- 05 Oct, 2021 31 commits
-
-
Mike McGowen authored
Add support for the new extended formats in the data returned from the Report Physical LUNs command for controllers that enable this feature. The new formats allow the reporting of 16-byte WWIDs. Link: https://lore.kernel.org/r/20210928235442.201875-8-don.brace@microchip.comReviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Acked-by:
John Donnelly <john.p.donnelly@oracle.com> Signed-off-by:
Mike McGowen <Mike.McGowen@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Mahesh Rajashekhara authored
Prevent kernel crash by failing outstanding I/O request when the OS takes device offline. When posted I/Os to the controller's inbound queue are not picked by the controller, the driver will halt the controller and take the controller offline. When the driver takes the controller offline, the driver will fail all the outstanding requests which can sometimes lead to an OS crash. Link: https://lore.kernel.org/r/20210928235442.201875-7-don.brace@microchip.comReviewed-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by:
-
Don Brace authored
Send a TEST UNIT READY to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (SANITIZE IN PROGRESS) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing a sanitize operation. According to SCSI SBC4 specification section 4.11.2 "Commands allowed during SANITIZE", some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until SANITIZE has completed. This can take hours. According to document HPE Smart Storage Administrator User Guide, during the sanitize erase operation, the drive is unusable. I.e. the expected behavior for SANITIZE is the that disk remains offline even after SANITIZE has completed. The customer is expected to re-enable the disk using the management utility. Link: https://lore.kernel.org/r/20210928235442.201875-6-don.brace@microchip.comReviewed-by:
-
Kevin Barnett authored
Enhance check for commands queued to the controller. Add new function pqi_nonempty_inbound_queue_count() that will wait for all I/O queued for submission to controller across all queue groups to drain. Add helper functions to obtain queue command counts for each queue group. These queues should drain quickly as they are already staged to be submitted down to the controller's IB queue. Enhance check for outstanding command completion. Update the count of outstanding commands while waiting. This value was not re-obtained and was potentially causing infinite wait for all completions. Link: https://lore.kernel.org/r/20210928235442.201875-5-don.brace@microchip.comReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
-
Murthy Bhat authored
In some rare cases, the driver can halt the controller. Add a reason code describing why the controller was halted. Store this reason code in a controller register to aid in debugging the issue. Link: https://lore.kernel.org/r/20210928235442.201875-4-don.brace@microchip.comReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Mahesh Rajashekhara authored
Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.comReviewed-by:
-
Don Brace authored
Update device removal path to handle issues for: - rmmod: Correct stack trace when removing devices. - rmmod: Synchronize SCSI cache. - Update handling for removing devices using sysfs. Link: https://lore.kernel.org/r/20210928235442.201875-2-don.brace@microchip.comReviewed-by:
-
Dan Carpenter authored
This function is more complicated than necessary. If we change from scnprintf() to snprintf() that lets us remove the if bytes_wrote < sizeof(protocol) checks. Also, we can use bytes_wrote ? "," : "" to print the comma and remove the separate if statement and the "is_string_nonempty" variable. [mkp: a few formatting cleanups and s/wrote/written/] Link: https://lore.kernel.org/r/20210916132605.GF25094@kiliSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Igor Pylypiv authored
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a SET_NVMD_DATA response, as the log statement implies. Fixes: 1f889b58 ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition") Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.comReviewed-by:
Changyuan Lyu <changyuanl@google.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Igor Pylypiv <ipylypiv@google.com> Signed-off-by:
-
Igor Pylypiv authored
This is a follow up cleanup to the commit 924a3541 ("scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()") Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.comReviewed-by:
Vishakha Channapattan <vishakhavc@google.com> Acked-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Link: https://github.com/KSPP/linux/issues/160 Link: https://lore.kernel.org/r/20210927224344.GA190701@embeddedorReviewed-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-8-d.bogdanov@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-7-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-6-d.bogdanov@yadro.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-5-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-4-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Remove tpg/enable attribute. Add fabric ops enable_tpg implementation instead. Link: https://lore.kernel.org/r/20210910084133.17956-3-d.bogdanov@yadro.comReviewed-by:
-
Dmitry Bogdanov authored
Many fabric modules provide their own implementation of enable attribute in tpg. Provide a way to remove code duplication in the fabric modules and automatically add "enable" attribute if a fabric module has an implementation of fabric_enable_tpg(). Link: https://lore.kernel.org/r/20210910084133.17956-2-d.bogdanov@yadro.comReviewed-by:
-
Sumit Saxena authored
Link: https://lore.kernel.org/r/20210929124022.24605-4-sumit.saxena@broadcom.comSigned-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Sumit Saxena authored
Adding helper functions for ISR access and release to improve readability. Link: https://lore.kernel.org/r/20210929124022.24605-3-sumit.saxena@broadcom.comSigned-off-by:
-
Sumit Saxena authored
IRQ polling thread calls ISR after enable_irq() to handle any missed I/O completion. The atomic flag "in_used" was added to have the synchronization between the IRQ polling thread and the interrupt context. There is a bug around it leading to a race condition. Below is the sequence: - IRQ polling thread accesses ISR, fetches the reply descriptor. - Real interrupt arrives and pre-empts polling thread (enable_irq() is already called). - Interrupt context picks the same reply descriptor as fetched by polling thread, processes it, and exits. - Polling thread resumes and processes the descriptor which is already processed by interrupt thread leads to kernel crash. Setting the "in_used" flag before fetching the reply descriptor ensures synchronized access to ISR. Link: https://www.spinics.net/lists/linux-scsi/msg159440.html Link: https://lore.kernel.org/r/20210929124022.24605-2-sumit.saxena@broadcom.com Fixes: 9bedd36e ("scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs") Signed-off-by:
-
Guo Zhi authored
Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cnSigned-off-by:
Guo Zhi <qtxuning1999@sjtu.edu.cn> Signed-off-by:
-
Konstantin Shelekhin authored
Change the log level of the following message to debug: Unsupported SCSI Opcode 0xXX, sending CHECK_CONDITION. This message is mostly helpful during debugging sessions in order to understand errors on the initiator side. But most of the time it's just useless and makes reading logs much harder. It gets particularly annoying if there are many initiators that come and go or if an initiator runs a program that does not care whether the command is supported and just keeps sending it. Link: https://lore.kernel.org/r/20210929114959.705852-1-k.shelekhin@yadro.comReviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
-
Adrian Hunter authored
Callers of ufshcd_err_handler() expect it to return in an operational state. However, the code does not check the state before exiting. Add a check for the state and perform retries until either success or the maximum number of retries is reached. Link: https://lore.kernel.org/r/20211002154550.128511-3-adrian.hunter@intel.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
Callers of ufshcd_reset_and_restore() expect it to return in an operational state. However, the code only checks direct errors and so the ufshcd_state may not be UFSHCD_STATE_OPERATIONAL due to error interrupts. Fix by also checking ufshcd_state, still allowing non-fatal errors which are left for the error handler to deal with. Link: https://lore.kernel.org/r/20211002154550.128511-2-adrian.hunter@intel.comReviewed-by:
-
Bart Van Assche authored
Commit aa53f580 ("scsi: ufs: Minor adjustments to error handling") introduced a ufshcd_clear_ua_wluns() call in ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter, this can trigger a deadlock. Avoid that deadlock by removing the code that clears the unit attention. This is safe because the only software that relies on clearing unit attentions is the Android Trusty software and because support for handling unit attentions has been added in the Trusty software. See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/ Note that "scsi: ufs: Retry START_STOP on UNIT_ATTENTION" is a prerequisite for this commit. Link: https://lore.kernel.org/r/20211001182015.1347587-3-jaegeuk@kernel.org Fixes: aa53f580 ("scsi: ufs: Minor adjustments to error handling") Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Bart Van Assche <bvanassche@google.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
Commit 57d104c1 ("ufs: add UFS power management support") made the UFS driver submit a REQUEST SENSE command before submitting a power management command to a WLUN to clear the POWER ON unit attention. Instead of submitting a REQUEST SENSE command before submitting a power management command, retry the power management command until it succeeds. This is the preparation to get rid of all UNIT ATTENTION code which should be handled by users. Link: https://lore.kernel.org/r/20211001182015.1347587-2-jaegeuk@kernel.org Cc: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
-
Bean Huo authored
Return statement is not useful at the end of "void" function. Link: https://lore.kernel.org/r/20210929200640.828611-4-huobean@gmail.comSigned-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Bean Huo authored
Since commit 568dd995 ("scsi: ufs: Rename the second ufshcd_probe_hba() argument"), the second ufshcd_probe_hba() argument has been changed to init_dev_params. Link: https://lore.kernel.org/r/20210929200640.828611-3-huobean@gmail.com Fixes: 568dd995 ("scsi: ufs: Rename the second ufshcd_probe_hba() argument") Reviewed-by:
-
Bean Huo authored
Calling ufshcd_rpm_{get/put}_sync() prior to ufshcd_scsi_add_wlus() being called will trigger a NULL pointer dereference. This is because hba->sdev_ufs_device is initialized in ufshcd_scsi_add_wlus(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000348 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000348] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 91 Comm: kworker/u16:1 Not tainted 5.15.0-rc1-beanhuo-linaro-1423 Hardware name: MicronRB (DT) Workqueue: events_unbound async_run_entry_fn pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : pm_runtime_drop_link+0x128/0x338 lr : ufshpb_get_dev_info+0x8c/0x148 sp : ffff800012573c10 x29: ffff800012573c10 x28: 0000000000000000 x27: 0000000000000003 x26: ffff000001d21298 x25: 000000005abcea60 x24: ffff800011d89000 x23: 0000000000000001 x22: ffff000001d21880 x21: ffff000001ec9300 x20: 0000000000000004 x19: 0000000000000198 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000041400 x14: 5eee00201100200a x13: 000000000000bb03 x12: 0000000000000000 x11: 0000000000000100 x10: 0200000000000000 x9 : bb0000021a162c01 x8 : 0302010021021003 x7 : 0000000000000000 x6 : ffff800012573af0 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000200 x2 : 0000000000000348 x1 : 0000000000000348 x0 : ffff80001095308c Call trace: pm_runtime_drop_link+0x128/0x338 ufshpb_get_dev_info+0x8c/0x148 ufshcd_probe_hba+0xda0/0x11b8 ufshcd_async_scan+0x34/0x330 async_run_entry_fn+0x38/0x180 process_one_work+0x1f4/0x498 worker_thread+0x48/0x480 kthread+0x140/0x158 ret_from_fork+0x10/0x20 Code: 88027c01 35ffffa2 17fff6c4 f9800051 (885f7c40) ---[ end trace 2ba541335f595c95 ] ufshpb_get_dev_info() is only called during asynchronous scanning and at that time pm_runtime_get_sync() has been called: ... /* Hold auto suspend until async scan completes */ pm_runtime_get_sync(dev); atomic_set(&hba->scsi_block_reqs_cnt, 0); ... ufshcd_async_scan() ufshcd_probe_hba(hba, true); ufshcd_device_params_init(hba); ufshpb_get_dev_info(); ... pm_runtime_put_sync(hba->dev); Remove ufshcd_rpm_{get/put}_sync() from ufshpb_get_dev_info() to fix this problem. Link: https://lore.kernel.org/r/20210929200640.828611-2-huobean@gmail.com Fixes: 351b3a84 ("scsi: ufs: ufshpb: Use proper power management API") Signed-off-by: -
Bart Van Assche authored
The typo in this source code comment makes the comment confusing. Clear up the confusion by fixing the typo. Link: https://lore.kernel.org/r/20210929182318.2060489-1-bvanassche@acm.org Fixes: bc85dc50 ("scsi: remove scsi_end_request") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 29 Sep, 2021 9 commits
-
-
Damien Le Moal authored
For devices that explicitly asked for MODE SENSE(10) use, make sure that scsi_mode_sense() is called with a buffer of at least 8 bytes so that the sense header fits. Link: https://lore.kernel.org/r/20210820070255.682775-4-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Damien Le Moal authored
The MODE SELECT(6) command allows handling mode page buffers that are up to 255 bytes, including the 4 byte header needed in front of the page buffer. For requests larger than this limit, automatically use the MODE SELECT(10) command. In both cases, since scsi_mode_select() adds the mode select page header, checks on the buffer length value must include this header size to avoid overflows of the command CDB allocation length field. While at it, use put_unaligned_be16() for setting the header block descriptor length and CDB allocation length when using MODE SELECT(10). [mkp: fix MODE SENSE vs. MODE SELECT confusion] Link: https://lore.kernel.org/r/20210820070255.682775-3-damien.lemoal@wdc.comSigned-off-by:
-
Damien Le Moal authored
Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev->use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was. Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.comSigned-off-by: -
John Garry authored
Since commit 0653c358 ("scsi: Drop gdth driver"), functions scsi_{get,free}_host_dev() no longer have any in-tree users, so delete them. Link: https://lore.kernel.org/r/1631528047-30150-1-git-send-email-john.garry@huawei.comReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Hannes Reinecke <hare@suse.de>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/3899b1ed4abac581c30845d82f33ec6df8b38976.1629633207.git.christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Asutosh Das authored
Qualcomm controller needs to be in hibern8 before scaling clocks. This change puts the controller in hibern8 state before scaling and brings it out after scaling of clocks. Link: https://lore.kernel.org/r/212b7aaf6d834c4a8c682fdac4a59b84013ed573.1632818942.git.nguyenb@codeaurora.orgReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
Bao D. Nguyen <nguyenb@codeaurora.org> Signed-off-by:
-
Asutosh Das authored
Qualcomm controllers need to be in hibern8 before scaling up or down the clocks. Hence, export the hibern8 entry and exit functions. Link: https://lore.kernel.org/r/a29bfdd0c8f1d1a3e5fb69e43ea277c97a7f0cb6.1632818942.git.nguyenb@codeaurora.orgReviewed-by:
-
James Smart authored
At adapter attachment or SLI port initialization, read the SLIPORT_STATUS register to check for pldv_enable. If found, the driver will perform a PCIe configuration space write when attaching to an SLI port instance that is an LPe32000 series adapter. Link: https://lore.kernel.org/r/20210927183518.22130-1-jsmart2021@gmail.comCo-developed-by:
Nigel Kirkland <nkirkland2304@gmail.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Anders Roxell authored
When building an allmodconfig kernel, the following build error shows up: aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_probe': /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:177: undefined reference to `hwmon_device_register_with_info' /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:177:(.text+0x510): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_device_register_with_info' aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_remove': /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:195: undefined reference to `hwmon_device_unregister' /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:195:(.text+0x5c8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_device_unregister' aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_notify_event': /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:206: undefined reference to `hwmon_notify_event' /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:206:(.text+0x64c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_notify_event' aarch64-linux-gnu-ld: /home/anders/src/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:209: undefined reference to `hwmon_notify_event' /kernel/next/drivers/scsi/ufs/ufs-hwmon.c:209:(.text+0x66c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_notify_event' Since SCSI_UFS_HWMON can't be built as a module, SCSI_UFS_HWMON has to depend on HWMON=y. Link: https://lore.kernel.org/r/20210927084615.1938432-1-anders.roxell@linaro.org Fixes: e88e2d32 ("scsi: ufs: core: Probe for temperature notification support") Also-reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
