- 24 Jul, 2020 10 commits
-
-
Phillip Lougher authored
This is a regression introduced by the "migrate from ll_rw_block usage to BIO" patch. Squashfs packs structures on byte boundaries, and due to that the length field (of the metadata block) may not be fully in the current block. The new code rewrote and introduced a faulty check for that edge case. Fixes: 93e72b3c ("squashfs: migrate from ll_rw_block usage to BIO") Reported-by:
Bernd Amend <bernd.amend@gmail.com> Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Guenter Roeck <groeck@chromium.org> Cc: Daniel Rosenberg <drosen@google.com> Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.ukSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Add an entry to correct my email addresses. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
Kirill A. Shutemov authored
khugepaged has to drop mmap lock several times while collapsing a page. The situation can change while the lock is dropped and we need to re-validate that the VMA is still in place and the PMD is still subject for collapse. But we miss one corner case: while collapsing an anonymous pages the VMA could be replaced with file VMA. If the file VMA doesn't have any private pages we get NULL pointer dereference: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] anon_vma_lock_write include/linux/rmap.h:120 [inline] collapse_huge_page mm/khugepaged.c:1110 [inline] khugepaged_scan_pmd mm/khugepaged.c:1349 [inline] khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline] khugepaged_do_scan mm/khugepaged.c:2193 [inline] khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238 The fix is to make sure that the VMA is anonymous in hugepage_vma_revalidate(). The helper is only used for collapsing anonymous pages. Fixes: 99cb0dbd ("mm,thp: add read-only THP support for (non-shmem) FS") Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.comSigned-off-by:
-
Barry Song authored
hugetlb_cma[0] can be NULL due to various reasons, for example, node0 has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is not enabled. gigantic pages might have been reserved on other nodes. This patch fixes possible double reservation and CMA leak. [akpm@linux-foundation.org: fix CONFIG_CMA=n warning] [sfr@canb.auug.org.au: better checks before using hugetlb_cma] Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by:
Barry Song <song.bao.hua@hisilicon.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.comSigned-off-by:
-
Muchun Song authored
If the kmem_cache refcount is greater than one, we should not mark the root kmem_cache as dying. If we mark the root kmem_cache dying incorrectly, the non-root kmem_cache can never be destroyed. It resulted in memory leak when memcg was destroyed. We can use the following steps to reproduce. 1) Use kmem_cache_create() to create a new kmem_cache named A. 2) Coincidentally, the kmem_cache A is an alias for kmem_cache B, so the refcount of B is just increased. 3) Use kmem_cache_destroy() to destroy the kmem_cache A, just decrease the B's refcount but mark the B as dying. 4) Create a new memory cgroup and alloc memory from the kmem_cache B. It leads to create a non-root kmem_cache for allocating memory. 5) When destroy the memory cgroup created in the step 4), the non-root kmem_cache can never be destroyed. If we repeat steps 4) and 5), this will cause a lot of memory leak. So only when refcount reach zero, we mark the root kmem_cache as dying. Fixes: 92ee383f ("mm: fix race between kmem_cache destroy, create and deactivate") Signed-off-by:Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
-
Hugh Dickins authored
It was hard to keep a test running, moving tasks between memcgs with move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s refcount is discovered to be 0 (supposedly impossible), so it is then forced to REFCOUNT_SATURATED, and after thousands of warnings in quick succession, the test is at last put out of misery by being OOM killed. This is because of the way moved_swap accounting was saved up until the task move gets completed in __mem_cgroup_clear_mc(), deferred from when mem_cgroup_move_swap_account() actually exchanged old and new ids. Concurrent activity can free up swap quicker than the task is scanned, bringing id refcount down 0 (which should only be possible when offlining). Just skip that optimization: do that part of the accounting immediately. Fixes: 615d66c3 ("mm: memcontrol: fix memcg id ref counter on swap charge move") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvilsSigned-off-by:
-
Bhupesh Sharma authored
Prabhakar reported an OOPS inside mem_cgroup_get_nr_swap_pages() function in a corner case seen on some arm64 boards when kdump kernel runs with "cgroup_disable=memory" passed to the kdump kernel via bootargs. The root-cause behind the same is that currently mem_cgroup_swap_init() function is implemented as a subsys_initcall() call instead of a core_initcall(), this means 'cgroup_memory_noswap' still remains set to the default value (false) even when memcg is disabled via "cgroup_disable=memory" boot parameter. This may result in premature OOPS inside mem_cgroup_get_nr_swap_pages() function in corner cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 [0000000000000188] user address but active_mm is swapper Internal error: Oops: 96000006 [#1] SMP Modules linked in: <..snip..> Call trace: mem_cgroup_get_nr_swap_pages+0x9c/0xf4 shrink_lruvec+0x404/0x4f8 shrink_node+0x1a8/0x688 do_try_to_free_pages+0xe8/0x448 try_to_free_pages+0x110/0x230 __alloc_pages_slowpath.constprop.106+0x2b8/0xb48 __alloc_pages_nodemask+0x2ac/0x2f8 alloc_page_interleave+0x20/0x90 alloc_pages_current+0xdc/0xf8 atomic_pool_expand+0x60/0x210 __dma_atomic_pool_init+0x50/0xa4 dma_atomic_pool_init+0xac/0x158 do_one_initcall+0x50/0x218 kernel_init_freeable+0x22c/0x2d0 kernel_init+0x18/0x110 ret_from_fork+0x10/0x18 Code: aa1403e3 91106000 97f82a27 14000011 (f940c663) ---[ end trace 9795948475817de4 ]--- Kernel panic - not syncing: Fatal exception Rebooting in 10 seconds.. Fixes: eccb52e7 ("mm: memcontrol: prepare swap controller setup for integration") Reported-by:Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1593641660-13254-2-git-send-email-bhsharma@redhat.comSigned-off-by:
-
Tom Rix authored
clang static analysis reports a garbage return In file included from mm/memory.c:84: mm/memory.c:1612:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return err; ^~~~~~~~~~ The setting of err depends on a loop executing. So initialize err. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Chengguang Xu authored
After commit fdc85222 ("kernfs: kvmalloc xattr value instead of kmalloc"), simple xattr entry is allocated with kvmalloc() instead of kmalloc(), so we should release it with kvfree() instead of kfree(). Fixes: fdc85222 ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Daniel Xu <dxu@dxuuu.xyz> Cc: Chris Down <chris@chrisdown.name> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.netSigned-off-by:
-
Kirill A. Shutemov authored
VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under mmap_read_lock(). It can lead to race with __do_munmap(): Thread A Thread B __do_munmap() detach_vmas_to_be_unmapped() mmap_write_downgrade() expand_downwards() vma->vm_start = address; // The VMA now overlaps with // VMAs detached by the Thread A // page fault populates expanded part // of the VMA unmap_region() // Zaps pagetables partly // populated by Thread B Similar race exists for expand_upwards(). The fix is to avoid downgrading mmap_lock in __do_munmap() if detached VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA. [akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment] Fixes: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by:Jann Horn <jannh@google.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.20+] Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.comSigned-off-by:
-
- 23 Jul, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH to reflect reality and avoid further confusion. This is a user space visible change therefore the commit has also a stable tag for 5.7, where this counter was introduced. - Add Matthew Rosato as s390 IOMMU maintainer. * tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: add Matthew for s390 IOMMU s390/cpum_cf,perf: change DFLT_CCERROR counter name
-
- 22 Jul, 2020 3 commits
-
-
Linus Torvalds authored
Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the upcoming atomisp driver. They solve issues when probing atomisp on devices with multiple cameras and get rid of warnings when built with W=1. The diffstat is a bit long, as this driver has several abstractions. The patches that solved the issues with W=1 had to get rid of some duplicated code (there used to have 2 versions of the same code, one for ISP2401 and another one for ISP2400). As this driver is not in 5.7, such changes won't cause regressions" * tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits) Revert "media: atomisp: keep the ISP powered on when setting it" media: atomisp: fix mask and shift operation on ISPSSPM0 media: atomisp: move system_local consts into a C file media: atomisp: get rid of version-specific system_local.h media: atomisp: move global stuff into a common header media: atomisp: remove non-used 32-bits consts at system_local media: atomisp: get rid of some unused static vars media: atomisp: Fix error code in ov5693_probe() media: atomisp: Replace trace_printk by pr_info media: atomisp: Fix __func__ style warnings media: atomisp: fix help message for ISP2401 selection media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue. media: atomisp: make const arrays static, makes object smaller media: atomisp: Clean up non-existing folders from Makefile media: atomisp: Get rid of ACPI specifics in gmin_subdev_add() media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() media: atomisp: Use temporary variable for device in gmin_subdev_add() media: atomisp: Refactor PMIC detection to a separate function media: atomisp: Deduplicate return ret in gmin_i2c_write() media: atomisp: Make pointer to PMIC client global ...
-
Linus Torvalds authored
Merge tag 'exfat-for-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat into master Pull exfat fixes from Namjae Jeon: - fix overflow issue at sector calculation - fix wrong hint_stat initialization - fix wrong size update of stream entry - fix endianness of upname in name_hash computation * tag 'exfat-for-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix name_hash computation on big endian systems exfat: fix wrong size update of stream entry by typo exfat: fix wrong hint_stat initialization in exfat_find_dir_entry() exfat: fix overflow issue in exfat_cluster_to_sector()
-
Gerald Schaefer authored
Acked-By:
Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
- 21 Jul, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This became fairly large, containing mostly the collection of ASoC fixes that slipped from the previous request, so I sent now a bit earlier than usual. But all changes look small and mostly device-specific, hence nothing to worry too much. Majority of changes are for x86 based platforms and their CODEC drivers, in order to address some issues hit by their recent tests and fuzzing. The rest are other ASoC device-specific fixes (imx, qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING hit by syzkaller" * tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S ALSA: info: Drop WARN_ON() from buffer NULL sanity check ASoC: rt5682: Report the button event in the headset type only ASoC: Intel: bytcht_es8316: Add missed put_device() ASoC: rt5682: Enable Vref2 under using PLL2 ASoC: rt286: fix unexpected interrupt happens ASoC: wm8974: remove unsupported clock mode ASoC: wm8974: fix Boost Mixer Aux Switch ASoC: SOF: core: fix null-ptr-deref bug during device removal ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: fix kernel oops on route addition error ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M ASoC: Intel: bdw-rt5677: fix non BE conversion ASoC: soc-dai: set dai_link dpcm_ flags with a helper MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl ASoC: core: Remove only the registered component in devm functions MAINTAINERS: Change Maintainer for some at91 drivers ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings ...
-
Thomas Richter authored
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by:
-
Ilya Ponetayev authored
On-disk format for name_hash field is LE, so it must be explicitly transformed on BE system for proper result. Fixes: 370e812b ("exfat: add nls operations") Cc: stable@vger.kernel.org # v5.7 Signed-off-by:
Chen Minqiang <ptpt52@gmail.com> Signed-off-by:
Ilya Ponetayev <i.ponetaev@ndmsystems.com> Reviewed-by:
Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com>
-
Hyeongseok Kim authored
The stream.size field is updated to the value of create timestamp of the file entry. Fix this to use correct stream entry pointer. Fixes: 29bbb14b ("exfat: fix incorrect update of stream entry in __exfat_truncate()") Signed-off-by:
Hyeongseok Kim <hyeongseok@gmail.com> Signed-off-by:
-
Namjae Jeon authored
We found the wrong hint_stat initialization in exfat_find_dir_entry(). It should be initialized when cluster is EXFAT_EOF_CLUSTER. Fixes: ca061973 ("exfat: add directory operations") Cc: stable@vger.kernel.org # v5.7 Reviewed-by:
-
Namjae Jeon authored
An overflow issue can occur while calculating sector in exfat_cluster_to_sector(). It needs to cast clus's type to sector_t before left shifting. Fixes: 1acf1a56 ("exfat: add in-memory and on-disk structures and headers") Cc: stable@vger.kernel.org # v5.7 Reviewed-by:
-
- 20 Jul, 2020 2 commits
-
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fix from Alex Williamson: "Fix race with eventfd ctx cleared outside of mutex (Zeng Tao)" * tag 'vfio-v5.8-rc7' of git://github.com/awilliam/linux-vfio: vfio/pci: fix racy on error and request eventfd ctx
-
Kevin Buettner authored
This fixes a regression encountered while running the gdb.base/corefile.exp test in GDB's test suite. In my testing, the typo prevented the sw_reserved field of struct fxregs_state from being output to the kernel XSAVES area. Thus the correct mask corresponding to XCR0 was not present in the core file for GDB to interrogate, resulting in the following behavior: [kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core Reading symbols from testsuite/outputs/gdb.base/corefile/corefile... [New LWP 232880] warning: Unexpected size of section `.reg-xstate/232880' in core file. With the typo fixed, the test works again as expected. Signed-off-by:
Kevin Buettner <kevinb@redhat.com> Fixes: 9e463654 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
- 19 Jul, 2020 18 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI. - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes 'perf record --switch-output-event event-name' usage" * tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools arch kvm: Sync kvm headers with the kernel sources perf tools: Sync hashmap.h with libbpf's libsubcmd: Fix OPT_CALLBACK_SET()
-
Linus Torvalds authored
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Thomas Gleixner: "A pile of fixes for x86: - Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to get out of sync. - Use the proper vectors for HYPERV. - Make disabling of stack protector for the entry code work with GCC builds which enable stack protector by default. Removing the option is not sufficient, it needs an explicit -fno-stack-protector to shut it off. - Mark check_user_regs() noinstr as it is called from noinstr code. The missing annotation causes it to be placed in the text section which makes it instrumentable. - Add the missing interrupt disable in exc_alignment_check() - Fixup a XEN_PV build dependency in the 32bit entry code - A few fixes to make the Clang integrated assembler happy - Move EFI stub build to the right place for out of tree builds - Make prepare_exit_to_usermode() static. It's not longer called from ASM code" * tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Don't add the EFI stub to targets x86/entry: Actually disable stack protector x86/ioperm: Fix io bitmap invalidation on Xen PV x86: math-emu: Fix up 'cmp' insn for clang ias x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV x86/entry: Add compatibility with IAS x86/entry/common: Make prepare_exit_to_usermode() static x86/entry: Mark check_user_regs() noinstr x86/traps: Disable interrupts in exc_aligment_check() x86/entry/32: Fix XEN_PV build dependency
-
Linus Torvalds authored
Merge tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fixes from Thomas Gleixner: "Two fixes for the timer wheel: - A timer which is already expired at enqueue time can set the base->next_expiry value backwards. As a consequence base->clk can be set back as well. This can lead to timers expiring early. Add a sanity check to prevent this. - When a timer is queued with an expiry time beyond the wheel capacity then it should be queued in the bucket of the last wheel level which is expiring last. The code adjusted the expiry time to the maximum wheel capacity, which is only correct when the wheel clock is 0. Aside of that the check whether the delta is larger than wheel capacity does not check the delta, it checks the expiry value itself. As a result timers can expire at random. Fix this by checking the right variable and adjust expiry time so it becomes base->clock plus capacity which places it into the outmost bucket in the last wheel level" * tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Fix wheel index calculation on last level timer: Prevent base->clk from moving backward
-
Linus Torvalds authored
Merge tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull scheduler fixes from Thomas Gleixner: "A set of scheduler fixes: - Plug a load average accounting race which was introduced with a recent optimization casing load average to show bogus numbers. - Fix the rseq CPU id initialization for new tasks. sched_fork() does not update the rseq CPU id so the id is the stale id of the parent task, which can cause user space data corruption. - Handle a 0 return value of task_h_load() correctly in the load balancer, which does not decrease imbalance and therefore pulls until the maximum number of loops is reached, which might be all tasks just created by a fork bomb" * tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: handle case of task_h_load() returning 0 sched: Fix unreliable rseq cpu_id for new tasks sched: Fix loadavg accounting race
-
Linus Torvalds authored
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull irq fixes from Thomas Gleixner: "Two fixes for the interrupt subsystem: - Make the handling of the firmware node consistent and do not free the node after the domain has been created successfully. The core code stores a pointer to it which can lead to a use after free or double free. This used to "work" because the pointer was not stored when the initial code was written, but at some point later it was required to store it. Of course nobody noticed that the existing users break that way. - Handle affinity setting on inactive interrupts correctly when hierarchical irq domains are enabled. When interrupts are inactive with the modern hierarchical irqdomain design, the interrupt chips are not necessarily in a state where affinity changes can be handled. The legacy irq chip design allowed this because interrupts are immediately fully initialized at allocation time. X86 has a hacky workaround for this, but other implementations do not. This cased malfunction on GIC-V3. Instead of playing whack a mole to find all affected drivers, change the core code to store the requested affinity setting and then establish it when the interrupt is allocated, which makes the X86 hack go away" * tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Handle affinity setting on inactive interrupts correctly irqdomain/treewide: Keep firmware node unconditionally allocated
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6. Nothing huge in here, just the normal collection of gadget, dwc2/3, serial, and other minor USB driver fixes and id additions. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: iuu_phoenix: fix memory corruption USB: c67x00: fix use after free in c67x00_giveback_urb usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant usb: chipidea: core: add wakeup support for extcon USB: serial: option: add Quectel EG95 LTE modem thunderbolt: Fix path indices used in USB3 tunnel discovery USB: serial: ch341: add new Product ID for CH340 USB: serial: option: add GosunCn GM500 series USB: serial: cypress_m8: enable Simply Automated UPB PIM
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Ensure we always have fully addressable memory in the dma coherent pool (Nicolas Saenz Julienne)" * tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: do not allocate pool memory from CMA dma-pool: make sure atomic pool suits device dma-pool: introduce dma_guess_pool() dma-pool: get rid of dma_in_atomic_pool() dma-direct: provide function to check physical memory area validity
-
Mauro Carvalho Chehab authored
changeset d0213061a501 ("media: atomisp: fix mask and shift operation on ISPSSPM0") solved the existing issue with the IUNIT power on code. So, the driver can now use the right code again. This reverts commit 95d1f398. Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Colin Ian King authored
Currently the check on bits 25:24 on ISPSSPM0 is always 0 because the mask and shift operations are incorrect. Fix this by shifting by MRFLD_ISPSSPM0_ISPSSS_OFFSET (24 bits right) and then masking with RFLD_ISPSSPM0_ISPSSC_MASK (0x03) to get the appropriate 2 bits to check. Addresses-Coverity: ("Operands don't affect result") Fixes: 0f441fd7 ("media: atomisp: simplify the power down/up code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Arvind Sankar authored
vmlinux-objs-y is added to targets, which currently means that the EFI stub gets added to the targets as well. It shouldn't be added since it is built elsewhere. This confuses Makefile.build which interprets the EFI stub as a target $(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a and will create drivers/firmware/efi/libstub/ underneath arch/x86/boot/compressed, to hold this supposed target, if building out-of-tree. [0] Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y. [0] See scripts/Makefile.build near the end: # Create directories for object files if they do not exist Signed-off-by:Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
-
Kees Cook authored
Some builds of GCC enable stack protector by default. Simply removing the arguments is not sufficient to disable stack protector, as the stack protector for those GCC builds must be explicitly disabled. Remove the argument removals and add -fno-stack-protector. Additionally include missed x32 argument updates, and adjust whitespace for readability. Fixes: 20355e5f ("x86/entry: Exclude low level entry code from sanitizing") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of declaring all those consts everywhere when the headers are included, just place them on a single place. This change shuts up lots of warnings when built with W=1: In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_compat_css20.h:24, from drivers/staging/media/atomisp/pci/atomisp_compat.h:22, from drivers/staging/media/atomisp/pci/atomisp_drvfs.c:23: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from drivers/staging/media/atomisp/pci/ia_css_acc_types.h:23, from drivers/staging/media/atomisp/pci/ia_css.h:26, from drivers/staging/media/atomisp/pci/atomisp_file.c:27: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_cmd.h:30, from drivers/staging/media/atomisp/pci/atomisp_csi2.c:21: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ In file included from ./drivers/staging/media/atomisp//pci/ia_css_acc_types.h:23, from ./drivers/staging/media/atomisp//pci/ia_css_pipe_public.h:29, from drivers/staging/media/atomisp/pci/sh_css_legacy.h:23, from drivers/staging/media/atomisp/pci/atomisp_internal.h:34, from drivers/staging/media/atomisp/pci/atomisp_acc.h:23, from drivers/staging/media/atomisp/pci/atomisp_acc.c:29: ./drivers/staging/media/atomisp//pci/system_local.h:193:26: warning: ‘STREAM2MMIO_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 193 | static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { | ^~~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:186:26: warning: ‘PIXELGEN_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { | ^~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:179:26: warning: ‘CSI_RX_BE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:172:26: warning: ‘CSI_RX_FE_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { | ^~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:165:26: warning: ‘ISYS_IRQ_BASE’ defined but not used [-Wunused-const-variable=] 165 | static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:158:26: warning: ‘IBUF_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:153:26: warning: ‘RX_BASE’ defined but not used [-Wunused-const-variable=] 153 | static const hrt_address RX_BASE[N_RX_ID] = { | ^~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:138:26: warning: ‘INPUT_SYSTEM_BASE’ defined but not used [-Wunused-const-variable=] 138 | static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:130:26: warning: ‘INPUT_FORMATTER_BASE’ defined but not used [-Wunused-const-variable=] 130 | static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { | ^~~~~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:125:26: warning: ‘TIMED_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 125 | static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { | ^~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:120:26: warning: ‘GPIO_BASE’ defined but not used [-Wunused-const-variable=] 120 | static const hrt_address GPIO_BASE[N_GPIO_ID] = { | ^~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:116:26: warning: ‘GP_TIMER_BASE’ defined but not used [-Wunused-const-variable=] 116 | static const hrt_address GP_TIMER_BASE = | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:109:26: warning: ‘GP_DEVICE_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:96:26: warning: ‘FIFO_MONITOR_BASE’ defined but not used [-Wunused-const-variable=] 96 | static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:90:26: warning: ‘GDC_BASE’ defined but not used [-Wunused-const-variable=] 90 | static const hrt_address GDC_BASE[N_GDC_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:78:26: warning: ‘IRQ_BASE’ defined but not used [-Wunused-const-variable=] 78 | static const hrt_address IRQ_BASE[N_IRQ_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:73:26: warning: ‘ISYS2401_DMA_BASE’ defined but not used [-Wunused-const-variable=] 73 | static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { | ^~~~~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:69:26: warning: ‘DMA_BASE’ defined but not used [-Wunused-const-variable=] 69 | static const hrt_address DMA_BASE[N_DMA_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:63:26: warning: ‘MMU_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const hrt_address MMU_BASE[N_MMU_ID] = { | ^~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:54:26: warning: ‘SP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 54 | static const hrt_address SP_DMEM_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:50:26: warning: ‘SP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 50 | static const hrt_address SP_CTRL_BASE[N_SP_ID] = { | ^~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:45:26: warning: ‘ISP_BAMEM_BASE’ defined but not used [-Wunused-const-variable=] 45 | static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { | ^~~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:41:26: warning: ‘ISP_DMEM_BASE’ defined but not used [-Wunused-const-variable=] 41 | static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ ./drivers/staging/media/atomisp//pci/system_local.h:37:26: warning: ‘ISP_CTRL_BASE’ defined but not used [-Wunused-const-variable=] 37 | static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { | ^~~~~~~~~~~~~ Signed-off-by: -
Mauro Carvalho Chehab authored
After removing the unused 32-bits data, the isp2401_system_local.h now contains everything that it is needed, either by isp2401 or by isp2400. So, remove code duplication. Signed-off-by: -
Mauro Carvalho Chehab authored
Right now, there are two versions of system_global.h headers. Both share a lot of common code. There are some ISP2401 specific types on one of the headers, but it doesn't conflict with the ISP2400 ones. Also, the common code is identical. So, remove code duplication by moving such code into a common header. Signed-off-by: -
Mauro Carvalho Chehab authored
There is an abstraction at the code in order to support 32 or 64 bits address/data length. However, for all Atom chipsets supported by this version, the size is fixed. So, cleanup the mess, removing the uused code and placing the data sizes on a single place. The end goal is to completely remove those local/global headers, replacing them by some ISP-version dependent struct, in order for the driver to decide what version it would need in runtime. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several static vars declared inside the system local headers. This causes lots of warnings when W=1. Remove the unused ones. Signed-off-by: -
Dan Carpenter authored
If gmin_camera_platform_data() returns NULL then we should return a negative error instead of success. Fixes: 90ebe55a ("media: staging: atomisp: Add driver prefix to Kconfig option and module names") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
