.com Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'thunderbolt-for-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.11 merge window This includes following Thunderbolt/USB4 changes for v5.11 merge window: * DMA traffic test driver * USB4 router NVM upgrade improvements * USB4 router operations proxy implementation available in the recent Intel Connection Manager firmwares * Support for Intel Maple Ridge discrete Thunderbolt 4 controller * A couple of cleanups and minor improvements. * tag 'thunderbolt-for-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (22 commits) thunderbolt: Add support for Intel Maple Ridge thunderbolt: Add USB4 router operation proxy for firmware connection manager thunderbolt: Move constants for USB4 router operations to tb_regs.h thunderbolt: Add connection manager specific hooks for USB4 router operations thunderbolt: Pass TX and RX data directly to usb4_switch_op() thunderbolt: Pass metadata directly to usb4_switch_op() thunderbolt: Perform USB4 router NVM upgrade in two phases thunderbolt: Return -ENOTCONN when ERR_CONN is received thunderbolt: Keep the parent runtime resumed for a while on device disconnect thunderbolt: Log adapter numbers in decimal in path activation/deactivation thunderbolt: Log which connection manager implementation is used thunderbolt: Move max_boot_acl field to correct place in struct icm MAINTAINERS: Add Isaac as maintainer of Thunderbolt DMA traffic test driver thunderbolt: Add DMA traffic test driver thunderbolt: Add support for end-to-end flow control thunderbolt: Make it possible to allocate one directional DMA tunnel thunderbolt: Create debugfs directory automatically for services thunderbolt: Add functions for enabling and disabling lane bonding on XDomain thunderbolt: Add link_speed and link_width to XDomain thunderbolt: Create XDomain devices for loops back to the host ...
-
- 07 Dec, 2020 8 commits
-
-
Oliver Neukum authored
I got reports that some models of this old scanner need this when using runtime PM. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.comSigned-off-by:
-
Guido Günther authored
This allows downstream supplies and userspace to detect whether external power is supplied. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Guido Günther <agx@sigxcpu.org> Link: https://lore.kernel.org/r/2c8e81d9da9ff05b065f66edba915edd11f74065.1607166657.git.agx@sigxcpu.orgSigned-off-by:
-
Guido Günther authored
This is more in line with what tcpm does and will be needed to avoid recursive dependency like > drivers/power/supply/Kconfig:2:error: recursive dependency detected! drivers/power/supply/Kconfig:2: symbol POWER_SUPPLY is selected by TYPEC_TPS6598X drivers/usb/typec/Kconfig:64: symbol TYPEC_TPS6598X depends on REGMAP_I2C drivers/base/regmap/Kconfig:19: symbol REGMAP_I2C is selected by CHARGER_ADP5061 drivers/power/supply/Kconfig:93: symbol CHARGER_ADP5061 depends on POWER_SUPPLY For a resolution refer to Documentation/kbuild/kconfig-language.rst subsection "Kconfig recursive dependency limitations" when selecting POWER_SUPPLY. Reviewed-by:
-
Dan Carpenter authored
This code is using the wrong sizeof() so it does not allocate enough memory. It allocates 32 bytes but 72 are required. That will lead to memory corruption. Fixes: ae078092 ("usb: mtu3: add debugfs interface files") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ikqc4Mo2/0G72j@mwanda Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Bui Quang Minh authored
This error path err_add_pdata: for (i = 0; i < mod_data.num; i++) kfree(dum[i]); can be triggered when not all dum's elements are initialized. Fix this by initializing all dum's elements to NULL. Acked-by:
Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/1607063090-3426-1-git-send-email-minhquangbui99@gmail.comSigned-off-by:
-
Fabio Estevam authored
According to the i.MX6UL Errata document: https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf ERR007881 also affects i.MX6UL, so pass the CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue. Fixes: 52fe568e ("usb: chipidea: imx: add imx6ul usb support") Cc: <stable@vger.kernel.org> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.orgSigned-off-by:
-
Johan Hovold authored
The new control-message helpers include a pipe-type check which is almost completely redundant. Control messages are generally sent to the default pipe which always exists and is of the correct type since its endpoint representation is created by USB core as part of enumeration for all devices. There is currently only one instance of a driver in the tree which use a control endpoint other than endpoint 0 (and it does not use the new helpers). Drivers should be testing for the existence of their resources at probe rather than at runtime, but to catch drivers failing to do so USB core already does a sanity check on URB submission and triggers a WARN(). Having the same sanity check done in the helper only suppresses the warning without allowing us to find and fix the drivers. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20201204085110.20055-2-johan@kernel.orgSigned-off-by:
-
Greg Kroah-Hartman authored
We want the USB fixes in here as well. Signed-off-by:
-
- 06 Dec, 2020 20 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small driver fixes, and one "large" revert, for 5.10-rc7. They include: - revert mei patch from 5.10-rc1 that was using a reserved userspace value. It will be resubmitted once the proper id has been assigned by the virtio people. - habanalabs fixes found by the fall-through audit from Gustavo - speakup driver fixes for reported issues - fpga config build fix for reported issue. All of these except the revert have been in linux-next with no reported issues. The revert is "clean" and just removes a previously-added driver, so no real issue there" * tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "mei: virtio: virtualization frontend driver" fpga: Specify HAS_IOMEM dependency for FPGA_DFL habanalabs: put devices before driver removal habanalabs: free host huge va_range if not used speakup: Reject setting the speakup line discipline outside of speakup -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty core fixes for 5.10-rc7. They resolve some reported locking issues in the tty core. While they have not been in a released linux-next yet, they have passed all of the 0-day bot testing as well as the submitter's testing" * tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix ->session locking tty: Fix ->pgrp locking in tiocspgrp()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.10-rc7 that resolve a number of reported issues, and add some new device ids. Nothing major here, but these solve some problems that people were having with the 5.10-rc tree: - reverts for USB storage dma settings that broke working devices - thunderbolt use-after-free fix - cdns3 driver fixes - gadget driver userspace copy fix - new device ids All of these except for the reverts have been in linux-next with no reported issues. The reverts are "clean" and were tested by Hans, as well as passing the 0-day tests" * tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Use local copy of descriptors for userspace copy usb: ohci-omap: Fix descriptor conversion Revert "usb-storage: fix sdev->host->dma_dev" Revert "uas: fix sdev->host->dma_dev" Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives" USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants thunderbolt: Fix use-after-free in remove_unplugged_switch()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make the AMD L3 QoS code and data priorization enable/disable mechanism work correctly. The control bit was only set/cleared on one of the CPUs in a L3 domain, but it has to be modified on all CPUs in the domain. The initial documentation was not clear about this, but the updated one from Oct 2020 spells it out. - Fix an off by one in the UV platform detection code which causes the UV hubs to be identified wrongly. The chip revisions start at 1 not at 0. - Fix a long standing bug in the evaluation of prefixes in the uprobes code which fails to handle repeated prefixes properly. The aggregate size of the prefixes can be larger than the bytes array but the code blindly iterated over the aggregate size beyond the array boundary. Add a macro to handle this case properly and use it at the affected places" * tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes x86/platform/uv: Fix UV4 hub revision adjustment x86/resctrl: Fix AMD L3 QOS CDP enable/disable -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two fixes for performance monitoring on X86: - Add recursion protection to another callchain invoked from x86_pmu_stop() which can recurse back into x86_pmu_stop(). The first attempt to fix this missed this extra code path. - Use the already filtered status variable to check for PEBS counter overflow bits and not the unfiltered full status read from IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which would be evaluated incorrectly" * tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Check PEBS status correctly perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of updates for the interrupt subsystem: - Make multiqueue devices which use the managed interrupt affinity infrastructure work on PowerPC/Pseries. PowerPC does not use the generic infrastructure for setting up PCI/MSI interrupts and the multiqueue changes failed to update the legacy PCI/MSI infrastructure. Make this work by passing the affinity setup information down to the mapping and allocation functions. - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing and he's not reachable. We hope all is well with him and say thanks for his work over the years" * tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc/pseries: Pass MSI affinity to irq_create_mapping() genirq/irqdomain: Add an irq_create_mapping_affinity() function MAINTAINERS: Move Jason Cooper to CREDITS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull intel_idle build fix from Thomas Gleixner: "A tiny build fix for a recent change in the intel_idle driver which missed a CONFIG dependency and broke the build for certain configurations" * tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_idle: Build fix
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: mm (memcg, zsmalloc, swap, mailmap, selftests, pagecache, hugetlb, pagemap), lib, and coredump" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/mmap.c: fix mmap return value when vma is merged after call_mmap() hugetlb_cgroup: fix offline of hugetlb cgroup with reservations mm/filemap: add static for function __add_to_page_cache_locked userfaultfd: selftests: fix SIGSEGV if huge mmap fails tools/testing/selftests/vm: fix build error mailmap: add two more addresses of Uwe Kleine-König mm/swapfile: do not sleep with a spin lock held mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING mm: list_lru: set shrinker map bit when child nr_items is not zero mm: memcg/slab: fix obj_cgroup_charge() return value handling coredump: fix core_pattern parse error zlib: export S390 symbols for zlib modules
-
Liu Zixian authored
On success, mmap should return the begin address of newly mapped area, but patch "mm: mmap: merge vma after call_mmap() if possible" set vm_start of newly merged vma to return value addr. Users of mmap will get wrong address if vma is merged after call_mmap(). We fix this by moving the assignment to addr before merging vma. We have a driver which changes vm_flags, and this bug is found by our testcases. Fixes: d70cec89 ("mm: mmap: merge vma after call_mmap() if possible") Signed-off-by:
Liu Zixian <liuzixian4@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Hongxiang Lou <louhongxiang@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Kravetz authored
Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload using hugetlbfs. In this environment the issue is reproduced by: - Start a simple pod that uses the recently added HugePages medium feature (pod yaml attached) - Start a DPDK app. It doesn't need to run successfully (as in transfer packets) nor interact with real hardware. It seems just initializing the EAL layer (which handles hugepage reservation and locking) is enough to trigger the issue - Delete the Pod (or let it "Complete"). This would result in a kworker thread going into a tight loop (top output): 1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy 'perf top -g' reports: - 63.28% 0.01% [kernel] [k] worker_thread - 49.97% worker_thread - 52.64% process_one_work - 62.08% css_killed_work_fn - hugetlb_cgroup_css_offline 41.52% _raw_spin_lock - 2.82% _cond_resched rcu_all_qs 2.66% PageHuge - 0.57% schedule - 0.57% __schedule We are spinning in the do-while loop in hugetlb_cgroup_css_offline. Worse yet, we are holding the master cgroup lock (cgroup_mutex) while infinitely spinning. Little else can be done on the system as the cgroup_mutex can not be acquired. Do note that the issue can be reproduced by simply offlining a hugetlb cgroup containing pages with reservation counts. The loop in hugetlb_cgroup_css_offline is moving page counts from the cgroup being offlined to the parent cgroup. This is done for each hstate, and is repeated until hugetlb_cgroup_have_usage returns false. The routine moving counts (hugetlb_cgroup_move_parent) is only moving 'usage' counts. The routine hugetlb_cgroup_have_usage is checking for both 'usage' and 'reservation' counts. Discussion about what to do with reservation counts when reparenting was discussed here: https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/ The decision was made to leave a zombie cgroup for with reservation counts. Unfortunately, the code checking reservation counts was incorrectly added to hugetlb_cgroup_have_usage. To fix the issue, simply remove the check for reservation counts. While fixing this issue, a related bug in hugetlb_cgroup_css_offline was noticed. The hstate index is not reinitialized each time through the do-while loop. Fix this as well. Fixes: 1adc4d41 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations") Reported-by:Adrian Moreno <amorenoz@redhat.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.comSigned-off-by:
-
Alex Shi authored
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Axel Rasmussen authored
The error handling in hugetlb_allocate_area() was incorrect for the hugetlb_shared test case. Previously the behavior was: - mmap a hugetlb area - If this fails, set the pointer to NULL, and carry on - mmap an alias of the same hugetlb fd - If this fails, munmap the original area If the original mmap failed, it's likely the second one did too. If both failed, we'd blindly try to munmap a NULL pointer, causing a SIGSEGV. Instead, "goto fail" so we return before trying to mmap the alias. This issue can be hit "in real life" by forgetting to set /proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the hugetlb_shared test. Another small improvement is, when the original mmap fails, don't just print "it failed": perror(), so we can see *why*. :) Signed-off-by:
Axel Rasmussen <axelrasmussen@google.com> Signed-off-by:
-
Xingxing Su authored
Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported when compiling protection_keys.c. Add a Arch judgment to compile "protection_keys" in the Makefile. If other arch implement this, add the arch name to the Makefile. eg: ifneq (,$(findstring $(ARCH),powerpc mips ... )) Following build errors: pkey-helpers.h:93:2: error: #error Architecture not supported #error Architecture not supported pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared #define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE) ^ protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)); ^ Signed-off-by:Xingxing Su <suxingxing@loongson.cn> Signed-off-by:
-
Uwe Kleine-König authored
This fixes attribution for the commits (among others) - d4097456 ("video/framebuffer: move the probe func into .devinit.text in Blackfin LCD driver") - 0312e024 ("mfd: mc13xxx: Add support for mc34708") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Qian Cai authored
We can't call kvfree() with a spin lock held, so defer it. Fixes a might_sleep() runtime warning. Fixes: 873d7bcf ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation") Signed-off-by:
Qian Cai <qcai@redhat.com> Signed-off-by:
-
Minchan Kim authored
While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org Fixes: e47110e9 ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by:Minchan Kim <minchan@kernel.org> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Harish Sriram <harish@linux.ibm.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.comSigned-off-by:
-
Yang Shi authored
When investigating a slab cache bloat problem, significant amount of negative dentry cache was seen, but confusingly they neither got shrunk by reclaimer (the host has very tight memory) nor be shrunk by dropping cache. The vmcore shows there are over 14M negative dentry objects on lru, but tracing result shows they were even not scanned at all. Further investigation shows the memcg's vfs shrinker_map bit is not set. So the reclaimer or dropping cache just skip calling vfs shrinker. So we have to reboot the hosts to get the memory back. I didn't manage to come up with a reproducer in test environment, and the problem can't be reproduced after rebooting. But it seems there is race between shrinker map bit clear and reparenting by code inspection. The hypothesis is elaborated as below. The memcg hierarchy on our production environment looks like: root / \ system user The main workloads are running under user slice's children, and it creates and removes memcg frequently. So reparenting happens very often under user slice, but no task is under user slice directly. So with the frequent reparenting and tight memory pressure, the below hypothetical race condition may happen: CPU A CPU B reparent dst->nr_items == 0 shrinker: total_objects == 0 add src->nr_items to dst set_bit return SHRINK_EMPTY clear_bit child memcg offline replace child's kmemcg_id with parent's (in memcg_offline_kmem()) list_lru_del() between shrinker runs see parent's kmemcg_id dec dst->nr_items reparent again dst->nr_items may go negative due to concurrent list_lru_del() The second run of shrinker: read nr_items without any synchronization, so it may see intermediate negative nr_items then total_objects may return 0 coincidently keep the bit cleared dst->nr_items != 0 skip set_bit add scr->nr_item to dst After this point dst->nr_item may never go zero, so reparenting will not set shrinker_map bit anymore. And since there is no task under user slice directly, so no new object will be added to its lru to set the shrinker map bit either. That bit is kept cleared forever. How does list_lru_del() race with reparenting? It is because reparenting replaces children's kmemcg_id to parent's without protecting from nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually deleting items from child's lru, but dec'ing parent's nr_items, so the parent's nr_items may go negative as commit 2788cf0c ("memcg: reparent list_lrus and free kmemcg_id on css offline") says. Since it is impossible that dst->nr_items goes negative and src->nr_items goes zero at the same time, so it seems we could set the shrinker map bit iff src->nr_items != 0. We could synchronize list_lru_count_one() and reparenting with nlru->lock, but it seems checking src->nr_items in reparenting is the simplest and avoids lock contention. Fixes: fae91d6d ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance") Suggested-by:Roman Gushchin <guro@fb.com> Signed-off-by:
Yang Shi <shy828301@gmail.com> Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> [4.19] Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.comSigned-off-by:
-
Roman Gushchin authored
Commit 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") introduced a regression into the handling of the obj_cgroup_charge() return value. If a non-zero value is returned (indicating of exceeding one of memory.max limits), the allocation should fail, instead of falling back to non-accounted mode. To make the code more readable, move memcg_slab_pre_alloc_hook() and memcg_slab_post_alloc_hook() calling conditions into bodies of these hooks. Fixes: 10befea9 ("mm: memcg/slab: use a single set of kmem_caches for all allocations") Signed-off-by:
-
