All the trace event flags have comments but the IGNORE_ENABLE flag
which is set for ftrace internal events that should not be enabled
via the debugfs "enable" file. That is, if the top level enable file
is set, it will enable all events. It use to just check the ftrace
event call descriptor "reg" field and skip those whithout it, but now
some ftrace internal events have a reg field but still need to be
skipped. The flag was created to ignore those events.

Now document it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The move of blocked readers to the ring buffer left out the
init of the wait queue that is used. Tests missed this due to running
stress tests against the buffers, which didn't allow for any
readers to end up waiting. Running a simple read and wait triggered
a bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.

Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.comReported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The new multi-buffers added a descriptor that kept track of module
events, and the directories they use, with struct ftace_module_file_ops.
This is used to add a ref count to keep modules from unloading while
their files are being accessed.

As the descriptor is only needed when CONFIG_MODULES is enabled, it
is only declared when the config is enabled. But that struct is
dereferenced in a few areas outside the #ifdef CONFIG_MODULES.

By adding some helper routines and moving code around a little,
events can be compiled again without modules.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

With the conversion of the data array to per cpu, sparse now complains
about the use of per_cpu_ptr() on the variable. But The variable is
allocated with alloc_percpu() and is fine to use. But since the structure
that contains the data variable does not annotate it as such, sparse
gives out a lot of false warnings.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

These two functions are called during kernel boot only.

Link: http://lkml.kernel.org/r/51258796.7020704@huawei.comSigned-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Those functions are called either during kernel boot or module init.

Before:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1208k freed
Freeing unused kernel memory: 1360k freed
Freeing unused kernel memory: 1960k freed

After:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1236k freed
Freeing unused kernel memory: 1388k freed
Freeing unused kernel memory: 1960k freed

Link: http://lkml.kernel.org/r/5125877D.5000201@huawei.comSigned-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Move duplicate code in event print functions to a helper function.

This shrinks the size of the kernel by ~13K.

   text    data     bss     dec     hex filename
6596137 1743966 10138672        18478775        119f6b7 vmlinux.o.old
6583002 1743849 10138672        18465523        119c2f3 vmlinux.o.new

Link: http://lkml.kernel.org/r/51258746.2060304@huawei.comSigned-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Move the logic to wake up on ring buffer data into the ring buffer
code itself. This simplifies the tracing code a lot and also has the
added benefit that waiters on one of the instance buffers can be woken
only when data is added to that instance instead of data added to
any instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

If the ring buffer is empty, a read to trace_pipe_raw wont block.
The tracing code has the infrastructure to wake up waiting readers,
but the trace_pipe_raw doesn't take advantage of that.

When a read is done to trace_pipe_raw without the O_NONBLOCK flag
set, have the read block until there's data in the requested buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_pipe_raw never implemented polling and this was casing
issues for several utilities. This is now implemented.

Blocked reads still are on the TODO list.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently only the splice NONBLOCK flag is checked to determine if
the splice read should block or not. But the file descriptor NONBLOCK
flag also needs to be checked.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The names used to display the field and type in the event format
files are copied, as well as the system name that is displayed.

All these names are created by constant values passed in.
If one of theses values were to be removed by a module, the module
would also be required to remove any event it created.

By using the strings directly, we can save over 100K of memory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The event structures used by the trace events are mostly persistent,
but they are also allocated by kmalloc, which is not the best at
allocating space for what is used. By converting these kmallocs
into kmem_cache_allocs, we can save over 50K of space that is
permanently allocated.

After boot we have:

 slab name          active allocated size
 ---------          ------ --------- ----
ftrace_event_file    979   1005     56   67    1
ftrace_event_field   2301   2310     48   77    1

The ftrace_event_file has at boot up 979 active objects out of
1005 allocated in the slabs. Each object is 56 bytes. In a normal
kmalloc, that would allocate 64 bytes for each object.

 1005 - 979  = 26 objects not used
 26 * 56 = 1456 bytes wasted

But if we used kmalloc:

 64 - 56 = 8 bytes unused per allocation
 8 * 979 = 7832 bytes wasted

 7832 - 1456 = 6376 bytes in savings

Doing the same for ftrace_event_field where there's 2301 objects
allocated in a slab that can hold 2310 with 48 bytes each we have:

 2310 - 2301 = 9 objects not used
 9 * 48 = 432 bytes wasted

A kmalloc would also use 64 bytes per object:

 64 - 48 = 16 bytes unused per allocation
 16 * 2301 = 36816 bytes wasted!

 36816 - 432 = 36384 bytes in savings

This change gives us a total of 42760 bytes in savings. At least
on my machine, but as there's a lot of these persistent objects
for all configurations that use trace points, this is a net win.

Thanks to Ezequiel Garcia for his trace_analyze presentation which
pointed out the wasted space in my code.

Cc: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

With the new descriptors used to allow multiple buffers in the
tracing directory added, the kernel command line parameter
trace_events=... no longer works. This is because the top level
(global) trace array now has a list of descriptors associated
with the events and the files in the debugfs directory. But in
early bootup, when the command line is processed and the events
enabled, the trace array list of events has not been set up yet.

Without the list of events in the trace array, the setting of
events to record will fail because it would not match any events.

The solution is to set up the top level array in two stages.
The first is to just add the ftrace file descriptors that just point
to the events. This will allow events to be enabled and start tracing.
The second stage is called after the filesystem is set up, and this
stage will create the debugfs event files and directories associated
with the trace array events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a method to the hijacked dentry descriptor of the
"instances" directory to allow for rmdir to remove an
instance of a multibuffer.

Example:

  cd /debug/tracing/instances
  mkdir hello
  ls
hello/
  rmdir hello
  ls

Like the mkdir method, the i_mutex is dropped for the instances
directory. The instances directory is created at boot up and can
not be renamed or removed. The trace_types_lock mutex is used to
synchronize adding and removing of instances.

I've run several stress tests with different threads trying to
create and delete directories of the same name, and it has stood
up fine.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the interface ("instances" directory) to add multiple buffers
to ftrace. To create a new instance, simply do a mkdir in the
instances directory:

This will create a directory with the following:

 # cd instances
 # mkdir foo
 # ls foo
buffer_size_kb        free_buffer  trace_clock    trace_pipe
buffer_total_size_kb  set_event    trace_marker   tracing_enabled
events/               trace        trace_options  tracing_on

Currently only events are able to be set, and there isn't a way
to delete a buffer when one is created (yet).

Note, the i_mutex lock is dropped from the parent "instances"
directory during the mkdir operation. As the "instances" directory
can not be renamed or deleted (created on boot), I do not see
any harm in dropping the lock. The creation of the sub directories
is protected by trace_types_lock mutex, which only lets one
instance get into the code path at a time. If two tasks try to
create or delete directories of the same name, only one will occur
and the other will fail with -EEXIST.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.

By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).

This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).

The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.

Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).

Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).

There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).

By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Now, "snapshot" file returns success on a reset of snapshot buffer
even if the buffer wasn't allocated, instead of returning EINVAL.
This patch updates snapshot desctiption according to the change.

Link: http://lkml.kernel.org/r/51399409.4090207@hitachi.comSigned-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.

To free the snapshot buffer, a '0' is written into the snapshot file.

To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.

Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.

Here's what it looked like before:

 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

Here's what it looks like now:

 # tracer: nop
 #
 #
 # * Snapshot is freed *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent

Pull an ftrace Kconfig help text fix from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Cc: stable@vger.kernel.org
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent

Pull two fixes from Steven Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Intel IvyBridge processor has different constraints compared
to SandyBridge. Therefore it needs its own contraint table.
This patch adds the constraint table.

Without this patch, the events listed in the patch may not be
scheduled correctly and bogus counts may be collected.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: namhyung.kim@lge.com
Link: http://lkml.kernel.org/r/1361355312-3323-1-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull async changes from Tejun Heo:
 "These are followups for the earlier deadlock issue involving async
  ending up waiting for itself through block requesting module[1].  The
  following changes are made by these commits.

   - Instead of requesting default elevator on each request_queue init,
     block now requests it once early during boot.

   - Kmod triggers warning if invoked from an async worker.

   - Async synchronization implementation has been reimplemented.  It's
     a lot simpler now."

* 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  async: initialise list heads to fix crash
  async: replace list of active domains with global list of pending items
  async: keep pending tasks on async_domain and remove async_pending
  async: use ULLONG_MAX for infinity cookie value
  async: bring sanity to the use of words domain and running
  async, kmod: warn on synchronous request_module() from async workers
  block: don't request module during elevator init
  init, block: try to load default elevator module early during boot

Pull workqueue changes from Tejun Heo:
 "A lot of reorganization is going on mostly to prepare for worker pools
  with custom attributes so that workqueue can replace custom pool
  implementations in places including writeback and btrfs and make CPU
  assignment in crypto more flexible.

  workqueue evolved from purely per-cpu design and implementation, so
  there are a lot of assumptions regarding being bound to CPUs and even
  unbound workqueues are implemented as an extension of the model -
  workqueues running on the special unbound CPU.  Bulk of changes this
  round are about promoting worker_pools as the top level abstraction
  replacing global_cwq (global cpu workqueue).  At this point, I'm
  fairly confident about getting custom worker pools working pretty soon
  and ready for the next merge window.

  Lai's patches are replacing the convoluted mb() dancing workqueue has
  been doing with much simpler mechanism which only depends on
  assignment atomicity of long.  For details, please read the commit
  message of 0b3dae68 ("workqueue: simplify is-work-item-queued-here
  test").  While the change ends up adding one pointer to struct
  delayed_work, the inflation in percentage is less than five percent
  and it decouples delayed_work logic a lot more cleaner from usual work
  handling, removes the unusual memory barrier dancing, and allows for
  further simplification, so I think the trade-off is acceptable.

  There will be two more workqueue related pull requests and there are
  some shared commits among them.  I'll write further pull requests
  assuming this pull request is pulled first."

* 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (37 commits)
  workqueue: un-GPL function delayed_work_timer_fn()
  workqueue: rename cpu_workqueue to pool_workqueue
  workqueue: reimplement is_chained_work() using current_wq_worker()
  workqueue: fix is_chained_work() regression
  workqueue: pick cwq instead of pool in __queue_work()
  workqueue: make get_work_pool_id() cheaper
  workqueue: move nr_running into worker_pool
  workqueue: cosmetic update in try_to_grab_pending()
  workqueue: simplify is-work-item-queued-here test
  workqueue: make work->data point to pool after try_to_grab_pending()
  workqueue: add delayed_work->wq to simplify reentrancy handling
  workqueue: make work_busy() test WORK_STRUCT_PENDING first
  workqueue: replace WORK_CPU_NONE/LAST with WORK_CPU_END
  workqueue: post global_cwq removal cleanups
  workqueue: rename nr_running variables
  workqueue: remove global_cwq
  workqueue: remove worker_pool->gcwq
  workqueue: replace for_each_worker_pool() with for_each_std_worker_pool()
  workqueue: make freezing/thawing per-pool
  workqueue: make hotplug processing per-pool
  ...

Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo:
 "This is part of on-going cleanups to remove / minimize usages of
  workqueue interfaces which are deprecated and/or misleading.

  This round drops a number of usages of [delayed_]work_pending(), which
  are dangerous as they lack any form of synchronization and thus often
  lead to buggy / unnecessary code.  There are a couple legitimate use
  cases in kernel.  Hopefully, they can be converted and
  [delayed_]work_pending() can be removed completely.  Even if not,
  removing most of misuses should make it more difficult to find
  examples of misuses and thus slow down growth of them.

  These changes are independent from other workqueue changes."

* 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  wimax/i2400m: fix i2400m->wake_tx_skb handling
  kprobes: fix wait_for_kprobe_optimizer()
  ipw2x00: simplify scan_event handling
  video/exynos: don't use [delayed_]work_pending()
  tty/max3100: don't use [delayed_]work_pending()
  x86/mce: don't use [delayed_]work_pending()
  rfkill: don't use [delayed_]work_pending()
  wl1251: don't use [delayed_]work_pending()
  thinkpad_acpi: don't use [delayed_]work_pending()
  mwifiex: don't use [delayed_]work_pending()
  sja1000: don't use [delayed_]work_pending()

Pull x86 UV3 support update from Ingo Molnar:
 "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming
  third major iteration and upscaling of the SGI UV supercomputing
  platform."

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3
  x86, uv, uv3: Check current gru hub support for SGI UV3
  x86, uv, uv3: Update Time Support for SGI UV3
  x86, uv, uv3: Update x2apic Support for SGI UV3
  x86, uv, uv3: Update Hub Info for SGI UV3
  x86, uv, uv3: Update ACPI Check to include SGI UV3
  x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)

Pull x86 platform changes from Ingo Molnar:

 - Support for the Technologic Systems TS-5500 platform, by Vivien
   Didelot

 - Improved NUMA support on AMD systems:

   Add support for federated systems where multiple memory controllers
   can exist and see each other over multiple PCI domains.  This
   basically means that AMD node ids can be more than 8 now and the code
   handling this is taught to incorporate PCI domain into those IDs.

 - Support for the Goldfish virtual Android emulator, by Jun Nakajima,
   Intel, Google, et al.

 - Misc fixlets.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add TS-5500 platform support
  x86/srat: Simplify memory affinity init error handling
  x86/apb/timer: Remove unnecessary "if"
  goldfish: platform device for x86
  amd64_edac: Fix type usage in NB IDs and memory ranges
  amd64_edac: Fix PCI function lookup
  x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
  x86, AMD, NB: Add multi-domain support