- 26 Jan, 2017 17 commits
-
-
Florian Fainelli authored
In preparation for allowing platform data, and therefore no valid device_node pointer, make most DSA functions takes a pointer to a dsa_port structure whenever possible. While at it, introduce a dsa_port_is_valid() helper function which checks whether port->dn is NULL or not at the moment. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by:
-
Satanand Burla authored
Accessing skb after submitting to input queue can cause access to stale pointers if the skb ends up being transmitted and freed by that time. Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - ignore self-generated loop detect MAC addresses in translation table, by Simon Wunderlich - install uapi batman_adv.h header, by Sven Eckelmann - bump copyright years, by Sven Eckelmann - Remove an unused variable in translation table code, by Sven Eckelmann - Handle NET_XMIT_CN like NET_XMIT_SUCCESS (revised according to Davids suggestion), and a follow up code clean up, by Gao Feng (2 patches) ==================== Signed-off-by: -
Arnd Bergmann authored
I noticed that this function uses a lot of kernel stack when the "latent entropy" plugin is enabled: drivers/isdn/hardware/eicon/message.c: In function 'sig_ind': drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] We currently don't warn about this, as we raise the warning limit to 2048 bytes in mainline, but I'd like to lower that limit again in the future, and this function can easily be changed to be more efficient and avoid that warning, by making some of its local variables 'const'. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gao Feng authored
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packet is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So batman-adv should handle NET_XMIT_CN also as NET_XMIT_SUCCESS. Signed-off-by:
Gao Feng <gfree.wind@gmail.com> [sven@narfation.org: Moved NET_XMIT_CN handling to batadv_send_skb_packet] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Gao Feng authored
It could decrease one condition check to collect some statements in the first condition block. Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
09748a22 ("batman-adv: add generic netlink family for batman-adv") introduced the new batman_adv.h which describes the netlink attributes and commands of batman-adv. But the Kbuild entry to install the header was not added. All currently known tools ship their own copy of batman_adv.h but it should be installed anyway to later be able to migrate to the system batman_adv.h. Signed-off-by:
-
Simon Wunderlich authored
The bridge loop avoidance (BLA) feature of batman-adv sends packets to probe for Mesh/LAN packet loops. Those packets are not sent by real clients and should therefore not be added to the translation table (TT). Signed-off-by:Simon Wunderlich <simon.wunderlich@open-mesh.com>
-
Arnd Bergmann authored
The only caller of this new function is inside of an #ifdef checking for CONFIG_BRIDGE_IGMP_SNOOPING, so we should move the implementation there too, in order to avoid this harmless warning: net/bridge/br_forward.c:177:13: error: 'maybe_deliver_addr' defined but not used [-Werror=unused-function] Fixes: 6db6f0ea ("bridge: multicast to unicast") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Daniel Borkmann authored
We currently used len instead of prefix_len for the strncmp() in fdinfo on the prog_tag. It still worked as we matched on the correct output line also with first 8 instead of 10 chars, but lets fix it properly to use the intended length. Fixes: 62b64660 ("bpf: add prog tag test case to bpf selftests") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
David S. Miller authored
Rafał Miłecki says: ==================== net-next: Broadcom PHY driver cleanup I will probably need to use broadcom.ko for PHY connected to interface of bgmac supported device so I started looking at it willing to understand it better. I found AUXCTL part of the driver / lib a bit confusing and hard to read so I'm trying to clean it up a bit. I hope this patchset makes following AUXCTL operations much easier making it clear which defines are for registers and which for values. There is no functional change in this pachset. ==================== Signed-off-by: -
Rafał Miłecki authored
1) Use 0x%02x format for register number. This follows some other defines and makes it easier to distinct register from values. 2) Put register define above values and sort the values. It makes reading header code easier. 3) Use 0x%04x format for all values. It's about consistency with other values (and most of the header) not a personal preference. 4) Separate define for reading shift value with an extre empty line. It's user for all AUXCTL registers in a bcm54xx_auxctl_read. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
-
Rafał Miłecki authored
We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by:
-
Rafał Miłecki authored
Starting with commit 5b4e2900 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by:
-
- 25 Jan, 2017 20 commits
-
-
Andrew Lunn authored
Previous patches have moved the temperature sensor code into the Marvell PHYs. A few now dead references to NET_DSA_HWMON were left behind. Go reap them. Reported-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Tomáš Pilař authored
PIO buffer allocation can fail for two valid reasons: - we've run out of them (results in -ENOSPC) - the NIC configuration doesn't support them (results in -EPERM) Since both these failures are expected netif_err is excessive. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
David S. Miller authored
Sunil Goutham says: ==================== thunderx: More ethtool support and BGX configuration changes These patches adds support to set queue sizes from ethtool and changes the way serdes lane configuration is done by BGX driver on 81/83xx platforms. ==================== Signed-off-by: -
Sunil Goutham authored
For DLMs and SLMs on 80/81/83xx, many lane configurations across different boards are coming up. Also kernel doesn't have any way to identify board type/info and since firmware does, just get rid of figuring out lane to serdes config and take whatever has been programmed by low level firmware. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
-
Sunil Goutham authored
Adds support to set Rx/Tx queue sizes from ethtool. Fixes an issue with retrieving queue size. Also sets SQ's CQ_LIMIT based on configured Tx queue size such that HW doesn't process SQEs when there is no sufficient space in CQ. Signed-off-by:
-
Willy Tarreau authored
Without TFO, any subsequent connect() call after a successful one returns -1 EISCONN. The last API update ensured that __inet_stream_connect() can return -1 EINPROGRESS in response to sendmsg() when TFO is in use to indicate that the connection is now in progress. Unfortunately since this function is used both for connect() and sendmsg(), it has the undesired side effect of making connect() now return -1 EINPROGRESS as well after a successful call, while at the same time poll() returns POLLOUT. This can confuse some applications which happen to call connect() and to check for -1 EISCONN to ensure the connection is usable, and for which EINPROGRESS indicates a need to poll, causing a loop. This problem was encountered in haproxy where a call to connect() is precisely used in certain cases to confirm a connection's readiness. While arguably haproxy's behaviour should be improved here, it seems important to aim at a more robust behaviour when the goal of the new API is to make it easier to implement TFO in existing applications. This patch simply ensures that we preserve the same semantics as in the non-TFO case on the connect() syscall when using TFO, while still returning -1 EINPROGRESS on sendmsg(). For this we simply tell __inet_stream_connect() whether we're doing a regular connect() or in fact connecting for a sendmsg() call. Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
David S. Miller authored
Wei Wang says: ==================== net/tcp-fastopen: Add new userspace API support The patch series is to add support for new userspace API for TCP fastopen sockets. In the current code, user has to call sendto()/sendmsg() with special flag MSG_FASTOPEN for TCP fastopen sockets. This API is quite different from the normal TCP socket API and can be cumbersome for applications to make use fastopen sockets. So this new patch introduces a new way of using TCP fastopen sockets which is similar to normal TCP sockets with a new sockopt TCP_FASTOPEN_CONNECT. More details about it is described in the third patch. (First 2 patches are preparations for the third patch.) ==================== Signed-off-by: -
Wei Wang authored
This patch adds a new socket option, TCP_FASTOPEN_CONNECT, as an alternative way to perform Fast Open on the active side (client). Prior to this patch, a client needs to replace the connect() call with sendto(MSG_FASTOPEN). This can be cumbersome for applications who want to use Fast Open: these socket operations are often done in lower layer libraries used by many other applications. Changing these libraries and/or the socket call sequences are not trivial. A more convenient approach is to perform Fast Open by simply enabling a socket option when the socket is created w/o changing other socket calls sequence: s = socket() create a new socket setsockopt(s, IPPROTO_TCP, TCP_FASTOPEN_CONNECT …); newly introduced sockopt If set, new functionality described below will be used. Return ENOTSUPP if TFO is not supported or not enabled in the kernel. connect() With cookie present, return 0 immediately. With no cookie, initiate 3WHS with TFO cookie-request option and return -1 with errno = EINPROGRESS. write()/sendmsg() With cookie present, send out SYN with data and return the number of bytes buffered. With no cookie, and 3WHS not yet completed, return -1 with errno = EINPROGRESS. No MSG_FASTOPEN flag is needed. read() Return -1 with errno = EWOULDBLOCK/EAGAIN if connect() is called but write() is not called yet. Return -1 with errno = EWOULDBLOCK/EAGAIN if connection is established but no msg is received yet. Return number of bytes read if socket is established and there is msg received. The new API simplifies life for applications that always perform a write() immediately after a successful connect(). Such applications can now take advantage of Fast Open by merely making one new setsockopt() call at the time of creating the socket. Nothing else about the application's socket call sequence needs to change. Signed-off-by:Wei Wang <weiwan@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Wei Wang authored
Remove __sk_dst_reset() in the failure handling because __sk_dst_reset() will eventually get called when sk is released. No need to handle it in the protocol specific connect call. This is also to make the code path consistent with ipv4. Signed-off-by:
-
Wei Wang authored
Refactor the cookie check logic in tcp_send_syn_data() into a function. This function will be called else where in later changes. Signed-off-by:
-
hayeswang authored
Replace rumtime with runtime. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Andrew Lunn authored
Replace spaces with tabs. Fix indentation to be multiples of tabs, not a mixture or tabs and spaces. Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF tracepoints This set adds tracepoints to BPF for better introspection and debugging. The first two patches are prerequisite for the actual third patch that adds the tracepoints. I think the first two are small and straight forward enough that they could ideally go via net-next, but I'm also open to other suggestions on how to route them in case that's not applicable (it would reduce potential merge conflicts on BPF side, though). For details, please see individual patches. ==================== Signed-off-by: -
Daniel Borkmann authored
This work adds a number of tracepoints to paths that are either considered slow-path or exception-like states, where monitoring or inspecting them would be desirable. For bpf(2) syscall, tracepoints have been placed for main commands when they succeed. In XDP case, tracepoint is for exceptions, that is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED return code, or when error occurs during XDP_TX action and the packet could not be forwarded. Both have been split into separate event headers, and can be further extended. Worst case, if they unexpectedly should get into our way in future, they can also removed [1]. Of course, these tracepoints (like any other) can be analyzed by eBPF itself, etc. Example output: # ./perf record -a -e bpf:* sleep 10 # ./perf script sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0 sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5 sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00] [...] sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00] swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER [1] https://lwn.net/Articles/705270/Signed-off-by: -
Daniel Borkmann authored
Add support for the __print_hex_str() macro that was added for tracing, so that user space tools such as perf can understand it as well. Signed-off-by:
-
Daniel Borkmann authored
For upcoming tracepoint support for BPF, we want to dump the program's tag. Format should be similar to __print_hex(), but without spacing. Add a __print_hex_str() variant for exactly that purpose that reuses trace_print_hex_seq(). Signed-off-by:
-
Eric Dumazet authored
tcp_add_backlog() can use skb_condense() helper to get better gains and less SKB_TRUESIZE() magic. This only happens when socket backlog has to be used. Some attacks involve specially crafted out of order tiny TCP packets, clogging the ofo queue of (many) sockets. Then later, expensive collapse happens, trying to copy all these skbs into single ones. This unfortunately does not work if each skb has no neighbor in TCP sequence order. By using skb_condense() if the skb could not be coalesced to a prior one, we defeat these kind of threats, potentially saving 4K per skb (or more, since this is one page fragment). A typical NAPI driver allocates gro packets with GRO_MAX_HEAD bytes in skb->head, meaning the copy done by skb_condense() is limited to about 200 bytes. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-24-01 The first seven patches from Or Gerlitz in this series further enhances the mlx5 SRIOV switchdev mode to support offloading IPv6 tunnels using the TC tunnel key set (encap) and unset (decap) actions. Or Gerlitz says: ======================== As part of doing this change, few cleanups are done in the IPv4 code, later we move to use the full tunnel key info provided to the driver as the key for our internal hashing which is used to identify cases where the same tunnel is used for encapsulating multiple flows. As done in the IPv4 case, the control path for offloading IPv6 tunnels uses route/neigh lookups and construction of the IPv6 tunnel headers on the encap path and matching on the outer hears in the decap path. The last patch of the series enlarges the HW FDB size for the switchdev mode, so it has now room to contain offloaded flows as many as min(max number of HW flow counters supported, max HW table size supported). ======================== Next to Or's series you can find several patches handling several topics. From Mohamad, add support for SRIOV VF min rate guarantee by using the TSAR BW share weights mechanism. From Or, Two patches to enable Eth VFs to query their min-inline value for user-space. for that we move a mlx5 low level min inline helper function from mlx5 ethernet driver into the core driver and then use it in mlx5_ib to expose the inline mode to rdma applications through libmlx5. From Kamal Heib, Reduce memory consumption on kdump kernel. From Shaker Daibes, code reuse in CQE compression control logic ==================== Signed-off-by: -
Dan Carpenter authored
We shuffled some code around and added some new case statements here and now "res" isn't initialized on all paths. Fixes: 01fd12bb ("tipc: make replicast a user selectable option") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jamal Hadi Salim authored
Introduce optional 128-bit action cookie. Like all other cookie schemes in the networking world (eg in protocols like http or existing kernel fib protocol field, etc) the idea is to save user state that when retrieved serves as a correlator. The kernel _should not_ intepret it. The user can store whatever they wish in the 128 bits. Sample exercise(showing variable length use of cookie) .. create an accept action with cookie a1b2c3d4 sudo $TC actions add action ok index 1 cookie a1b2c3d4 .. dump all gact actions.. sudo $TC -s actions ls action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 0 installed 5 sec used 5 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 cookie a1b2c3d4 .. bind the accept action to a filter.. sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1 ... send some traffic.. $ ping 127.0.0.1 -c 3 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms Signed-off-by:
-
- 24 Jan, 2017 3 commits
-
-
David S. Miller authored
Stephen Hemminger says: ==================== netvsc driver enhancements for net-next Lots of little things in here. Support for minor more ethtool control, negotiation of offload parameters with host (based on FreeBSD) and several cleanups. ==================== Signed-off-by: -
stephen hemminger authored
To improve performance, netvsc can call network stack directly and avoid the local backlog queue. This is safe since incoming packets are handled in softirq context already because the receive function callback is called from a tasklet. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
stephen hemminger authored
Use kernel for_each_clear_bit macro to simplify finding next available send section. Signed-off-by:
-
