Skip to content

L
linux
Switch branch/tag
  1. 26 Jul, 2019 4 commits
  3. 25 Jul, 2019 9 commits
  5. 24 Jul, 2019 15 commits
    • Cong Wang's avatar
      netrom: hold sock when setting skb->destructor · 4638faac
      Cong Wang authored 
      sock_efree() releases the sock refcnt, if we don't hold this refcnt
when setting skb->destructor to it, the refcnt would not be balanced.
This leads to several bug reports from syzbot.

I have checked other users of sock_efree(), all of them hold the
sock refcnt.

Fixes: c8c8218e ("netrom: fix a memory leak in nr_rx_frame()")
Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4638faac
    • Arnd Bergmann's avatar
      ovs: datapath: hide clang frame-overflow warnings · 26063790
      Arnd Bergmann authored 
      Some functions in the datapath code are factored out so that each
one has a stack frame smaller than 1024 bytes with gcc. However,
when compiling with clang, the functions are inlined more aggressively
and combined again so we get

net/openvswitch/datapath.c:1124:12: error: stack frame size of 1528 bytes in function 'ovs_flow_cmd_set' [-Werror,-Wframe-larger-than=]

Marking both get_flow_actions() and ovs_nla_init_match_and_action()
as 'noinline_for_stack' gives us the same behavior that we see with
gcc, and no warning. Note that this does not mean we actually use
less stack, as the functions call each other, and we still get
three copies of the large 'struct sw_flow_key' type on the stack.

The comment tells us that this was previously considered safe,
presumably since the netlink parsing functions are called with
a known backchain that does not also use a lot of stack space.

Fixes: 9cc9a5cb ("datapath: Avoid using stack larger than 1024.")
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26063790
    • Jakub Kicinski's avatar
      net/tls: add myself as a co-maintainer · 47b79bbb
      Jakub Kicinski authored 
      I've been spending quite a bit of time fixing and
preventing bit rot in the core TLS code. TLS seems
to only be growing in importance, I'd like to help
ensuring the quality of our implementation.
Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Acked-by: default avatarSimon Horman <simon.horman@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      47b79bbb
    • Andreas Schwab's avatar
      net: phy: mscc: initialize stats array · f972037e
      Andreas Schwab authored 
      The memory allocated for the stats array may contain arbitrary data.

Fixes: e4f9ba64 ("net: phy: mscc: add support for VSC8514 PHY.")
Fixes: 00d70d8e ("net: phy: mscc: add support for VSC8574 PHY")
Fixes: a5afc167 ("net: phy: mscc: add support for VSC8584 PHY")
Fixes: f76178dc ("net: phy: mscc: add ethtool statistics counters")
Signed-off-by: default avatarAndreas Schwab <schwab@suse.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f972037e
    • Arseny Solokha's avatar
      net: phylink: don't start and stop SGMII PHYs in SFP modules twice · c7fa7f56
      Arseny Solokha authored 
      SFP modules connected using the SGMII interface have their own PHYs which
are handled by the struct phylink's phydev field. On the other hand, for
the modules connected using 1000Base-X interface that field is not set.

Since commit ce0aa27f ("sfp: add sfp-bus to bridge between network
devices and sfp cages") phylink_start() ends up setting the phydev field
using the sfp-bus infrastructure, which eventually calls phy_start() on it,
and then calling phy_start() again on the same phydev from phylink_start()
itself. Similar call sequence holds for phylink_stop(), only in the reverse
order. This results in WARNs during network interface bringup and shutdown
when a copper SFP module is connected, as phy_start() and phy_stop() are
called twice in a row for the same phy_device:

  % ip link set up dev eth0
  ------------[ cut here ]------------
  called from state UP
  WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0
  Modules linked in:
  CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1
  NIP:  c0227bf0 LR: c0227bf0 CTR: c004d224
  REGS: df547720 TRAP: 0700   Not tainted  (5.2.0+)
  MSR:  00029000 <CE,EE,ME>  CR: 24002822  XER: 00000000

  GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001
  GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000
  GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000
  GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00
  NIP [c0227bf0] phy_start+0x74/0xc0
  LR [c0227bf0] phy_start+0x74/0xc0
  Call Trace:
  [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable)
  [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4
  [df547828] [c023cf08] gfar_enet_open+0x364/0x374
  [df547898] [c029d870] __dev_open+0xe4/0x140
  [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188
  [df5478f8] [c029dc28] dev_change_flags+0x20/0x54
  [df547918] [c02ae304] do_setlink+0x310/0x818
  [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
  [df547c28] [c02b222c] rtnl_newlink+0x48/0x68
  [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
  [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
  [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c
  [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
  [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
  [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
  [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84
  [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204
  [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38
  --- interrupt: c01 at 0xfd4e030
      LR = 0xfd4e010
  Instruction dump:
  813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e
  3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0
  ---[ end trace d4c095aeaf6ea998 ]---

and

  % ip link set down dev eth0
  ------------[ cut here ]------------
  called from state HALTED
  WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88

  <...>

  Call Trace:
  [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable)
  [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44
  [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c
  [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44
  [df581858] [c0225608] phylink_stop+0x7c/0xe4
  [df581868] [c023c57c] stop_gfar+0x7c/0x94
  [df581888] [c023c5b8] gfar_close+0x24/0x94
  [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8
  [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188
  [df5818f8] [c029dc28] dev_change_flags+0x20/0x54
  [df581918] [c02ae304] do_setlink+0x310/0x818
  [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
  [df581c28] [c02b222c] rtnl_newlink+0x48/0x68
  [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
  [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
  [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c
  [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
  [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
  [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
  [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84
  [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204
  [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38

  <...>

  ---[ end trace d4c095aeaf6ea999 ]---

SFP modules with the 1000Base-X interface are not affected.

Place explicit calls to phy_start() and phy_stop() before enabling or after
disabling an attached SFP module, where phydev is not yet set (or is
already unset), so they will be made only from the inside of sfp-bus, if
needed.

Fixes: 21796261 ("net: phy: warn if phy_start is called from invalid state")
Signed-off-by: default avatarArseny Solokha <asolokha@kb.kras.ru>
Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c7fa7f56
    • David S. Miller's avatar
      Merge tag 'linux-can-fixes-for-5.3-20190724' of... · 09ea2679
      David S. Miller authored 
      Merge tag 'linux-can-fixes-for-5.3-20190724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-07-24

this is a pull reqeust of 7 patches for net/master.

The first patch is by Rasmus Villemoes add a missing netif_carrier_off() to
register_candev() so that generic netdev trigger based LEDs are initially off.

Nikita Yushchenko's patch for the rcar_canfd driver fixes a possible IRQ storm
on high load.

The patch by Weitao Hou for the mcp251x driver add missing error checking to
the work queue allocation.

Both Wen Yang's and Joakim Zhang's patch for the flexcan driver fix a problem
with the stop-mode.

Stephane Grosjean contributes a patch for the peak_usb driver to fix a
potential double kfree_skb().

The last patch is by YueHaibing and fixes the error path in can-gw's
cgw_module_init() function.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      09ea2679
    • Haishuang Yan's avatar
      ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6 · 3bc817d6
      Haishuang Yan authored 
      Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull()
which may change skb->data, so we need to re-load ipv6h at
the right place.

Fixes: 898b2979 ("ip6_gre: Refactor ip6gre xmit codes")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: default avatarHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: default avatarWilliam Tu <u9012063@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bc817d6
    • Pavel Machek's avatar
      net/ipv4: cleanup error condition testing · c7148c03
      Pavel Machek authored 
      Cleanup testing for error condition.
Signed-off-by: default avatarPavel Machek <pavel@denx.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c7148c03
    • YueHaibing's avatar
      can: gw: Fix error path of cgw_module_init · b7a14297
      YueHaibing authored 
      This patch add error path for cgw_module_init to avoid possible crash if
some error occurs.

Fixes: c1aabdf3 ("can-gw: add netlink based CAN routing")
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Acked-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      b7a14297
    • Stephane Grosjean's avatar
      can: peak_usb: fix potential double kfree_skb() · fee6a892
      Stephane Grosjean authored 
      When closing the CAN device while tx skbs are inflight, echo skb could
be released twice. By calling close_candev() before unlinking all
pending tx urbs, then the internal echo_skb[] array is fully and
correctly cleared before the USB write callback and, therefore,
can_get_echo_skb() are called, for each aborted URB.

Fixes: bb478555 ("can: usb: PEAK-System Technik USB adapters driver core")
Signed-off-by: default avatarStephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      fee6a892
    • Joakim Zhang's avatar
      can: flexcan: fix stop mode acknowledgment · 5f186c25
      Joakim Zhang authored 
      To enter stop mode, the CPU should manually assert a global Stop Mode
request and check the acknowledgment asserted by FlexCAN. The CPU must
only consider the FlexCAN in stop mode when both request and
acknowledgment conditions are satisfied.

Fixes: de3578c1 ("can: flexcan: add self wakeup support")
Reported-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: default avatarJoakim Zhang <qiangqing.zhang@nxp.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v5.0
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      5f186c25
    • Wen Yang's avatar
      can: flexcan: fix an use-after-free in flexcan_setup_stop_mode() · e9f2a856
      Wen Yang authored 
      The gpr_np variable is still being used in dev_dbg() after the
of_node_put() call, which may result in use-after-free.

Fixes: de3578c1 ("can: flexcan: add self wakeup support")
Signed-off-by: default avatarWen Yang <wen.yang99@zte.com.cn>
Cc: linux-stable <stable@vger.kernel.org> # >= v5.0
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      e9f2a856
    • Weitao Hou's avatar
      can: mcp251x: add error check when wq alloc failed · 375f7558
      Weitao Hou authored 
      add error check when workqueue alloc failed, and remove redundant code
to make it clear.

Fixes: e0000163 ("can: Driver for the Microchip MCP251x SPI CAN controllers")
Signed-off-by: default avatarWeitao Hou <houweitaoo@gmail.com>
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Tested-by: default avatarSean Nyekjaer <sean@geanix.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      375f7558
    • Nikita Yushchenko's avatar
      can: rcar_canfd: fix possible IRQ storm on high load · d4b890ae
      Nikita Yushchenko authored 
      We have observed rcar_canfd driver entering IRQ storm under high load,
with following scenario:
- rcar_canfd_global_interrupt() in entered due to Rx available,
- napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state
- Rx fifo interrupts are masked,
- rcar_canfd_global_interrupt() is entered again, this time due to
  error interrupt (e.g. due to overflow),
- since scheduled napi poller has not yet executed, condition for calling
  napi_schedule_prep() from rcar_canfd_global_interrupt() remains true,
  thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag
  in state,
- later, napi poller function rcar_canfd_rx_poll() gets executed, and
  calls napi_complete_done(),
- due to NAPIF_STATE_MISSED flag in state, this call does not clear
  NAPIF_STATE_SCHED flag from state,
- on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx
  interrutps,
- Rx interrupt happens, rcar_canfd_global_interrupt() gets called
  and calls napi_schedule_prep(),
- since NAPIF_STATE_SCHED is set in state at this time, this call
  returns false,
- due to that false return, rcar_canfd_global_interrupt() returns
  without masking Rx interrupt
- and this results into IRQ storm: unmasked Rx interrupt happens again
  and again is misprocessed in the same way.

This patch fixes that scenario by unmasking Rx interrupts only when
napi_complete_done() returns true, which means it has cleared
NAPIF_STATE_SCHED in state.

Fixes: dd3bd23e ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Signed-off-by: default avatarNikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      d4b890ae
    • Rasmus Villemoes's avatar
      can: dev: call netif_carrier_off() in register_candev() · c6384560
      Rasmus Villemoes authored 
      CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev
trigger as suggested, there's a small inconsistency with the link
property: The LED is on initially, stays on when the device is brought
up, and then turns off (as expected) when the device is brought down.

Make sure the LED always reflects the state of the CAN device.
Signed-off-by: default avatarRasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      c6384560
  7. 23 Jul, 2019 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7