- 23 Jun, 2020 16 commits
-
-
Laurent Pinchart authored
The input_bus_format field of struct dw_hdmi_plat_data is unused. Remove it. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-14-laurent.pinchart+renesas@ideasonboard.com
-
Laurent Pinchart authored
The .configure_phy() operation takes a dw_hdmi_plat_data pointer as a context argument. This differs from .mode_valid() that takes a custom private context pointer, causing possible confusion. Make the dw_hdmi_plat_data operations more consistent by passing the private context pointer to .configure_phy() as well. Signed-off-by:
-
Laurent Pinchart authored
Platform glue drivers for dw_hdmi may need to access device-specific data from their .mode_valid() implementation. They currently have no clean way to do so, and one driver hacks around it by accessing the dev_private data of the drm_device retrieved from the connector. Add a priv_data void pointer to the dw_hdmi_plat_data structure, and pass it to the .mode_valid() function. Signed-off-by:
-
Laurent Pinchart authored
When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations. Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid(). Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... } Signed-off-by:Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by:
-
Laurent Pinchart authored
The drm_hdmi_avi_infoframe_from_display_mode(), drm_hdmi_vendor_infoframe_from_display_mode() and drm_hdmi_avi_infoframe_quant_range() functions take a drm_connector that they don't modify. Mark it as const. Signed-off-by:
-
Laurent Pinchart authored
Make the connector creation optional to enable usage of the simple-bridge with the DRM bridge connector helper. Signed-off-by:
-
Laurent Pinchart authored
Instead of poking into the DT node of the next bridge for its DDC bus and implementing the .get_modes() and .detect() connector operations manually, retrieve the next bridge in the chain and delegate these operations to it. Signed-off-by:
-
Laurent Pinchart authored
The drm_bridge_get_edid() function is documented to return an error pointer on error. The underlying .get_edid() operation, however, returns NULL on error, and so do the drm_get_edid() and drm_do_get_edid() functions upon which .get_edid() is usually implemented. Make drm_bridge_get_edid() return NULL on error to be consistent. Signed-off-by:
-
Laurent Pinchart authored
Now that the driver supports all the connector-related bridge operations, make the connector creation optional. This enables usage of the adv7511 with the DRM bridge connector helper. Signed-off-by:
-
Laurent Pinchart authored
Implement the bridge connector-related .get_edid(), .detect() and .hpd_notify() operations, and report the related bridge capabilities. Output status detection is implemented using the same backend as for the DRM connector, but requires making mode retrieval at detection time optional as no pointer to the connector is available to the bridge .detect() operation. The reason for the need to retrieve modes at detection time is unclear to me, and this may benefit from further refactoring of hot plug handling code. Hot plug detection is notified through the bridge HPD notification framework when the bridge is used without creating a connector, and falls back to the existing implementation otherwise. CEC handling of disconnection is handled in the new .hpd_notify() operation in the new code path. Signed-off-by:
-
Laurent Pinchart authored
To prepare for making the connector creation optional, move the related code out of adv7511_bridge_attach() to a separate function. Signed-off-by:
-
Laurent Pinchart authored
To prepare for the implementation of the DRM bridge connector operations, move EDID read out of adv7511_get_modes() to a separate function. Signed-off-by:
-
Nirmoy Das authored
Function prepare_igt_frag() and get_insert_time() were casting signed value to unsigned value before returning error. So error check in igt_frag() would not work with unsigned return value from get_insert_time() compared against negative value. Addresses-Coverity: ("Unsigned compared against 0, no effect") Signed-off-by:Nirmoy Das <nirmoy.das@amd.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
Skipping just one branch of the tree is not the most effective approach. Instead use a macro to define the traversal functions and sort out both branch sides. This improves the performance of the unit tests by a factor of more than 4. Signed-off-by:
-
Christian König authored
Abort early if there isn't enough space to allocate from a subtree. Signed-off-by:
-
Christian König authored
Just some code cleanup. Signed-off-by:
-
- 22 Jun, 2020 4 commits
-
-
Thomas Zimmermann authored
Converts the ast driver to drm_info(), drm_err() and drm_WARN_*(). No functional changes are made. v2: * also convert WARN_*() macros Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
All upcasting from struct drm_device to struct ast_private is now performed via to_ast_private(). Using struct drm_device.dev_private is deprecated. The ast variable in ast_crtc_helper_atomic_check() is unused, so removed it. v2: * fix typo in commit message Signed-off-by:
-
Thomas Zimmermann authored
The driver cannot suspend before it has loaded completely. So the test for device pointers is not required. Remove it. v3: * s/them/it/ in commit message Signed-off-by:
-
Thomas Zimmermann authored
The ast driver contains code paths for AST 1180 chips. The chip is not supported and the rsp code has never been tested. Simplify the driver by removing the AST 1180 code. Signed-off-by:
-
- 21 Jun, 2020 4 commits
-
-
Max Merchel authored
Add support for the Tianma Micro-electronics TM070JVHG33 7.0" WXGA display to panel-simple. Signed-off-by:
Max Merchel <Max.Merchel@tq-group.com> Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by:
-
Michael Krummsdorf authored
Add support for the CDTech Electronics displays S070PWS19HP-FC21 (7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple. Signed-off-by:
Michael Krummsdorf <michael.krummsdorf@tq-group.com> Signed-off-by:
-
Matthias Schiffer authored
Add the Tianma Micro-electronics TM070JVHG33 7.0" WXGA display to the panel-simple compatible list. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Matthias Schiffer authored
Add the CDTech Electronics displays S070PWS19HP-FC21 (7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to the panel-simple compatible list. Signed-off-by:
-
- 20 Jun, 2020 6 commits
-
-
Ricardo Cañuelo authored
This fixes a bug in the calculation of the setup and hold times based on the deskew configuration. Signed-off-by:
Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Ricardo Cañuelo authored
The tfp410 has a data de-skew feature that allows the user to compensate the skew between IDCK and the pixel data and control signals. In the driver, the setup and hold times are calculated from the de-skew value. This retrieves the deskew value from the DT using the proper datatype and range check as described by the binding (u32 from 0 to 7). This fix results from a change in the ti,tfp410 DT binding. Signed-off-by:
-
Ricardo Cañuelo authored
This changes how the 'ti,deskew' property is defined. It's now an unsigned value from 0 to 7 instead of a signed value from -4 to 3. Until the dtc carries the integer sign through to the yaml output it's easier to define signed types as unsigned. Signed-off-by:
-
Ricardo Cañuelo authored
Convert the DT binding documentation for the TI TFP410 DPI-to-DVI encoder to json-schema. Signed-off-by:
-
Dmitry Osipenko authored
The DRM panel bridge core requires connector type to be set up properly, otherwise it rejects the panel. The missing connector type problem popped up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in order to test whether panel's rotation property work properly using panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses CLAA070WP03XG display panel. The NVIDIA Tegra DRM driver recently gained DRM bridges support for the RGB output and now driver wraps directly-connected panels into DRM bridge. Hence all panels should have connector type set properly now, otherwise the panel's wrapping fails. This patch adds missing connector types for the LVDS panels that are found on NVIDIA Tegra devices: 1. AUO B101AW03 2. Chunghwa CLAA070WP03XG 3. Chunghwa CLAA101WA01A 4. Chunghwa CLAA101WB01 5. EDT ET057090DHU 6. Innolux N156BGE L21 7. Samsung LTN101NT05 Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Wei Yongjun authored
It's not necessary to unregister backlight device which registered with devm_backlight_device_register(). Fixes: 12a6cbd4 ("drm/panel: otm8009a: Use new backlight API") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 19 Jun, 2020 7 commits
-
-
Manasi Navare authored
DP sink device sets the Ignore MSA bit in its DP_DOWNSTREAM_PORT_COUNT register to indicate its ability to ignore the MSA video timing parameters and its ability to support seamless video timing change over a range of timing exposed by DisplayID and EDID. This is required for the sink to indicate that it is Adaptive sync capable. v3: * Fi the typo in commit message (Manasi) v2: * Rename to describe what the function does (Jani Nikula) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200619212356.19285-2-bhanuprakash.modem@intel.com
-
Colin Ian King authored
Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a long value leads to a potential integer overflow. Fix this by using the BIT macro to perform the shift to avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: ad49f860 ("drm/arm: Add support for Mali Display Processors") Signed-off-by:Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Ben Davis authored
AFBC has a mode that guarantees use of AFBC with an uncompressed payloads, we add a new modifier to support this mode. V2: updated modifier comment Signed-off-by:
Ben Davis <ben.davis@arm.com> Acked-by:
-
Ben Davis authored
DRM_FORMAT_NV15 is a 2 plane format suitable for linear and 16x16 block-linear memory layouts (DRM_FORMAT_MOD_SAMSUNG_16_16_TILE). The format is similar to P010 with 4:2:0 sub-sampling but has no padding between components. Instead, luminance and chrominance samples are grouped into 4s so that each group is packed into an integer number of bytes: YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes The '15' suffix refers to the optimum effective bits per pixel which is achieved when the total number of luminance samples is a multiple of 8. Q410 and Q401 are both 3 plane non-subsampled formats with 16 bits per component, but only 10 bits are used and 6 are padded. 'Q' is chosen as the first letter to denote 3 plane YUV444, (and is the next letter along from P which is usually 2 plane). V2: Updated block_w of NV15 to {4, 2, 0} V3: Updated commit message to include specific modifier name NV15: Tested-by:Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Brian Starkey <brian.starkey@arm.com> Signed-off-by:
-
Denis Efremov authored
Use kvfree() to free bo->sgts, because the memory is allocated with kvmalloc_array() in panfrost_mmu_map_fault_addr(). Fixes: 187d2929 ("drm/panfrost: Add support for GPU heap allocations") Cc: stable@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Dinghao Liu authored
The caller expects panfrost_job_hw_submit() to increase runtime PM usage counter. The refcount decrement on the error branch of WARN_ON() will break the counter balance and needs to be removed. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
-
Steven Price authored
The calls to panfrost_devfreq_record_busy() and panfrost_devfreq_record_idle() must be balanced to ensure that the devfreq utilisation is correctly reported. But there are two cases where this doesn't work correctly. In panfrost_job_hw_submit() if pm_runtime_get_sync() fails or the WARN_ON() fires then no call to panfrost_devfreq_record_busy() is made, but when the job times out the corresponding _record_idle() call is still made in panfrost_job_timedout(). Move the call up to ensure that it always happens. Secondly panfrost_job_timedout() only makes a single call to panfrost_devfreq_record_idle() even if it is cleaning up multiple jobs. Move the call inside the loop to ensure that the number of _record_idle() calls matches the number of _record_busy() calls. Fixes: 9e62b885 ("drm/panfrost: Simplify devfreq utilisation tracking") Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
-
- 18 Jun, 2020 3 commits
-
-
Douglas Anderson authored
The ti_sn_bridge_gpio_set() got the return value of regmap_update_bits() but didn't check it. The function can't return an error value, but we should at least print a warning if it didn't work. This fixes a compiler warning about setting "ret" but not using it. Fixes: 27ed2b3f ("drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Douglas Anderson authored
This fixes a kernel doc warning due to a typo: warning: Function parameter or member 'ln_polrs' not described in 'ti_sn_bridge' Fixes: 5bebaead ("drm/bridge: ti-sn65dsi86: Implement lane reordering + polarity") Signed-off-by:
-
Douglas Anderson authored
When building we were getting an error: warning: cannot understand function prototype: 'const unsigned int ti_sn_bridge_dp_rate_lut[] = ' Arrays aren't supposed to be marked with "/**" kerneldoc comments. Fix. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by:
-
