- 11 Jan, 2005 40 commits
-
-
William Lee Irwin III authored
This driver is using some private #ifdef to try to control the use of partitions and calling functions that get compiled out of the kernel if it's set (which it is by default). This results in unresolved module symbols, which are bad. This patch synchronizes the conditional compilation of partition management in the driver with the global config option for MTD partition management and thereby fixes the unresolved symbol problem. Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
William Lee Irwin III authored
There are some string tables only used for debugging printk()'s in IRDA that trip warnings when CONFIG_IRDA_DEBUG is not set. This patch makes them conditional on CONFIG_IRDA_DEBUG to silence warnings. Signed-off-by:
-
William Lee Irwin III authored
Multiple format -related warnings arise from size_t issues. This patch peppers the seq_printf()'s with 'z' qualifiers and casts to silence them all. Signed-off-by:
-
William Lee Irwin III authored
The printk() of a size_t is off, tripping a warning. This patch qualifies the integer format with a 'z' to suppress the warning. Signed-off-by:
-
Christoph Hellwig authored
UMSDOS has been non-function since early 2.5 and would need a major rewrite to be resurrected (which I don't hope anyone plans as it's a really horrible hack) From: Adrian Bunk <bunk@stusta.de> With umsdos gone, there's no longer a MAINTAINERS entry required. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Christoph Hellwig authored
These don't exist on SMP at all, at least warn on compiling for UP. Signed-off-by:
-
Christoph Hellwig authored
Pass around pointers instead of indices into a global array between various files of the virtual console implementation and stop using obsfucting macros that expect certain variables to be in scope. This is a first step to get rid of the various global arrays in the VC code. Signed-off-by:
-
Jürgen Quade authored
There is some (obvious) mess with "unsigned int" and "int" in the deadline-io-scheduler (sysfs-section). Try to change the attribute "writes_starved": root@ezs-mobil:/sys/block/hda/queue# cat scheduler noop anticipatory [deadline] root@ezs-mobil:/sys/block/hda/queue# cd iosched/ root@ezs-mobil:/sys/block/hda/queue/iosched# ls fifo_batch front_merges read_expire write_expire writes_starved root@ezs-mobil:/sys/block/hda/queue/iosched# cat writes_starved 2 root@ezs-mobil:/sys/block/hda/queue/iosched# echo 4 >writes_starved root@ezs-mobil:/sys/block/hda/queue/iosched# cat writes_starved -2147483648 root@ezs-mobil:/sys/block/hda/queue/iosched# Because all attribute-variables are defined as "int", the patch below changes them to "int". Now it works as expected... Signed-off-by:
Juergen Quade <quade@hsnr.de> Signed-off-by:
-
Alan Cox authored
The ide-cd code has never been updated over the years to include printk levels. This patch extracts the printk level updating from the -ac tree seperated from other changes. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Yoichi Yuasa authored
This patch has added NEC uPD29F064115 support to jedec_probe.c. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Domen Puncer authored
Remove nowhere referenced file. (egrep "filename\." didn't find anything) Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Domen Puncer authored
Remove nowhere referenced file. (egrep "filename\." didn't find anything) Signed-off-by:
-
Pavel Machek authored
Telling user machine will crash with default loglevel is nice joke, it at least needs worse severity. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Pavel Machek authored
Signed-off-by:
-
Oleg Nesterov authored
This patch changes list_for_each_xxx iterators from: for (pos = (head)->next, prefetch(pos->next); pos != (head); pos = pos->next, prefetch(pos->next)) to: for (pos = (head)->next; prefetch(pos->next), pos != (head); pos = pos->next) Reduces my vmlinux .text size by 4401 bytes. Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Domen Puncer authored
No need for an array here. Therefore no need to worry about possible overflows. seq_printf() can handle this. Signed-off-by:
walter harms <wharms@bfs.de> Signed-off-by:
-
Domen Puncer authored
proc_pid_wchan() uses a 128-Byte array for something that can change its size via define. Signed-off-by:
-
Steffen Klassert authored
With this the driver supports the ethtool_ops {get,set}_msglvl, {get,set}_settings, get_stats, get_link, and nway_reset. Unlike the first patch, the userspace ioctl functions are protected with spin_lock_irqsave. Furter I moved the spin_lock_bh from the mdio_{read,write} functions to vortex_timer(). All the locks acquire vp->lock now, vp->mdio_lock is not used any more. Signed-off-by:Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by:
-
Hugh Dickins authored
3c59x now uses generic_mii_ioctl, so VORTEX should select MII. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Steffen Klassert authored
With this patch the driver makes use of the MII lib helper function generic_mii_ioctl. Patch is tested with the mii-diag tool and a 3c905-TX, 3c905B-TX NIC. Signed-off-by:
-
Steffen Klassert authored
Patch changes the two remaining direct accessing of dev->priv to netdev_priv. Signed-off-by:
-
François Romieu authored
It is possible to remove the device without calling pci_disable_device(). A leak can take place during the init as well. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Nathan Bryant authored
The problem is that under the new PCI driver model, cards are required to always restore state and call pci_enable_device() on resume. So the patch changes the driver to do its restore state calls unconditionally (it used to only do them when it was configured for wake-on-lan) and adds a call to pci_enable_device(). Signed-off-by:
-
John W. Linville authored
Add 3c900 Boomerang to list of devices needing EEPROM_RESET Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
John W. Linville authored
Remove the EEPROM_RESET flag for the 3c905B cards. Signed-off-by:
-
John W. Linville authored
Enable reload of EEPROM values in reset at rmmod for cards that need it, similar to old EEPROM_NORESET flag but in reverse. (Most?) 3c905 and (some?) 3c905B cards need an additional bit unmasked in the reset at rmmod or else they don't get reinitialized properly when the driver is reloaded. Signed-of-by:
-
Adrian Bunk authored
InterMezzo was removed in 2.6, so there's no reason for keeping a MAINTAINERS entry. Signed-off-by:
-
Prasanna Meda authored
Correct double accounting of elf_buflen in read_kcore:get_kcore_size(). Signed-off-by:
Prasanna Meda <pmeda@akamai.com> Signed-off-by:
-
Roland Dreier authored
Export get_sb_pseudo() so that modules can create unmountable pseudo-filesystems cleanly. Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Oleg Drokin authored
This patch below is needed to suppress the warning, with more than one indirect block insertion at a time, it is now possible to split indirect items as well and there were reports on lkml from people who seen this warning and were worried about it. To be on the safe side, I consulted with Vladimir Saveliev and he said that the change is safe to do indeed. Signed-off-by:
-
Mike Miller authored
This patch removes support for 2 controllers that were recently cancelled and it adds support for the P600, a cciss based SAS controller due to ship in late March/early April '05. Neither of these controllers have made it to the field. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Matt Mackall authored
Remove random pool resizing sysctl. It's racy in hard to fix ways and doesn't really warrant fixing. It also only allows adjusting the input pool size so it's either obsolete or incomplete. The default 4kbits (512 bytes) of entropy pool should be more than big enough for all purposes and too small to be a memory concern. This patch removes the resizing code and marks the sysctl read-only. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Matt Mackall authored
Whitespace cleanups trailing whitespace removal superfluous brace removal Signed-off-by:
-
Christoph Hellwig authored
On Fri, Dec 10, 2004 at 11:04:22AM +1100, Nathan Scott wrote: > The bug# for the write deadlock I mentioned earlier -- 925836. I finally found some time to look at it, and this fix is almost trivial. XFS doesn't need the i_alloc_sem at all, so we should avoid taking it in direct-io.c completely. As a side-effect it makes the code a little bit simpler even. Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Remove nowhere referenced files Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
MMC_WBSD depends on ISA (needs isa_virt_to_bus()) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Update defconfigs for 2.6.10 Signed-off-by:
-
Hirokazu Takata authored
We, Linux/M32R project members, decided to change the kernel API/ABI. This modification is not small, but if we don't change it now, perhaps we have no chance to change them hereafter. * Why change the m32r kernel API/ABI? - The m32r port has many old-style syscall interfaces, because we made m32r port refering to the other traditional archs. Some old syscalls are no longer used or can be safely removed by upgrading the GNU C library. - To make the m32r kernel more secure, it is preferable to prevent stack region from being executed. (e.g. stack overflow) * API/ABI changes - include/asm-m32r/unistd.h: Upgrade to the new kernel API. - arch/m32r/entry.S: Minimum update to the new ABI. - Don't use UID16 syscalls. - To make stack noexecutable: 1) Don't use trampoline for signal handlers for kernel space (cf. sparc64): sys_signal: remove. sys_sigaction, sys_rt_sigaction: use glibc's restorer. 2) Don't generate trampoline code by GCC in userspace: Support non-executable stack by the m32r gcc. --> done (for gcc-3.4.3/gcc-4.0) * New userland - This modification does *not* keep backward compatibility. So we have been prepared new userland, based on the new API/ABI. Already, more than 200 new Debian deb binary packages are available on the Linux/M32R site: http://debian.linux-m32r.org/dists/04_ordovician/ (for this new ABI) Signed-off-by:NIIBE Yutaka <gniibe@fsij.org> Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Barry K. Nathan authored
During resume, my previous patch switches over to the saved swsusp image without suspending all devices first. This patch fixes that oversight, so that the state of the hardware upon resume more closely matches the state it had at suspend time. While my previous patch alone seemed to work fine in my testing, it is not fully correct without this as well. Signed-off-by:
Barry K. Nathan <barryn@pobox.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Barry K. Nathan authored
Since at least kernel 2.6.9, if not earlier, swsusp fails to properly suspend and resume all devices. The most notable effect is that resuming fails to properly reconfigure interrupt routers. In 2.6.9 this was obscured by other kernel code, but in 2.6.10 this often causes post-resume APIC errors and near-total failure of some PCI devices (e.g. network, sound and USB controllers). Even in cases where interrupt routing is unaffected, this bug causes other problems. For instance, on one of my systems I have to run "ifdown eth0;ifup eth0" after resume in order to have functional networking, if I do not apply this patch. By itself, this patch is not theoretically complete; my next patch fixes that. However, this patch is the critical one for fixing swsusp's behavior in the real world. Signed-off-by:
-
