- 18 Nov, 2017 13 commits
-
-
Eric Dumazet authored
[ Upstream commit 864e2a1f ] When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Craig Gallek authored
[ Upstream commit 1b5f962e ] Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 509c7a1e ] syzkaller got crashes in packet_getsockopt() processing PACKET_ROLLOVER_STATS command while another thread was managing to change po->rollover Using RCU will fix this bug. We might later add proper RCU annotations for sparse sake. In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu() variant, as spotted by John. Fixes: a9b63918 ("packet: rollover statistics") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c92e8c02 ] syzkaller found another bug in DCCP/TCP stacks [1] For the reasons explained in commit ce105008 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access ireq->opt unless we own the request sock. Note the opt field is renamed to ireq_opt to ease grep games. [1] BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 Read of size 1 at addr ffff8801c951039c by task syz-executor5/3295 CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474 tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135 tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557 __tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072 tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline] tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071 tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816 tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x40c341 RSP: 002b:00007f469523ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 000000000040c341 RDX: 0000000000000037 RSI: 0000000020004000 RDI: 0000000000000015 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000f4240 R11: 0000000000000293 R12: 00000000004b7fd1 R13: 00000000ffffffff R14: 0000000020000000 R15: 0000000000025000 Allocated by task 3295: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 __do_kmalloc mm/slab.c:3725 [inline] __kmalloc+0x162/0x760 mm/slab.c:3734 kmalloc include/linux/slab.h:498 [inline] tcp_v4_save_options include/net/tcp.h:1962 [inline] tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271 tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283 tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313 tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857 tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482 tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3306: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157 __sk_destruct+0xfd/0x910 net/core/sock.c:1560 sk_destruct+0x47/0x80 net/core/sock.c:1595 __sk_free+0x57/0x230 net/core/sock.c:1603 sk_free+0x2a/0x40 net/core/sock.c:1614 sock_put include/net/sock.h:1652 [inline] inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959 tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765 tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:249 [inline] ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:464 [inline] ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:249 [inline] ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587 netif_receive_skb+0xae/0x390 net/core/dev.c:4611 tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372 tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766 tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792 call_write_iter include/linux/fs.h:1770 [inline] new_sync_write fs/read_write.c:468 [inline] __vfs_write+0x68a/0x970 fs/read_write.c:481 vfs_write+0x18f/0x510 fs/read_write.c:543 SYSC_write fs/read_write.c:588 [inline] SyS_write+0xef/0x220 fs/read_write.c:580 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
-
Xin Long authored
[ Upstream commit 1cc276ce ] Now sctp processes icmp redirect packet in sctp_icmp_redirect where it calls sctp_transport_dst_check in which tp->dst can be released. The problem is before calling sctp_transport_dst_check, it doesn't check sock_owned_by_user, which means tp->dst could be freed while a process is accessing it with owning the socket. An use-after-free issue could be triggered by this. This patch is to fix it by checking sock_owned_by_user before calling sctp_transport_dst_check in sctp_icmp_redirect, so that it would not release tp->dst if users still hold sock lock. Besides, the same issue fixed in commit 45caeaa5 ("dccp/tcp: fix routing redirect race") on sctp also needs this check. Fixes: 55be7a9c ("ipv4: Add redirect support to all protocol icmp error handlers") Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 0ad646c8 ] register_netdevice() could fail early when we have an invalid dev name, in which case ->ndo_uninit() is not called. For tun device, this is a problem because a timer etc. are already initialized and it expects ->ndo_uninit() to clean them up. We could move these initializations into a ->ndo_init() so that register_netdevice() knows better, however this is still complicated due to the logic in tun_detach(). Therefore, I choose to just call dev_get_valid_name() before register_netdevice(), which is quicker and much easier to audit. And for this specific case, it is already enough. Fixes: 96442e42 ("tuntap: choose the txq based on rxq") Reported-by:
Dmitry Alexeev <avekceeb@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 5903f594 ] When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(), the session may be unconnected. That is, it was created by pppol2tp_session_create() and hasn't been connected with pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check for this case in order to avoid dereferencing a NULL pointer. Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2b7cda9c ] Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a98 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by:
Roman Gushchin <guro@fb.com> Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c0576e39 ] If for some reason, the newly allocated child need to be freed, we will call cgroup_put() (via sk_free_unlock_clone()) while the corresponding cgroup_get() was not yet done, and we will free memory too soon. Fixes: d979a39d ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by:
-
Jason A. Donenfeld authored
[ Upstream commit 41c87425 ] It turns out that multiple places can call netlink_dump(), which means it's still possible to dereference partially initialized values in dump() that were the result of a faulty returned start(). This fixes the issue by calling start() _before_ setting cb_running to true, so that there's no chance at all of hitting the dump() function through any indirect paths. It also moves the call to start() to be when the mutex is held. This has the nice side effect of serializing invocations to start(), which is likely desirable anyway. It also prevents any possible other races that might come out of this logic. In testing this with several different pieces of tricky code to trigger these issues, this commit fixes all avenues that I'm aware of. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit e669b869 ] In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Craig Gallek authored
[ Upstream commit 93161922 ] Syzkaller found several variants of the lockup below by setting negative values with the TUNSETSNDBUF ioctl. This patch adds a sanity check to both the tun and tap versions of this ioctl. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [repro:2389] Modules linked in: irq event stamp: 329692056 hardirqs last enabled at (329692055): [<ffffffff824b8381>] _raw_spin_unlock_irqrestore+0x31/0x75 hardirqs last disabled at (329692056): [<ffffffff824b9e58>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (35659740): [<ffffffff824bc958>] __do_softirq+0x328/0x48c softirqs last disabled at (35659731): [<ffffffff811c796c>] irq_exit+0xbc/0xd0 CPU: 0 PID: 2389 Comm: repro Not tainted 4.14.0-rc7 #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880009452140 task.stack: ffff880006a20000 RIP: 0010:_raw_spin_lock_irqsave+0x11/0x80 RSP: 0018:ffff880006a27c50 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 RAX: ffff880009ac68d0 RBX: ffff880006a27ce0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff880006a27ce0 RDI: ffff880009ac6900 RBP: ffff880006a27c60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 000000000063ff00 R12: ffff880009ac6900 R13: ffff880006a27cf8 R14: 0000000000000001 R15: ffff880006a27cf8 FS: 00007f4be4838700(0000) GS:ffff88000cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020101000 CR3: 0000000009616000 CR4: 00000000000006f0 Call Trace: prepare_to_wait+0x26/0xc0 sock_alloc_send_pskb+0x14e/0x270 ? remove_wait_queue+0x60/0x60 tun_get_user+0x2cc/0x19d0 ? __tun_get+0x60/0x1b0 tun_chr_write_iter+0x57/0x86 __vfs_write+0x156/0x1e0 vfs_write+0xf7/0x230 SyS_write+0x57/0xd0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f4be4356df9 RSP: 002b:00007ffc18101c08 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4be4356df9 RDX: 0000000000000046 RSI: 0000000020101000 RDI: 0000000000000005 RBP: 00007ffc18101c40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000293 R12: 0000559c75f64780 R13: 00007ffc18101d30 R14: 0000000000000000 R15: 0000000000000000 Fixes: 33dccbb0 ("tun: Limit amount of queued packets per device") Fixes: 20d29d7a ("net: macvtap driver") Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 3d0241d5 ] When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
- 15 Nov, 2017 27 commits
-
-
Greg Kroah-Hartman authored
-
Borislav Petkov authored
commit a743bbee upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: x86@kernel.org Signed-off-by:
-
Pavel Tatashin authored
commit 76ce7cfe upstream. If the TSC has constant frequency then the delay calibration can be skipped when it has been calibrated for a package already. This is checked in calibrate_delay_is_known(), but that function is buggy in two aspects: It returns 'false' if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC) which is obviously the reverse of the intended check and the check for the sibling mask cannot work either because the topology links have not been set up yet. Correct the condition and move the call to set_cpu_sibling_map() before invoking calibrate_delay() so the sibling check works correctly. [ tglx: Rewrote changelong ] Fixes: c25323c0 ("x86/tsc: Use topology functions") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by:
-
Richard Schütz authored
commit fb5f0b3e upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by:
Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Marek Vasut authored
commit 4f711675 upstream. The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Signed-off-by:
-
Gerhard Bertelsmann authored
commit 4dcf924c upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by:
Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by:
-
John Stultz authored
commit 3587c856 upstream. I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey. Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down. Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.orgSigned-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
John Stultz authored
commit 4226d9b1 upstream. Thus this patch changes the EDID probing logic so that we re-use the __adv7511_power_on/off() calls instead of duplciating logic. This does change behavior slightly as it adds the HPD signal pulse to the EDID probe path, but Archit has had a patch to add HPD signal pulse to the EDID probe path before, so this should address the cases where that helped. Another difference is that regcache_mark_dirty() is also called in the power off path once EDID is probed. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
John Stultz authored
commit 651e4769 upstream. In chasing down issues with EDID probing, I found some duplicated but incomplete logic used to power the chip on and off. This patch refactors the adv7511_power_on/off functions, so they can be used for internal needs. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Sinclair Yeh authored
commit cef75036 upstream. This is an extension of Commit 7c20d213 ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Ilya Dryomov authored
commit 1e37f2f8 upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Kai-Heng Feng authored
commit cdea6a30 upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Oswald Buddenhagen authored
commit b084116f upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d5 ("MIPS: AR7: Use correct UART port type") Signed-off-by:
Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Jonas Gorski authored
commit e6b03ab6 upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e ("gpio: remove gpio_descs global array") Signed-off-by:
-
Jaedon Shin authored
commit ea4b3afe upstream. Fix NULL pointer access in BMIPS3300 RAC flush. Fixes: 738a3f79 ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by:
-
Marcus Cooper authored
commit 96e53c41 upstream. The dapm components are now handled by the ALSA SoC SPDIF DIT driver so can be removed. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Luis R. Rodriguez authored
commit afb999cd upstream. Some distributions (Debian, OpenSUSE) have a udev rule in place to cancel all fallback mechanism uevents immediately. This would obviously make it hard to test against the fallback mechanism test interface, so we need to check for this. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Luis R. Rodriguez authored
commit 880444e2 upstream. Error that we expect should not be spilled to stdout. Without this we get: ./fw_filesystem.sh: line 58: printf: write error: Invalid argument ./fw_filesystem.sh: line 63: printf: write error: No such device ./fw_filesystem.sh: line 69: echo: write error: No such file or directory ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works With it: ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works Signed-off-by:
-
Matt Redfearn authored
commit 9e8c399a upstream. Commit 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") effectively reverted commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online") and thus has reinstated the possibility of deadlock. The commit was based on testing of kernel v4.4, where the CPU hotplug core code issued a BUG() if the starting CPU is not marked online when the boot CPU returns from __cpu_up. The commit fixes this race (in v4.4), but re-introduces the deadlock situation. As noted in the commit message, upstream differs in this area. Commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up") adds a completion event in the CPU hotplug core code, making this race impossible. However, people were unhappy with relying on the core code to do the right thing. To address the issues both commits were trying to fix, add a second completion event in the MIPS smp hotplug path. It removes the possibility of a race, since the MIPS smp hotplug code now synchronises both the boot and secondary CPUs before they return to the hotplug core code. It also addresses the deadlock by ensuring that the secondary CPU is not marked online before it's counters are synchronised. This fix should also be backported to fix the race condition introduced by the backport of commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online"), through really that race only existed before commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up"). Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Fixes: 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/17376/Signed-off-by:
-
Matija Glavinic Pecotic authored
commit 6f542ebe upstream. While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was observed that occasionally check for cpu online will fail in kernel/cpu.c, _cpu_up: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485 518 /* Arch-specific enabling code. */ 519 ret = __cpu_up(cpu, idle); 520 521 if (ret != 0) 522 goto out_notify; 523 BUG_ON(!cpu_online(cpu)); Reason is race between start_secondary and _cpu_up. cpu_callin_map is set before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu online mask is not, resulting in race in which secondary processor started and set cpu_callin_map, but not yet set the online mask,resulting in above BUG being hit. Upstream differs in the area. cpu_online check is in bringup_wait_for_ap, which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start function. Nonetheless, fix makes start_secondary safe and not depending on other locks throughout the code. It protects as well against cpu_online checks put in between sometimes in the future. Fix this by moving completion after all flags are set. Signed-off-by:
Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16925/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Matt Redfearn authored
commit a00eeede upstream. If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by:
-
Paul Burton authored
commit 6a6cba1d upstream. The default CM target field in the GCR_BASE register is encoded with 0 meaning memory & 1 being reserved. However the definitions we use for those bits effectively get these two values backwards - likely because they were copied from the definitions for the CM regions where the target is encoded differently. This results in use setting up GCR_BASE with the reserved target value by default, rather than targeting memory as intended. Although we currently seem to get away with this it's not a great idea to rely upon. Fix this by changing our macros to match the documentated target values. The incorrect encoding became used as of commit 9f98f3dd ("MIPS: Add generic CM probe & access code") in the Linux v3.15 cycle, and was likely carried forwards from older but unused code introduced by commit 39b8d525 ("[MIPS] Add support for MIPS CMP platform.") in the v2.6.26 cycle. Fixes: 9f98f3dd ("MIPS: Add generic CM probe & access code") Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
-
Gustavo A. R. Silva authored
commit 77238e76 upstream. It seems that this is a typo error and the proper bit masking is "RT | RS" instead of "RS | RS". This issue was detected with the help of Coccinelle. Fixes: d6b3314b ("MIPS: uasm: Add lh uam instruction") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
-
Maarten Lankhorst authored
commit 8777b927 upstream. The original intent was to preserve watermarks as much as possible in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm. It seems this approach is insufficient and we don't always preserve the raw watermarks, so just use the atomic iterator we're already using to get a const pointer to all bound planes on the crtc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 28283f4f) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 3510c7aa upstream. The recent fix for adding rwsem nesting annotation was using the given "hop" argument as the lock subclass key. Although the idea itself works, it may trigger a kernel warning like: BUG: looking up invalid subclass: 8 .... since the lockdep has a smaller number of subclasses (8) than we currently allow for the hops there (10). The current definition is merely a sanity check for avoiding the too deep delivery paths, and the 8 hops are already enough. So, as a quick fix, just follow the max hops as same as the max lockdep subclasses. Fixes: 1f20f9ff ("ALSA: seq: Fix nested rwsem annotation for lockdep splat") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 132d358b upstream. The SYSEX event delivery in OSS sequencer emulation assumed that the event is encoded in the variable-length data with the straight buffering. This was the normal behavior in the past, but during the development, the chained buffers were introduced for carrying more data, while the OSS code was left intact. As a result, when a SYSEX event with the chained buffer data is passed to OSS sequencer port, it may end up with the wrong memory access, as if it were having a too large buffer. This patch addresses the bug, by applying the buffer data expansion by the generic snd_seq_dump_var_event() helper function. Reported-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
Mark Rutland authored
commit b9dd05c7 upstream. When CONFIG_DEBUG_USER is enabled, it's possible for a user to deliberately trigger dump_instr() with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. So that we can use the same code to dump user instructions and kernel instructions, the common dumping code is factored out to __dump_instr(), with the fs manipulated appropriately in dump_instr() around calls to this. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
