MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and
BNEZLAC instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and
BEQZALC instructions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 added the following four instructions which share the
BGTZ and BGTZL opcode:

BLTZALC: Compact branch-and-link if GPR rt is < to zero
BGTZALC: Compact branch-and-link if GPR rt is > to zero
BLTZL  : Compact branch if GPR rt is < to zero
BGTZL  : Compact branch if GPR rt is > to zero
BLTC   : Compact branch if GPR rs is less than GPR rt
BLTUC  : Similar to BLTC but unsigned
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 added the following four instructions which share the
BLEZ and BLEZL opcodes:

BLEZALC: Compact branch-and-link if GPR rt is <= to zero
BGEZALC: Compact branch-and-link if GPR rt is >= to zero
BLEZC  : Compact branch if GPR rt is <= to zero
BGEZC  : Compact branch if GPR rt is >= to zero
BGEC   : Compact branch if GPR rs is less than or equal to GPR rt
BGEUC  : Similar to BGEC but unsigned.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 introduced the following two branch instructions for COP1:

BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero
BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL,
BGTZL branch likely instructions so we must not try to emulate them on
MIPS R6 if the R2-to-R6 emulator is not present.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The MIPS R6 JR instruction is an alias to the JALR one, so it may
need emulation for non-R6 userlands.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The secondary cache initialization and configuration code is processor
specific so we need to handle MIPS R6 cores as well.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The local_r4k_flush_cache_sigtramp function uses the 'cache'
instruction inside an asm block. However, MIPS R6 changed the
opcode for the cache instruction and as a result of which we
need to set the correct ISA level.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the
EHB instruction is available or not. This is necessary for MIPS R6
which also supports the EHB instruction.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The MIPS R6 pref instruction only has 9 bits for the immediate
field so skip the micro-assembler PREF instruction if the offset
does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is
no longer valid in MIPS R6, so we change the default for all MIPS R6
processors to bit 5 (Pref_StoreStreamed).
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 dropped the unaligned load and store instructions so
we need to re-write this part of the code for R6 to store
one byte at a time.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 does not support the unaligned load and store instructions
so we add a special MIPS R6 case to copy one byte at a time if we
need to read/write to unaligned memory addresses.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The load/store unaligned instructions have been removed in MIPS R6
so we need to re-implement the related macros using the regular
load/store instructions. Moreover, the load/store from coprocessor 2
instructions have been reallocated in Release 6 so we will handle them
in the emulator instead.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The "addi" instruction will trap on overflows which is not something
we need in this code, so we replace that with "addiu".

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The jr instruction opcode has changed in R6 so make sure
the correct ISA level is set prior using that instruction.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add the MIPS R6 related preprocessor definitions for FPU signal
related functions. MIPS R6 only has FR=1 so avoid checking that
bit on the C0/Status register.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add the MIPS R6 related preprocessor definitions for save/restore
FPU related functions. We also set the appropriate ISA level
so the final return instruction "jr ra" will produce the correct
opcode on R6.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add MIPS R6 support to cache and ftlb exceptions, as well as
to the hwrena and ebase register configuration.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Print 'mips64r6' and/or 'mips32r6' if the kernel is running on
a MIPS R6 core.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The instruction hazard barrier in the form of:

jr.hb	ra
nop

is valid on MIPS R6 as well.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add MIPS R6 support when decoding the config0 c0 register.
Also add MIPS R6 support when examining the ebase c0 register
to get the core number and when getting the shadow set number
from the srsctl c0 register.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Just like MIPS R2, in MIPS R6 it is possible to determine if a
timer interrupt has happened or not.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The current HW bugs checked in cpu-bugs64, do not apply to R6 cores
and they cause compilation problems due to removed <R6 instructions,
so do not check for them for the time being.
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

"sub $reg, imm" is not a real MIPS instruction. The assembler can
replace that with "addi $reg, -imm". However, addi has been removed
from R6, so we replace the "sub" instruction with the "addiu" one.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the appropriate ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to
set the correct ISA level.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the opcodes for LL/SC instructions so we need to set
the correct ISA.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

GCC versions supporting MIPS R6 use the ZC constraint to enforce a
9-bit offset for MIPS R6. We will use that for all MIPS R6 LL/SC
instructions.

Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

The GCC_OFF12_ASM macro is used for 12-bit immediate constrains
but we will also use it for 9-bit constrains on MIPS R6 so we
rename it to something more appropriate.

Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6, just like MIPS R2, have scratch pad storage, so add a new
symbol which is selected by MIPS R2 and R6.

Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00389.html
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

MIPS R6 changed the 'cache' instruction opcode and reduced the
offset field to 8 bits. This means we now have to adjust the
base register every 256 bytes and as a result of which we can
no longer use the previous cache functions.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>

Add the MIPS R6 related definitions to the IRQ related macros
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>