- 06 Dec, 2023 24 commits
-
-
Dan Carpenter authored
The i2c_master_send/recv() functions return negative error codes or they return "len" on success. So the error handling here can be written as just normal checks for "if (ret < 0) return ret;". No need to complicate things. Btw, in this code the "len" parameter can never be zero, but even if it were, then I feel like this would still be the best way to write it. Fixes: 91443799 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
This function is only used when debugfs is enabled, and otherwise causes a build warning: drivers/gpu/drm/imagination/pvr_fw_trace.c:135:1: error: 'update_logtype' defined but not used [-Werror=unused-function] Move the #ifdef check to include this function as well. Fixes: cb56cd61 ("drm/imagination: Add firmware trace to debugfs") Acked-by:
Frank Binns <frank.binns@imgtec.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231204073231.1164163-1-arnd@kernel.orgSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Donald Robson authored
Fixing the warning below due to an unused file level vtable. Removing only this causes additional warnings for the now unused functions, so I've removed those too. >> drivers/gpu/drm/imagination/pvr_fw_trace.c:205:37: warning: 'pvr_fw_trace_group_mask_fops' defined but not used [-Wunused-const-variable=] 205 | static const struct file_operations pvr_fw_trace_group_mask_fops = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - Corrected hash in Fixes tag. Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311302054.MVYPxFCE-lkp@intel.com/ Fixes: cb56cd61 ("drm/imagination: Add firmware trace to debugfs") Signed-off-by:
Donald Robson <donald.robson@imgtec.com> Signed-off-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements for <drm/drm_plane_helper.h>. The file contains helpers for non-atomic code and should not be required by most drivers. No functional changes. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
The udl driver is the only caller of drm_plane_helper_atomic_check(). Move the function into the driver. No functional changes. v2: * fix documenation (Sui) Signed-off-by:
-
Thomas Zimmermann authored
Remove CONFIG_DRM_LEGACY from Kconfig. Nothing depends on the option. Signed-off-by:
David Airlie <airlied@gmail.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
-
Thomas Zimmermann authored
The AGP subsystem supports a user-space interface via /dev/agpgart. It is only enabled with DRM support for mode setting in user space. (i.e., CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option will go away. Hence remove the AGP frontend. Modern DRM drivers with kernel mode setting handle AGP support internally. Signed-off-by:
-
Thomas Zimmermann authored
Remove all remaining source code for non-KMS drivers. These drivers have been removed in v6.3 and won't comeback. Signed-off-by:
-
Thomas Zimmermann authored
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls for user-space mode setting used to acquire drm_global_mutex. After removing the ioctl entry points, also remove the locking code. The only legacy ioctl without global locking was VBLANK_WAIT, which has been removed as well. Hence remove the related DRM_UNLOCKED flag. Signed-off-by:
-
Thomas Zimmermann authored
Remove all hooks and calls into code for user-space mode setting from the DRM core. Without the drivers and ioctl entry points, none of this is required any longer. Signed-off-by:
-
Thomas Zimmermann authored
DRM drivers with user-space mode setting have been removed in Linux v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking any of the ioctl ops will unconditionally return -EINVAL to user space. Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the original commit 29935554 ("drm: Disallow DRM_IOCTL_MODESET_CTL for KMS drivers") it is not apparent how or why the operation differs from the others. It is likely just an oversight in commit 61ae2270 ("drm: allow removal of legacy codepaths (v4.1)"), which allowed disabling leagacy ioctls in the first place. Still keep this removal separate from the other ioctls to allow an easy revert, if necessary. Signed-off-by:
-
Thomas Zimmermann authored
DRM drivers with user-space mode setting have been removed in Linux v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking any of the ioctl ops will unconditionally return -EINVAL to user space. This has already been the behavior for kernels without CONFIG_DRM_LEGACY set. Signed-off-by:
-
Thomas Zimmermann authored
Including <drm/drm_legacy.h> is not required by radeon. Signed-off-by:
-
Thomas Zimmermann authored
Include <drm/drm_device.h> in drm_ioc32.c. Resolves a depenency on <drm/drm_legacy.h>, which will be removed. Signed-off-by:
-
Thomas Zimmermann authored
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by:
-
Thomas Zimmermann authored
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122122449.11588-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
One of the source files includes <drm/drm_auth.h> via <drm/drm_legacy.h>, which will be removed. Include drm_auth.h directly. Signed-off-by:
-
Thomas Zimmermann authored
Non-KMS drivers have been removed from DRM. Update the TODO list accordingly. Signed-off-by:
-
- 05 Dec, 2023 16 commits
-
-
Pin-yen Lin authored
Move the order of CMN 0x14e5 to make the list sorted. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231205123630.988663-3-treapking@chromium.org
-
Abel Vesa authored
Add support for the SDC ATNA45AF01 panel. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
The drm_atomic_print_new_state() already prints private object state via drm_atomic_private_obj_print_state(). Add private object state dumping to __drm_state_dump(), so that it is also included into drm_state_dump() output and into debugfs/dri/N/state file. Reviewed-by:
Rob Clark <robdclark@gmail.com> Acked-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203000532.1290480-2-dmitry.baryshkov@linaro.org
-
Boris Brezillon authored
Some users need to release resources attached to the vm_bo object when it's destroyed. In Panthor's case, we need to release the pin ref so BO pages can be returned to the system when all GPU mappings are gone. This could be done through a custom drm_gpuvm::vm_bo_free() hook, but this has all sort of locking implications that would force us to expose a drm_gem_shmem_unpin_locked() helper, not to mention the fact that having a ::vm_bo_free() implementation without a ::vm_bo_alloc() one seems odd. So let's keep things simple, and extend drm_gpuvm_bo_put() to report when the object is destroyed. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231204151406.1977285-1-boris.brezillon@collabora.com
-
AngeloGioacchino Del Regno authored
To make sure that we don't unintentionally perform any unclocked and/or unpowered R/W operation on GPU registers, before turning off clocks and regulators we must make sure that no GPU, JOB or MMU ISR execution is pending: doing that requires to add a mechanism to synchronize the interrupts on suspend. Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform interrupts masking and ISR execution synchronization, and then call those in the panfrost_device_runtime_suspend() handler in the exact sequence of job (may require mmu!) -> mmu -> gpu. As a side note, JOB and MMU suspend_irq functions needed some special treatment: as their interrupt handlers will unmask interrupts, it was necessary to add an `is_suspended` bitmap which is used to address the possible corner case of unintentional IRQ unmasking because of ISR execution after a call to synchronize_irq(). At resume, clear each is_suspended bit in the reset path of JOB/MMU to allow unmasking the interrupts. Signed-off-by:AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for adding a IRQ synchronization mechanism for PM suspend, add gpu_irq and mmu_irq variables to struct panfrost_device and change functions panfrost_gpu_init() and panfrost_mmu_init() to use those. Reviewed-by:
-
AngeloGioacchino Del Regno authored
Some SoCs may be equipped with a GPU containing two core groups and this is exactly the case of Samsung's Exynos 5422 featuring an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost is partial, as this driver currently supports using only one core group and that's reflected on all parts of it, including the power on (and power off, previously to this patch) function. The issue with this is that even though executing the soft reset operation should power off all cores unconditionally, on at least one platform we're seeing a crash that seems to be happening due to an interrupt firing which may be because we are calling power transition only on the first core group, leaving the second one unchanged, or because ISR execution was pending before entering the panfrost_gpu_power_off() function and executed after powering off the GPU cores, or all of the above. Finally, solve this by: - Avoid to enable the power transition interrupt on reset; and - Ignoring the core_mask and ask the GPU to poweroff both core groups Fixes: 22aa1a20 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Reviewed-by:
-
Michael Walle authored
Timings taken from the datasheet, although sometimes there are just typical values and it's not clear if they are no min and max values or if you must use the typical value exactly. To make things worse, there is no back porch but only a combined sync and back porch length. Unfortunately, there is not public datasheet. Therefore, here are the relevant timings: | min | typ | max | -----------------+-----+--------+-----+ CLK frequency | - | 25.175 | - | HS period | - | 800 | - | HS pulse width | 5 | 30 | - | HS-DEN time | 112 | 144 | 175 | DEN pulse width | - | 640 | - | VS pulse width | 1 | 3 | 5 | VS-DEN time | - | 35 | - | VS period | - | 525 | - | Signed-off-by:Michael Walle <mwalle@kernel.org> Reviewed-by:
-
Michael Walle authored
Add Evervision VGG644804 5.7" 640x480 LVDS panel compatible string. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231123102404.2022201-1-mwalle@kernel.orgSigned-off-by:
-
Philipp Zabel authored
Add support for Ampire AM8001280G LCD panels. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Philipp Zabel authored
Document the compatible value for Ampire AM8001280G LCD panels. Signed-off-by:
-
Marco Felsch authored
The panel.prepare() call requires an initialized MIPI-DSI host, so set the prepare_prev_first flag to indicate that the host must be initialized first. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Chris Morgan authored
Add support for the Powkiddy X55 panel as used on the Powkiddy X55 handheld gaming console. This panel uses a Himax HX8394 display controller and requires a vendor provided init sequence. The display resolution is 720x1280 and is 67mm by 121mm as measured with calipers. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reviewed-by:
-
Chris Morgan authored
Add compatible string for the Powkiddy X55 panel. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231204185719.569021-6-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Add support for setting the rotation property for the Himax HX8394 panel. Signed-off-by:
-
Chris Morgan authored
Document panel rotation for Himax HX8394 display panel. Signed-off-by:
-
