- 14 May, 2012 34 commits
-
-
Lars-Peter Clausen authored
When calling ade7758_spi_read_burst we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
When calling adis16260_read_ring_data we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
When calling __lis3l02dq_write_data_ready_config we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
When calling adis16240_read_ring_data we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
When calling adis16209_read_ring_data we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
When calling adis16204_read_ring_data we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
When calling adis16203_read_ring_data we pass the device struct of embedded in the IIO device only to look up the IIO device from the device struct again right away. This patch changes the code to pass the IIO device directly. Signed-off-by:
-
Lars-Peter Clausen authored
Replace open-coded instances of getting a iio_dev struct from a device struct with dev_to_iio_dev(). Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds a helper function for retriving a iio_dev struct from a device struct. Currently we open-code this in two different ways. One is using dev_get_drvdata on the device and the other is using container_of. The new helper function uses the container_of solution as it creates slightly smaller code and also will eventually free up the drvdata pointer for usage by invidual drivers. Signed-off-by:
-
Justin P. Mattock authored
Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
Larry Finger authored
In commit ee6aeff7, a swatch warning was fixed by moving some code inside an if block that is executed only when the pointer padapter is not NULL. In fact, padapter can never be NULL and the corect fix should have been the removal of the test of padapter. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Lars-Peter Clausen authored
iio_device_free has to be called regardless of whether the device has been registered or not when freeing it. Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
-
Maxime Ripard authored
This patch adds platform data for the AT91 ADC driver support for the AT91SAM9M10G45-EK board. Signed-off-by:
-
Maxime Ripard authored
This patch adds platform data for the AT91 ADC driver support for the AT91SAM9G20-EK board. Signed-off-by:
-
Maxime Ripard authored
Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK and AT91SAM9X5 family boards. It has support for both software and hardware triggers. Signed-off-by:
-
Maxime Ripard authored
The AT91 SoCs often embeds an ADC. This patch adds the needed platform data to specify the informations required by the driver to work properly. For now, we only need the reference voltage and which channels are available on the board. Signed-off-by:
-
Michael Hennerich authored
Changes since V1: Apply review feedback: Introduce and use IIO_CHAN_INFO_HARDWAREGAIN Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB Modify out of staging include paths. Convert to new iio core API naming. Changes since V2: more sanity checking in write_raw Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Dan Magenheimer authored
RAMster does many zcache-like things. In order to avoid major merge conflicts at 3.4, ramster used lzo1x directly for compression and retained a local copy of xvmalloc, while zcache moved to the new zsmalloc allocator and the crypto API. This patch moves ramster forward to use zsmalloc and crypto. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Johannes Thumshirn authored
Kill unused debugging macro CHECKPOINT Signed-off-by:
Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by:
-
H Hartley Sweeten authored
Currently the sysfs device attributes are created by the comedi core after each comedi device is created. This can lead to a race condition where userspace gets an add event before the files are created. Register the device attributes with the comedi class so that the driver core handles creating them and we avoid the race. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
-
Anton Vorontsov authored
A corresponding function to persistent_ram_new(). Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by:
-
Anton Vorontsov authored
This includes devices' memory (e.g. framebuffers or memory mapped EEPROMs on a local bus), as well as the normal RAM that we don't use for the main memory. For the normal (but unused) ram we could use kmaps, but this assumes highmem support, so we don't bother and just use the memory via ioremap. As a side effect, the following hack is possible: when used together with pstore_ram (new ramoops) module, we can limit the normal RAM region with mem= and then point ramoops to use the rest of the memory, e.g. mem=128M ramoops.mem_address=0x8000000 Sure, we could just reserve the region with memblock_reserve() early in the arch/ code, and then register a pstore_ram platform device pointing to the reserved region. It's still a viable option if platform wants to do so. Also, we might want to use IO accessors in case of a real device, but for now we don't bother (the old ramoops wasn't using it either, so at least we don't make things worse). Signed-off-by:
-
Anton Vorontsov authored
Factor out vmap logic out of persistent_ram_buffer_map(), this will make the code a bit more understandable when we'll add support for non-bootmem memory. Signed-off-by:
-
Anton Vorontsov authored
The routine just creates a persistent ram zone at a specified address. For persistent_ram_init_ringbuffer() we'd need to add a 'struct persistent_ram' to the global list, and associate it with a device. We don't need all this complexity in pstore_ram, so we introduce the simple function. Signed-off-by:
-
Anton Vorontsov authored
Factor post init logic out of __persistent_ram_init(), we'll need it for the new persistent_ram_new() routine. Signed-off-by:
-
Anton Vorontsov authored
This is a longstanding bug, almost unnoticeable when calling persistent_ram_write() for small buffers. But when called for large data buffers, the write routine behaves incorrectly, as the size may never update: instead of clamping the size to the maximum buffer size, buffer_size_add_clamp() returns an error (which is never checked by the write routine, btw). To fix this, we now use buffer_size_add() that actually clamps the size to the max value. Also remove buffer_size_add_clamp(), it is no longer needed. Signed-off-by:
Colin Cross <ccross@android.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Anton Vorontsov authored
The 'node' struct member is unused, so remove it. Signed-off-by:
-
- 10 May, 2012 6 commits
-
-
Tim Bird authored
Fix a few sparse warnings, and improve whitespace. Cc: Brian Swetland <swetland@google.com> Signed-off-by:
Tim Bird <tim.bird@am.sony.com> Signed-off-by:
-
Tim Bird authored
This changes the log initialization to be dynamic, but still at boot time. These changes are a predecessor to implementing runtime allocation and freeing of logs, to make the Android logger less hard-coded. Change from a fixed set of static log structures, to allocation at init time into a list. Return proper error numbers on log allocation failure. Cc: Brian Swetland <swetland@google.com> Signed-off-by:
-
Paul Gortmaker authored
This driver had headers like big_endian.h, little_endian.h, swab.h and yet we can throw them all in the trash can and the thing still builds on x86-64 and ppc, just by deleting the references to the deleted files. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Paul Gortmaker <paul.gortmaker@windriver.com>
-
Paul Gortmaker authored
This driver should not be carrying around ancient copies of headers like <linux/ip.h> for its own use. Mapping it onto the mainline one uncovers no build issues. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: -
Paul Gortmaker authored
This driver should not be carrying around ancient copies of headers like <linux/if_ether.h> for its own use. Mapping it onto the mainline one uncovers no build issues. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: -
Oleksij Rempel authored
Signed-off-by:
Oleksij Rempel <bug-track@fisher-privat.net> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
